High quality sub-monolayer,monolayer, and bilayer graphene on Ru（0001）

High quality sub-monolayer, monolayer, and bilayer graphene were grown on Ru(0001). For the sub-monolayer graphene, the size of graphene islands with zigzag edges can be controlled by the dose of ethylene exposure. By increasing the dose of ethylene to 100 Langmuir at a high substrate temperature(800℃), high quality single-crystalline monolayer graphene was synthesized on Ru(0001). High quality bilayer graphene was formed by further increasing the dose of ethylene while reducing the cooling rate to 5℃/min. Raman spectroscopy revealed the vibrational states of graphene, G and 2D peaks appeared only in the bilayer graphene, which demonstrates that it behaves as the intrinsic graphene. Our present work affords methods to produce high quality sub-monolayer, monolayer, and bilayer graphene, both for basic research and applications.     

Formation of graphene on Ru（0001） surface

We report on the formation of a graphene monolayer on a Ru(0001) surface by annealing the Ru(0001) crystal. The samples are characterized by scanning tunnelling microscopy (STM) and Auger electron spectroscopy (AES). STM images show that the Moir\'{e} pattern is caused by the graphene layer mismatched with the underlying Ru(0001) surface and has an $N\times N$ superlattice. It is further found that the graphene monolayer on a Ru(0001) surface is very stable at high temperatures. Our results provide a simple and convenient method to produce a graphene monolayer on the Ru(0001) surface, which is used as a template for fabricating functional nanostructures needed in future nano devices and catalysis.     

Adsorptions and diffusions of carbon atoms on the surface and in the subsurface of Co （200）： A first-principles density-functional study

First-principles calculations based on density functional theory are used to investigate the adsorptions and diffusions of carbon atoms on the surface and in the subsurface of Co(200). The preferred site for the carbon atom on the surface is the hollow site, and the preferred site in the subsurface is the octahedral site. There is charge transfer from the surface to the adsorbed carbon atom, and for the most favorable adsorbed structure the charge transfer is largest. Moreover, the energy barriers for the diffusions of carbon atoms on the surface and from the surface into the subsurface and then back to the surface are calculated in detail. The results indicate that the energy barrier for the diffusion of carbon atoms on the surface is comparable to that from the subsurface to the surface. The results imply that both the direct surface nucleation and the surface segregation from Co bulk can be observed in the chemical vapor deposition growth of graphene on Co(200)substrate, which can gain a new insight into the growth mechanism of graphene.     

Dissociations of O2 molecules on ultrathin Pb（111） films： first-principles plane wave calculations

Using first-principles calculations,we systematically study the dissociations of O₂ molecules on different ultrathin Pb（111） films.According to our previous work revealing the molecular adsorption precursor states for O₂,we further explore why there are two nearly degenerate adsorption states on Pb（111） ultrathin films,but no precursor adsorption states existing at all on Mg（0001） and Al（111） surfaces.The reason is concluded to be the different surface electronic structures.For the O₂ dissociation,we consider both the reaction channels from gas-like and molecularly adsorbed O₂ molecules.We find that the energy barrier for O₂ dissociation from the molecular adsorption precursor states is always smaller than that from O₂ gas.The most energetically favorable dissociation process is found to be the same on different Pb（111） films,and the energy barriers are found to be influenced by the quantum size effects of Pb（111） films.     

Water adsorption on the Be（0001） surface： from monomer to trimer adsorption

In this paper,the density functional theory has been used to perform a comparative theoretical study of water monomer,dimer,trimer,and bilayer adsorptions on the Be(0001) surface.In our calculations,the adsorbed water molecules are energetically favoured adsorbed on the atop sites,and the dimer adsorption is found to be the most stable with a peak adsorption energy of ～ 437 meV.Further analyses have revealed that the essential bonding interaction between the water monomer and the metal substrate is the hybridization of the water 3a 1-like molecular orbital with the (s,p z) orbitals of the surface beryllium atoms.While in the case of the water dimer adsorption,the 1b 1-like orbital of the H2O molecule plays a dominant role.     

Monte Carlo Investigation of Adsorption Stage of O on Ru（0001）：a Study of a Lattice Model

The adsorption of O on Ru(0001) is studied by means of Monte Carlo simulation of lattice gas model on a triangular lattice. A recent STM study shows that at low coverage the p(2×2) structure grows via island formation but the p(2×1) structure is abruptly formed at a critical coverage. Moreover, it also shows that there is a coexistence of the p(2×2) and p(2×1) structures. The above results seem not to coincide with the former studies of the system by both the LEED and Monte Carlo simulation. We therefore carried out the Monte Carlo study for the system again in the present paper and found that our simulation almost agrees with the results of the STM.     

First-principles study of the （001） surface of cubic PbHfO3 and BaHfO3

Using first-principles techniques,we investigate the(001) surfaces of cubic PbHfO3(PHO) and BaHfO3(BHO) terminated with both AO(A=Pb and Ba) and HfO2.Surface structure,partial density of states,band structure,and surface energy are obtained.The BaO surface is found to be similar to its counterpart in BHO.For the HfO2-terminated surface of cubic PHO,the largest relaxation appears on the second-layer atoms but not on the first-layer ones.The analysis of the structure relaxation parameters reveals that the rumpling of the(001) surface for PHO is stronger than that for BHO.The surface thermodynamic stability is explored,and it is found that both the PbO-and the BaO-terminated surfaces are more stable than the HfO2-terminated surfaces for PHO and BHO,respectively.The surface energy calculations show that the(001) surface of PHO is more easily constructed than that of BHO.     

Theoretical study of ZnO adsorption and bonding on Al_2O_3(0001) surface

Sapphire (α-Al2O3) and silicon (Si) are widely applied as the substrates of the highquality ZnO thin films prepared by pulse laser deposition (PLD) and molecule beamepitaxy (MBE) technology. The adhesion, diffusivity, and bonding of the particles on thesubstrates play a significant role in the forming and initial growing of nucleation for filmgrowth, and directly influence the quality of the entire thin films[1]. No sufficient studiesand experiments are available on the surface atomic str…     

Electronic structures and magnetism of Fe nanowires on Cu（001） and Ag（O01）： A first-principles study

The electronic structures and magnetism of Fe nanowires along the [110] direction on Cu（001） and Ag（001） [Fe（nw）/Cu（001） and Fe（nw）/Ag（001）] are investigated by using the all-electron full-potential linearized augmented plane wave method in the generalized gradient approximation. It is found that the magnetic moment of Fe atom for the Fe（nw）/Cu（001） is 2.99#B, which is slightly smaller than that （3.02μB） for the Fe（nw）/Ag（001） but much larger than that （2.22μB） for the bcc iron. The great enhancement of magnetic moment in the Fe nanowires can be explained by the Fe d-band narrowing and enhancement of the spin-splitting due to a reduction in coordination number, From the calculated spin-polarized layer-projected density of states, it is found that the Fe 3d-states are strongly hybridized with the adjacent Cu 3d-states in the Fe（nw）/Cu（001）, and there exists a strong hybridization between the Fe sp-and the adjacent Ag 4d-states in the Fe（nw）/Ag（001）.     

First-principles study of the electronic and optical properties of the （Y,N）-codoped anatase TiO2 photocatalyst

First-principles plane-wave pseudopotential calculations are performed to study the geometrical structures,formation energies,and electronic and optical properties of Y-doped,N-doped,and(Y,N)-codoped TiO 2.The calculated results show that Y and N codoping leads to lattice distortion,easier separation of photogenerated electron-hole pairs and band gap narrowing.The optical absorption spectra indicate that an obvious red-shift occurs upon Y and N codoping,which enhances visible-light photocatalytic activity.     

Ar adsorptions on Al （111） and Ir （111） surfaces： a first-principles study

We investigate the adsorptions of Ar on Al (111) and Ir (111) surfaces at the four high symmetry sites,i.e.,top,bridge,fcc-and hcp-hollow sites at the coverage of 0.25 monolayer (ML) using the density functional theory within the generalized gradient approximation of Perdew,Burke and Ernzerhof functions.The geometric structures,the binding energies,the electronic properties of argon atoms adsorbed on Al (111) and Ir (111) surfaces,the difference in electron density between on the Al (111) surface and on the Ir (111) surface and the total density of states are calculated.Our studies indicate that the most stable adsorption site of Ar on the Al (111) surface is found to be the fcc-hollow site for the (2 × 2) structure.The corresponding binding energy of an argon atom at this site is 0.538 eV/Ar atom at a coverage of 0.25 ML.For the Ar adsorption on Ir (111) surface at the same coverage,the most favourable site is the hcp-hollow site,with a corresponding binding energy of 0.493 eV.The total density of states (TDOS) is analysed for Ar adsorption on Al (111) surface and it is concluded that the adsorption behaviour is dominated by the interaction between 3s,3p orbits of Ar atom and the 3p orbit of the base Al metal and the formation of sp hybrid orbital.For Ar adsorption on Ir (111) surface,the conclusion is that the main interaction in the process of Ar adsorption on Ir (111) surface comes from the 3s and 3p orbits of argon atom and 5d orbit of Ir atom.     

CO adsorption on small Aun（n=1-7） clusters supported on a reduced rutile TiO2（110） surface:a first-principles study

CO adsorption on small Au n(n = 1-7) clusters which are supported by a partially reduced rutile TiO 2(110) surface has been investigated by the first-principles method.The low coordinated sites of Au clusters are favorable for CO adsorption.CO-Au n-TiO 2 system displays surface magnetism.There is a strong interaction between the adsorbed CO molecule and the supported Au clusters.     

A density-functional theory investigation on desorption of O2 on Sn（111） and its comparison with initial oxidation on the X（111） （X=Si,Ge, Sn,Pb） surfaces

<正>The first-principles calculations are performed to investigate the adsorption of O₂ molecules on an Sn（111） 2×2 surface.The chemisorbed adsorption precursor states for O₂ are identified to be along the parallel and vertical channels, and the surface reconstructions of Sn（lll） induced by oxygen adsorption are studied.Based on this,the adsorption behaviours of O₂ on X（111）（X=Si,Ge,Sn,Pb） surfaces are analysed,and the most stable adsorption channels of O₂ on X（111）（X=Si,Ge,Sn,Pb） are identified.The surface reconstructions and electron distributions along the most stable adsorption channels are discussed and compared.The results show that the O₂ adsorption ability declines gradually and the amount of charge transferred decreases with the enhancement of metallicity.     

Methane adsorption on graphite（0001） films： A first-principles study

Using first-principles methods, we have systematically investigated the electronic density of states, work function, and adsorption energy of the methane molecule adsorbed on graphite(0001) films. The surface energy and the interlayer relaxation of the clean graphite(0001) as a function of the thickness of the film were also studied. The results show that the interlayer relaxation is small due to the weak interaction between the neighboring layers. The one-fold top site is found most favourable on substrate for methane with the adsorption energy of 133 meV. For the adsorption with different adsorption heights above the graphite film with four layers, the methane is found to prefer to appear at about 3.21 A above the graphite. We also noted that the adsorption energy does not dependent much on the thickness of the graphite films. The work function is enhanced slightly by adsorption of methane due to the slight charge transfer from the graphite surface to the methane molecule.     

First-principles study of the structural,mechanical and electronic properties of ZnX2O4（X=Al,Cr and Ga）

This paper performs first-principles calculations to study the structural,mechanical and electronic properties of the spinels ZnAl2O4 ,ZnGa2O4 and ZnCr2O4 ,using density functional theory with the plane-wave pseudopotential method. Our calculations are in good agreement with previous theoretical calculations and the available experimental data. The studies in this paper focus on the evolution of the mechanical properties of ZnAl2O4 ,ZnGa2O4 and ZnCr2O4 under hydrostatic pressure. The results show that the cubic phases of ZnAl2O4 ,ZnGa2O4 and ZnCr2O4 become unstable at about 50 GPa,40 GPa and 25 GPa,respectively. From analysis of the band structure of the three compounds at equilibrium volume,it obtains a direct band gap of 4.35 eV for ZnAl2O4 and 0.89 eV for ZnCr2O4 ,while ZnGa2O4 has an indirect band gap of 2.73 eV.     

Comparative study of adsorption characteristics of Cs on the GaN(0001) and GaN(000) surfaces

The adsorption characteristics of Cs on GaN(0001) and GaN(000) surfaces with a coverage from 1/4 to 1 monolayer have been investigated using the density functional theory with a plane-wave ultrasoft pseudopotential method based on first-principles calculations.The results show that the most stable position of the Cs adatom on the GaN(0001) surface is at the N-bridge site for 1/4 monolayer coverage.As the coverage of Cs atoms at the N-bridge site is increased,the adsorption energy reduces.As the Cs atoms achieve saturation,the adsorption is no longer stable when the coverage is 3/4 monolayer.The work function achieves its minimum value when the Cs adatom coverage is 2/4 monolayer,and then rises with Cs atomic coverage.The most stable position of Cs adatoms on the GaN(000) surface is at H3 site for 1/4 monolayer coverage.As the Cs atomic coverage at H3 site is increased,the adsorption energy reduces,and the adsorption is still stable when the Cs adatom coverage is 1 monolayer.The work function reduces persistently,and does not rise with the increase of Cs coverage.     

Uniaxial stress influence on lattice, band gap and optical properties of n-type ZnO： first-principles calculations

The lattice,the band gap and the optical properties of n-type ZnO under uniaxial stress are investigated by firstprinciples calculations.The results show that the lattice constants change linearly with stress.Band gaps are broadened linearly as the uniaxial compressive stress increases.The change of band gap for n-type ZnO comes mainly from the contribution of stress in the c-axis direction,and the reason for band gap of n-type ZnO changing with stress is also explained.The calculated results of optical properties reveal that the imaginary part of the dielectric function decreases with the increase of uniaxial compressive stress at low energy.However,when the energy is higher than 4.0 eV,the imaginary part of the dielectric function increases with the increase of stress and a blueshift appears.There are two peaks in the absorption spectrum in an energy range of 4.0-13.0 eV.The stress coefficient of the band gap of n-type ZnO is larger than that of pure ZnO,which supplies the theoretical reference value for the modulation of the band gap of doped ZnO.     

Comparative study of adsorption characteristics of Cs on the GaN （0001） and GaN （0001） surfaces

The adsorption characteristics of Cs on GaN （0001） and GaN （0001） surfaces with a coverage from 1/4 to 1 monolayer have been investigated using the density functional theory with a plane-wave uttrasoft pseudopotential method based on first-principles calculations. The results show that the most stable position of the Cs adatom on the GaN （0001） surface is at the N-bridge site for 1/4 monolayer coverage. As the coverage of Cs atoms at the N-bridge site is increased, the adsorption energy reduces. As the Cs atoms achieve saturation, the adsorption is no longer stable when the coverage is 3/4 monolayer. The work function achieves its minimum value when the Cs adatom coverage is 2/4 monolayer, and then rises with Cs atomic coverage. The most stable position of Cs adatoms on the GaN （000i） surface is at H3 site for 1/4 monolayer coverage. As the Cs atomic coverage at H3 site is increased, the adsorption energy reduces, and the adsorption is still stable when the Cs adatom coverage is 1 monolayer. The work function reduces persistently, and does not rise with the increase of Cs coverage.     

CCSD(T) study on the structures and chemical bonds of AnO molecules (An = Bk–Lr)

The molecular geometries and dissociation energies of AnO (An = Bk–Lr) molecules were first obtained at thecoupled-cluster single-, double-, and perturbative triple-excitations [CCSD(T)] level of theory. Four hybrid functionals,B3LYP, M06-2X, TPSSh, and PBE0, were also employed in the calculations for the sake of comparison. In comparison ofthe CCSD(T) results, B3LYP, TPSSh, and PBE0 functionals can obtain more appropriate results than M06-2X and MP2.The analyses on molecular orbitals show that the 7s, 6d, and 5f atomic orbitals of actinide (An) atoms participate in thebonding of An–O bonds. The partial covalent nature between An and O atoms is revealed by QTAIM analyses.     

Structural and magnetic properties of LiNi0.5Mn1.5O4 and LiNi0.5Mn1.5O4-δ spinels： A first-principles study

<正>Structural and magnetic properties of LiNi_0.5Mn_1.5O₄ and LiNi_0.5Mn_1.5O_4-δ are investigated using densityfunctional theory calculations.Results indicate that nonstoichiometric LiNi_0.5Mn_1.5O_4-δ and stoichiometric LiNi_0.5Mn_1.5O₄ exhibit two different structures,i.e.,the face-centred cubic（Fd-3m） and primitive,or simple,cubic （P4₃32） space groups,respectively.It is found that the magnetic ground state of LiNi_0.5Mn_1.5O₄（P4₃32 and Fd-3m） is a ferrimagnetic state in which the Ni and Mn sublattices are ferromagnetically ordered along the[110]direction whereas they are antiferromagnetic with respect to each other.We demonstrate that it is the presence of an O-vacancy in LiNi_0.5Mn_1.5O_4-δ with the Fd-3m space group that results in its superior electronic conductivity compared with LiNi_0.5Mn_1.5O₄ with the P4₃32 space group.