Density functional theory study of NO2-sensing mechanisms of pure and Ti-dopedWO3 （002） surfaces

Density functional theory (DFT) calculations are employed to explore the NO₂-sensing mechanisms of pure and Ti-doped WO₃ (002) surfaces. When Ti is doped into the WO₃ surface, two substitution models are considered: substitution of Ti for W_6c and substitution of Ti for W_5c. The results reveal that substitution of Ti for 5-fold W forms a stable doping structure, and doping induces some new electronic states in the band gap, which may lead to changes in the surface properties. Four top adsorption models of NO₂ on pure and Ti-doped WO₃ (002) surfaces are investigated: adsorptions on 5-fold W (Ti), on 6-fold W, on bridging oxygen, and on plane oxygen. The most stable and likely NO₂ adsorption structures are both N-end oriented to the surface bridge oxygen O_1c site. By comparing the adsorption energy and the electronic population, it is found that Ti doping can enhance the adsorption of NO₂, which theoretically proves the experimental observation that Ti doping can greatly increase the WO₃ gas sensor sensitivity to NO₂ gas.     

A density functional theory study on the adsorption of CO and O2 on Cu-terminated Cu2O （111） surface

The adsorptions of CO and 02 molecules individually on the stoichiometric Cu-terminatcd Cu20 （111） surface are investigated by first-principles calculations on the basis of the density functional theory. The calculated results indicate that the CO molecule preferably coordinates to the Cu2 site through its C atom with an adsorption energy of-1.69 eV, whereas the 02 molecule is most stably adsorbed in a tilt type with one O atom coordinating to the Cu2 site and the other O atom coordinating to the Cul site, and has an adsorption energy of -1.97 eV. From the analysis of density of states, it is observed that Cu 3d transfers electrons to 2π orbital of the CO molecule and the highest occupied 5σ orbital of the CO molecule transfers electrons to the substrate. The sharp band of Cu 4s is delocalized when compared to that before the CO molecule adsorption, and overlaps substantially with bands of the adsorbed CO molecule. There is a broadening of the 2π orbital of the 02 molecule because of its overlapping with the Cu 3d orbital, indicating that strong 3d-2π interactions are involved in the chemisorption of the 02 molecule on the surface.     

Comparative study of adsorption characteristics of Cs on the GaN （0001） and GaN （0001） surfaces

The adsorption characteristics of Cs on GaN （0001） and GaN （0001） surfaces with a coverage from 1/4 to 1 monolayer have been investigated using the density functional theory with a plane-wave uttrasoft pseudopotential method based on first-principles calculations. The results show that the most stable position of the Cs adatom on the GaN （0001） surface is at the N-bridge site for 1/4 monolayer coverage. As the coverage of Cs atoms at the N-bridge site is increased, the adsorption energy reduces. As the Cs atoms achieve saturation, the adsorption is no longer stable when the coverage is 3/4 monolayer. The work function achieves its minimum value when the Cs adatom coverage is 2/4 monolayer, and then rises with Cs atomic coverage. The most stable position of Cs adatoms on the GaN （000i） surface is at H3 site for 1/4 monolayer coverage. As the Cs atomic coverage at H3 site is increased, the adsorption energy reduces, and the adsorption is still stable when the Cs adatom coverage is 1 monolayer. The work function reduces persistently, and does not rise with the increase of Cs coverage.     

Density functional study of uranyl （VI） amidoxime complexes

Uranyl (VI) amidoxime complexes are investigated using relativistic density functional theory. The equilibrium structures, bond orders, and Mulliken populations of the complexes have been systematically investigated under a generalized gradient approximation (GGA). Comparison of (acet) uranyl amidoxime complexes ([UO₂(AO)_n]^2-n, 1 ≤ n ≤ 4) with available experimental data shows an excellent agreement. In addition, the U-O(1), U-O(3), C(1)-N(2), and C(3)-N(4) bond lengths of [UO₂(CH₃AO)₄]^2- are longer than experimental data by about 0.088, 0.05, 0.1, and 0.056 Å. The angles of N(3)-O(3)-U, O(2)-N(1)-C(1), N(3)-C(3)-N(4), N(4)-C(3)-C(4), and C(4)-C(3)-N(3) are different from each other, which are due to existing interaction between oxygen in uranyl and hydrogen in amino group. This interaction is found to be intra-molecular hydrogen bond. Studies on the bond orders, Mulliken charges, and Mulliken populations demonstrate that uranyl oxo group functions as hydrogen-bond acceptors and H atoms in ligands act as hydrogen-bond donors forming hydrogen bands within the complex.     

Density functional theory study on the structure and properties of Si3N4 clusters

The hybrid density functional theory B3LYP with basis sets 6-31G＊ has been used to study on the equilibrium geometries and electronic structures of possible isomers of Si3N4 clusters. 24 possible isomers are obtained. The most stable isomer of Si3N4 is a 3D structure with 7 Si-N bonds and 2 N-N bonds that could beformed by 3 quadrangles. The bond properties of the most stable isomer was analyzed by using natural bond orbital method （NBO）, the results suggest that the charges on Si and N atoms in Si-N bonds are quite large, so theinteraction of N-Si atoms in Si3N4 cluster is of strongly electric interaction. The primary IR and Raman vibrational frequency located at 1033.40 cm^-1, 473.63 cm^-1 respectively. The polarizabilities and hyperpolarizabilities of the most stable isomer are also analyzed.     

H2S、HCN、PH3在FeO（100）表面吸附的密度泛函理论研究

基于密度泛函理论研究了H2S、HCN、PH3 在FeO(100)表面的吸附行为,其吸附位点主要考虑四个：Fe-top(铁顶位)、O-top(氧顶位)、Hollow(空位)、Bridge(桥位)。结果表明H2S吸附在O-top吸附位点的吸附能最小,为-1.02ev,即在该位点的吸附体系最稳定。当HCN吸附在FeO(100)表面时,各吸附位点的稳定顺序为Hollow>Fe-top>Bridge>O-top。PH3 的最稳定的吸附位点与H2S的一致,为O-top吸附位点,其吸附能为-1.11ev。当H2S吸附在O-top吸附位点时,H2S与FeO（100）表面的电荷转移量最多,说明该吸附构型最稳定,而HCN吸附在FeO(100)表面,在Hollow吸附位点的电荷转移量最多,也即该吸附位点属于最稳定吸附位点。PH3与FeO（100）表面之间的电荷转移量最多的吸附位点与H2S的相同。当H2S和PH3吸附在O-top吸附位点时,吸附后的态密度曲线整体向低能级移动,峰值降低,其吸附结构变得更加稳定。而HCN吸附在Hollow位点时,吸附后的HCN态密度曲线向能量更低的区域移动,吸附体系变得更稳定。     

Density functional theory study of Mg2Nin （n = 1-8） clustersDensity functional theory study of Mg2Nin （n = 1-8） clustersDensity functional theory study of Mg2Nin （n = 1-8） clustersDensity functional theory study of Mg2Nin （n = 1-8） clustersDensity functional theory study of Mg2Nin （n = 1-8） clusters

The density functional theory B3PW91 with LANL2DZ basis sets has been used to study the possible geometries of Mg2Nin （n - 1-8） clusters. For the lowest energy structures of the clusters, stabilities, electronic properties, and natural bond orbital （NBO） are calculated and discussed. The results show that the doped Mg atoms reduce the stabilities of pure Ni clusters. The Mg2Ni2, Mg2Ni4, and Mg2Ni6 clusters are more stable than neighboring clusters. The system appears magic number characteristics. In addition, the hybridization phenomenon occurs, owing to the interaction of Mg and Ni. The result of charge transfer is that Ni atom is negative and the Mg atom is positive. We also conclude that the 3p and 4d orbitals of the Ni atom have an effect on the stabilities of the clusters.     

A Density Functional Study of Atomic Carbon Adsorption on δ-Pu（111） Surface

Adsorption of atomic carbon on 6-Pu（111） surface is investigated systematically using density functional theory with RPBE functional. The adsorption energies, adsorption structures, Mulliken population, work functions, layer and projected density of states are calculated in wide ranges of coverage, which have never been studied before as far as we know. It is found that the hcp-hollow sites is the energetically favorable site for all the coverage range considered. The repulsive interaction is identified, and the adsorption energy decreases with the coverage, while work function increases linearly with the coverage. It is found that the C-Pu interaction is very strong due to the hybridization between the C 2p states and the Pu 5 f , Pu 6p,Pu 6d states of topmost layer Plutonium atoms.     

Structures and electronic properties of SimN8-m（0 〈 m 〈 8） clusters： a density functional theory study

The geometries, electronic structures and related properties of SimN8-m（0 〈 m 〈 8） clusters are studied using density functional theory （DFT） with hybrid functional B3LYP. The calculated results reveal several trends. For any stoichiometric clusters, the lowest energy isomers with an alteration of N and Si atoms are favourable in energy if the numbers of Si and N atoms are large enough to form ... Si N-Si-N... alternative chains. The bond lengths of single Si-N bonds are very close to the corresponding values of the bulk and other SiN clusters. The geometries for N-rich and Si4N4 clusters are planar structures, but three-dimensional structures are favourable in energy for Si-rich clusters. With the increase of m, the isotropic polarizability and average polarizability increase, the total binding energies generally decrease, the HOMO-LUMO gap and vertical ionization potential oscillate with increasing number of valence electrons, and their values with even valence electrons are larger than those with odd valence electrons. The atomic charges, IR and Raman properties are also reported.     

Structures,stabilities, and electronic properties of F-doped Sin （n=1～12） clusters：Density functional theory investigation

The geometries, stabilities, and electronic properties of FSin （n=1～12） clusters are systematically investigated by using first-principles calculations based on the hybrid density-functional theory at the B3LYP/6-311G level. The geometries are found to undergo a structural change from two-dimensional to three-dimensional structure when the cluster size n equals 3. On the basis of the obtained lowest-energy geometries, the size dependencies of cluster properties, such as averaged binding energy, fragmentation energy, second-order energy difference, HOMO–LUMO （highest occupied molecular orbital–lowest unoccupied molecular orbital） gap and chemical hardness, are discussed. In addition, natural population analysis indicates that the F atom in the most stable FSin cluster is recorded as being negative and the charges always transfer from Si atoms to the F atom in the FSin clusters.     

H2O在SrTiO3-(001)TiO2表面上吸附和解离的密度泛函理论研究

利用密度泛函理论研究了0.25单层(ML),0.5ML,0.75ML和1ML吸附率下H2O在SrTiO3-(001)TiO2表面上的吸附行为.比较了不同吸附率下分子吸附和解离吸附的稳定性,利用微动弹性带(nudged elastic band)方法计算了H2O的解离势垒.结果表明:在低吸附率(0.25ML和0.5ML)时,H2O表现为解离吸附;在0.75ML吸附率下,分子吸附和解离吸附同时存在;而在全吸附(吸附率为1ML)时,分子吸附更稳定.基于对H2O分子与表面之间以及H2O分子之间的电荷转移和相互作用的分析,讨论了吸附率对H2O吸附和解离的影响.     

Density functional theory study of MgnNi2 （n=1-6） clusters

The geometries of Mg n Ni 2(n = 1-6) clusters are studied by using the hybrid density functional theory(B3LYP) with LANL2DZ basis sets.For the ground-state structures of Mg n Ni 2 clusters,the stabilities and the electronic properties are investigated.The results show that the groundstate structures and symmetries of Mg clusters change greatly due to the Ni atoms.The average binding energies have a growing tendency while the energy gaps have a declining tendency.In addition,the ionization energies exhibit an odd-even oscillation feature.We also conclude that n = 3,5 are the magic numbers of the Mg n Ni 2 clusters.The Mg 3 Ni 2 and Mg 5 Ni 2 clusters are more stable than neighbouring clusters,and the Mg 4 Ni 2 cluster exhibits a higher chemical activity.     

A density functional theory study of the electronic structures and magnetic properties of Fe（1-x）Cox alloy nanowires encapsulated in （10,0） carbon nanotubes

Under the generalized gradient approximation, the electronic structures and magnetic properties of Fe_(1-x)Co_x alloy nanowires encapsulated inside zigzag (10,0) carbon nanotubes (CNTs) are investigated systematically using firstprinciple density functional theory calculations. For the fully relaxed Fe_(1-x)Co_x/CNT structures, all the C atoms relax outwards, and thus the diameters of the CNTs are slightly increased. Formation energy analysis shows that the combining processes of all Fe_(1-x)Co_x/CNT systems are exothermic, and therefore the Fe_(1-x)Co_xalloy nanowires can be encapsulated into semiconducting zigzag (10,0) CNTs and form stable hybrid structures. The charges are transferred from the Fe_(1-x)Co_xnanowires to the more electronegative CNTs, and the Fe-C/Co-C bonds formed have polar covalent bond characteristics. Both the spin polarization and total magnetic moment of the Fe_(1-x)Co_x/CNT system are smaller than those of the corresponding freestanding Fe_(1-x)Co_xnanowire, and the magnetic moment of the Fe_(1-x)Co_x/CNT system decreases monotonously with increasing Co concentration, but the Fe_(1-x)Co_x/CNT systems still have a large magnetic moment, implying that they can be utilized in high-density magnetic recording devices.     

Density Functional Calculation of the 0.5ML-Terminated Allyl Mercaptan/Si（100）-（2 × 1） Surface

The structural and electronic properties of the 0.5 ML-terminated allyl mercaptan （ALM）/Si（IO0）-（2 x 1） surface are studied using the density functional method. The calculated absorption energy of the ALM molecule on the 0.5 ML-terminated ALM/Si（IO0）-（2 x 1） surface is 3.36eV, implying that adsorption is strongly favorable. The electronic structure calculations show that the ALM/Si（IO0）-（2 x 1）, the clean Si（100）-（2 x 1）, and the fully-terminated H/Si（IO0）-（2 ~ 1） surfaces have the nature of an indirect band gap semiconductor. The highest occupied molecular orbital is dominated by the ALM, confirming the mechanism proposed by Hossain for its chain reaction.     

H2O在SrTiO3-(001)TiO2表面上吸附和解离的密度泛函理论研究

利用密度泛函理论研究了0.25单层（ML）,0.5ML,0.75ML和1ML吸附率下H₂O在SrTiO₃-（001）TiO₂表面上的吸附行为.比较了不同吸附率下分子吸附和解离吸附的稳定性,利用微动弹性带（nudged elastic band）方法计算了H₂O的解离势垒.结果表明：在低吸附率（0.25ML和0.5ML）时,H₂O表现为解离吸附;在0.75ML吸附率下,分子吸附和解离吸附同时存在;而在全吸附（吸附率为1ML）时,分子吸附更稳定.基于对H₂O分子与表面之间以及H₂O分子之间的电荷转移和相互作用的分析,讨论了吸附率对H₂O吸附和解离的影响. 关键词： 2O')" href="#">H₂O 吸附 3-（001）TiO₂表面')" href="#">SrTiO₃-（001）TiO₂表面 密度泛函理论     

First Principles Study of Adsorption and Reaction of CO on SrTiO3 （100） Surface： the Role of Surface Oxygen Vacancies

The adsorption and reaction of CO on SrTiO3 （100） surface with and without surface oxygen vacancy are investigated by the first-principles calculation based on the density functional theory. The calculated results reveal that the oxygen vacancy site prefers to the activation of the C-O bond. The adsorption energies increase to 1.0855 and 0.3245eV for defect-CO and defect-OC orientations, respectively. Particularly the C-O bond is elongated by about 0.1285 ？ in the defect-OC orientation compared with that in the Ti-OC one without surface oxygen vacancies. There is predominantly a chemisorption mechanism between the CO molecule and the surface in the defect-CO orientation.     

Adsorption and Reaction of CO on （100） Surface of SrTiO3 by Density Function Theory Calculation

Adsorption and reaction of CO on two possible terminations of SrTiO3 （100） surface are investigated by the first-principles calculation of plane wave ultrasoft pseudopotentiai based on the density function theory. The adsorption energy, Mulliken population analysis, density of states （DOS） and electronic density difference of CO on SrTiO3 （100） surface, which have never been investigated before as far as we know are performed. The calculated results reveal that the Ti-CO orientation is the most stable configuration and the adsorption energy （0.449eV） is quite small. CO molecules adsorb weakly on the SrTiO3 （100） surface, there is predominantly electrostatic attraction between CO and the surface rather than a chemical bonding mechanism.     

Atomic Layer Deposition of Al2O3 on H-Passivated GeSi： Initial Surface Reaction Pathways with H/GeSi（100）-2 × 1

The reaction mechanisms of Al（CH3 ）3 （TMA） adsorption on H-passivated GeSi（100）-2 × 1 surface are investigated with density functional theory. The Si-Ge and Ge-Ge one-dimer cluster models are employed to represent the GeSi（100）-2 × 1 surface with different Ge compositions. For a Si-Ge dimer of a H-passivated SiGe surface, TMA adsorption on both Si-H^＊ and Ge-H^＊ sites is considered. The activation barrier of TMA with the Si-H^＊ site （1.2eV） is higher than that of TMA with the Ge-H^＊ site （0.91 eV）, which indicates that the reaction proceeds more slowly on the Si-H^＊ site than on the Ge-H^＊ site. In addition, adsorption of TMA is more energetically favorable on the Ge-Ge dimer than on the Si-Ge dimer of H-passivated SiGe.     

First-principles study on anatase TiO2（101） surface adsorption of NO

In this paper, the stable structure and the electronic and optical properties of nitric oxide （NO） adsorption on the anatase TiO2 （101） surface are studied using the plane-wave ultrasoft pseudopotential method, which is based on the density functional theory. NO adsorption on the surface is weak when the outermost layer terminates on twofold coordinated oxygen atoms, but it is remarkably enhanced on the surface containing O vacancy defects. The higher the concentration of oxygen vacancy defects, the stronger the adsorption is. The adsorption energies are 3.4528 eV （N end adsorption）, 2.6770 eV （O end adsorption）, and 4.1437 eV （horizontal adsorption）. The adsorption process is exothermic, resulting in a more stable adsorption structure. Furthermore, O vacancy defects on the TiO2 （101） surface significantly contribute to the absorption of visible light in a relatively low-energy region. A new absorption peak in the low-energy region, corresponding to an energy of 0.9 eV, is observed. However, the TiO2 （101） surface structure exhibits weak absorption in the low-energy region of visible light after NO adsorption.