Determination of trace elements in residual oil by high-resolution inductively coupled plasma mass spectrometry

An analytical method using high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) for rapid simultaneous determination of 20 elements, including Na, Mg, Al, Ca, Ti, V, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Mo, Cd, Sn, Sb, Ba, and Pb elements, in residual oil was described. The sample was dissolved in HNO₃ by microwave digestion, and then the above 20 elements in the solution were analyzed directly by HR-ICP-MS. Most of the spectral interferences could be avoided by measuring in the high-resolution mode. The matrix effect caused by the sample-digesting solution and corrected by Sc, Rh, and Bi as the internal standard elements was studied in detail. The optimum condition of the determination was also tested and discussed. The result showed that the detection limits of the method were in the range of 0.014 to 11.6 μg L⁻¹; the relative standard deviation was less than 3.8% and recoveries in the samples were in the range of 88.4% to 108.0%. This method can be used to determine the trace elements in residual oil with the features of accurate, rapid, and convenient determination.     

Determination of trace elements in granites by inductively coupled plasma mass spectrometry

Proposed is a simple and reliable method for the dissolution of granite and the determination of 38 elements by inductively coupled plasma mass spectrometry. One hundred milligrams of sample are digested with 1 ml of HF and 0.5 ml of HNO(3) in screw top PTFE-lined stainless steel bombs at 190 degrees C for 12 h. Insoluble residues are dissolved using 8 ml of 40% HNO(3) (v/v) heated to 110 degrees C for 3 h. Six granite standard reference materials (GSR-1, JG-2, G-2, NIM-G, SG-3, SG-1a) were studied. Analytical calibration was accomplished using aqueous standard solutions. Rhodium was used as an internal standard to correct for matrix effects and instrument drift. We report data for: Li, Be, Sc, V, Cr, Co, Ni, Cu, Zn, Ga, Rb, Sr, Y, Zr, Nb, Mo, Cs, Ba, Hf, Ta, W, Pb, Th, U and 14 of the rare earth elements. The recoveries for most of these elements in granite ranged from 90 to 110%.     

Determination of trace elements in a human serum reference material by inductively coupled plasma mass spectrometry

A method was developed for the determination of Fe, Co, Cu, Zn, Rb, Mo and Cs in human serum by ICP-MS. Sample preparation was kept as limited as possible: Serum samples were diluted with nitric acid and indium was added as internal standard. The results for Fe, Co, Cu, and Zn were corrected for interferences from polyatomic ions using a suitable blank solution. No interferences occur for the considered isotopes of Rb, Mo, and Cs. A second-generation human serum reference material was analyzed, in order to test the accuracy and precision of the analytical procedure. The results obtained are in good agreement with the certified values.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, AustriaResearch Director of the National Fund for Scientific Research (Belgium)     

电感耦合等离子体质谱法测定固体生物质燃料中重金属

为开展重金属监测及环境保护,本文建立了电感耦合等离子体质谱法测定固体生物质燃料中重金属方法。对样品全消解酸溶法进行了实验研究,确定了微波消解酸体系和微波消解程序。采用Ge和In作为内标元素消除仪器干扰,方法线性关系良好,线性系数>0.999,检出限为0.001～0.089mg/kg。采用标准物质对方法准确性和稳定性进行验证,各元素测定值均在标准证书值范围内,相对标准偏差在0.36%～3.96%,Hg的加标平均回收率为104.7%。通过3家实验室协同实验验证了方法准确性,并给出了方法精密度。     

Determination of rare-earth elements in uranium-bearing materials by inductively coupled plasma mass spectrometry

A novel and simple analytical procedure has been developed for the trace-level determination of lanthanides (rare-earth elements) in uranium-bearing materials by inductively coupled plasma sector-field mass spectrometry (ICP-SFMS). The method involves a selective extraction chromatographic separation of lanthanides using TRU™ resin followed by ICP-SFMS analysis. The limits of detection of the method proposed is in the low pg g⁻¹ range, which are approximately two orders of magnitude better than that of without chemical separation. The method was validated by the measurement of reference material and applied for the analysis of uranium ore concentrates (yellow cakes) for nuclear forensic purposes, as a potential application of the methodology.     

电感耦合等离子体质谱法测定高纯金中铝、砷、铋、铬、铁、铅、锑、硒、碲、铱痕量元素

建立了微波消解-内标法-标准加入-ICP-MS法测定高纯黄金中铝、砷、铋、铬、铁、铅、锑、硒、碲、铱等痕量元素的分析方法.从试样溶解方式、内标元素及同位素的选择、仪器检测模式的优化及降低基体抑制效应等方面进行优化.实验加标回收率为99.5％ ～110％,相对标准偏差(RSD)为0.050％ ～6.5％.实验的准确度和精...     

Determination of trace elements in plant materials by inductively coupled plasma optical emission spectrometry

The use of inductively coupled plasmas as spectrometric emission sources for the determination of Fe, Mn, Cu, Al, B and Zn in orchard leaves is investigated. The plasma is shown to be sufficiently sensitive for the direct determination of all of the above elements in solutions of the plant materials after a dry ashing procedure. Comparative values for the trace element concentrations by other analytical methods are given.     

Determination of trace elements in steel by laser ablation inductively coupled plasma mass spectrometry.

A rapid quantitative analysis of the trace elements in steel by laser ablation inductively coupled plasma mass spectrometry is described. The conditions for laser ablation and normalization methods to improve the analytical precision are given. The optimum conditions for laser ablation were achieved when the ion yield was a maximum at the focus position in the fixed Q pulse mode, and above the focus position in the Q-switched pulse mode. It was found that the fixed Q pulse mode was most suitable for the determination of trace metal elements in steel, and that the Q-switched pulse mode was most suitable for both non-metallic elements and elements with a high boiling-point. In order to improve the analytical precision for those elements with a strong background intensity, normalization methods with both the matrix ion, 57Fe+, and 38Ar+ are proposed.     

Determination of trace elements in geological samples by laser ablation inductively coupled plasma mass spectrometry

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was applied for the sensitive multi-element analysis of traces and ultra-traces in geological samples. In order to prepare homogeneous targets the powdered geological samples were melted together with a lithium-borate mixture (90% Li₂B₄O₇, 10% LiBO₂) in a muffle furnace at 1050 °C. The quantification of the analysis results was carried out using the BCR-2G and BM standard reference material (SRM). The experimentally determined relative sensitivity coefficients (RSC) for both SRMs vary between 0.2 and 3 for most of the elements, whereas the relative standard deviation (RSD) of the determination (N = 3) of the concentration was 5–20%. The analysis results of LA-ICP-MS for various geological samples are in agreement with those of other methods. Received 31 March 1999 / Revised: 26 May 1999 / Accepted: 31 May 1999     

Determination of trace elements in geological samples by laser ablation inductively coupled plasma mass spectrometry

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) was applied for the sensitive multi-element analysis of traces and ultra-traces in geological samples. In order to prepare homogeneous targets the powdered geological samples were melted together with a lithium-borate mixture (90% Li₂B₄O₇, 10% LiBO₂) in a muffle furnace at 1050?°C. The quantification of the analysis results was carried out using the BCR-2G and BM standard reference material (SRM). The experimentally determined relative sensitivity coefficients (RSC) for both SRMs vary between 0.2 and 3 for most of the elements, whereas the relative standard deviation (RSD) of the determination (N = 3) of the concentration was 5–20%. The analysis results of LA-ICP-MS for various geological samples are in agreement with those of other methods.     

Determination of cosmochemically volatile trace elements in chondritic meteorites by inductively coupled plasma mass spectrometry

We have developed a method for the quantification of 14 cosmochemically moderately volatile to highly volatile trace elements (Cu, Zn, Ga, Se, Rb, Ag, Cd, In, Sn, Sb, Te, Cs, Tl, and Bi) in chondritic meteorites by ICPMS. The method utilizes internal standardization via addition of Be, Rh, Re, and U and multiple single point matrix-matched external calibrations with Allende standard reference meteorite to provide drift corrected calibration within an ICPMS procedure. We have demonstrated our method's precision and accuracy by performing replicate dissolutions and analyses of 0.05-0.10 g samples of a homogenized sample of the CM2 Murchison meteorite and compared our results to literature values for this meteorite. Our procedure allows for a rapid and accurate determination of the cosmochemically important VTEs in chondritic meteorites providing the means for an even more comprehensive elemental analysis of a single sample of chondritic material.     

Determination of 24 elements in four algae reference materials by neutron activation analysis and inductively coupled plasma mass spectrometry

Four algae reference materials, IAEA-391, 392, 393 and IAEA-140, prepared by the International Atomic Energy Agency for intercomparison under different preparation conditions were analyzed for 24 elements. Conventional neutron activation analysis (NAA) was used to determine Al, Ca, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Mo, Na, Sb, V and Zn and epithermal NAA using BN and Cd as shielding material for I, Br, As, Ni, Mo and Cd. Inductively coupled plasma mass spectrometry (ICP-MS) as a complementary and comparative method was applied to determine Pb, Sn, Ni, Sr, Rb, As, Co, Cr, Cu, Mn, V, Mo and Zn. Two analytical quality control standard reference materials IAEA-V-10 (hay powder) and IAEA-331 (spinach) were analyzed simultaneously with real samples. The results agree quite well with each other and with the certified values.     

Determination of lanthanoids and some heavy and toxic elements in plant certified reference materials by inductively coupled plasma mass spectrometry

The possibilities of inductively coupled plasma mass spectrometry (ICP-MS) (choice of isotopes, instrument optimisation) for the determination of lanthanoids, and some heavy and toxic elements in plants are discussed. A variety of plant certified materials (NIST-SRM-1515, NIST-SRM-1547, NIST-SRM-1573a, NIST-SRM-1575, GBW 08504, GBW 08505) are analysed and the elements: As, Be, Bi, Cd, Ce, Co, Cr, Cu, Dy, Er, Eu, Ga, Gd, Ho, La, Lu, Nd, Ni, Pb, Pr, Rb, Sm, Sr, Th, Te, Th, Tl, U, V, Y, Yb and Zn are determined. The comparison with certified values and literature values indicated that ICP-MS is a very promising method for the instrumental determination of Be, lanthanoids, Th and U and other elements at ng/g level in plants.     

Determination of trace elements in marine plankton by inductively coupled plasma mass spectrometry (ICP-MS)

A method has been developed for the determination of 23 elements in marine plankton in which inductively coupled plasma (ICP) source mass spectrometry (MS) was used to quantify the elements in the solution after digestion in a mixture of hydrofluoric and nitric acids in sealed PTFE vessels in a microwave field. The procedure was validated by the analysis of a standard reference soil (SRM 2709 San Joaquin Soil) and a standard reference fresh water plankton (CRM 414). The method was applied to the analysis of several marine plankton samples grown under controlled conditions including several whose growth media had been enriched with selenium. Matrix induced signal suppressions and instrumental drift were corrected by internal standardization. The suitabilities of germanium, indium, rhodium, scandium and yttrium as internal standard elements were evaluated. Neither scandium nor yttrium could be used due to the presence of these elements in the samples, germanium was used for the determination of As, Co, Cu, Fe, Ni, Se, Si and Zn, indium was used for Al, Ba, Ca, Eu, Sr, and Tl, and rhodium was used for Cd, Cr, Hg, Mg, Pb, Sb, Sn, and V. For Al, Ca, Cr, Cu, Fe, Mg, Mn, Ni, Si, Sr, V, and Zn internal standardization did not completely compensate for the suppressive effect of the heavier elements and the solutions were diluted. However, for As, Ba, Cd, Co, Eu, Hg, Pb, Sb, Se, Sn and Tl, it was possible to obtain accurate results despite the 35–¶40% suppression in the signals. Isobaric overlap was only a problem in the cases of ⁴²Ca and ⁷⁸Se; ⁴⁴Ca and ⁷⁷Se, respectively, were used. Memory effects were only observed with Hg for which a nitric acid-sodium chloride solution was the most effective wash-out solution. The marine plankton samples were able to tolerate a higher concentration of Hg as the selenium concentration increased.     

Determination of trace elements in marine plankton by inductively coupled plasma mass spectrometry (ICP-MS)

A method has been developed for the determination of 23 elements in marine plankton in which inductively coupled plasma (ICP) source mass spectrometry (MS) was used to quantify the elements in the solution after digestion in a mixture of hydrofluoric and nitric acids in sealed PTFE vessels in a microwave field. The procedure was validated by the analysis of a standard reference soil (SRM 2709 San Joaquin Soil) and a standard reference fresh water plankton (CRM 414). The method was applied to the analysis of several marine plankton samples grown under controlled conditions including several whose growth media had been enriched with selenium. Matrix induced signal suppressions and instrumental drift were corrected by internal standardization. The suitabilities of germanium, indium, rhodium, scandium and yttrium as internal standard elements were evaluated. Neither scandium nor yttrium could be used due to the presence of these elements in the samples, germanium was used for the determination of As, Co, Cu, Fe, Ni, Se, Si and Zn, indium was used for Al, Ba, Ca, Eu, Sr, and Tl, and rhodium was used for Cd, Cr, Hg, Mg, Pb, Sb, Sn, and V. For Al, Ca, Cr, Cu, Fe, Mg, Mn, Ni, Si, Sr, V, and Zn internal standardization did not completely compensate for the suppressive effect of the heavier elements and the solutions were diluted. However, for As, Ba, Cd, Co, Eu, Hg, Pb, Sb, Se, Sn and T1, it was possible to obtain accurate results despite the 35-40% suppression in the signals. Isobaric overlap was only a problem in the cases of 42Ca and 78Se; 44Ca and 77Se, respectively, were used. Memory effects were only observed with Hg for which a nitric acid-sodium chloride solution was the most effective wash-out solution. The marine plankton samples were able to tolerate a higher concentration of Hg as the selenium concentration increased.     

微波消解-电感耦合等离子体质谱(ICP-MS)法测定拟黑多刺蚁中11种微量元素

为准确定量拟黑多刺蚁体内的微量元素,采用微波消解法,以HNO_(3)-H_(2)O_(2)混合酸为消解体系对样品进行前处理,选择合适的同位素,以^(103)Rh为内标测定^(52)Cr、^(55)Mn、^(60)Ni、^(63)Cu、^(66)Zn、^(75)As、^(78)Se、^(88)Sr和^(114)Cd,以^(185)Re为内标测定^(202)Hg和^(208)Pb,建立了电感耦合等离子体质谱法测定拟黑多刺蚁中11种微量元素的方法。实验发现,以HNO_(3)-H_(2)O_(2)为消解体系,样品消解完全;采用KED模式消除质谱干扰,以内标法校正基体效应;通过绘制校准曲线及测定流程空白,各元素校准曲线的相关系数均大于0.999,方法检出限为0.0005~0.011 mg/kg,方法定量限为0.0016~0.033 mg/kg。对拟黑多刺蚁实际样品进行测定,各元素的相对标准偏差(RSD,n=9)在1.2%~5.5%,加标回收率为91.2%~107%;经过实验室间比对实验,相对偏差为-3.15%~2.74%;测定六个不同产地的拟黑多刺蚁样品,结果显示不同产地样品除Cd外,其他10种微量元素的含量均存在较大差异。测定结果稳定可靠,能满足拟黑多刺蚁中11种微量金属元素含量的分析检测要求。     

Determination of trace sulfur in biodiesel and diesel standard reference materials by isotope dilution sector field inductively coupled plasma mass spectrometry

A method is described for quantification of sulfur at low concentrations on the order of mg kg⁻¹ in biodiesel and diesel fuels using isotope dilution and sector field inductively coupled plasma mass spectrometry (ID-SF-ICP-MS). Closed vessel microwave-assisted digestion was employed using a diluted nitric acid and hydrogen peroxide decomposition medium to reduce sample dilution volumes. Medium resolution mode was employed to eliminate isobaric interferences at ³²S and ³⁴S related to polyatomic phosphorus and oxygen species, and sulfur hydride species. The method outlined yielded respective limits of detection (LOD) and limits of quantification (LOQ) of 0.7 mg kg⁻¹ S and 2.5 mg kg⁻¹ S (in the sample). The LOD was constrained by instrument background counts at ³²S but was sufficient to facilitate value assignment of total S mass fraction in NIST SRM 2723b Sulfur in Diesel Fuel Oil at 9.06 ± 0.13 mg kg⁻¹. No statistically significant difference at a 95% confidence level was observed between the measured and certified values for certified reference materials NIST SRM 2773 B100 Biodiesel (Animal-Based), CENAM DRM 272b and NIST SRM 2723a Sulfur in Diesel Fuel Oil, validating method accuracy.     

Determination of copper, molybdenum and selenium in biological reference materials by inductively coupled plasma mass spectrometry

Summary In a contribution to the elemental characterization of 10 new reference materials, Bovine Muscle Powder (136), Corn Starch (162), Hard Red Spring Wheat Flour (165), Soft Winter Wheat Flour (166), Whole Milk Powder (183), Wheat Gluten (184), Corn Bran (186), Durum Wheat Flour (187), Whole Egg Powder (188) and Microcrystalline Cellulose (189), the total concentrations of Cu, Mo and Se were determined by the application of an analytical method based on isotope dilution inductively coupled plasma mass spectrometry. Cu and Mo contents were quantified by measurement of ⁶⁵Cu/⁶³Cu and ⁹⁷Mo/¹⁰⁰Mo isotopic ratios following spiking with ⁶⁵Cu and ⁹⁷Mo and digestion with nitric acid. Selenium was separated as hydrogen selenide from the matrix using sodium borohydride after spiking with ⁸²Se and acid digestion-dry ashing and quantified by measurement of the ⁸²Se/⁷⁸Se isotopic ratio. Comparison of these results with those from a variety of other methods and assessment of the procedures using certified reference materials indicated that the determinations of Cu, Mo and Se were performed without analytical bias.