顶空气相色谱-质谱联用法测定胶粘剂中的残余单体

建立了一种测定胶黏剂中6种丙烯酸酯和甲基丙烯酸酯类残余单体的分析方法。样品经100 ℃、30 min顶空加热后,通过DB-WAX色谱柱(30 m×0.25 mm×0.25 μm)分离和质谱选择离子模式检测,内标法定量。结果表明,6种残余单体能达到良好的分离,检出限(信噪比为3)为0.069～0.096 mg/kg,定量限(信噪比为10)为0.23～0.32 mg/kg,平均回收率为96.0%～104.6%,相对标准偏差(RSD)小于7.2%。该方法操作简便、准确、重复性好、灵敏度高,可用于胶黏剂中丙烯酸酯和甲基丙烯酸酯类残余单体的快速测定。     

高效液相色谱-串联质谱法同时测定烟草中5种Amadori化合物

建立了高效液相色谱-三重四极杆质谱（HPLC-QqQ MS）联用定量分析烟草中5种Amadori前香物质的方法。样品经含5%（v/v）甲醇的水提取后,采用Waters XBridge^TM Amide色谱柱（250 mm×4.6 mm,3.5 μm）、以甲醇-水为流动相进行分离,采用多反应监测（MRM）模式测定烟草样品中5种Amadori化合物的含量。结果表明,5种Amadori化合物的峰面积与质量浓度的线性关系良好,相关系数r为0.9895~0.9989;定量限（S/N=10）在10.18~44.58 μg/L,检出限（S/N=3）在3.51~14.86 μg/L;平均加标回收率为92.6%~123.6%,相对标准偏差（RSD）小于9.4%。本方法操作简便、灵敏度高、分析速度快,可以用于烟叶及卷烟中5种主要Amadori类物质的含量测定。     

The crystal structure of 1-(4-chlorophenyl)-3-(4-methylbenzoyl)thiourea

1-(4-Chlorophenyl)-3-(4-methylbenzoyl)thiourea was synthesized and characterized by IR,¹H and ¹³C NMR, mass spectroscopy and the elemental analysis. The crystal structure was confirmed from single crystal X-ray diffraction data. It crystallizes in the monoclinic space group P2₁/c with unit cell dimensions a=12.038(3), b=6.330(6), c=18.912(5) Å and β=100.32(3)°. There is a strong intramolecular hydrogen bond of the type N?H...O, with distance N1...O1=2.659(3) Å. The structure is composed of dimers related by inversion centers. The dimers are formed by intermolecular interactions of the type N?H...S with N...S separation of 3.440(2) Å. The mass fragmentation pattern has also been discussed.     

多重吸附同步净化-气相色谱-质谱法测定干性样品中丁烯氟虫腈的残留量

建立了干性样品中丁烯氟虫腈残留量的多重吸附同步净化(MASP)-气相色谱-质谱检测方法。前处理以1%乙酸-乙腈提取样品,应用MASP法对样品同时进行提取、盐析和净化,并利用气相色谱-质谱仪在选择离子扫描(SIM)模式下进行检测,以基质匹配标准溶液外标法定量。结果表明:丁烯氟虫腈在2~100 μg/L范围内线性关系良好,相关系数(r²)不小于0.999;在2~10 μg/kg添加水平范围内,丁烯氟虫腈的平均回收率为92.2%~97.5%,相对标准偏差(RSD, n=6)为2.69%~5.21%;方法检出限(S/N=3)为2 μg/kg;定量限(S/N=10)为6 μg/kg。本方法操作简便、快速、准确,可用于干性样品中丁烯氟虫腈的日常检测。同时,对丁烯氟虫腈的裂解机理进行了探讨。     

Quantification of cis-Abienol in Oriental Tobacco Leaves by LC

A rapid and accurate method for the quantification of cis-abienol in oriental tobacco leaves by normal phase liquid chromatography was developed. Freeze-dried tobacco samples were sonicated in methylene chloride for 10 min. The supernatant was purified using a silica gel solid phase extraction cartridge. Ten milliliter of the resulting methylene chloride eluate was collected, then separated on a 250 × 4.6 mm, 5 μm particle-size CN column with n-hexane: ethyl acetate, 100:2 (v/v) at a flow rate of 1 mL min⁻¹. cis-Abienol was detected by UV absorption at 254 nm. The linear range was from 2.14 × 10⁻⁴ to 4.28 × 10⁻² mg mL⁻¹ and the correlation coefficient was 1.000. The average recovery was 98.7, 105.2 and 103.1% in five replicated sets of tobacco samples spiked with 0.2856, 0.7140 and 1.904 mg cis-abienol. The relative standard deviations (RSDs) were 1.04, 0.63 and 1.25%, respectively (n = 5). Limit of detection (S/N = 3) was 21.84 μg g⁻¹ and limit of quantification (S/N = 10) was 72.80 μg g⁻¹. The method was found to be suitable for determination of cis-abienol in oriental tobacco leaves. Furthermore, pure cis-abienol used for method validation was obtained by preparative reversed phase high-performance liquid chromatography. Identification was performed by UV detection, nuclear magnetic resonance and mass spectrometry.     

Determination of enoxacin and ofloxacin by capillary electrophoresis with electrochemiluminescence detection in biofluids and drugs and its application to pharmacokinetics

A novel and sensitive method for the simultaneous determination of enoxacin and ofloxacin has been established using capillary electrophoresis (CE) coupled with electrochemiluminescence (ECL) detection based on the ECL enhancement of tri(2,2‐bipyridyl)ruthenium(II). The conditions for sample solvent type, CE separation and ECL detection were investigated systematically. The analytes were well separated and detected within 7 min. The limits of detection (S/N = 3) of enoxacin and ofloxacin are 9.0 × 10^?9 and 1.6 × 10^?8 mol/L, respectively. The precisions (RSD%) of intraday and interday are less than 2.1 and 4.0%, respectively. The limits of quantitation (S/N = 10) of enoxacin and ofloxacin are 3.2 × 10^?7 and 5.4 × 10^?7 mol/L in human urine samples and 4.1 × 10^?7 and 6.9 × 10^?7 mol/L in human serum samples, respectively. The recoveries of enoxacin and ofloxacin at different concentration levels in human urine, serum and eye drop samples are between 94.0 and 106.7%. The proposed method was successfully applied to the determination of the enoxacin and ofloxacin in human urine, serum and eye drop samples and the monitoring of pharmacokinetics of ofloxacin in human body. Copyright © 2009 John Wiley & Sons, Ltd.     

Ionic‐liquid‐mediated poly(dimethylsiloxane)‐ grafted carbon nanotube fiber prepared by the sol–gel technique for the head space solid‐phase microextraction of methyl tert‐butyl ether using GC

A headspace solid‐phase microextraction method was developed for the preconcentration and extraction of methyl tert‐butyl ether. An ionic‐liquid‐mediated multiwalled carbon nanotube–poly(dimethylsiloxane) hybrid coating, which was prepared by covalent functionalization of multiwalled carbon nanotubes with hydroxyl‐terminated poly(dimethylsiloxane) using the sol–gel technique, was used as solid‐phase microextraction adsorbent. This innovative fiber exhibited a highly porous surface structure, high thermal stability (at least 320°C) and long lifespan (over 210 uses). Potential factors affecting the extraction efficiency were optimized. Under the optimum conditions, the method LOD (S/N = 3) was 0.007 ng/mL and the LOQ (S/N = 10) was 0.03 ng/mL. The calibration curve was linear in the range of 0.03–200 ng/mL. The RSDs for one fiber (repeatability, n = 5) at three different concentrations (0.05, 1, and 150 ng/mL) were 5.1, 4.2, and 4.6% and for the fibers obtained from different batches (reproducibility, n = 3) were 6.5, 5.9, and 6.3%, respectively. The developed method was successfully applied to the determination of methyl tert‐butyl ether in different real water samples on three consecutive days. The relative recoveries for the spiked samples with 0.05, 1, and 150 ng/mL were between 94–104%.     

Synthesis,spectroscopic and crystallographic characterization of the cobalt(III) ternary mixed-ligand complexes of N(4)-allyl/methyl thiosemicarbazones, <Emphasis Type="Italic">N,N,N</Emphasis>′<Emphasis Type="Italic">,N</Emphasis>′-tetramethylethylenediamine and azide

Mixed-ligand ternary cobalt(III) complexes consisting of N,N,N′,N′-tetramethylethylenediamine (tmen), R-salicylaldehyde-N(4)-allyl/methyl thiosemicarbazones (R=3-OMe (L^I/L^II) or H (L^III/L^IV) and azide, of general formula [CoL(tmen)(N₃)], were synthesized and characterized by physico-chemical and spectroscopic methods. The crystal structure of [CoL^I(tmen)(N₃)] has a slightly distorted octahedral coordination geometry involving the O, N and S atoms of thiosemicarbazone.     

Ionic liquid‐based microwave‐assisted extraction for the determination of flavonoid glycosides in pigeon pea leaves by high‐performance liquid chromatography‐diode array detector with pentafluorophenyl column

In this study, an ionic liquid‐based microwave‐assisted extraction (ILMAE) followed by high‐performance liquid chromatograph y ‐diode array detector with a pentafluorophenyl column for the extraction and quantification of eight flavonoid glycosides in pigeon pea leaves is described. Compared with conventional extraction methods, ILMAE is a more effective and environment friendly method for the extraction of nature compounds from herbal plants. Nine different types of ionic liquids with different cations and anions were investigated. The results suggested that varying the anion and cation had significant effects on the extraction of flavonoid glycosides, and 1.0 M 1‐butyl‐3‐methylimidazolium bromide ([C4MIM]Br) solution was selected as solvent. In addition, the extraction procedures were also optimized using a series of single‐factor experiments. The optimum parameters were obtained as follows: extraction temperature 60°C, liquid–solid ratio 20:1 mL/g and extraction time 13 min. Moreover, an HPLC method using pentafluorophenyl column was established and validated. Good linearity was observed with the regression coefficients (r²) more than 0.999. The limit of detection (LODs) (S/N = 3) and limit of quantification (LOQs) (S/N = 10) for the components were less than 0.41 and 1.47 μg/mL, respectively. The inter‐ and intraday precisions that were used to evaluate the reproducibility and relative standard deviation (RSD) values were less than 4.57%. The recoveries were between 97.26 and 102.69%. The method was successfully used for the analysis of samples of pigeon pea leaves. In conclusion, the developed ILMAE‐HPLC‐diode array detector using pentafluorophenyl column method can be applied for quality control of pigeon pea leaves and related medicinal products.     

Development and validation of stir bar sorptive extraction of polar phenols in water followed by HPLC separation in poly(vinylpyrrolididone‐divinylbenzene) monolith

An effective and simple method for polar phenols in water matrix was developed by using stir bar sorptive extraction (SBSE) based on a hydrophilic poly(vinylpyrrolididone‐divinylbenzene) (VPDB) monolithic material and HPLC analysis. To achieve optimum extraction performance for phenols, several parameters, including extraction and desorption time, desorption solvent, pH value, and ionic strength of sample matrix, were investigated. Under the optimized experimental conditions, eight phenols were directly enriched from water samples and analyzed by HPLC‐DAD. The detection limits (S/N = 3) and quantification limits (S/N = 10) of the proposed method for the target compounds were achieved within the range of 0.72–1.37 and 2.40–4.27 ng/mL from spiked water, respectively. Recoveries of eight phenolic compounds were found in the range of 55.2–95.9%. The calibration curves showed the linearity ranging from 5 to 150 ng/mL with linear regression coefficient R² values above 0.98. Method repeatability presented as intra‐ and interday precisions were also found with the RSDs less than 4.10 and 7.61%, respectively. The distribution coefficients between VPDB and water (K_VPDB/W) for phenolic compounds were also calculated and compared with K_O/W. Finally, the proposed method was successfully applied to the determination of the target compounds in tap water, sea water and wastewater samples.     

Separation and determination of inorganic cations in beverages by capillary electrophoresis with indirect UV detection

A rapid, simple and reliable capillary electrophoresis method for the separation and quantitation of inorganic cations with indirect UV detection at 214 nm was developed. The electrolyte was: 12 mM imidazole as background absorbance provider; 5 mM malic acid and 1.0 mM 18-crown-6 ether as complexing agents; and 20% D₂O (v/v) to improve ion mobility. The pH was 4.25. The applied voltage was 22 kV at 22°C. Nine ions were completely separated and determined with correlation coefficients of 0.9979-0.9992. The relative standard deviations (RSD) were less than 0.5% for migration time and less than 5.2% for peak area (n=8). The detection limits (S/N=3) were from 0.08 mg L⁻¹ (for Na⁺) to 0.51 mg L⁻¹ (for Cu²⁺). To assess the reliability atomic absorption (AA) was also used to determine the same samples. Satisfactory results were obtained for real samples of jasmine tea drink and coconut milk.      

On‐line preconcentration strategy for the simultaneous quantification of three local anesthetics in human urine using CZE

The simultaneous determination of usually employed anesthetics (procaine, lidocaine, and bupivacaine) has been developed and validated using CE with ultraviolet detection at 212 nm. The separation of these three drugs has been achieved in less than 7 min, using a temperature of 25ºC and 25 kV, with a 150 mM citrate buffer (pH 2.5) as BGE. Field‐amplified sample injection (FASI) has been used for on‐line sample preconcentration. Ultrapure water and ACN 50/50 (v/v) mixture gave the greatest enhancement factor when it was employed as an injection solvent. Injection voltage and time were optimized, being 13 kV and 13 s, the optimum values, respectively. To avoid the possible irreproducibility associated with the electrokinetic injection, an internal standard such as tetracaine, was employed. The instrumental detection limits (LOD S/N = 3) for the compounds ranged between 2.6 and 7.0 μg L⁻¹ and the quantitation limits (LOQ S/N = 10) between 37.8 and 55.9 μg L⁻¹. The detection limits obtained in real human urine samples ranged between 55.2 and 83.6 μg L⁻¹ and the quantitation limits between 196.0 and 276.0 μg L⁻¹. The proposed method has demonstrated its applicability to the analysis of these local anesthetics in urine samples without any pretreatment, allowing the rapid determination of these target analytes.     

Liquid Chromatographic Determination of Cationic Surfactants in Environmental Samples using a Continuous Post-Column Ion-Pair Extraction Detector with a Sandwich Phase Separator

Abstract

A new detection technique is described for the quantitative analysis of cationic surfactants by HPLC via post-column ion-pair formation. A new sandwich type phase separator, as part of the extraction detector, was successfully introduced. The method was used to determine ditallowdimethylammonium chloride (DTDMAC) in various environmental samples. Detection limits of DTDMAC in river water were about 2 μg/1 (60 ng absolute; S/N = 5) and 10 ng/1 (260 pg absolute; S/N = 5), using methyl orange and 9,10-dimethoxyanthracene-2-sulphonate (DAS) as ion-pairing reagents, respectively. The environmental concentration of DTDMAC found on random samples from two Belgian rivers range from 30 to 40 μg/1. The reproducibility of the determination of DTDMAC in river water was 4.2% (RSD) (n = 20).     

Syntheses,Structures, and Properties of the Complexes [Ag(N∧S)n](X), N∧S = 1‐Methyl‐2‐(alkylthiomethyl)‐1H‐benzimidazoles,X = PF6 (n = 2) or PO2F2 (n = 1)

The complexes [Ag(η²‐N∧S)₂](PF₆), N∧S = 1‐methyl‐2‐(methylthiomethyl)‐1H‐benzimidazole, mmb (complex 1 ) or 1‐methyl‐2‐(tert‐butylthiomethyl)‐1H‐benzimidazole, mtb (complex 2 ), and [Ag(μ,η²‐mmb)(μ,η²‐O₂PF₂)] (complex 3 ) were synthesized and characterized by X‐ray crystallography. Long Ag–S (ca. 2.70 Å) and shorter Ag–N bonds (ca. 2.23 Å) are part of characteristically distorted tetrahedral coordination arrangements at the silver(I) ions in 1 and 2 . Unexpectedly, the comparison with the copper analogue [Cu(η²‐mmb)₂](PF₆) reveals a more tetrahedral and less linear coordination arrangement for the corresponding silver species. Compound 3 as obtained by hydrolysis of the PF₆ ion or by the use of AgPO₂F₂ exhibits bridging mmb and η²‐difluorophosphate ligands in a chain‐type structure.     

热辅助下的在线甲基衍生化-气相色谱法分析银杏叶中的银杏酸

采用热辅助下的在线甲基衍生化-气相色谱法测定银杏叶中的银杏酸。银杏叶样品与衍生化试剂四甲基氢氧化铵(TMAH, 25%甲醇溶液)同时进样,在300 ℃的进样口瞬间生成了银杏酸甲基衍生物,银杏叶中6种银杏酸得到很好的分离。在一定的质量浓度范围内银杏酸的线性关系良好,回归系数均大于0.9966,最低检出限范围为0.8～2.8 mg/kg。银杏叶中主要的烷基酚类物质为银杏酸C13∶0,C15∶1和C17∶1,它们的含量(用质量分数表示)分别为11.0%,36.7%和42.8%,3次平行测定的相对标准偏差(RSD)均小于3.4%(n=3)。银杏叶样品中总银杏酸的含量为4.0～10.9 mg/g。该方法无需繁琐费时的衍生化和纯化等前处理步骤,不失为银杏叶中银杏酸测定的一种快速、简便、准确的方法。     

固相萃取-高效液相色谱法测定水果和果酱中的6种对羟基苯甲酸酯

建立了固相萃取-高效液相色谱(SPE-HPLC)同时测定水果和果酱中6种对羟基苯甲酸酯(对羟基苯甲酸甲酯、对羟基苯甲酸乙酯、对羟基苯甲酸异丙酯、对羟基苯甲酸丙酯、对羟基苯甲酸异丁酯和对羟基苯甲酸丁酯)含量的方法。经Oasis HLB固相萃取柱净化的样品采用HPLC分离,优化的色谱条件为采用Symmetry-C18色谱柱分离,流动相为柠檬酸缓冲液-甲醇(体积比为48:52),流速1.0 mL/min,检测波长258 nm,测定温度40 ℃。6种对羟基苯甲酸酯的线性范围为0.1～20.0 mg/L(r=0.9999),回收率为82.8%～115.5%,相对标准偏差为0.2%～6.8%(n=6)。对羟基苯甲酸甲酯、对羟基苯甲酸乙酯、对羟基苯甲酸异丙酯、对羟基苯甲酸丙酯的检出限(S/N=3)为0.1 mg/kg,定量限(S/N=10)为0.3 mg/kg;对羟基苯甲酸异丁酯和对羟基苯甲酸丁酯的检出限为0.2 mg/kg,定量限为0.6 mg/kg。该方法简便快速、结果准确、重现性好,可作为测定水果及果酱中多种对羟基苯甲酸酯的有效方法。     

QuEChERS-超高效液相色谱-串联质谱法测定坚果中38种农药残留

建立了检测4种坚果(花生、杏仁、腰果、核桃)中38种农药残留的QuEChERS-超高效液相色谱-串联质谱(UPLC-MS/MS)方法.样品均质后,用乙腈进行提取,经PSA和C18净化后,采用Oasis PRiME HLB固相萃取柱进一步净化, UPLC-MS/MS分析.对样品前处理和色谱方法进行了优化.在多重反应监测(MRM)模式下进行质谱分析,外标法定量.38种农药的检出限范围(S/N=3)为0.01~10 μg/kg,定量限(S/N=10)为0.05~20 μg/kg,线性关系良好(r>0.991).4种坚果中农药的平均加标回收率为51.0%~126.0%,相对标准偏差均小于20%.此方法灵敏、准确、有效,可用于坚果类食品中多种农药残留的同时测定.     

Metallorganische 5d6‐Übergangsmetallkomplexe von zwei 1‐Methyl‐(2‐alkylthiomethyl)‐1H‐benzimidazol‐Liganden: Strukturen und elektrochemische Oxidation

Organometallic 5d⁶ Transition Metal Complexes of 1‐Methyl‐(2‐alkylthiomethyl)‐1H‐benzimidazole Ligands: Structures and Electrochemical Oxidation The complexes [(mmb)Re(CO)₃Cl], [(mtb)Re(CO)₃Cl], [(mmb)OsCl(Cym)](PF₆) and [(Cym)OsCl(mtb)](PF₆) where Cym = p‐cymene, mmb = 1‐methyl‐(2‐methylthiomethyl)‐1H‐benzimidazole and mtb = 1‐methyl‐(2‐tert‐butylthiomethyl)‐1H‐benzimidazole were synthesized and, except for the latter, structurally characterized. In comparison with other late transition metal compounds of these N‐S chelate ligands the rhenium(I) systems exhibit a balanced coordination to both N and S donor atoms. Anodic one‐electron oxidation produces EPR‐silent rhenium(II) states whereas the osmium(III) species [(mmb)OsCl(Cym)]²⁺ could be identified via EPR and UV/VIS spectroelectrochemistry.     

Reduced Graphene Oxide Supported Cobalt Bipyridyl Complex for Sensitive Detection of Methyl Parathion in Fruits and Vegetables

Herein, we are described a green route to prepare reduced graphene oxide supported cobalt inorganic complex nanocomposite (GRGO/[Co(bpy)₃]) (bpy=2,2′‐bipyridine) through facile and wet chemical approach. The formation of the nanocomposite was confirmed through suitable physical and chemical characterization techniques. The GRGO/[Co(bpy)₃] nanocomposite was coated on the pretreated glassy carbon electrode (GCE). The GCE/GRGO/[Co(bpy)₃] modified electrode has excellent electrocatalytic ability towards methyl parathion reduction, while the overpotential drops drastically to –0.18 V (vs. Ag/AgCl). Moreover, the effect of concentration, scan rate and electrolyte pH were detail studied. Besides, the linear response range was 0.05‐1700 μM and the detection limit was 0.0029 μM (S/N=3) and the sensitivity was 1.8197 μA μM⁻¹ cm⁻². Moreover, the fabricated electrode has high level of selectivity, which delivers satisfactory repeatability, reproducibility and stability. The sensing method was successfully demonstrated in real samples such as, tomato and apple samples.     

Direct injection HPLC method for the determination of selected phenothiazines in plasma using a Hisep column

A direct plasma injection HPLC method has been developed for the determination of selected phenothiazines (promethazine, promazine, chlorpromazine) using a Hisep column. The method is easy to perform and requires 20 microL of a filtered plasma sample. The chromatographic run time is less than 11 min using a mobile phase of 15:85 v/v acetonitrile-0.18 m ammonium acetate pH 5.0 and UV detection at 254 nm. The method is linear in the concentration range 0.1-25 microg mL(-1) (r > 0.99, n = 6) for each analyte with RSD less than 6%. Interday and intraday variability were found to be < or =14%. The limits of detection and quantitation were 0.1 (S/N > 3) and 0.25 microg mL(-1) (S/N > 10), respectively, for each of the three phenothiazines. We can also apply this method to separate three other phenothiazines (ethopromazine, trifluoroperazine, prochlorperazine), although it lacks the selectivity to determine the concentration of all six drugs concurrently. The separation is feasible using these drugs in certain combinations.