CdTe-Ru(bpy)32 体系阴极电致化学发光法测定邻苯二酚

根据邻苯二酚对CdTe量子点增敏的Ru(bpy)3₂ 阴极电致化学发光的强度有较强的抑制作用,建立了一种简单的测定邻苯二酚的电致化学发光(ECL)分析方法。实验依次探究了磷酸盐缓冲溶液的浓度、pH值、量子点的浓度、Ru(bpy)3₂ 的浓度、扫描速率以及电位等因素对该体系发光行为的影响。在最佳实验条件下,电致化学发光强度的对数与邻苯二酚浓度的对数在7.0×10_?8～4.0×10_?5 mol L_?1范围内呈现良好的线性关系,检出限为2.3×10_?8 mol L_?1(3σ)。对4.0×10_?6 mol L_?1的邻苯二酚标准溶液进行六次平行测定,其电致化学发光强度的相对标准偏差(RSD)为1.1 %。进一步,该方法可成功应用于模拟环境水样中邻苯二酚的含量测定,加标回收率介于95.0～105.7 %之间。     

基于Ru(bpy)■-三乙胺体系的电致化学发光生物传感器检测葡萄糖

联吡啶钌(Ru(bpy)■)拥有优良的电致化学发光(ECL)性能,但其较好的水溶性使其固载面临巨大问题。该文制备了Pt纳米粒子与Ru(bpy)■的复合物(Pt NPs-Ru),将其修饰于电极并进一步固载葡萄糖氧化酶(GOx)制得传感器。基于H₂O₂对Ru(bpy)■-三乙胺体系ECL信号的猝灭作用,随着葡萄糖浓度的增加,其在GOx的催化下原位产生的H₂O₂量增多,导致ECL信号逐渐减弱,从而实现葡萄糖的检测。ECL强度与葡萄糖浓度的对数在1.0×10^-8～5.0×10^-5 mol/L范围内呈良好的线性关系,检出限低至5.2×10^-9 mol/L。传感器具有好的稳定性和高的选择性。Pt NPs-Ru复合物为ECL传感器的构建提供了良好平台,为葡萄糖检测提供了新方法。     

Cu(bpy)2+2与鸟嘌呤及鸟苷相互作用的研究

在中性磷酸盐缓溶冲液中，用电化学和荧光光谱法研究了Cu(bpy)²⁺₂与鸟嘌呤和鸟苷的相互作用。结果表明鸟嘌呤和鸟苷与Cu(bpy)²⁺₂的配位比均为1∶1，配位常数分别为4.62×10⁴ L/mol和1.96×10⁴ L/mol。紫外光谱电化学实验进一步表明，鸟嘌呤或鸟苷与Cu(bpy)²⁺₂发生了相互作用。     

Co(phen)33+与6-巯基嘌呤及DNA间相互作用的研究

自1969年首次报道顺铂(cis-[Pt(NH 3 ) 2 Cl 2 ])对肿瘤有强烈抑制作用以来,金属配合物抗肿瘤药物的研究倍受重视 [1,2] ?很多抗肿瘤药物治疗恶性肿瘤疾病都是通过切割人体肿瘤细胞的DNA来实现的?DNA与外源性分子相互作用的研究构成肿瘤形成的机理和一些抗肿瘤药物作用机理的基     

La7O6(BO3)(PO4)2:Eu3+/Tb3+荧光材料的制备及其光致发光性能

采用优化的高温固相方法制备了稀土离子Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂系荧光材料,并对其物相行为、晶体结构、光致发光性能和热稳定性进行了详细研究。结果表明,La₇O₆（BO₃）（PO₄）₂：Eu³⁺材料在紫外光激发下能够发射出红光,发射光谱中最强发射峰位于616 nm处,为⁵D₀→⁷F₂特征能级跃迁,Eu³⁺的最优掺杂浓度为0.08,对应的CIE坐标为（0.610 2,0.382 3）;La₇O₆（BO₃）（PO₄）₂：Tb³⁺材料在紫外光激发下能够发射出绿光,发射光谱中最强发射峰位于544 nm处,对应Tb³⁺的⁵D₄→⁷F₅能级跃迁,Tb³⁺离子的最优掺杂浓度为0.15,对应的CIE坐标为（0.317 7,0.535 2）。此外,对2种材料的变温光谱分析发现Eu³⁺和Tb³⁺掺杂的La₇O₆（BO₃）（PO₄）₂荧光材料均具有良好的热稳定性。     

(ZrO2)0.92(Gd2O3)0.08纳米晶的水热合成及其烧结体的电性能

用新制备的(Gd，Zr)(OH)_x·yH₂O共沉淀作前驱体，在强碱性介质中用水热法合成了(ZrO₂)_0.92(Gd₂O₃)_0.08纳米立方晶，考察了反应温度、pH值等水热反应条件对纳米晶粒大小的影响。将(ZrO₂)_0.92(Gd₂O₃)_0.08     

Ca9Y(PO4)7:Ce3+,Tb3+纳米荧光粉的制备及发光性能

采用水热法制备出Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺纳米荧光粉,通过XRD、SEM和荧光光谱等对样品进行了分析,研究在Ca₉Y（PO₄）₇基质中引入Ce³⁺,Tb³⁺离子对发光性能的影响规律。研究发现因Tb³⁺离子自身能量交叉驰豫的存在,使得单掺Tb³⁺时,通过调节Tb³⁺离子的浓度可以实现对发光颜色的控制。同时研究了Ce³⁺-Tb³⁺之间的能量传递为电多极相互作用的偶极-四极机制,Ce³⁺-Tb³⁺之间最大的能量传递效率为55.6%。Ca₉Y（PO₄）₇：Ce³⁺,Tb³⁺的发光颜色可以通过激活离子之间的能量传递和共发射得到可控调节。SEM分析表明荧光粉颗粒尺寸在100 nm左右,分散性好。     

Ru(bpy)2+3 在MCM-48中的组装及其发光性质

无机微孔晶体具有均一的孔径和特殊的孔道及笼结构, 已被证明是一类优良的功能组装载体. 早期合成的微孔沸石分子筛晶体的孔道直径一般小于1 nm, 很难直接组装尺寸较大的功能分子, 因而Ru(bpy)2+3在Na-Y沸石分子筛中的组装只能采取所谓的"瓶中造船"方法, 该方法的缺点是反应过程较复杂, 反应条件较苛刻, 容易产生杂质且无法除去.     

KMgF3∶Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce³⁺→Tb³⁺的发光特性以及它们之间的相互作用,结果表明KMgF₃∶Ce³⁺,Tb³⁺纳米粒子中存在Ce³⁺→Tb³⁺的能量传递过程,即Ce³⁺可以将吸收的能量直接传递给Tb³⁺离子,使得Tb³⁺的绿色发光强度大为增加。     

玻碳电极上Ru(bpy)32+的吸附及其电致化学发光的研究

通过电化学循环伏安法和电致化学发光方法, 研究了Ru(bpy)₃²⁺在玻碳电极上的吸附, 研究结果表明, Ru(bpy)₃²⁺的浓度和与玻碳材料接触的时间, 直接影响了Ru(bpy)₃²⁺在玻碳上的吸附. 还考察了吸附的 在玻碳电极上被氧化后脱附的情况.     

A Novel Electrogenerated Chemiluminescence (ECL) Sensor Based on Ru(bpy)32+‐Doped Titania Nanoparticles Dispersed in Nafion on Glassy Carbon Electrode

A novel electrogenerated chemiluminescence (ECL) sensor based on Ru(bpy)₃²⁺‐doped titania (RuDT) nanoparticles dispersed in a perfluorosulfonated ionomer (Nafion) on a glassy carbon electrode (GCE) was developed in this paper. The electroactive component‐Ru(bpy)₃²⁺ was entrapped within the titania nanoparticles by the inverse microemulsion polymerization process that produced spherical sensors in the size region of 38±3 nm. The RuDT nanoparticles were characterized by electrochemical, transmission electron and scanning microscopy technology. The Ru(bpy)₃²⁺ encapsulation interior of the titania nanoparticles maintains its ECL efficiency and also reduces Ru(bpy)₃²⁺ leaching from the titania matrix when immersed in water due to the electrostatic interaction. This is the first attempt to prepare the RuDT nanoparticles and extend the application of electroactive component‐doped nanoparticles into the field of ECL. Since a large amount of Ru(bpy)₃²⁺ was immobilized three‐dimensionally on the electrode, the Ru(bpy)₃²⁺ ECL signal could be enhanced greatly, which finally resulted in the increased sensitivity. The ECL analytical performance of this ECL sensor for tripropylamine (TPA) was investigated in detail. This sensor shows a detection limit of 1 nmol/L for TPA. Furthermore, the present ECL sensor displays outstanding long‐term stability.     

Electrochemiluminescence of SDBS‐Ru(bpy)32+‐CPM System and Its Application

When the concentration of dodecyl benzene sulfonic acid sodium salt (SDBS) is 0.7 mmol·L^?1, the electrochemical and electrochemiluminescence (ECL) intensity of Ru(bpy)₃²⁺‐chlorpheniramine maleate (CPM) system at the Au electrode were studied. The results showed that compared with the absence of SDBS, enhancement of the ECL intensity was 14‐fold at Au electrode. Base on this, an ECL method was established for efficient and simple determination of CPM at Au electrode. Under the optimum experimental condition, the enhanced ECL intensities had good linear relationship with the concentration of CPM in the range of 1.0×10^?4–1.0×10^?7 mol·L^?1, and a linear regression equation was obtained as follows: I (counts)=48.805×10⁶c+394.03 (r=0.9975), the detection limit for CPM was 1.4×10^?8 mol·L^?1. The RSD for 5 times determinations of 1.0×10^?5 mol·L^?1 CPM was 3.2%. The results of recovery test were between 96.3%–102.5%, and the RSD of recovery test (n=5) was 2.7%. In addition, eleven kinds of tertiary amines‐Ru(bpy)₃²⁺ systems were investigated in the absence and presence of SDBS. The results showed that the enhancement of SDBS on ECL intensity of tertiary amines‐Ru(bpy)₃²⁺ systems was universal.     

基于MCM-41负载联吡啶钌的电致化学发光传感器

利用静电吸附作用将联吡啶钌[Ru(bpy)₃²⁺]负载到巯基化MCM-41介孔二氧化硅纳米颗粒上, 通过金-巯键修饰法将负载后的MCM-41固定在金电极表面, 发展了一种基于MCM-41负载联吡啶钌的电致化学发光传感器, 并研究了其电化学及电致化学发光行为. 基于三聚氰胺与增敏剂三正丙胺氨基结构的相似性, 将负载Ru(bpy)₃²⁺的MCM-41电致化学发光传感器用于三聚氰胺的检测, 获得了良好的检测效果, 为检测三聚氰胺提供了一种快速、简便的方法. 同时, 该研究为Ru(bpy)₃²⁺在电极表面的固定化提供了新思路.     

Effects of Divalent Metal Ions on Electrochemiluminescence Sensor with Ru(bpy)32+ Immobilized in Eastman‐AQ Membrane

Different effects of divalent metal ions on electrochemiluminescence (ECL) sensor with Ru(bpy)₃²⁺ immobilized in Eastman‐AQ membrane were investigated. Mg²⁺, Ca²⁺ and Fe²⁺ can elevate the ECL of Ru(bpy)₃²⁺/proline; while metal ions that underwent redox reactions on the electrode such as Mn²⁺ and Co²⁺ presented intensive quenching effects on Ru(bpy)₃²⁺ ECL. Also, the quenching effect of Mn²⁺ on the ECL sensor with Ru(bpy)₃²⁺ immobilized in Eastman‐AQ membrane enhanced to about 30‐folds compared with the case that Ru(bpy)₃²⁺ was dissolved in phosphate buffer, and the enhanced quenching effects of Mn²⁺ were studied.     

Construction and Characterization of Ru(II)Tris(bipyridine)‐Based Silica Thin Film Electrochemiluminescent Sensors

Ru(II) tris‐bipyridine based ECL sensors were produced by embedding the complex inside silica glass thin films deposited via a sol‐gel dipping procedure on K‐glass conducing substrates. Films were prepared starting from a pre‐hydrolyzed ethanolic solution of Si(OC₂H₅)₄ and Ru(bpy)₃Cl₂. Transparent, crack‐free and homogeneous reddish silica layers, having a thickness of 200±20 nm, were obtained. The films, either deposited at room temperature or thermally annealed at 100, 200 and 300 °C for 30 h, were structurally and chemically characterized. Ru(bpy)₃Cl₂ thermal stability was previously checked by thermogravimetric analysis (TGA). The films were investigated by X‐Ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS) and UV‐vis spectroscopy. XPS in‐depth profiles revealed a homogeneous distribution of the ruthenium complex inside the silica thin layers. SIMS data suggested that the embedded Ru(bpy)₃Cl₂ did not react with oxygen inside the oxygen‐rich silica matrix to give Ru‐O bonds. Electrochemical and ECL characterization of the thin film electrodes were made by means of cyclic voltammetry (CV) and controlled potential step experiments. The ECL sensor showed a diffusive redox behavior of the Ru(bpy)₃²⁺/Ru(bpy)₃³⁺ system. Light emission produced from the reaction between oxalic acid and the electrogenerated Ru(bpy)₃³⁺ was larger and stable when thermally treated electrodes were used after a suitable hydration period. The 300 °C treated sample was the best performing sensor both in terms of low complex leakage and sensitivity. Calibration plots relative to oxalic acid were obtained both in stationary and in flowing solutions in the concentration range 2×10^?6?3×10^?4 M. A linear behavior appeared in the former case, while in the latter a slight curvature was evident as a consequence of a finite diffusion time of the analyte inside the thin film. The signal repeatability, obtained by multiple 100 μL of 10^?5 M oxalic acid injections in flowing solutions, was better than 4%. The obtained detection limit (computed as three times the standard deviation of the base‐line noise) was 10^?6 M as oxalic acid.     

Electrogenerated Chemiluminescence Sensor Based on Tris(2,2′‐bipyridine)ruthenium(II)‐Immobilized Natural Clay and Ionic Liquid

A novel electrogenerated chemiluminescence (ECL) sensor based on natural clay and ionic liquid was fabricated. Tris(2,2′‐bipyridine)ruthenium(II) (Ru(bpy)₃²⁺) was immobilized on natural clay surface through simple adsorption. An ECL sensor was prepared by mixing Ru(bpy)₃²⁺‐incorporated clay, graphite powder and an ionic liquid (1‐butyl‐3‐methylimidazolium hexafluorophosphate) as the binder. The electrochemical behavior and ECL of the immobilized Ru(bpy)₃²⁺ was investigated. It was observed that the ECL of immobilized Ru(bpy)₃²⁺ was activated by the ionic liquid. The proposed ECL sensor showed high sensitivity to tri‐n‐propylamine (TPrA) and the detection limit was found to be 20 pM. In addition, the ECL sensor displayed good stability for TPrA detection and long‐term storage stability.     

A Solid‐State Electrochemiluminescence Immunosensor Based on MWCNTs‐Nafion and Ru(bpy)32+/Nano‐Pt Nanocomposites for Detection of α‐Fetoprotein

A approach was successfully employed for constructing a solid‐state electrochemiluminescence (ECL) immunosensor by layer‐by‐layer self‐assembly of multiwall carbon nanotubes (MWCNTs)‐Nafion composite film, Ru(bpy)₃²⁺/nano‐Pt aggregates (Ru‐PtNPs) and Pt nanoparticles (PtNPs). The influence of Pt nanoparticles on the ECL intensity was quantitatively evaluated by calculating the electroactive surface area of different electrodes with or without PtNPs to immobilize Ru(bpy)₃²⁺. The principle of ECL detection for target α‐fetoprotein antigen (AFP) was based on the increment of resistance after immunoreaction, which led to a decrease in ECL intensity. The linear response range was 0.01–10 ng mL^?1 with the detection limit of 3.3 pg mL^?1. The immunosensor exhibited advantages of simple preparation and operation, high sensitivity and good selectivity.     

联吡啶钌电化学发光研究进展

联吡啶钌电化学发光在免疫分析、核酸分析、共反应物分析和适配子传感器等方面具有广泛的应用前景,成为在诸多电化学发光体系如9,10-二苯基蒽、光泽精、联吡啶钌、过氧化草酸酯、鲁米诺、石墨烯和量子点等之中近年来国际上研究最多的电化学发光体系之一.本综述对已发表的绝大多数联吡啶钌电化学发光成果加以归纳总结,简要介绍联吡啶钌电化学发光的概况,并尝试展望其今后的研究趋势.     

Electrogenerated Chemiluminescence Ethanol Biosensor Based on Carbon Nanotube‐Titania‐Nafion Composite Film

Mesoporous titania‐Nafion composite doped with carbon nanotube (CNT) has been used for the immobilization of tris(2,2′‐bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) and alcohol dehydrogenase on an electrode surface to yield a highly sensitive and stable electrogenerated chemiluminescence (ECL) ethanol biosensor. The presence of CNT in the composite film increases not only the sensitivity of the ECL biosensor but also the long‐term stability of the biosensor. The present biosensor responds linearly to ethanol in the wide concentration ranges from 1.0×10^?5 M to 1.0×10^?1 M with a detection limit of 5.0×10^?6 M (S/N=3). The present ECL ethanol biosensor exhibited higher ECL response compared to that obtained with the ECL biosensor based on the corresponding composite without CNT. The present CNT‐based ECL biosensor showed good long‐term stability with 75% of its initial activity retained after 2 weeks of storage in 50 mM phosphate buffer at pH 7.0.     

有机改性溶胶-凝胶固定联吡啶钌修饰电极的电化学行为

采用有机改性溶胶一凝胶制备技术,以四甲氧基硅烷(TMOW)和二甲基二甲氧基硅烷(OiMe-DiMOS)为共先驱体包埋聚苯乙烯磺酸钠(PSS),通过离子交换成功地将联吡啶钌固定在玻碳电极表面。电化学研究结果表明,被固定的联吡啶钌保持了良好的电化学活性,同时该方法制备的修饰电极对甲基安非他明有灵敏的电化学响应。