中能核反应中反应平面的确定

介绍并分析了中高能核反应过程中与反应平面相关的可观测量 ,以及确定核反应平面的各种方法 .这些方法包括裂变碎片方位角测量、类弹碎片测量、动量流球形张量、横向动量的方向性、方位角关联和Fourier谐波分析等 . Observables that related to the nuclear reaction plane in intermediate and relativistic energy heavy ion reactions are discussed. Reaction plane determination for intermediate and relativistic energy heavy ion reactions is presented. The methods include fission fragments measurement, projectile-like fragments measurement, kinetic flow-tensor, transverse momentum directivity, azimuthal correlation, Fourier series and etc.     

中能核反应中碰撞参数的确定

介绍了中高能核反应过程中与碰撞参数相关的可观测量.确定碰撞参数的各种方法 ,以及这些方法的适用范围和可靠性.这些方法包括约化线性动量转移、带电离子多重性、横向动量的方向性、横向动能和纵向动能的比 Erat、 Zbound和椭圆流参量. Observables that related to the impact parameters in intermediate and relativistic energy heavy ion reactions were introduced. These observables that related to the impact parameter include linear momentum transfer, multiplicities of charged particles, the ratio of transverse kinetic energy and longitudinal kinetic energy E rat , the transverse momentum directivity, Z bound , elliptic flow etc. Impact parameter determination for intermediate and relativistic energy heavy...     

K介子协变动力学及其准粒子模型的性质

简要综述了中高能重离子碰撞中K介子的产生及研究进展。重点介绍了K介子协变动力学模型, 并在此框架内分析了中高能重离子碰撞中K+介子以及与其伴随产生的Λ超子的集体流特征。 结果表明: 协变动力学模型能够很好地给出K+介子和Λ超子的微分直接流。 相对而言, 软势给出的集体流与实验值符合更好。同时, 通过对不同输运模型中K介子准粒子模型的基本属性进行对比分析, 明确了协变动力学模型中K介子准粒子模型的质量及能量随核物质密度的变化特征, 以及周围核子的运动对于K介子基本属性的影响。In the present paper, we briefly review the progress in the study of kaon production in heavy\|ion collisions at intermediate and high energies and introduce the covariant kaon dynamics model. The collective flows of positively charged kaon and the lambda hyperon associated produced with kaon are studied in the framework of the dynamics. It shows that the directed differential flow of K+ meson and Λ hyperon can be reasonably reproduced in the covariant kaon dynamics model. The calculated results with soft equation of nuclear matter are in better agrement with experimental data. Meawhile, a detailed comparison of the properites of different quasi\|particle models in various transport model and the influence of nucleon’s movement on the effective mass and energy of the quasi\|particle in the covariant kaon dynamics model are discussed.     

量子色动力学与核物理

概述了量子色动力学和中高能核物理在核散射、核子特性及核子－核子相互作用势方面的密切联系． The close relation between quantum chromodynamics (QCD) and the nuclear.physics in medium and high energy regions is briefly reviewed in some aspects such as nuclear scatterings, nueleon propertics as well as the interactions between nucleons.     

中高能核反应中的热化

用微观动力学模型研究了中高能核反应中的热化．对８３０ＭｅＶｐ＋５６Ｆｅ和３５ＭｅＶ／ｕ４０Ｃａ＋４０Ｃａ反应的研究表明，反应系统基本上达到了统计热平衡．发现两核碰撞过程中存在明显的横向流． Thermalization in intermediate high energy reaction is studied by microscopic kinetic model. The calculations are carried out for reactions 830 MeV p+ 56 Fe and 40Ca ( E =35 MeV/u )+ 40Ca. The calculations show that the quasi equilibrium can be reached. It is found that there is an obvious transverse flow in the nucleus nucleus reaction process.     

塑料闪烁体中子探测效率及相对发光产额的标定

利用加速器中子源研究了用于标定塑料闪烁体中子探测效率及相对发光产额的实验技术 ,在四川大学原子核科学技术研究所 2 .5MeV静电加速器上 ,利用T(p,n)和D(d ,n)核反应作为中子源 ,在 0 .6—5MeV中子能区对直径为 40mm ,厚度为 5mm的 1 42 1塑料闪烁体的中子探测效率及相对发光产额进行了测定.A method used for the calibration of neutron efficiency and the relative photo yield of plastic scintillator is studied. T(p,n) and D(d,n) reactions are used as neutron resources. The neutron efficiencies and the relative photo yields of plastic scintillators 1421 (40 mm in diameter and 5 mm in thickness) are determined in the neutron energy range of 0.655—5 MeV.     

INDRA 能区重离子输运过程的系统研究及对称能探测

基于改进的极端相对论量子分子动力学(UrQMD) 输运模型,通过细致考察初始化、状态方程及两体碰撞等系统研究了INDRA 能区重离子碰撞后出射的自由核子及轻粒子的集体流和核阻止本领等观测量。研究发现,一个采用带动量依赖的软的状态方程及动量修正的密度依赖的核子核子弹性散射截面的动力学输运过程能够很好描述INDRA 全能域内实验获得的中心快度区的氢同位素的直接流。利用该套输运系统还研究了直接流平衡能对对称势能密度依赖强度因子的敏感性。发现,出射的自由中子平衡能敏感依赖于对称势能的密度依赖,而自由质子却不会。同时还发现,利用两Sn 同位素系列反应出射的自由中子直接流的平衡能与初始中子/质子比的关系可以很好地探测对称能的密度依赖。The terms of initialization, equation of state (EoS), and two-body collision in the updated ultrarelativistic quantum molecular dynamics (UrQMD) model are examined in details so as to systematically study the collective flows and the nuclear stopping of free nucleons and light clusters from heavy-ion collisions at INDRA energies. It is seen that at INDRA energies the dynamic transport with a soft EoS with momentum dependence and with the momentum-modified density-dependent nucleon-nucleon elastic cross sections describes the directed flow exhibited by hydrogen isotopes (Z= 1) emitted at midrapidity fairly well. The sensitivity of the balance energy (Ebal) of the directed flow to the strength parameter of the density dependence of symmetry potential energy is further studied with the same parameter set. It is found that the Ebal of neutrons from HICs is particularly sensitive to the density dependence of the symmetry potential energy, while that of protons is not. And, the initial neutron/proton ratio dependence of the balance energy of neutrons from Sn isotopes can be taken as a useful probe to constrain the stiffness of the nuclear symmetry energy.     

Flutter of Finite-Span Flexible Plates in Uniform Flow

The flutter instability and response of finite-span flexible plates in uniform flow are investigated experimentally. The effects of the plate aspect ratio on its dynamic responses are mainly analyzed. A hysteretic phenomenon is observed and can be described such that the plate flutters spontaneously as the flow velocity is greater than a critical value UC and the plate returns to its stable state as the flow velocity is slowly decreased to another critical one UD. We find that the aspect ratio has a greater effect on UC than on UD. The flutter frequency decreases and the amplitude increases with the increase in the flow velocity. When the flutter instability of the plate occurs, three typical flutter modes are identified and are associated with the aspect ratio and the flow velocity.     

高能质子引起器件单粒子效应的研究方法

简略介绍了高能质子在半导体芯片中引起单粒子效应的实验测量和理论分析方法,包括核反应分析方法、半经验方法,介绍了质子和重离子翻转截面间的关系,并用重离子实验数据预测器件在质子环境下的翻转率. This article introduces briefly the experimental and theoretical methods that have been used to study high energy proton induced single event effect in semiconductor devices. The theoretical methods including nuclear reaction analysis method and semi empirical method are presented. The relationship of upset cross section between proton and heavy ions is described. Finally, on orbit proton upset rates are predicted by using the heavy ion test data.     

Particle path tracking method in two- and three-dimensional continuously rotating detonation engines

The particle path tracking method is proposed and used in two-dimensional（2D） and three-dimensional（3D） numerical simulations of continuously rotating detonation engines（CRDEs）. This method is used to analyze the combustion and expansion processes of the fresh particles, and the thermodynamic cycle process of CRDE. In a 3D CRDE flow field, as the radius of the annulus increases, the no-injection area proportion increases, the non-detonation proportion decreases, and the detonation height decreases. The flow field parameters on the 3D mid annulus are different from in the 2D flow field under the same chamber size. The non-detonation proportion in the 3D flow field is less than in the 2D flow field. In the 2D and 3D CRDE, the paths of the flow particles have only a small fluctuation in the circumferential direction. The numerical thermodynamic cycle processes are qualitatively consistent with the three ideal cycle models, and they are right in between the ideal F–J cycle and ideal ZND cycle. The net mechanical work and thermal efficiency are slightly smaller in the 2D simulation than in the 3D simulation. In the 3D CRDE, as the radius of the annulus increases, the net mechanical work is almost constant, and the thermal efficiency increases. The numerical thermal efficiencies are larger than F–J cycle, and much smaller than ZND cycle.     

正方形小通道内的非牛顿流体-氮气两相流动流型的实验研究

对水力直径为2.5 mm的正方形小通道内的非牛顿流体-氮气的垂直向上两相流动流型进行了可视化实验,工质分别为:浓度0.2%的聚丙烯酰胺(PAM)和0.2%的黄原胶(XG)水溶液,表观气速0.1～100 m/s,表观液速0.01～6 m/s.观察到的典型流型有:弹状流、搅拌流、弹环状流和环状流,其中弹环状流未见于水-空气上升流动.在PAM-氮气实验中发现了一种新流型-泡状-弹状流.通过流型图对比,发现非牛顿流体的搅拌流区域较牛顿流体窄,弹状-搅拌流转变线也明显右移,非牛顿流体的黏性对流型转变的影响较大.     

On flow unsteadiness induced by structural vibration

In this paper, the effects of structural vibration on flow unsteadiness are investigated numerically. A fully coupled model, that solves the unsteady flow equations as well as the dynamic equations of the structure, is used. Numerical experiments are carried-out for flow over a backward-facing step, where a large number of numerical and experimental data exist for comparisons. The flexible structure is upstream of the step and is excited by a plane acoustic wave from the side opposite to the flow. Three Reynolds number cases are studied: 300 for a laminar flow, 3000 for a transitional flow and 15 000 for a turbulent flow. The results obtained are in good agreement with experimental observations and show the strong coupling between structural vibration and the resulting flow unsteadiness.     

矩形腔体流场模拟及噪声研究

用大涡模拟方法对低速湍流引起的矩形腔体内流动进行了模拟,并应用FW-H声学类比方程分析了由流动诱发的气动噪声.数值模拟观察到了涡结构的脱体及腔体内部的自激振荡过程,通过分析得出了由流动诱发噪声的声压-频率曲线.研究发现在流速30 m/s时,流动噪声声压级在60 dB以下,348.48 Hz及其高次谐波是噪声的主要来源,流场与声场表现出耦合关系,辐射声场具有明显的方向性.腔体噪声的风洞实验研究得到了与数值模拟吻合的结果.     

旋转两相流动的计算方法及应用

本文以近年来国内外正在研制的航空气心泵为例,从分析其流动过程出发,建立了气-液两相流动的物理模型和数学模型,采用SIMPLE计算思想进行适当地改进和补充,得到了用于旋转流场两相流动的计算方法和相应的计算程序,并用实验加以验证,结果较为满意。计算和实验的误差<13~19%。这种方法不仅适用于气心泵叶轮流场的计算,也可望能用于其他旋转体系内两相或单相流场的计算。     

激光熔覆中同轴粉末流温度场的数值模拟

在激光同轴送粉熔覆中,由于激光与粉末流相互作用,粉末流整体温度分布直接影响激光熔覆的质量.基于非预混燃烧模型,将激光相处理为连续性介质,粉末颗粒相看作离散相物质,建立了激光作用下粉末流的质量、动量和能量方程.用Fluent软件进行了不同激光功率和粉末流速度条件下粉末流整体温度场数值模拟,讨论了各种参数对温度场分布的影响.为了验证该模型的准确度,利用CCD比色测温方法测量了粉末流整体温度场分布.结果表明,数值模拟与CCD检测结果具有良好的一致性,数值模拟结果对激光熔覆具有指导意义.     

非晶合金中的流变单元

非晶合金是一类具有诸多优异性能的先进金属材料,同时也是研究非晶态物质的模型体系.最近,大量的实验和模拟证据显示,在非晶合金中可能存在类似晶体中缺陷的"流变单元",这些动力学单元和非晶合金的的流变、物理、力学性能密切关联.本文主要综述了流变单元提出的背景、实验证据、流变单元的特征、激活与演化过程、相互作用以及相关的理论.文中提供了大量实验证据证明流变单元模型不仅可以帮助理解非晶态物质中如形变、玻璃转变、弛豫动力学以及非晶结构和性能的关系等重要的基本物理问题,而且可以指导非晶合金性能的调控和设计,获得性能优异的非晶合金材料.     

Flow encoded NMR spectroscopy for quantification of metabolite flow in intact plants

An NMR flow quantification technique applicable to metabolite flow in plants is presented. It combines flow sensitive magnetization preparation with slice selective spectroscopy. Flow encoded NMR spectroscopy is described to quantify, for the first time, flow velocities of metabolites in plants non-invasively. Flow sensitivity is introduced by magnetization preparation based on a stimulated echo experiment, prior to slice selective spectroscopy. For flow quantification eight different flow-weighted spectra are collected. With this flow preparation very slow flow velocities down to 0.1mm/s can be detected and small amounts of flowing metabolites can be observed despite the large background signal of stationary and flowing water. Important sequence optimization steps include appropriate choice of experimental parameters used for flow encoding as well as complete balancing of eddy currents from the flow encoding gradients. The method was validated in phantom experiments and applied in vivo. Examples of quantitative flow measurements of water and metabolites in phantoms and plants are provided to demonstrate the reliability and the performance of flow encoded spectroscopy.     

Quasi-steady model of the acoustic scattering properties of a T-junction

T-junctions are common elements in flow duct networks. It is shown that for low Strouhal numbers, based on the duct diameter, their acoustic scattering properties can be described using an incompressible quasi-steady model. Models are derived for systems subjected to combinations of grazing and bias mean flow, and are shown to work in both the limiting cases—that is, grazing or bias flow alone—as well as for the joining or dividing flow configurations. The upper Strouhal number for which the quasi-steady models are applicable is limited by flow-acoustic interaction effects, which differ significantly between the different flow configurations. Generally the models are applicable up to Strouhal numbers of approximately 0.1-0.2, which is comparable with previous published models for other configurations such as bends and orifices. This range is sufficient to make the model useful in many important engineering applications.     

Eccentricity fluctuations are not the only source of elliptic flow fluctuations in a multiphase transport model

Sources of event-by-event elliptic flow fluctuations in relativistic heavy-ion collisions are investigated in a multiphase parton transport model(AMPT).Besides the well-known initial eccentricity fluctuations,several other sources of elliptic flow dynamical fluctuations are identified.One is fluctuations in initial parton configurations at a given eccentricity.Configuration fluctuations are found to be as important as eccentricity fluctuations in elliptic flow development.A second is quantum fluctuations in parton-parton interactions during system evolution.A third is fluctuations caused by hadronization and final-state hadronic scatterings.The magnitudes of these fluctuations are investigated relative to the eccentricity fluctuations and the average elliptic flow magnitude.The fluctuations from the latter two sources are found to be negative.The results may have important implications for the interpretation of elliptic flow data.     

U型并联多通道中流量分配特性

高增益包层并联多通道流量分配特性直接影响其传热效率,在初始设计中,缺少简洁有效的设计方法。采用Fluent程序对U型布置并联多通道的流量分配特性进行数值模拟,通过敏感性分析,确定了影响流量分配特性的支管长度、支管横截面积、支管个数以及总管横截面积等重要参数,提出了预估流量分配特性的方法。分析表明,无量纲参数Kfd越低,流量分配越均匀；当Kfd低于0.03时,流量丧失比低于5%。