Capillary isotachophoretic determinations of metal ions by use of complexation equilibria in acetone-water medium

The determination of metal ions by capillary isotachophoresis and the complexation equilibria between metal ions and polyaminopolycarboxylic acids has been investigated. A seven-component mixture of metal ions can be separated in 45% v/v acetone-water medium when EDTA or DCTA is used as the terminating ion. Linear calibration graphs are obtained for a standard mixture of Mn(+), Cu(2+), Zn(2+), Cd(2+), Pb(2+) and Fe(3+) in the range 0.5-5.0 nmole, with relative standard deviations of 1.0% or better. The effective mobilities of the Mn(II), Co(II), Ni(II), Cu(II) and Zn(II) complexes increase in parallel with the stability constants, except for the Cu(II) complexes. It is concluded that the abnormal behaviour of the Cu(II) complexes may be attributed to a difference in steric configuration.     

Formation and dissociation kinetics of triaza-crown-alkanoic acid complexes of transition metal(II) and lanthanide (III)

The formation and dissociation rates of some transition metal(II) and lanthanide(III) complexes of the 1,7,13-triaza-4,10,16-trioxacyclooctadecane N',N',N'-triacetic acid (1) and 1,7,13-triaza-4,10,16-trioxacyclooctadecane-N',N',N'- trimethylacetic acid (2) have been measured by the use of stopped-flow and conventional spectrophotometry. Experimental observations were made at 25.0 +/- 0.1 degrees C and at an ionic strength of 0.10 M KCl. The complexation of Zn(2+) and Cu(2+) ions with 1 and 2 proceeds through the formation of an intermediate complex (MH(3)L(+) *) in which the metal ion is incompletely coordinated. This may then lead to a final product in the rate-determining step. Between pH 4.68 and 5.55, the diprotonated (H(2)L(-)) form is revealed to be a kinetically active species despite its low concentration. The stability constants (log K (MH (3)L (+) *)) and specific base-catalyzed rate constants (k(OH)) of intermediate complexes have been determined from the kinetic data. The dissociation reactions of 1 and 2 complexes of Co(2+), Ni(2+), Zn(2+), Ce(3+), Eu(3+) and Yb(3+) were investigated with Cu(2+) ions as a scavenger in acetate buffer. All complexes exhibit acid-independent and acid-catalyzed contributions. The buffer and Cu(2+) concentration dependence on the dissociation rate has also been investigated. The metal and ligand effects on the dissociation rate of some transition metal(II) and lanthanide(III) complexes are discussed in terms of the ionic radius of the metal ions, the side-pendant arms and the rigidity of the ligands.     

Differentiating between fluorescence-quenching metal ions with polyfluorophore sensors built on a DNA backbone

A common problem in detecting metal ions with fluorescentchemosensors is the emission-suppressing effects of fluorescence-quenching metal ions. This quenching tendency makes it difficult to design sensors with turn-on signal, and differentiate between several metal ions that may yield a strong quenching response. To address these challenges, we investigate a new sensor design strategy, incorporating fluorophores and metal ligands as DNA base replacements in DNA-like oligomers, for generating a broader range of responses for quenching metal ions. The modular molecular design enabled rapid synthesis and discovery of sensors from libraries on PEG-polystyrene beads. Using this approach, water-soluble sensors 1-5 were identified as strong responders to a set of eight typically quenching metal ions (Co(2+), Ni(2+), Cu(2+), Hg(2+), Pb(2+), Ag(+), Cr(3+), and Fe(3+)). They were synthesized and characterized for sensing responses in solution. Cross-screening with the full set of metal ions showed that they have a wide variety of responses, including emission enhancements and red- and blue-shifts. The diversity of sensor responses allows as few as two sensors (1 and 2) to be used together to successfully differentiate these eight metals. As a test, a set of unknown metal ion solutions in blind studies were also successfully identified based on the response pattern of the sensors. The modular nature of the sensor design strategy suggests a broadly applicable approach to finding sensors for differentiating many different cations by pattern-based recognition, simply by varying the sequence and composition of ligands and fluorophores on a DNA synthesizer.     

Selective detection of mercury (II) ion using nonlinear optical properties of gold nanoparticles

Contamination of the environment with heavy metal ions has been an important concern throughout the world for decades. Driven by the need to detect trace amounts of mercury in environmental samples, this article demonstrates for the first time that nonlinear optical (NLO) properties of MPA-HCys-PDCA-modified gold nanoparticles can be used for rapid, easy and reliable screening of Hg(II) ions in aqueous solution, with high sensitivity (5 ppb) and selectivity over competing analytes. The hyper Rayleigh scattering (HRS) intensity increases 10 times after the addition of 20 ppm Hg(2+) ions to modified gold nanoparticle solution. The mechanism for HRS intensity change has been discussed in detail using particle size-dependent NLO properties as well as a two-state model. Our results show that the HRS assay for monitoring Hg(II) ions using MPA-HCys-PDCA-modified gold nanoparticles has excellent selectivity over alkali, alkaline earth (Li(+), Na(+), K(+), Mg(2+), Ca(2+)), and transition heavy metal ions (Pb(2+), Pb(+), Mn(2+), Fe(2+), Cu(2+), Ni(2+), Zn(2+), Cd(2+)).     

Formation and composition of the precipitates of various metal 8-selenoquinoline complexes

The effect of acidity on the precipitation of various bivalent metal 8-selenoquinoline and 8-mercaptoquinoline complexes has been systematically studied and compared. The metal ions were Zn(2+), Cd(2+), Pb(2+), Mn2+, Ni(2+), Cu(2+) and Co(2+). Most of the metal ions, except copper(II) and cobalt(II), precipitate as a. 1:2 complex, metal :ligand. However, in hydrochloric acid solution cadmium precipitates as CdR(2).2HCl and lead as PbR(2).2HCl or PbR.Cl. Copper(II) is reduced to copper(I) and precipitates as CuR.RH at pH above 2.0 and as CuR in strongly acidic solution. Cobalt(II) does not give a precipitate of composition but appears to precipitate as a mixture of CoR(2).RH and fixed CoR(2) or as other complexes. The reasons for the formation of the various types of precipitate are considered.     

A gold nanorod based colorimetric probe for the rapid and selective detection of Cu2+ ions

A gold nanorod (AuNR) based colorimetric probe was reported for the rapid and selective detection of Cu(2+) ions. The probe was fabricated by functionalizing cysteine (Cys) onto AuNR (Cys-AuNR) with an aspect ratio of 2.3. The strong coordination of Cu(2+) with cysteine resulted in a stable Cys-Cu-Cys complex, and induced the aggregation of the colloidal nanorods along with a rapid colour change from blue-green to dark gray. Potential factors affecting the performance of the probe for the detection of Cu(2+) were carefully optimized, including the pH value of the buffer media, the concentration of cysteine, and the kinetics for the coordination of Cu(2+) with Cys-AuNR. Under optimal conditions, the developed colorimetric method gave a linear range of 1-100 μM for Cu(2+), and a detection limit (3s) of 0.34 μM. Moreover, the developed method exhibited excellent selectivity for Cu(2+), and quantitative spike-recoveries from 90% to 107% in environmental water samples. The proposed colorimetric approach can in principle be used to detect other metal ions by functionalizing various specific ligands onto the AuNR that can selectively bind the other target metal ions.     

Functionalized gold nanoparticles as phosphorescent nanomaterials and sensors

Ligand-capped gold nanoparticles were synthesized by capping monothiol derivatives of 2,2'-dipyridyl onto the surface of Au nanoparticles (Au-BT). The average size of the metal core is around 4 nm, with a shell of approximately 340 bipyridine ligands around the Au nanoparticle. The high local concentration of the chelating ligands ( approximately 5 M) around the Au nanoparticle makes these particles excellent ion sponges, and their complexation with Eu(III)/Tb(III) ions yields phosphorescent nanomaterials. Absorption spectral studies confirm a 1:3 complexation between Eu(III)/Tb(III) ions and bipyridines, functionalized on the surface of Au nanoparticles. The red-emitting Au-BT:Eu(III) complex exhibits a long lifetime of 0.36 ms with six line-like emission peaks, whereas the green-emitting Au-BT:Tb(III) complex exhibits a lifetime of 0.7 ms with four line-like emission peaks. These phosphorescent nanomaterials, designed by linking BT:Eu(III) complexes to Au nanoparticles, were further utilized as sensors for metal cations. A dramatic decrease in the luminescence was observed upon addition of alkaline earth metal ions (Ca(2+), Mg(2+)) and transition metal ions (Cu(2+), Zn(2+), Ni(2+)), resulting from an isomorphous substitution of Eu(III) ions, whereas the luminescence intensity was not influenced by the addition of Na(+) and K(+) ions. Direct interaction of bipyridine-capped Au nanoparticles with Cu(2+) ions brings the nanohybrid systems closer, leading to the formation of three-dimensional superstructures. Strong interparticle plasmon interactions were observed in these closely spaced Au nanoparticles.     

Coordination networks from a bifunctional molecule containing carboxyl and thioether groups

The bifunctional molecule tetrakis(methylthio)-1,4-benzenedicarboxylic acid (TMBD) interacts with the increasingly harder metal ions of Cu (I), Cd (II), and Zn (II) to form the coordination networks of Cu 2TMBD, CdTMBD, and Zn 4O(H 2O) 3(TMBD) 3, where the carboxyl group consistently bonds to metal ions, while the softer methylthio group binds with preference to the softer metal ions (i.e., chelation to Cu (+), single-fold coordination to Cd (2+), and nonbonding to Zn (2+)). Diffuse-reflectance spectra show that the metal-thioether interaction is associated with smaller electronic band gaps of the solid-state networks.     

Nature of metal binding sites in Cu(II) complexes with histidine and related N-coordinating ligands, as studied by EXAFS

Knowledge of the complexes formed by N-coordinating ligands and Cu(II) ions is of relevance in understanding the interactions of this ion with biomolecules. Within this framework, we investigated Cu(II) complexation with mono- and polydentate ligands, such as ammonia, ethylenediamine (en), and phthalocyanine (Pc). The obtained Cu-N coordination distances were 2.02 A for [Cu(NH(3))(4)](2+), 2.01 A for [Cu(en)(2)](2+), and 1.95 A for CuPc. The shorter bond distance found for CuPc is attributed to the macrocyclic effect. In addition to the structure of the first shell, information on higher coordination shells of the chelate ligands could be extracted by EXAFS, thus allowing discrimination among the different coordination modes. This was possible due to the geometry of the complexes, where the absorbing Cu atoms are coplanar with the four N atoms forming the first coordination shell of the complex. For this reason multiple scattering contributions become relevant, thus allowing determination of higher shells. This knowledge has been used to gain information about the structure of the 1:2 complexes formed by Cu(II) ions with the amino acids histidine and glycine, both showing a high affinity for Cu(II) ions. The in-solution structure of these complexes, particularly that with histidine, is not clear yet, probably due to the various possible coordination modes. In this case the square-planar arrangements glycine-histamine and histamine-histamine as well as tetrahedral coordination modes have been considered. The obtained first-shell Cu-N coordination distance for this complex is 1.99 A. The results of the higher shells EXAFS analysis point to the fact that the predominant coordination mode is the so-called histamine-histamine one in which both histidine molecules coordinate Cu(II) cations through N atoms from the amino group and from the imidazole ring.     

Effects of transition metal ion coordination on the collision-induced dissociation of polyalanines

Transition metal-polyalanine complexes were analyzed in a high-capacity quadrupole ion trap after electrospray ionization. Polyalanines have no polar amino acid side chains to coordinate metal ions, thus allowing the effects metal ion interaction with the peptide backbone to be explored. Positive mode mass spectra produced from peptides mixed with salts of the first row transition metals Cr(III), Fe(II), Fe(III), Co(II), Ni(II), Cu(I), and Cu(II) yield singly and doubly charged metallated ions. These precursor ions undergo collision-induced dissociation (CID) to give almost exclusively metallated N-terminal product ions whose types and relative abundances depend on the identity of the transition metal. For example, Cr(III)-cationized peptides yield CID spectra that are complex and have several neutral losses, whereas Fe(III)-cationized peptides dissociate to give intense non-metallated products. The addition of Cu(II) shows the most promise for sequencing. Spectra obtained from the CID of singly and doubly charged Cu-heptaalanine ions, [M + Cu - H](+) and [M + Cu](2+) , are complimentary and together provide cleavage at every residue and no neutral losses. (This contrasts with [M + H](+) of heptaalanine, where CID does not provide backbone ions to sequence the first three residues.) Transition metal cationization produces abundant metallated a-ions by CID, unlike protonated peptides that produce primarily b- and y-ions. The prominence of metallated a-ions is interesting because they do not always form from b-ions. Tandem mass spectrometry on metallated (Met = metal) a- and b-ions indicate that [b(n) + Met - H](2+) lose CO to form [a(n) + Met - H](2+), mimicking protonated structures. In contrast, [a(n) + Met - H](2+) eliminate an amino acid residue to form [a(n-1) + Met - H](2+), which may be useful in sequencing.     

Metallomicellar Catalysis Hydrolysis of p-Nitrophenyl Picolinate Catalyzed by Copper(II), Nickel(II), and Zinc(II) Complexes of Long Alkyl Pyridine Ligands in Micellar Solution

The ternary complex kinetic model for metallomicellar catalysis has been proposed in this paper. The catalytic effects of bivalent metal ion (Cu(2+), Zn(2+), and Ni(2+)) complexes of long alkyl pyridine ligands upon the hydrolysis of p-nitrophenyl picolinate (PNPP) have been studied kinetically in aqueous buffer of pH ranging from 5.0 to 8.5 at 30 degrees C. The effect of pH on the reactivity is discussed. The results indicate that the metallomicelles formed by pyridine ligands promote the hydrolysis of PNPP, and the order is Cu(II) system>Ni(II) system>Zn(II) system. A stereochemical modification of the complex in the CTAB micelle is suggested as a likely explanation for the observed phenomena. Copyright 2000 Academic Press.     

Serendipity and design in the generation of new coordination polymers: an extensive series of highly symmetrical guanidinium-templated, carbonate-based networks with the sodalite topology

The serendipitous discovery of a 3D [Cu(CO(3))(2)(2-)](n) network with the topology of the 4(2)6(4) sodalite net in [Cu(6)(CO(3))(12)(CH(6)N(3))(8)].K(4).8H(2)O paved the way for the deliberate engineering of an extensive series of structurally related guanidinium-templated metal carbonates of composition [M(6)(CO(3))(12)(CH(6)N(3))(8)]Na(3-)[N(CH(3))(4)].xH(2)O, where the divalent metal M in the framework may be Mg, Mn, Fe, Co, Ni, Cu, Zn, or Cd. A closely related crystalline material with a [Ca(CO(3))(2)(2-)](n) sodalite-like framework, but containing K(+) rather than Na(+), of composition [Ca(6)(CO(3))(12)(CH(6)N(3))(8)]K(3)[N(CH(3))(4)].3H(2)O was also isolated. All of these compounds were obtained under the simplest possible conditions from aqueous solution at room temperature, and their structures were determined by single-crystal X-ray diffraction. Pairs of guanidinium cations are associated with the hexagonal windows of the sodalite cages, alkali-metal cations are associated with their square windows, and N(CH(3))(4)(+) ions are located at their centers. Structures fall into two classes depending on the metal, M(II), in the framework. One type, the BC type (Im3m), comprising the compounds for which M(2+) = Ca(2+), Mn(2+), Cu(2+), and Cd(2+), has a body-centered cubic unit cell, while the second type, the FC type (Fd3c), for which M(2+) = Mg(2+), Fe(2+), Co(2+), Ni(2+), and Zn(2+), has a face-centered cubic unit cell with edges on the order of twice those of the BC structural type. The metal M in the BC structures has four close carbonate oxygen donors and four other more distant ones, while M in the FC structures has an octahedral environment consisting of two bidentate chelating carbonate ligands and two cis monodentate carbonate ligands.     

Exploring the emissive properties of new azacrown compounds bearing aryl, furyl, or thienyl moieties: a special case of chelation enhancement of fluorescence upon interaction with Ca(2+), Cu(2+), or Ni(2+)

Three new compounds bearing furyl, aryl, or thienyl moieties linked to an imidazo-crown ether system (1, 2, and 3) were synthesized and fully characterized by elemental analysis, infrared, UV-vis absorption, and emission spectroscopy, X-ray crystal diffraction, and MALDI-TOF-MS spectrometry. The interaction toward metal ions (Ca(2+), Cu(2+), Ni(2+), and Hg(2+)) and F(-) has been explored in solution by absorption and fluorescence spectroscopy. Mononuclear and binuclear metal complexes using Cu(2+) or Hg(2+) as metal centers have been synthesized and characterized. Compounds 2 and 3 show a noticeable enhancement of the fluorescence intensity in the presence of Ca(2+) and Cu(2+) ions. Moreover compound 3 presents a dual sensory detection way by modification of the fluorimetric and colorimetric properties in the presence of Cu(2+) or Hg(2+). EPR studies in frozen solution and in microcrystalline state of the dinuclear Cu(II)3 complex revealed the presence of an unique Cu(2+) type.     

Synthesis of ditopic ligands for the selective extraction of copper(II) nitrate and crystal structures of their Cu(II) complexes

We have synthesized two ditopic ligands for selective extraction of copper(II) nitrate. We also synthesized one cation-only binding analog for comparison. All three ligands were characterized by conventional techniques. Competitive two-phase metal ion solvent extraction experiments were performed at 25 °C over a period of 24 h. These ligands showed significant selectivity for Cu(II) ions, having the ditopic ligands extract 81 and 73% of the Cu(II) ions in a solution of different metal ions {Ni(II), Co(II), Cu(II), Zn(II), Cd(II), Pb(II)} at pH 5.09. Competitive transport experiments (water/chloroform/water) were undertaken employing each ligand separately as the ionophore in the membrane (chloroform) phase. No metal ion transport was observed, but a large concentration of Cu(II) was present in the membrane phase. Competitive anion extraction and transport were carried out with the ditopic ligands, yielding selective extraction and transport of nitrate. Furthermore, a pH isotherm of the best ditopic ligand (H₂L²) with Cu(II) was determined from pH 1.0 to 6.0, producing a pH_½ value of approximately 2.6. Finally, crystal structures of the ditopic ligands complexed with Cu(II) were determined and refined. The coordination geometry around the metal centers are distorted square planar and the Cu(II)-donor bond lengths fall within the normal range.     

Bi-1,10-phenanthrolines and their mononuclear Ru(II) complexes

A series of four biphen (phen = 1,10-phenanthroline) ligands, 2,2'-biphen (1), 3,3'-biphen (2), 2,2'-dimethylene-3,3'-biphen (3), and 2,3'-dimethylene-3,2'-biphen (4), is prepared by coupling and Friedl?nder methodology. The corresponding mononuclear Ru(II) complexes, [Ru(1-4)(Mebpy)(2)](2+) where Mebpy = 4,4'-dimethyl-2,2'-bipyridine, are prepared. These complexes show long wavelength electronic absorptions at 441-452 nm and emissions at 622-641 nm. Metal-based oxidations occur in the range 1.18-1.21 V, and ligand-based reductions, at -1.20 to -1.30 V. The addition of Zn(2+), Cd(2+), or Hg(2+) ions results in a strong enhancement and red shift of the luminescence of complex Ru-3. Alkali and alkaline earth metal ions barely affect the luminescence of Ru-3 while transition metal ions such as Co(2+), Cu(2+), Ni(2+), and Mn(2+) lead to efficient quenching of the Ru-3 luminescence. The luminescence of Ru-2 and Ru-4 is quenched in the presence of Zn(2+) because of a conformationally induced reduction in electronic communication between the two phen halves of the ligand. The addition of Zn(2+) has only a slight effect on the luminescence of Ru-1 because of steric hindrance toward complexation.     

EFFECT OF THE DEGREE OF DVB CROSSLINKING ON THE METAL ION SPECIFICITY OF POLYACRYLAMIDE-SUPPORTED GLYCINES

Metal ion specificity studies of divinylbenzene (DVB)-crosslinked polyacrylamide-supported glycines in different structural environments were investigated. The effect of the degree of crosslinking on the specific rebinding of the desorbed metal ion was investigated towards Co(II), Ni(II), Cu(II), and Zn(II) ions. The metal ion-desorbed resins showed specificity for the desorbed metal ion and the specificity characteristics increases with an increasing degree of the crosslinking agent. The polymeric ligands and metal complexes were characterized by IR, UV-visible and EPR spectra, and by SEM analysis. The swelling and solvation characteristics of the crosslinked polymers, polymeric ligands and metal complexes, the effect of the pH dependence on metal ion binding and rebinding and the kinetics of metal ion binding and rebinding were also followed. The complexation resulted in the downfield shift of the carboxylate peak in the IR spectra. The EPR parameters are in agreement with a distorted tetragonal geometry. The Cu(II) ion-desorbed resins selectively rebinds Cu(II) ions from a mixture of Cu(II) and Co(II) and Cu(II) and Ni(II) ions. The resin could be regenerated several times without loss of capacity and effective for the specific and selective rebinding of Cu(II) ions.     

Ligand Reprogramming in Dinuclear Helicate Complexes: A Consequence of Allosteric or Electrostatic Effects?

The ditopic ligand 6,6'-bis(4-methylthiazol-2-yl)-3,3'-([18]crown-6)-2,2'-bipyridine (L(1)) contains both a potentially tetradentate pyridyl-thiazole (py-tz) N-donor chain and an additional "external" crown ether binding site which spans the central 2,2'-bipyridine unit. In polar solvents (MeCN, MeNO(2)) this ligand forms complexes with Zn(II), Cd(II), Hg(II) and Cu(I) ions via coordination of the N donors to the metal ion. Reaction with both Hg(II) and Cu(I) ions results in the self-assembly of dinuclear double-stranded helicate complexes. The ligands are partitioned by rotation about the central py--py bond, such that each can coordinate to both metals as a bis-bidentate donor ligand. With Zn(II) ions a single-stranded mononuclear species is formed in which one ligand coordinates the metal ion in a planar tetradentate fashion. Reaction with Cd(II) ions gives rise to an equilibrium between both the dinuclear double-stranded helicate and the mononuclear species. These complexes can further coordinate s-block metal cations via the remote crown ether O-donor domains; a consequence of which are some remarkable changes in the binding modes of the N-donor domains. Reaction of the Hg(II)- or Cd(II)-containing helicate with either Ba(2+) or Sr(2+) ions effectively reprogrammes the ligand to form only the single-stranded heterobinuclear complexes [MM'(L(1))](4+) (M=Hg(II), Cd(II); M'=Ba(2+), Sr(2+)), where the transition and s-block cations reside in the N- and O-donor sites, respectively. In contrast, the same ions have only a minor structural impact on the Zn(II) species, which already exists as a single-stranded mononuclear complex. Similar reactions with the Cd(II) system result in a shift in equilibrium towards the single-stranded species, the extent of which depends on the size and charge of the s-block cation in question. Reaction of the dicopper(I) double-stranded helicate with Ba(2+) shows that the dinuclear structure still remains intact but the pitch length is significantly increased.     

Investigation on C2-ceramide complexes with transition metal ions using electrospray ionization tandem mass spectrometry

Electrospray ionization-tandem mass spectrometry (ESI-MS/MS) is applied for the investigation of C(2)-ceramide complexes with transition metal ions. Ceramide plays an important role in the regulation of various signaling pathways leading to proliferation, differentiation or apoptotic cell death. The formation and fragmentation of doubly charged cluster ions as well as singly charged cluster ions of C(2)-ceramide with transition metal ions (Mn(2+), Fe(2+), Co(2+) and Ni(2+)) are studied by ESI-MS/MS in the positive mode. Tube lens offset voltage and concentrations of C(2)-ceramide and transition metals are optimized to determine the best conditions for generating doubly charged cluster ions. The fragmentation pathways of metal ion complexes with C(2)-ceramide and the compositions of these complexes are determined by collision induced dissociation (CID). All transition metal ions (Mn(2+), Fe(2+), Co(2+) and Ni(2+) except Cu(2+)) shows similar complexation with C(2) ceramide. The unique complexation behavior of copper(II) is responsible for the different geometry of the complexes and relatively lower affinity of ceramide to copper(II) than those to other transition metals.     

Symposium on Biomedical Polymers

ABSTRACT

Glycine functions were incorporated into 2–20 mol% N,N′-methylene-bis-acrylamide (NNMBA)-crosslinked polyacrylamides by transamidation with excess sodium salt of glycine. Complexation characteristics of glycine functions in different structural environments were investigated towards Co(II), Ni(II), Cu(II) and Zn(II) ions. The observed trend in complexation was found to be: Cu(II) > Ni(II) > Co(II) > Zn(II). The polymeric ligands and metal complexes were characterized by various spectral techniques. The polymeric ligands could be recycled several times and the metal ion desorbed resins showed specificity to the desorbed metal ion than other metal ions. This originates from the development of certain ‘pockets’ left by the desorbed metal ion or the ‘memory’ of the polymeric ligands for the desorbed metal ion. This lightly crosslinked systems showed much faster rebinding kinetics. The conditions of metal ion binding and rebinding were optimized to exploit the specific and selective separation of metal ions using metal ion desorbed systems. The specificity and selectivity characteristics depend on the degree of NNMBA crosslinking.     

Synthesis and structural characterization of a novel mixed-valent Cu(II)Cu(I)Cu(II) triangular metallomacrocycle using an imine-based rigid ligand

A novel neutral mixed-valent Cu(I)Cu(II)(2) triangular metallomacrocycle [Cu(3)L(2)(HL)].3CH(3)OH.2H(2)O (1) was assembled by reaction of the tetradentate ligand bis(N-salicylidene-4,4'-diphenylamine), H(2)L, with a copper(II) salt. ESI-MS show peaks only corresponding to the triangular structural species, indicating the high stability of the trimer structure in solution. Magnetic study confirms that there are two Cu(II) ions and one Cu(I) ion in a discrete triangular molecule. The crystal structure of 1 reveals that the triangle is formed by three deprotonated ligands and three copper ions with a Cu-Cu separation of ca. 11.8 A. Each copper atom is coordinated by two oxygen atoms and two nitrogen atoms from two different bis-bidentate ligands in a heavily distorted tetrahedral geometry, while each ligand is bound to two metal ions in a bis-bidentate coordination mode and links the metal centers overlapping in an unprogressive manner. Strong intramolecular pi.pi interactions between the ligands are found to stabilize the constraint conformation of the triangle. Electrochemical study reveals that the mixed-valent Cu(I)Cu(II)(2) complex is the most stable state in solution condition, and the electrochemical communication between the copper ions might be explained on the basis of the through-bond interaction. UV-vis-NIR spectral measurement demonstrates the Robin-Day class II behavior of the mixed-valence compound with a weak copper-copper interaction.