Summary: A novel functionalised poly(1‐vinylpyrrolidin‐2‐one) (PVP) derivative, carrying a pre‐determined amount of 2‐(2‐pyridinyldithio)ethylamine moieties as side substituents, P(VP‐co‐VP‐SS‐Py), has been prepared from carboxylated VP copolymers, in turn obtained by copolymerising 1‐vinylpyrrolidin‐2‐one with 3,3‐di‐(ethoxycarbonyl)‐1‐vinylpyrrolidin‐2‐one in the presence of radical initiators. Using reaction solvents acting in the mean time as chain transfer agents could control its molecular weight. P(VP‐co‐VP‐SS‐Py) proved to be extremely reactive towards exchange reactions with molecules containing mercapto functions, including bioactive peptides. The exchange derivative with reduced glutathione, chosen as a model compound, was easily prepared.
Summary: The vapor‐based synthesis and characterization of a reactive polymer, poly[(4‐formyl‐p‐xylylene)‐co‐(p‐xylylene)] ( 1 ), have been reported. The reactive polymer coating enables the immobilization of oligosaccharides via the chemoselective aldehyde‐hydrazide coupling reaction.
We report the synthesis of a series of block copolymers consisting of a rod‐like semiconducting poly(2,5‐di(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene) (DEH‐PPV) block and a flexible poly(lactic acid) (PLA) block that can be selectively degraded under mild conditions. Such selectively degradable block copolymers are designed as self‐assembling templates for bulk heterojunction donor–acceptor layers in organic solar cells. A lamellar microphase‐separated domain structure was identified for block copolymers with PLA volume fractions between 29 and 79% in bulk and thin films using SAXS, TEM, and AFM. Depending on the ratio of the two blocks we find either lamellae oriented parallel or perpendicular to the substrate in thin films.
Summary: PE‐block‐PS and P(E‐co‐P)‐block‐PS block copolymers were synthesised via sequential monomer addition during homogeneous polymerisation on various phenoxyimine catalysts. One phenoxyimine catalyst was tailored to produce high molecular weight block copolymers containing both, polyolefin and polystyrene segments. According to chromatographic analysis and TEM morphology studies, blends of block copolymers and PE homopolymers [or P(E‐co‐P), respectively] were formed. The direct olefin/styrene block copolymer synthesis on phenoxyimine catalysts represents an attractive, new one‐pot route to styrenic block copolymers which are commercially prepared by anionic styrene/diene block copolymerisation followed by hydrogenation.
Summary: Due to a large difference in storage modulus below and above the glass transition temperature, a novel shape‐memory poly[(methyl methacrylate)‐co‐(N‐vinyl‐2‐pyrrolidone)]/poly(ethylene glycol) semi‐interpenetrating polymer networks structure was synthesized, which is stabilized by hydrogen‐bonding interactions. The recovery ratio of these polymers could reach 99%. In such a system the maximum molecular weight of PEG required for the semi‐IPNs formation reaches 1 000.
Transition from the temporary shape (chem) to the permanent shape (four rods) for a shape‐memory P(MMA‐co‐VP)/PEG1000 semi‐IPNs. 相似文献
The synthesis of P(VA‐co‐VAc)‐graft‐PDMS copolymers has been achieved in microsuspension by direct reaction between an epoxy‐terminated PDMS and some pendant alcohol groups in P(VA‐co‐VAc). In this synthesis, the copolymer is used both as dispersant and reactant. The hydrophilic/hydrophobic character of the final material can be varied at will by incorporating various contents of epoxy‐functionalized PDMS through optimized reaction conditions. The final composition was determined by TGA and 1H NMR. Products prepared from monofunctional PDMS were easily redispersed in water whereas a film of crosslinked materials, arising from difunctional PDMS, showed the best waterproofing as shown by contact angle analysis.
Summary: Thermosensitive polymer nanotubes can be fabricated within an aminopropylsilane‐modified porous anodic aluminum oxide membrane by surface‐initiated atom transfer radical polymerization (ATRP) followed by template removal. DSC experiments prove that the synthesized PNIPAM‐co‐MBAA copolymer nanotubes have a reversible thermosensitive behavior. The temperature‐induced changes in dimension and shape of the nanotubes were studied by AFM in real time in an aqueous environment. It indicates that the nanotubes undergo a shape alteration from an “ellipse” to “circular” shape in water upon heating to LCST or above.
A series of novel pH‐ and temperature‐responsive diblock copolymers composed of poly(N‐isopropylacrylamide) (PNIPAM) and poly[(L ‐glutamic acid)‐co‐(γ‐benzyl L ‐glutamate)] [P(GA‐co‐BLG)] were prepared. The influence of hydrophobic benzyl groups on the phase transition of the copolymers was studied for the first time. With increasing BLG content in P(GA‐co‐BLG) block, the thermal phase transition of the diblock copolymer became sharper at a designated pH and the critical curve of phase diagram of the diblock copolymer shifted to a higher pH region. Notably, when the BLG content in P(GA‐co‐BLG) block was more than 30 mol.‐%, the diblock copolymer responded sharply to a narrow pH change in the region of pH 7.4–5.5.
In polystyrene‐block‐poly(ethylene oxide) thin films, microphase‐separated brushes on the square platelets can be obtained via fast solvent evaporation by controlling the tethering density (0.08 < σ < 0.11). The tethering density of the brushes is proportional to the thickness of the PEO crystal and increases with increasing initial solution heating temperature (Ti). When Ti < Tm, where Tm is the melting point of PEO, brushes with microphase‐separated structures are observed. The formation of microphase‐separated brushes depends on two factors: the strong incompatibility between PS and noncrystalline PEO chains (attached to the crystalline PEO) and the weak interaction between PS‐PS brushes.
This review article describes the preparation of polymer brushes by nitroxide‐mediated radical polymerization using either the ‘grafting to’ or the ‘grafting from’ approach. The use of TEMPO as a classical initiator is intensively described. More sophisticated nitroxides are also included in the discussion. Brush formation on flat surfaces such as wafers and also on particles is reported. Finally, some applications of polymer brushes are presented.
A ductile‐to‐semiductile transition in the crack resistance behaviour of PP/MWNT composites is discussed, using an essential work of fracture approach based on a post yield fracture mechanics concept and its possible interrelation to the structural attributes studied by TEM, SEM, and WAXD. A maximum in the non‐essential work of fracture is observed at 0.5 wt.‐% MWNT content, which demonstrates the enhanced resistance to crack propagation compared to pure PP, followed by a sharp decline with the increase in MWNT content to 1.5 wt.‐%, which reveals a ductile‐to‐semiductile transition. Fracture kinetic studies present a qualitative picture of the nature of such a transition in terms of a) switch over from non‐steady (in pure PP) to steady‐state crack tip opening displacement rate (in nanocomposites), and b) a ductile‐to‐semiductile transition; largely as a result of delayed‐yielding of the nanocomposites.
A macroporous material composed of closely aggregated particles was prepared by cryo‐structuration of N‐isopropylacrylamide‐co‐N‐hydroxymethylacrylamide (NIPA‐co‐HMAm) particle suspensions. The formed structure was maintained by the formation of covalent bonds through self‐crosslinking between the particles while the system was in a semi‐frozen state thus avoiding the need to freeze‐dry the sample. This resulted in macroporous structure composed of closely aggregated thermoresponsive particles which exhibit an ultrafast temperature response. The response rate can be attributed both to the macroporous structure as well as the fast responsive properties of the individual particles.
The computer‐aided design of polymers is one of the holy grails of modern chemical informatics and of significant interest for a number of communities in polymer science. This paper outlines a vision for the in silico design of polymers and presents an information model based on modern semantic web technologies, thus laying the foundations for achieving the vision.
Readily water‐soluble PEGylated amphiphiles containing bis‐thiourea‐based molecular recognition units at the interface of hydrophobic and hydrophilic blocks are developed. Self‐assembly of these amphiphiles is found to be dependent on the exact chemical composition of the hydrophobic component. Elongated, spherical, and disk‐like micelles are formed with the change in hydrophobic group from stearyl (2A), oleyl (2B), and dodecanol (2C), respectively. The length of the rod‐like elongated micelles formed by 2A could be tuned by thermal treatment as well. Synthesis and detailed structural characterization of these amphiphiles by TEM, DSC, synchrotron SAXS techniques are reported. Organic solvent‐free direct aqueous encapsulation of doxorubicin, an anticancer drug into these nanostructures is demonstrated.
Summary: The phase behavior of poly(ethylene‐co‐styrene) (PES) and poly(ethylene‐co‐butene) (PEB) blends has been studied. A closed‐loop phase diagram was clearly observed in this weakly interacting system as the styrene content in the PES decreased to about 1 mol‐%. At higher styrene contents, the phase loop starts to interplay with the crystallization transformation at lower temperatures.
Phase diagram of PEB/PES blends. Phase boundary line is only for easy demonstration. 相似文献
Polystyrene microfibers containing lower‐rim substituted calix[4]arene with phosphinoyl pendant arms were easily prepared in one‐step procedure by electrospinning. A specific feature of the fibers is the difference in their functionality at the surface and in the bulk. The graded structure of the fibers was shown by XPS analyses. The calix[4]arene concentration in the 3–5 nm surface layer was 50% higher than the theoretically calculated if calix[4]arene was uniformly distributed in the fibers. A six‐coordinated complex was formed between the calix[4]arene included in the fibers and Ni2+ ions. The distribution of phosphorus along the fibers is uniform, as evidenced by X‐ray mapping.
Acrylamide and acrylic acid are grafted on graphene by free‐radical polymerization to produce a series of graphene–poly(acrylamide‐co‐acrylic acid) hybrid materials with different contents of graphene. The materials demonstrate shape memory effect and self‐healing ability when the content of graphene is in the range of 10%–30% even though poly(acrylamide‐co‐acrylic acid) itself had poor shape memory ability. The permanent shape of the materials can be recovered well after 20 cycles of cut and self‐healing. The result is attributed to the hard–soft design that can combine nonreversible “cross‐link” by grafting copolymer on graphene and reversible “cross‐link” utilizing the “zipper effect” of poly(acrylamide‐co‐acrylic acid) to form or dissociate the hydrogen‐bond network stimulated by external heating.
The dual self‐assembling polycondensation of p‐acetoxybenzoic acid (ABA) and p‐acetamidobenzoic acid in Therm S 800 was examined at 300 °C. Needle‐like crystals and lath‐like crystals were formed simultaneously through reaction‐induced crystallization of oligomers at a molar ratio of 30–50 mol‐% ABA in the feed. The needle‐like crystals comprised more p‐oxybenzoyl units, whereas the lath‐like ones contained higher amounts of p‐benzamide moieties.
The article discusses the development and properties of supramolecular polymers based on quadruple hydrogen bonds between self‐complementary ureidotriazine (UTr) and ureidopyrimidinone (UPy) functional groups. The high association constant with which these groups dimerize leads to polymers with a high degree of polymerization in isotropic solution. Application of these units for the functionalization of telechelic polymers results in new materials with mechanical properties approaching those of covalent polymers, but with a much stronger temperature‐dependent behavior. Solvophobic interactions between the hydrogen bonding moieties may be used to obtain supramolecular polymers with a well defined helical columnar architecture. Another consequence of the high dimerization constant of the UPy group is the phenomenon of a critical concentration in solutions of many bifunctional monomers. Below this concentration, only cycles are present, while above the critical concentration, the amount of cycles remains constant, and a polymer is formed. Conformational properties of the linker units are used to control the equilibrium between polymers and cycles, and are proposed to form a promising strategy toward tunable materials.
Summary: Diblock terpolymers that consist of homopolymer and statistical copolymer (polyampholyte) building blocks are synthesized by group transfer polymerization. Two types of block tepolymers are explored in aqueous media: the amphiphilic poly{[(diethylamino)ethyl methacrylate]‐co‐(methacrylic acid)}‐block‐poly(methyl methacrylate) and the double hydrophilic poly[oligo(ethylene glycol) methacrylate]‐block‐poly{[(diethylamino)ethyl methacrylate]‐co‐(methacrylic acid)}. The first terpolymer self‐assembles in aqueous media to form responsive micelles that change their corona charge sign upon switching pH. The second terpolymer exhibits a multi‐responsive behavior. It forms neutral, positive, or negative micelles depending on a combination of different environmental conditions such as temperature, pH, and ionic strength.
