Synthesis and Characterization of Thermally Curable Benzoxazine‐Functionalized Polystyrene Macromonomers

Summary: Thermally curable benzoxazine ring‐containing polystyrene macromonomers were synthesized and characterized. 1,4‐Dibromo‐2,5‐bis(bromomethyl)benzene and 1,4‐dibromo‐2‐(bromomethyl)benzene were used as initiators in the atom transfer radical polymerization of styrene. The resulting polymers were used in combination with 3‐aminophenylboronic acid hemisulfate, for a Suzuki coupling. The obtained polymers, with amino groups in the middle or end of the chains, were reacted with formaldehyde and phenol to yield benzoxazine ring‐containing macromonomers. In addition to the glass transition temperature of the polystyrene segment observed at ca. 105 °C, differential scanning calorimetry thermograms exhibit an exotherm at ca. 276 °C corresponding to the oxazine thermal polymerization. Both macromonomers undergo thermal curing with the formation of thermosets having polystyrene segments.

Structure of the benzoxazine‐functionalized polystyrene.     

Complexation of Syndiotactic Polystyrene with 12‐Crown‐4

Solid‐state complexation of syndiotactic polystyrene (sPS) with a crown ether compound, 1,4,7,10‐tetraoxa‐cyclododecane (12‐crown‐4), took place when a film of sPS/chloroform clathrate was subjected to a guest exchange procedure assisted with a plasticizing agent. The new guest 12‐crown‐4 molecules were incorporated into the crystalline region of the sPS film, without causing a large conformational change of host sPS helices. X‐ray diffraction and thermogravimetric investigations showed that sPS/12‐crown‐4 complex had a clathrate complex structure which contained four 12‐crown‐4 molecules per unit cell. IR and Raman data suggested that 12‐crown‐4 took a C_i‐type conformation in the sPS complex phase.

     

Construction of Large‐Scale Highly Ordered Macroporous Monoliths of π‐Conjugated Polymers

Large scale of well‐ordered macroporous π‐conjugated polymer monoliths have been successfully prepared through a new approach using micrometer‐sized naphthalene crystals as templates. The macroporous monoliths of poly(p‐phenylenevinylene) (PPV) and poly(p‐phenyleneethynylene) (PPE) grew along the unidirectional freezing direction inside the template naphthalene crystals which lead to the formation of controlling morphologies and homogeneous diameters. The polymer monoliths show straight and lamella macroporous structures. The diameters of pores and the thickness of pore walls can be controlled by tuning the freezing temperature.

     

Oriented Synthesis of One‐Dimensional Polypyrrole Molecule Chains in a Metal‐Organic Framework

We report for the first time the preparation of single polypyrrole (PPy) molecule chains using a “metal‐organic framework” with 1 nm channels as a template. The obtained one‐dimensional (1‐D) PPy has highly structure order and excellent conductivity, which has improved by as much as five orders of magnitude in comparison with that of 2‐D PPy.

     

Cationic Salt‐Responsive Bottle‐Brush Polymers

A class of cationic bottle‐brush polymers that show ionic strength‐dependent stimuli responsiveness is prepared. Brush polymers with norbornene as backbone and quaternary ammonium (QA)‐containing polycaprolactone copolymers as side chains are synthesized by a combination of ring‐opening metathesis polymerization, ring‐opening polymerization, and click reaction. In water with low ionic strength, brush polymers are soluble due to the strong electrostatic repulsion between cationic QA groups. As the addition of salt to increase ionic strength, single brush polymers undergo a transition from extended conformation to collapsed state and finally become insoluble in solution due to the screening effect of salts that yield the once‐dominant electrostatic interactions among QA species to hydrophobic–hydrophobic interactions.

     

Towards Controlled Graft Polymerization of Poly[styrene‐co‐(maleic anhydride)] on Functionalized Silica Mediated by Oxoaminium Bromide Salt. Facile Synthetic Pathway Using Nitroxide Chemistry

A TEMPO bromide salt is used to functionalize a silica surface with nitroxyl moieties. The functionalization reaction takes place in 48 h under mild conditions. In a second step, grafts of styrene‐maleic anhydride copolymer are grown from the functionalized silica surface by heating it in the presence of the monomers. FT‐IR and TGA analysis show that the silica was first functionalized with nitroxide moieties, and then that grafts of styrene‐maleic anhydride grew from the functionalized silica surface. A reaction mechanism is proposed in order to explain the findings. The results suggest that the oxoaminium salts are good candidates for the functionalization and grafting of surfaces that contain hydroxy groups and for the generation of hybrid materials with improved properties.

     

Selective Guest Uptake from Solvent Mixtures in the Clathrate Phase of Syndiotactic Polystyrene

Summary: Selective absorption uptake during the guest‐exchange processes in the δ form of syndiotactic polystyrene (sPS) was confirmed by IR spectroscopy. When films of the δ form were immersed in hexane/decane or chloroform/decane mixtures, decane molecules were incorporated preferentially in the δ form. Sorbate uptake by the δ form was greatly accelerated when the sorbate was mixed with a solvent penetrable to the amorphous region of sPS.

Concentration changes in a δ‐form film during sorption processes: sorption of a chloroform(D)/decane(H) mixture (1:1 molar ratio).     

Synthesis and Characterization of Novel Biodegradable Copolymers of 5‐Benzyloxy‐1,3‐dioxan‐2‐one and Glycolide

A series of novel biodegradable random copolymers of 5‐benzyloxy‐1,3‐dioxan‐2‐one (5‐benzyloxy‐trimethylene carbonate, BTMC) and glycolide were synthesized by ring‐opening polymerization. The copolymers were characterized by nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). The incorporation of BTMC units into the copolymer chains results in good solubility of the polymers in common solvents. The in vitro degradation rate can be tailored by adjusting the composition of the copolymers.

The in vitro degradation of the homopolymers and poly(BTMC‐co‐GA) copolymers.     

Synthesis and Properties of Oligophenylene‐Layered Polymers

We report syntheses of phenylene‐, biphenylene‐, and terphenylene‐layered polymers with a xanthene scaffold by the modified Suzuki‐Miyaura coupling reaction. Their optical properties were studied in detail. The polymer end‐capped by nitrobenzene units, which act as fluorescence quenchers, exhibited the photo‐excited energy transfer from the layered oligophenylenes to the terminal units.

     

Synthesis of Well‐Defined Polybenzamide‐block‐Polystyrene by Combination of Chain‐Growth Condensation Polymerization and RAFT Polymerization

Well‐defined diblock copolymers composed of poly(N‐octylbenzamide) and polystyrene were synthesized by reversible addition‐fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain‐growth condensation polymerization. Synthesis of a dithioester‐type macro‐CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate‐CTA containing poly(N‐octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N‐octylbenzamide)‐block‐polystyrene with controlled molecular weight and narrow polydispersity.

     

Facile Fabrication of pH‐Responsive and Size‐Controllable Polymer Vesicles From a Commercially Available Hyperbranched Polyester

A novel pH‐responsive polymer vesicle obtained by the aqueous self‐assembly of carboxy‐terminated hyperbranched polyesters is reported. The synthesis is very simple, just a one‐step esterification of the commercially available hydroxy‐terminated hyperbranched polyester of Boltorn Hx (x = 20, 30, 40) with succinic anhydride. The vesicle size can be controlled from 200 nm to 10 µm by simply adjusting the solution pH as well as the degrees of branching (or generation).

     

A Strategy for Synthesis of Ion‐Bonded Supramolecular Star Polymers by Reversible Addition‐Fragmentation Chain Transfer (RAFT) Polymerization

We have developed a novel strategy for the preparation of ion‐bonded supramolecular star polymers by RAFT polymerization. An ion‐bonded star supramolecule with six functional groups was prepared from a triphenylene derivative containing tertiary amino groups and trithiocarbonate carboxylic acid, and used as the RAFT agent in polymerizations of tert‐butyl acrylate (tBA) and styrene (St). Molecular weights and structures of the polymers were characterized by ¹H NMR and GPC. The results show that the polymerization possesses the character of living free‐radical polymerization and the ion‐bonded supramolecular star polymers PSt, PtBA, and PSt‐b‐PtBA, with six well‐defined arms, were successfully synthesized.

     

Novel Spectrally Stable Saturated Blue‐Light‐Emitting Poly[(fluorene)‐co‐(dioctyldibenzothiophene‐S,S‐dioxide)]s

Novel poly[(fluorene)‐co‐(2,8‐dioctyldibenzothiophene‐S,S‐dioxide‐3,7‐diyl)]s were synthesized. The octyl group on the 2,8‐dioctyldibenzothiophene‐S,S‐dioxide (DOSO) unit improved the solubility of the polymers and broadened the optical band gap from 2.95 to 3.20 eV as the content of DOSO unit increases. The electroluminescence (EL) spectra of polymers show CIE coordinates around (0.16, 0.07) independent of the ratio of DOSO units in the polymers, owing to the ICT and steric hindrance dual‐function. A high efficiency of 3.1 cd · A⁻¹ (EQE = 3.9%) was obtained with the configuration of ITO/PEDOT:PSS/polymer/Ba/Al. The results indicate that PF‐3,7DOSOs could be a promising candidate for saturated blue‐emitting polymers with spectral stability and high efficiency.

     

Atom Transfer Radical Polymerization of Styrene and Methyl Methacrylate from Mesoporous Ordered Silica Particles

Summary: Mesoporous silica was used as substrate for the grafting of alkyl halides initiators. The control over the surface‐initiated polymerization of styrene and MMA, in terms of molar mass and molar mass distribution, was successfully achieved using an ATRP mechanism. The occurrence of the polymerization inside the mesopores was confirmed by thermogravimetric analysis.

Transmission electron microscopy and schematic representation of mesoporous silica functionalized by the anchored iniator (left) and the grafted polymer (right).     

Self‐Assembled Hollow Polyaniline/Au Nanospheres Obtained by a One‐Step Synthesis

Self‐assembled hollow nanosphere composites of polyaniline and Au nanoparticles (PANI‐p‐TSA/Au) were chemically synthesized from solutions containing p‐toluenesulfonic acid (p‐TSA) with the addition of gold chloride trihydrate as the oxidant. The composite materials were characterized by SEM, TEM, and a range of spectroscopic methods. Spectroscopic characterizations confirmed that the polymeric product is a form of doped PANI, while electron diffraction and X‐ray diffraction showed that elemental Au was present in the PANI‐p‐TSA/Au nanocomposites. The room temperature electrical conductivity of the PANI‐p‐TSA/Au nanocomposites was two orders of magnitude greater than a PANI‐p‐TSA obtained in the presence of ammonium persulfate as the oxidant under the same conditions.

     

Combining Steric and Electrostatic Stabilization Using Hydrophilic MacroRAFT Agents in an Ab Initio Emulsion Polymerization of Styrene

Hydrophilic (co)polymers carrying a thiocarbonyl thio end group such as poly(dimethylaminoethyl methacrylate), poly(ethylene oxide), and poly(ethylene oxide)‐block‐poly(dimethylaminoethyl methacrylate) have been evaluated as precursors of stabilizers in batch ab initio emulsion polymerization of styrene under acidic conditions to form electrosterically stabilized polystyrene latex particles. As a mixture of P(DMAEMA/H⁺Cl⁻)‐RAFT and PEO‐RAFT failed to give satisfactory results, PEO‐RAFT was used as a control agent for the RAFT polymerization of DMAEMA, and the resulting block copolymer was successfully used in ab initio styrene emulsion polymerization.

     

Photochemical Generation of Ferrocene‐Based Redox‐Polymer Networks

A photochemical approach toward the generation of enzyme‐containing redox polymer networks, which are the key material in enzymatic sensors and biofuel cells, is described. The approach is based on the incorporation of photo‐reactive benzophenone groups into the redox polymers. The obtained polymers are then deposited on the surface of glassy carbon electrodes and cross‐linked by illumination with UV light at 365 nm. If this step is done in the presence of the enzyme glucose oxidase, functional electrodes are obtained that yield electrical power upon addition of glucose. This work specifically addresses the question of electrode stability in buffer and demonstrates how slight variations in the chemistry of the redox polymer have a dramatic effect on the electrochemical performance of the electrodes. Different ferrocene‐containing redox polymer networks are synthesized and their properties in physiological buffer are studied.

     

Design of Heterocomplementary H‐Bonding RAFT Agents – Towards the Generation of Supramolecular Star Polymers

Supramolecular poly(vinyl acetate) PVAc 3‐arms stars were successfully generated by Reversible Addition–Fragmentation chain Transfer (RAFT)‐polymerized chains bearing hydrogen‐bonding heterocomplementary associating units. Chain Transfer Agents (CTA) bearing thymine‐ and diaminopyridine‐based units were first synthesized and proved to mediate efficiently the polymerization of VAc. The binding ability of the chains in solution was then demonstrated by ¹H NMR and GPC measurements, proving the formation of the supramolecular stars.

     

Novel Chromophore‐Functionalized Poly[2‐(trifluoromethyl) adamantyl acrylate‐methyl vinyl urethane]s with High Poling Stabilities of the Nonlinear Optical Effect

Nonlinear optical vinyl polymers with high glass transition temperature (T_g) were prepared by the functionalization of a fluorinated acrylate‐methyl vinyl isocyanate copolymer. A modified pathway to obtain a thiophene bridged chromophore was worked out. Poled films of the polymers show a fairly high and stable nonlinear optical response, even at elevated temperatures.

The thiophene‐bridged chromophore, based on a substituted dicyanomethylene‐dihydrofuran acceptor, synthesized here.