A Facile Method for Controlling the Molecular Weight of Hyperbranched Light‐Emitting Polymers

Summary: Two series of hyperbranched conjugated polymers were synthesized via an A₃ + B₂ type Wittig reaction. The molecular weights of the polymers were successfully tuned by simply changing the feed ratio of the monomers. Polymers with higher molecular weights presented more efficient photoluminescence, higher thermal stability and higher performance of LEDs.

     

Small‐Angle Scattering From Branched Polymers

The single‐polymer form factor is determined for branched polymers using a scaling argument in order to recover the low‐Q Porod exponent characteristic of the overall structure. The high‐Q Porod exponent characterizes the local branching structure. An alternative approach based on a high‐Q expansion contains information about functionality, branch length and branch content. The specific case of a starburst dendrimer for which the form factor is known is discussed. The model predictions are compared to small‐angle neutron scattering data from a dilute solution of dendrimer in D₂O.

     

Role of Low Molecular Weight Polymers on the Dynamics of Silicon Anodes During Casting

This work probes the slurry architecture of a high silicon content electrode slurry with and without low molecular weight polymeric dispersants as a function of shear rate to mimic electrode casting conditions for poly(acrylic acid) (PAA) and lithium neutralized poly(acrylic acid) (LiPAA) based electrodes. Rheology coupled ultra-small angle neutron scattering (rheo-USANS) was used to examine the aggregation and agglomeration behavior of each slurry as well as the overall shape of the aggregates. The addition of dispersant has opposing effects on slurries made with PAA or LiPAA binder. With a dispersant, there are fewer aggregates and agglomerates in the PAA based silicon slurries, while LiPAA based silicon slurries become orders of magnitude more aggregated and agglomerated at all shear rates. The reorganization of the PAA and LiPAA binder in the presence of dispersant leads to a more homogeneous slurry and a more heterogeneous slurry, respectively. This reorganization ripples through to the cast electrode architecture and is reflected in the electrochemical cycling of these electrodes.     

端基对超支化高分子性质影响的研究

对端羟基脂肪族超支化高分子的端基进行了乙酰化和硅烷化改性，研究了不同端基对超支化高分子的玻璃化温度，折光指数增量以及特性粘度的影响。结果表明，端基的极性减小使超支化高分子的玻璃化温度降低，不同端基的超支化高分子的折光指数增量也有很大差异，而强极性的端基使超支化高分子在溶液中易产生团聚作用。由于端基在超支化高分子中所占比重较大，端基是影响超支化高分子性质的重要因素。     

ABg型缩聚形成的超支化聚合物的支化度与分子形态

用聚合反应动力学模型, 详细分析了AB_g型缩聚体系中各种结构单元的演变, 对超支化聚合物支化度的各种定义作了比较, 并对AB_g型反应体系的支化度提出了一个改进的定义, 使得支化度随g的增加而增加, 当g从2增加到无穷大, 最大支化度相应地从0.5增加到1－e^－1. 对均方回转半径的数值计算表明, 在确定的A基团转化率(x), z-均均方回转半径几乎与g无关, 当x＝0.999时, 随着g从2增加到无穷大, z-均回转半径只增加0.1%. 但是, 同样的条件下, z-均聚合度增加到2倍. 这一现象表明在任何指定的A转化率, AB_g型缩聚中形成的超支化聚合物的分子轮廓与g无关, 随着g 增大而在超支化聚合物中增加的结构单元(或聚合度)必定分布在分子内部.     

含光敏剂184结构的超支化碱溶性感光聚合物的合成及性能

以季戊四醇为“中心核”,通过与偏苯三酸酐,环氧氯丙烷反应合成超支化聚酯,利用合成聚合物分子外围的羧基与含环氧基的1-羟基环己基苯基酮、甲基丙烯酸缩水甘油酯反应合成分子末端含光敏剂结构的超支化碱溶性感光聚合物。聚合反应转化率在1 h内可达80%以上;合成聚合物的玻璃化转变温度为200℃,200℃以内无失重,200~300℃之间有轻微失重,其粘度表现为超支化聚合物的粘度特性,并且在碱性水溶液中溶解性好,无需外加光敏剂,在紫外光照射下便可固化、交联,具有较小的凝胶曝光能量E0(1×10-3~1×10-2J/cm2)和较好的光敏性。     

Emulsion Ripening through Molecular Exchange at Droplet Contacts

Two coarsening mechanisms of emulsions are well established: droplet coalescence (fusion of two droplets) and Ostwald ripening (molecular exchange through the continuous phase). Here a third mechanism is identified, contact ripening, which operates through molecular exchange upon droplets collisions. A contrast manipulated small‐angle neutron scattering experiment was performed to isolate contact ripening from coalescence and Ostwald ripening. A kinetic study was conducted, using dynamic light scattering and monodisperse nanoemulsions, to obtain the exchange key parameters. Decreasing the concentration or adding ionic repulsions between droplets hinders contact ripening by decreasing the collision frequency. Using long surfactant chains and well‐hydrated heads inhibits contact ripening by hindering fluctuations in the film. Contact ripening can be controlled by these parameters, which is essential for both emulsion formulation and delivery of hydrophobic ingredients.     

Influence of Reactive Diluent on UV-curing of Acrylate Terminated Hyperbranched Polymers

A Aeries of hydroxylic hyperbranched polymers were derived from 2,2-bis (methylol) propionic acid and tris (methylol) propane reacted with acrylic acid to various extents. The obtained acrylated hyperbranched polymers alone or with a monofunctional diluent, isobornylene acrylate(IBOA) were further cured by UV radiation. The cured films based on the modified polymers alone all demonstrated poor mechanical properties due to their high network densities and low moving ability of polymer chains. For the composite systems, the cured films demonstrated improved mechanical properties due to the low network densities and high chain moving ability. With more IBOA included in the systems, acrylate groups can react to a higher extent during the curing process.     

Small‐angle neutron scattering investigation of structural changes in nafion membranes induced by swelling with various solvents

The structure of Nafion‐117 perfluorosulfonate ionomer membranes was investigated with small‐angle neutron scattering techniques. Structural changes induced by the swelling of the membranes with water, alcohols, and dipolar, aprotic solvents were monitored at solvent‐swelling levels ranging from approximately 2 vol % to greater than 50 vol %. Membranes swollen up to approximately 50 vol % solvent exhibited two scattering maxima, one known to be associated with ionic regions of the membrane structure and one known to be associated with correlation distances between crystalline regions in the membrane structure. The positions of both maxima shifted toward lower scattering vector values as the solvent content in the membrane increased. The shift in the position of both maxima was linearly related to the solvent volume fraction in the membrane. The Bragg spacings corresponding to both the ionic‐feature scattering maximum and the crystalline‐feature scattering maximum were plotted versus the solvent volume fraction in the membranes, and the data fit with linear regression. The slopes associated with the curves of the spacing versus the solvent volume fraction were greater for the crystalline‐feature spacing than for the ionic‐feature spacing for all solvents other than water; this was indicative of preferential segregation of nonaqueous solvents into regions of the structure not directly associated with the ionic scattering maximum. © 2002 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 387–400, 2002; DOI 10.1002/polb.10092     

Anion Transport Using Core Functionalized Hyperbranched Polymers and Evidence of a Dense Packed Limit Based on Molecular Weight

Being able to bind, select, and transport species is central to a number of fields, including medicine, materials, and environmental science. In particular, recognizing a specific species from one phase and transporting it across, or into another phase, has obvious applications in environ-mental science, for example, removal of unwanted or toxic materials from an aqueous or organic phase. In this paper, we describe an approach that uses a functionalized dendritic polymer to bind and transport a small anionic molecule across an organic phase (and between two aqueous phases). The design was based on encapsulation principles borrowed from nature, where anions are bound and transported by proteins that have specific sites within their globular ordered structures. For the work reported here, a globular dendritic polymer functionalized with an isophthalamide-based receptor was used to replace the protein structure and anion-binding site. Along with control experiments, the binding and transport properties of two functionalized HBPs were assessed using a Pressman U tube experiment. Both HBPs demonstrated an enhanced ability to bind and transport anions (when compared to the anion-binding site used in isolation). Furthermore, optimum binding and transport occurred when the smaller of the two HBPs were used. This supports our previous observations regarding the existence of a dense packed limit for HBPs.     

Selenium/Tellurium‐Containing Hyperbranched Polymers: Effect of Molecular Weight and Degree of Branching on Glutathione Peroxidase‐Like Activity

A series of novel hyperbranched polyselenides and polytellurides with multiple catalytic sites at the branching units has been synthesized via the polycondensation of A₂ + B₃ monomers. The GPx‐like activities of these polymer mimics were assessed and it was found that the polytellurides showed higher GPx‐like activities than the corresponding polyselenides. Interestingly, the polymers with higher molecular weights and degree of branching (DB) showed higher GPx‐like activities than the analogous lower molecular weight polymer. The enhancement in the catalytical activity of the hyperbranched polymers with increasing molecular weight affirmed the importance of the incorporation of multiple catalytic groups in the macromolecule which increases the local concentration of catalytic sites.     

Kinetics of Collapse Transition and Cluster Formation in a Thermoresponsive Micellar Solution of P(S‐b‐NIPAM‐b‐S) Induced by a Temperature Jump

Structural changes at the intra‐ as well as intermicellar level were induced by the LCST‐type collapse transition of poly(N‐isopropyl acrylamide) in ABA triblock copolymer micelles in water. The distinct process kinetics was followed in situ and in real‐time using time‐resolved small‐angle neutron scattering (SANS), while a micellar solution of a triblock copolymer, consisting of two short deuterated polystyrene endblocks and a long thermoresponsive poly(N‐isopropyl acrylamide) middle block, was heated rapidly above its cloud point. A very fast collapse together with a multistep aggregation behavior is observed. The findings of the transition occurring at several size and time levels may have implications for the design and application of such thermoresponsive self‐assembled systems.     

掺杂聚合物对溶致液晶结构的影响

利用聚合物大分子作构建组分,将其掺杂到不同类型表面活性剂构成的溶致液晶中,考察对液晶相结构的影响．利用小角X射线散射及偏光显微镜对聚合物掺杂前后液晶的结构进行表征,并讨论了聚合物与液晶模板间的相互作用．对阴离子型表面活性剂琥珀酸二异辛酯磺酸钠(AOT)／水液晶体系,聚合物的嵌入使层间距d增大;而对非离子表面活性剂十二烷基聚氧乙烯醚(C12EO4)／水体系,除小分子量的聚乙二醇PEG400外,其它聚合物嵌入使d减小,表明聚合物分子类型、大小及浓度对溶致液晶的结构参数甚至组装方式有不同的影响机制．     

Gelation mechanism and microstructure of organogels formed with various types of gelators

The small‐angle neutron scattering (SANS) and dynamic light scattering (DLS) investigation were carried out for organogels in toluene, formed by organogelators, to elucidate the relationship between the chemical structure and the gelation mechanism as well as the physical properties of the gels. Three different organogelators, that is cyclo(L ‐β‐3,7‐dimethyloctylasparaginyl‐L ‐phenylalanyl) (CPA), trans‐(1R,2R)‐bis(undecylcarbonylamino)cyclohexane (TCH), and N^ε‐lauroyl‐N^α‐stearylaminocarbonyl‐L ‐lysine ethyl ester (LEE), were chosen for comparison. The SANS intensity functions of toluene solutions of these gelators could be reduced with the concentration and were described with a scattering function for thin rods. This indicates that the gels consist of noncorrelated, rod‐like elements aggregated to each other. The characteristic features of the gelation properties, such as the critical gelation concentration, C_gel, the gelation temperature, T_gel, the gel structure, and the gelation mechanism, were different from each other. CPA had the lowest C_gel and became a gel gradually as the temperature decreased, while TCH and LEE had higher C_gels and underwent a sharp sol–gel transition. We conclude that the gelation mechanisms between the CPA and TCH solutions are different. The “CPA type” gelators form a gel by a linear extension of hydrogen‐bonded plane, while the “TCH type” gelators form a twisted wire, because of its strong helicity and crystallizability. In addition, in the latter type, a next generation of fibrils easily stacks on top of the previous ones to form larger fibrils. These models well explain the DLS results and the mechanical properties. That is, the fibrillar stems in CPA gels are rather mobile and fragile, while those in TCH and LEE are frozen and brittle. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3567–3574, 2005