Poly(diindenonaphthalene) and Poly(indenofluorene) – Tuning the Absorption Properties of Low Bandgap Cross‐Conjugated Polymers

Summary: Semiconducting polymers with moderate HOMO–LUMO energy gaps between 1.5 and 2.0 eV are of increasing attraction as donor components of bulk heterojunction‐type organic solar cells. The synthesis and characterization of a novel cross‐conjugated, aromatic polymer, poly(diindenonaphthalene) PDIN, with a HOMO‐LUMO gap of ca. 1.6 eV (λ_max: 724 nm) in comparison to poly(indenofluorene) PIF, a previously described, structurally related polymer, is presented. The replacement of the central benzene ring of PIF by a naphthalene moiety in PDIN leads to an increase of the optical bandgap energy of ca. 0.16 eV.

Chemical structure of PIF and PDIN.     

Polybenzimidazoles for High Temperature Fuel Cell Applications

Summary: Fuel cells were designed for high temperature operations. Poly[2,2′‐(m‐phenylene)‐5,5′‐bibenzimidazole] (PBI) was synthesized in a solution of P₂O₅, CH₃SO₃H, and CF₃SO₃H. The PBI was dissolved in a mixture of CF₃CO₂H and H₃PO₄ and the solution was used for the preparation of Pt catalyst slurry for membrane electrode assembly. The single cell showed a current density of 280 mA · cm⁻² at a cell voltage of 0.5 V with feeds of H₂ and O₂ at 160 °C and without external humidification.

     

Synthesis of Block Copolymers Modified with Phosphonate Ester Groups Using Nitroxide‐Mediated Radical Polymerization

Summary: Phosphonate groups were introduced into block copolymers of styrene derivatives either as single end‐groups or as small blocks using nitroxide‐mediated radical polymerization. In order to combine the hydrophobic and hydrophilic segments, block copolymers with N,N‐dimethyl acrylamide were synthesized. After hydrolysis to phosphonic acid groups, adsorption of the polymer onto metal oxides was possible.

Conversion of the phosphonate groups by transesterification with trimethylbromosilane (TMBS), followed by hydrolysis of the silylester group.     

Heparin‐Controlled Growth of Polypyrrole Nanowires

Summary: Heparin, a potent anticoagulant, has been used for the first time for the synthesis of PPy nanowires serving not only as an anion dopant but also as an effective morphology‐directing agent. The obtained PPy nanowires exhibit long and fine structures with smooth surface and the average diameter of the nanowires is about 90–100 nm and lengths are several hundred nanometers to micrometers. The possible formation mechanism of PPy nanowires may be related to the chain structure of heparin with functional groups ( SO and  COO⁻) on the surface. The effect of concentrations of pyrrole monomers and heparin on the morphology and size of PPy nanowires has been investigated.

SEM image of PPy nanowires synthesized in the presence of heparin.     

A Novel Photopolymerization Initiating System Based on an Iridium Complex Photocatalyst

The use of a photocatalyst (tris(2‐phenylpyridine)iridium [Ir(ppy)₃]) being able to generate both radicals and cations to initiate free radical polymerization and ring opening polymerization is presented. Remarkably, under soft irradiations (fluorescence bulb, sunlight), excellent cationic polymerization profiles and final conversions are obtained. The involved mechanisms are investigated by ESR experiments.

     

A Methodology for Investigating Protein Adhesion and Adsorption to Microarrayed Combinatorial Polymers

Here, we report the use of fluorescently labelled proteins to study protein adsorption to microarrayed synthetic polymers for the first time, indicating that this method is appropriate for the study of protein adsorption on these arrays. To investigate protein adhesion directly we use atomic force microscopy (AFM) to measure the force of adhesion between a protein‐coated probe and the arrayed polymers. Both approaches show promise as methods for screening protein interactions with polymers in a microarray format. Comparison of these very different measures of protein–surface interactions indicate a good correlation.

     

New Millable Polyurethane/Organoclay Nanocomposite: Preparation,Characterization and Properties

The preparation, characterization and properties of novel millable polyurethane/organoclay nanocomposites are reported. Clay treated with methyl tallow bis(2‐hydroxyethyl) quaternary ammonium chloride was used as an organoclay for nanocomposite preparation. X‐ray diffraction indicated the intercalation of polymer chains inside the interlayer spacings of the clay. Dynamic mechanical analysis showed a significant increase in storage modulus, and tensile strength increases with increased organoclay loading.

X‐ray diffraction patterns of millable polyurethane/organoclay nanocomposites.     

Amphiphilic Patchy Composite Colloids

A new approach to fabricate patchy silica/polymeric gel composite colloids with amphiphilic performance is reported. The amphiphilic performance is rendered by selectively modifying the silica framework with a silane that contains an oleophilic alkyl chain. The patchy composite colloids are dispersible in both water and oil, and may be used as a solid particle surfactant. The modified silica framework can also assist other functional materials to disperse in a desired media. The corresponding silica/carbon composite colloids become amphiphilic after a sequential activation of carbon and modification of silica, and meanwhile possess as good electron conductivity as the as‐prepared silica/carbon composite colloids.

     

Heat-resistant resins obtained from polymer precursors bearing β,β′-dicyanovinyl terminal groups

Certain polymer precursors of the general formula: where A is an aromatic structure bearing ester, amide, azomethine, or imide linkages were synthesized. Particularly, 4-hydroxybenzaldehyde was condensed with malonitrile to afford 4-hydroxy-β,β′-dicyanostyrene which reacted with a half molar amount of terephthaloyl dichloride in the presence of an acid acceptor. In addition, 3-nitrobenzaldehyde was condensed with malonitrile to yield 3-nitro-β,β′-dicyanostyrene that was catalytically hydrogenated to the corresponding amine. The latter reacted with a half molar amount of terephthaloyl dichloride, terephthaldehyde, pyromellitic dianhydride, or benzophenone tetracarboxylic dianhydride. The polymer precursors were characterized by elemental analyses as well as IR and ¹H-NMR spectroscopy. Their curing behavior was investigated by DTA. Crosslinked polymers were obtained by curing the monomers at 300°C for 24 h. They were stable up to 407–437°C in N₂ and afforded an anaerobic char yield of 65–50% at 800°C. The thermal stability of resins was correlated with their chemical structures. © 1993 John Wiley & Sons, Inc.     

Poly(ethylene glycol) Surface Coated Magnetic Particles

Summary: A methacrylate‐functionalized poly(ethylene glycol) macromonomer was copolymerized at the surface of methacrylate‐derivatized maghemite nanoparticles. After silylation of the magnetic core with methacryloxypropyltrimethoxysilane, two grafting procedures based on either a direct copolymerization reaction in water or an inverse emulsion polymerization were compared. A direct copolymerization led to low polymer surface amounts, whereas an inverse emulsion process allowed nanocomposite particles containing up to 90 wt.‐% polymer to be obtained.

TEM picture of maghemite‐PEG hybrid particles.     

Facile Fabrication of Functional Polypyrrole Nanotubes via a Reactive Self‐Degraded Template

Summary: Polypyrrole nanotubes with high electric conductivity and azo function have been fabricated in high yield via an in‐situ polymerization. During the process fibrillar complex of FeCl₃ and methyl orange (MO), acting as a reactive self‐degraded template, directed the growth of polypyrrole on its surface and promoted the assembly into hollow nanotubular structures.

TEM image of uncompleted PPy nanotubes synthesized in MO solutions after reaction for 40 min.     

Saccharide Sensing Based on Saccharide‐Induced Conformational Changes in Fluorescent Boronic Acid Polymers

Summary: A novel fluorometric saccharide detection strategy has been established by utilizing saccharide‐induced conformational changes in copolymers containing boronic acid and fluorescent units. The polymer chain changes its conformation due to an alteration of the charge state induced by binding with saccharides. The conformational changes are conveniently detected by monitoring excimer to monomer intensity ratio in the fluorescence spectra. Thus, the present strategy would be a promising way for the creation of highly selective and sensitive saccharide‐sensing systems.

Saccharide‐induced conformational change in copolymers containing boronic acid units.     

Rheology and Physical Properties of Polyethylene/Polyethylene‐Ionomer Blends and their Clay Nanocomposites

Rheological and solid‐state physical properties of blends containing high‐density polyethylene (HDPE) and a polyampholyte derivative (PE‐g‐PA) are assessed along with their onium ion‐exchanged montmorillonite clay (NR‐MM) nanocomposites. Strong deviations from the log‐additivity rule of zero‐shear viscosity, combined with synergistic behavior in tensile moduli, are consistent with a multi‐phase blend morphology. While this affects clay dispersion in filled blends, PE‐g‐PA/HDPE based nanocomposites are shown to exhibit a favorable balance between material stiffness and ductility.

     

Investigation of Thermal Expansion of Polyimide/SiO2 Nanocomposites by Molecular Dynamics Simulations

In this paper, an atomistic model for PI/SiO₂ hybrid nanocomposites was designed for the investigation of physical properties of this material on the base of molecular dynamics simulations. The thermal properties of a reference pure PI matrix in the temperature range of 300–650 K were first investigated. The results for the CTE and the glass transition temperature showed good agreement with the experimental data. Then, the thermal expansion of the model of PI/silica composite material with different SiO₂ fractions was investigated at normal conditions. The CTE of the composite model decreases with the increase in the SiO₂ content in agreement with experimental studies. The results show a threshold for the SiO₂ loading beyond which the material model exhibits ultra‐low thermal expansion.

     

Zur Darstellung von Cyclophosphaten,Cyclophosphatophosphonaten, Diphosphonaten und Diphosphiten in Harnstoffschmelzen

Preparation of Cyclophosphates, Cyclophosphatophosphonates, Diphosphonates, and Di-phosphites in Urea Melts Ammonium cyclotriphosphate (NH₄)P₃O₉, ammonium cyclotetraphosphate [P^IV? P^IV ? O? ]₂, ammonium cyclotriphosphatophosphonates Ammonium organyldiphosphonates And ammonium diphosphites are prepared in high yields on heating acidic phosphates, phosphonates, and phosphites in urea or urea/ammonium nitrate melts. The mechanism of the dehydration of phosphorus compounds containing POH groups in molten urea is discussed.     

Electropolymerizable Terthiophene S,S‐Dioxide‐Fullerene Diels‐Alder Adduct for Donor/Acceptor Double‐Cable Polymers

The preparation of a novel fullerene‐thiophene derivative by Diels‐Alder addition of terthiophene S,S‐dioxide was demonstrated. Extrusion of SO₂ from the adduct is an effective process that yields a stable cyclohexadiene‐1,4‐bisthiophene–C₆₀ adduct in good isolable yield. The product has been accurately characterized and opens the way to synthesize new C₆₀ derivatives “via” Diels‐Alder methodology without the possibility of cycloreversion. Electrochemical and spectroscopic properties of this macromolecule were studied and supported by theoretical calculations to interpret its electronic structure. The first approach to the electropolymerization of this macromonomer produces donor‐acceptor molecular wires providing a new and versatile way to fullerene‐based double cable polymers.

     

Structured Hybrid Nanoparticles via Surface‐Initiated ATRP of Methyl Methacrylate from Ordered Mesoporous Silica

Structured hybrid nanoparticles were synthesized via surface‐initiated atom transfer radical polymerization of MMA from ordered mesoporous silica (OMS) nanoparticles with various morphologies. The design of the OMS particles was adjusted to target either spherical core‐shell or cylindrical morphologies with a mean diameter below 400 nm. The polymer growth via ATRP from the silica surface was well‐controlled as demonstrated by the macromolecular characteristics of the grafted chains. Original hybrid multilayered nanoparticles composed of either a dense silica core or hollow core; an inner OMS shell showing radial orientation of the mesopores and an outer PMMA shell with controlled thickness were successfully prepared.