PANI nanofibers are prepared electrochemically by template‐free method on a stainless steel electrode. Both the hydrophilicity and the lipophilicity of the modified SS surface are enhanced by the nanostructured PANI, and a super‐amphiphilic surface is obtained in this way. The influence of polymerization conditions, such as polymerization potentials, polymerization time, the acidity, and the dopants on the super‐amphiphilic property, has been systematically investigated. In addition, the mechanisms of obtaining a super‐amphiphilic surface are briefly discussed.
Ultrahigh‐density carbon nanoring arrays on a silicon wafer are achieved by a novel templated solution deposition method. Initially the silica nanodot arrays obtained from a nanoporous thin film are used as a template to direct the surface dewetting of a phenolic precursor, while further curing and calcination of the phenolic precursor, followed by etching of the silica arrays, results in large area carbon nanoring arrays with a diameter as small as 25 nm. This study provides a simple and robust chemical route to fabricate complex nanoring arrays with ultrahigh density of about one terabit per square inch.
Microporous films consisting of two‐dimensionally ordered void structures ‐ so‐called honeycomb films ‐ were produced by evaporation of polymer solutions under high humidity. Two types of poly(vinyl cinnamate)s were used: A newly synthesized amphiphilic poly(vinyl cinnamate) and a mixture of a commercial poly(vinyl cinnamate) and an amphiphilic polyion complex. Photo‐crosslinking of the honeycomb structure could be achieved by UV irradiation while completely retaining the film morphology. The crosslinked films showed excellent stability against organic solvents.
A series of bioactive amphiphilic peptide derivatives that contain the RGD (Arg‐Gly‐Asp) sequence have been designed and prepared by the standard solid‐phase peptide synthesis (SPPS) technique. The influence of the molecular structure and pH change on the morphology of the amphiphilic peptide derivatives in aqueous solution is investigated. The results reveal that the amphiphilic peptide derivatives with different molecular structures exhibit different self‐assembly behavior in response to environmental changes. Furthermore, by adjusting the pH, the molecular interactions of amphiphilic peptide derivatives are tuned, which results in a morphology change.
This paper develops a non‐spherical polymeric micelle using an amphiphilic block copolymer and a porphyrin crystalline structure. The nanoscale polymer micelles were characterized by transmission electron microscopy (TEM) and atomic force microscopy (AFM), revealing particle sizes of approximately 150 nm with a particular shape in the hexagonal lattice. The shape shows the selective uptake efficacy for the HeLa and macrophage cells, and inhibits phagocytosis against the macrophage.
A novel phenylacetylene ( 1 ) having two hydroxyl groups and a chiral pinanyl group together with the other three related phenylacetylenes has been synthesized and (co)polymerized by using an achiral catalytic system. Among the four monomers, only 1 is suitable to the asymmetric‐induced polymerization ( AIP ). Chiral amplification phenomenon is only observed in the copolymerization of 1 with an achiral phenylacetylene having two hydroxyl groups ( 3 ). The tight helical cis‐cisoidal main chain formed by making intramolecular hydrogen bonds between the hydroxyl groups in the copoly( 1 / 3 ) enhances the efficiency of chiral induction and as a result chiral amplification phenomenon is observed during the copolymerization.
A triblock copolymer, poly(ethylene glycol)–poly(propylene glycol)–poly(ethylene glycol) was end-capped by acryloyl groups using a biodegradable oligolactide as spacer, and such biodegradable amphiphilic macromers could form micelles in water. A nanogel was prepared via polymerizing macromers in a micelle, and a macroscopic physical gelation was found upon heating a concentrated aqueous nanogel suspension. Such a sol–gel transition with a chemically crosslinked nanogel as the building block was thermoreversible. While the hydrogel affords a promising injectable biomaterial; this research reveals new physics of the thermogelling mechanism of amphiphilic block copolymers.
The Lewis acid B(C6F5)3 in combination with hydrosilanes exhibits remarkable activity in the oligomerization of sulfone‐ and phosphonate‐based monomers. This process opens new routes to high‐tech silicone‐based materials, i.e., thermoplastic elastomers and heat‐resistant polysiloxanes.
Au nanoparticle‐decorated polypyrrole nanotubes (defined as PPy/Au nanocomposites) are prepared by an in situ reduction process. Polypyrrole (PPy) nanotubes are prepared by a self‐degraded template method, and Au nanoparticles are deposited in situ by the reduction of HAuCl4. The size and uniformity of the Au nanoparticles that decorate the PPy nanotubes can be controlled by adjusting the experimental conditions, such as the stabilizers used and the reaction temperature. The morphologies and optical properties of the nanocomposites have been characterized by scanning electron microscopy, transmission electron microscopy, UV‐vis, and FT‐IR spectroscopy. Conductivity measurements show that the conductivities of the nanocomposites decrease with a decrease of temperature, and the conductivity–temperature relationship obeys the quasi‐one dimensional variable range hopping model.
Poly(L ‐lactide)/layered aluminosilicate nanocomposites were synthesized in bulk by ring‐opening polymerization in the presence of two organo‐modified montmorillonites. When the organo‐modifier consisted of an ammonium cation bearing primary hydroxyl groups, polymerization was initiated by the alcohol functions after adequate activation. The growing polymer chains were directly “grafted” onto the clay surface through the hydroxyl‐functionalized ammonium cations yielding exfoliated nanocomposites with enhanced thermal stability.
TEM image of a fully exfoliated Cloisite®30B‐based nanocomposite, showing delamination of the silicate layers. 相似文献
Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.
A typical TEM image of gold nanoparticle aggregate 2 . 相似文献
Summary: A new calix[4]arene‐based periodic mesoporous organosilica has been synthesized using tetraethoxysilane (TEOS) and a calix[4]arene‐based silane monomer as the precursors and cetyltrimethylammonium bromide (CTAB) surfactant as the structure‐directing template, and is shown to be capable of visual detection and entrapment of NO2.
Synthesis of the novel mesoporous organosilica material containing covalently bound tetra‐O‐alkylated calix[4]arene hosts. 相似文献
A Y‐shaped amphiphilic fluorinated monomer, 1‐(1H,1H,2H,2H‐perfluorodecyloxy)‐3‐(3,6,9‐trioxadecyloxy)‐propan‐2‐yl acrylate has been synthesized and its polymerization by reversible addition–fragmentation chain transfer (RAFT) homopolymerization has been investigated. The results show that the molecular weights of the polymers are controlled and all the molecular weight distributions are lower than 1.4. Well‐defined copolymers with 2‐(N,N‐dimethylamino)ethyl methacrylate have been prepared by RAFT polymerization, and the surface properties of the block and random copolymers have been examined by contact angle measurement for water and hexadecane. It has been found that the surfaces of the block copolymers simultaneously exhibit excellent anti‐fog and oil‐repellent properties.
RAFT inverse miniemulsion polymerization is demonstrated for the first time as an alternate way to synthesize hydrophilic polymer latexes. The kinetic behavior of inverse RAFT miniemulsion polymerization of acrylamide is similar to that observed in aqueous RAFT solution polymerization. A water‐soluble initiator provides better control than a lipophilic initiator in inverse RAFT miniemulsion polymerization under the conditions used here.
The RAFT radical polymerization of vinyl monomers in supercritical carbon dioxide was modeled using the Predici® simulation package. The sensitivity of polymerization responses on formulation and process variables was analyzed. The simulations were carried out using kinetic and physical parameters corresponding to the polymerization of methyl methacrylate in supercritical carbon dioxide, using AIBN as initiator, at 65 °C and 200 bar, and using values of the addition and fragmentation kinetic rate constants of a “typical” RAFT agent, as reference conditions. This is the first report in the literature addressing the modeling or simulation of RAFT polymerization in supercritical carbon dioxide.
This study reports a continuous prepartion of spherical or hemispherical polymer particles simply utilizing the phase separation in polymer blend films during the coating process. We took an advantage of the strong phase separation between a water‐soluble crystalline polymer as a matrix and hydrophobic polymers as minor components. We demonstrated the prepartion of water‐soluble polystyrene (PS) particles, nitrilotriacetic acid (NTA)‐functionalized PS particles for protein separation, and semiconducting poly(3‐hexylthiophene) (P3HT) particles. The sizes of the particles could be controlled by adjusting the film thickness and weight fraction of the minor component polymers in the blend film. It provides a simple facile way to prepare polymer particles in a continous process.
Here, we report the use of fluorescently labelled proteins to study protein adsorption to microarrayed synthetic polymers for the first time, indicating that this method is appropriate for the study of protein adsorption on these arrays. To investigate protein adhesion directly we use atomic force microscopy (AFM) to measure the force of adhesion between a protein‐coated probe and the arrayed polymers. Both approaches show promise as methods for screening protein interactions with polymers in a microarray format. Comparison of these very different measures of protein–surface interactions indicate a good correlation.
Grafted conjugated polyelectrolytes were synthesized for the first time and characterized. The polymers demonstrated properties of a convenient and efficient protocol for creating Hg2+ sensors. The unique character of the new material comes from an anionic counterion nature with no external cofactors, and imparts high selectivity and fast detection for mercury ion in a fluorescence probe. The concept may be potentially applied to create new sensors for monitoring other ions.
