Summary: The first example of a room temperature reversible addition‐fragmentation chain transfer polymerization conducted directly in aqueous media is detailed. Under these conditions acrylamide and N,N‐dimethylacrylamide may be polymerized in a controlled fashion to near quantitative conversions employing a difunctional trithiocarbonate chain transfer agent (CTA). Hydrolysis studies conducted at pH 5.5 suggest that the CTA is stable up to approximately 50 °C.
Blue emission of oxygen‐doped tertiary amine (triethylamine), a key unit of fluorescent poly(amido amine) dendrimer, was demonstrated. It was found that the fluorescence intensity could be further enhanced if the tertiary amines locate densely in the dendrimer interior as the branching sites. Moreover, a solvatochromic phenol blue, instead of oxygen, is able to induce the blue fluorescence of the tertiary amino‐branching sites based on a guaranteed host‐guest complexation of phenol blue molecules and dendrimer interior.
Interaction chromatography has been employed to validate that adsorption of poly[styrene‐co‐(4‐bromostyrene)] (PBrxS) random copolymers, where x denotes the mole fraction of 4‐bromostyrene (4–BrS) in PBrxS in solution depends on the average number of adsorptive segments, the type of adsorbing substrate, and on the co‐monomer sequence distribution in PBrxS.
The catalytic behavior of three bis(phenoxy‐imine) group‐4 transition‐metal complexes (M = Ti, Zr, Hf), with iBu3Al/Ph3CB(C6F5)4 cocatalyst systems towards propylene polymerization was investigated under atmospheric pressure at 25 °C. The Ti complex produced ultrahigh‐molecular‐weight atactic poly(propylene), whereas Zr and Hf complexes formed high‐molecular‐weight isotactic poly(propylene)s via a site‐control mechanism. The isotactic poly(propylene) obtained with the Hf complex displayed a high melting temperature of 123.8 °C.
RAFT inverse miniemulsion polymerization is demonstrated for the first time as an alternate way to synthesize hydrophilic polymer latexes. The kinetic behavior of inverse RAFT miniemulsion polymerization of acrylamide is similar to that observed in aqueous RAFT solution polymerization. A water‐soluble initiator provides better control than a lipophilic initiator in inverse RAFT miniemulsion polymerization under the conditions used here.
Summary: Amphiphilic cylindrical brush‐coil block copolymers consisting of a polystyrene coil and a cylindrical brush block with poly(acrylic acid) side chains are prepared by ATRP of t‐butylacrylate from a block comacroinitiator. Upon acidolysis of the poly(t‐butylacrylate), water‐soluble polymers were obtained that were observed to form micelles consisting of 4–5 block copolymers on average in aqueous solution. The star‐like nature of such micelles was clearly visualized by scanning force microscopy.
Schematic of coil‐cylindrical brush block copolymer PS‐b‐(PiBEMA‐g‐PAA), its AFM image clearly showing the main chain and the PAA corona of the cylindrical brush block. 相似文献
Summary: An electrospun nonwoven fabric of a cationic polysaccharide, chitosan, was successfully prepared. The present study focuses on the effect of the electrospinning solvent and the chitosan concentration on the morphology of the resulting nonwoven fabrics. The solvents tested were dilute hydrochloric acid, acetic acid, neat formic acid and trifluoroacetic acid. As the chitosan concentration was increased, the morphology of the deposition on the collector changed from spherical beads to interconnected fibrous networks. The addition of dichloromethane to the chitosan‐TFA solution improved the homogeneity of the electrospun chitosan fiber. Under optimized conditions, homogenous (not interconnected) chitosan fibers with a mean diameter of 330 nm were prepared.
Effects of the coexisting dichloromethane (MC) in the prespun chitosan‐TFA solution on the morphology of the electrospun chitosan fibers. The volume ratio of TFA:MC was 70:30 (×5 000). 相似文献
Summary: Organisation behaviours of spherical particles suspended in sheared, lyotropic, liquid‐crystalline polymer solutions have been investigated using polarizing optical microscopy. We find that in a nematic phase the particles phase separate and adopt anisotropic chain‐like structures along the director. An earring defect is observed around a single particle whereas a cross or strings defect between neighbouring particles is found to serve as a repulsive barrier to prevent the particles from contacting each other. A theoretical analysis is presented to explain this new phenomenon.
An optical micrograph of 0.01 wt.‐% glass spheres suspended in a nematic solution of 40 wt.‐% ethyl cellulose in chloroform under an external shear force. 相似文献
The identification and control of a critical stage of polyaniline “nanotube” self‐assembly is presented, namely the granular agglomeration or growth onto nanorod templates. When the synthesis pH is held above 2.5, smooth insulating nanorods exhibiting hydrogen bonding and containing phenazine structures are produced, while below pH 2.5, small 15–30 nm granular polyaniline nanoparticles appear to agglomerate onto the available nanorod surface, apparently improving conductivity of the resulting structures by three orders of magnitude. This finding affects both fundamental theories of polyaniline nanostructure self‐assembly and their practical applications.
We report the use of a PTFE‐based microfluidic device for the encapsulation of living, therapeutically‐active cells within monodisperse alginate microspheres. We present a novel microfluidic platform and a flexible experimental method for the production of alginate microspheres. Cell lines HEK293, U‐2 OS and PC12 were separately encapsulated using this method, with minimal loss of cell viability.
Composite films of poly(3,4‐ethylenedioxythiophene) (PEDOT)‐coated over functionalized multiwalled coiled and linear carbon nanotubes (CNTs) have been fabricated by a simple oxidative electropolymerization route. The nanotubular morphology of the polymer–CNT composite is responsible for the lower charge transfer impedance, lower internal resistance, and superior capacitive response in comparison to that shown by the control PEDOT film doped by trifluoromethanesulfonate ions. This facile electrochemistry exhibited by the PEDOT–CNT composite film ensues in a remarkably high coloration efficiency of 367 cm2 · C−1 at 550 nm, hitherto unrealized for PEDOT; thus demonstrating the huge potential the PEDOT–CNT composite film has as cathode for the entire spectrum of electrochromic devices.
A novel amphiphilic diblock copolymer composed of a hydrophilic poly(ethylene oxide) and a hydrophobic polymethacrylate with photochromic azopyridine moieties in the side groups was synthesized by atom transfer radical polymerization. The copolymeric vesicles showed photoinduced circular process including fusion, damage and defect formation, disruption, disintegration and rearrangement in H2O/THF during the irradiation of UV light. The process of photoresponsive cycle can be inhibited at any moment by visible light.
2,5‐Bis(chloromethyl)‐1,3,4‐oxadiazole was synthesized and dehydrohalogenation of this model compound was investigated under various base conditions. The formation of an intermediate with quinodimethane‐type structure is suggested for reaction in EtONa/EtOH. Polymerization of this intermediate proceeds via an anionic mechanism to form poly(1,3,4‐oxadiazole‐2,5‐diyl‐1,2‐vinylene). Polymerization at a toluene/water interface results in shorter polymerization times, milder conditions, higher molecular weights, higher yields and fewer defects in the polymer as compared to the corresponding polycondensation route.
Summary: The performances of ethylene polymerization catalysts based on III and commercial methylaluminoxane were investigated by reducing the content of free trimethylaluminum in methylaluminoxane by its reaction with 2,6‐di‐tert‐butylphenol. This allowed optimization of the formulation of the catalyst, affording a high‐molecular‐weight linear polyethylene (PE) with a productivity [(1 900 kg of PE/(mol of Ni × h)], ten‐fold higher than that previously achieved for the same system adopting commercial methylaluminoxane not pre‐treated with the above phenol derivative.
Poly(ethylene glycol) (PEG)‐based films, nanotubes, and nanotube arrays were successfully made using layer‐by‐layer (LbL) assembly ion‐containing PEO derivatives on porous templates and planar substrates. PEG nanotubes are challenging to produce because PEG dissolves into solutions and solvents used during nanotube processing, but our techniques circumvent the issue. Nanotube dimensions were verified using microscopy and the average observed diameter was 155 nm. The PEG‐based structures showed remarkable stability in water, salt water, and sodium hydroxide solution.
