The preparation, characterization and properties of novel millable polyurethane/organoclay nanocomposites are reported. Clay treated with methyl tallow bis(2‐hydroxyethyl) quaternary ammonium chloride was used as an organoclay for nanocomposite preparation. X‐ray diffraction indicated the intercalation of polymer chains inside the interlayer spacings of the clay. Dynamic mechanical analysis showed a significant increase in storage modulus, and tensile strength increases with increased organoclay loading.
X‐ray diffraction patterns of millable polyurethane/organoclay nanocomposites. 相似文献
Future advances in designing bioactive materials, such as antithrombotic coatings for cardiovascular stents, will require widely applicable and robust methods of surface modification. In this paper, we report on the development of multifunctional polymer coatings made by chemical vapor deposition (CVD) copolymerization. Polymer coatings of various [2.2]paracyclophane derivatives were co‐deposited in controlled ratios and their chemical composition verified by FT‐IR and X‐ray photoelectron spectroscopy. Furthermore, preliminary biocompatibility of these coatings was assessed using human umbilical vein endothelial cells and 3T3 murine fibroblasts. The parallel immobilization of two different antithrombotic biomolecules onto a CVD‐based copolymer is also demonstrated by orthogonal immobilization strategies.
Summary: The nanoindentation test is a fundamental tool to assess the link between morphology and mechanical properties. The preliminary results of a more exhaustive study about the applicability to polymers of the most used procedure to determine elastic modulus by indentation are reported in this short communication. A departure of the experimental conditions from the theoretical assumptions and results that give rise to the Oliver and Pharr analysis is shown to occur under a wide range of experimental conditions, with applied loads and penetration depths covering several orders of magnitude and using different indenter geometries. Unloading curves with exponents significantly larger than 2 are observed in disagreement with the contact mechanics approach used by Oliver and Pharr.
An AFM image obtained in non contact mode of an indentation induced by a sharp AFM tip with a maximum applied load of ca 1.2 µN on amorphous PET. 相似文献
Summary: A pH‐sensitive block copolymer is synthesized by step polymerization and its pH‐sensitive micellization‐demicellization behavior is studied. This polymer has a hydrophilic MPEG (shell) and hydrophobic but pH‐sensitive poly(β‐amino ester) (core), which can form a self‐assembled micelle. As confirmed by fluorescence spectroscopy and dynamic light scattering (DLS), this polymer shows a sharp pH‐sensitive micellization‐demicellization behavior. It is confirmed that the pH sensitivity is affected by the molecular weight ratio between the MPEG and poly(β‐amino ester).
Plots of the intensity ratio I337/I334 (from pyrene excitation spectra): a) vs. pH for copolymer samples and b) vs. log (concentration) for M1. 相似文献
A branched copolymer containing a degradable polyperoxide linkage at a branching point was synthesized by the radical copolymerization of dienyl‐functionalized polystyrene and polyisoprene macromonomers with molecular oxygen. The ternary mixture of the branched copolymer and the macromonomers showed phase‐separated structure after annealing at 45 and 90 °C. The adjacent spacing of the phase‐separated structure was in the order of submicron to micrometer, which is larger than that of general microphase separated structures, due to the presence of homopolymers (macromonomers). Annealing at 110 °C induced thermal decomposition of the polyperoxide followed by in‐situ collapse and a drastic morphology change in the phase‐separated structure.
A novel pH‐switchable macroscopic assembly is reported using alginate‐based hydrogels functionalized with host (α‐cyclodextrin, αCD) and guest (diethylenetriamine, DETA) moieties. Since the interaction of αCD and DETA is pH sensitive, the host hydrogel and guest hydrogel could adhere together when the pH is 11.5 and separate when the pH is 7.0. Furthermore, this pH‐controlled adhesion and dissociation shows a good reversibility. The host and guest polymers have good biocompatibility; therefore, this pH‐sensitive macroscopic assembly shows great potential in biotechnological and biomedical applications.
A direct access to photochromic polymeric vesicles was demonstrated via polymerization‐induced self‐assembly and reorganization (PISR). The resulting vesicles displayed interesting photochromic behaviors different from that of their free polymer chains in DMF, and the vesicles exhibited stronger fluorescence and excellent photostability due to confinement of conformational flexibility of the polymer chains in aggregates.
Summary: The development of a novel technique for the preparation of homogeneous BaTiO3/polyvinylidene fluoride (BT/PVDF) nanocomposites without obvious agglomeration of BaTiO3 particles was reported in this communication. The morphology, structure, and frequency dependence of the dielectric properties of the nanocomposites were characterized. All results show that the dielectric properties of the nanocomposites in this study are desirable, and the process for preparing the nanocomposites has potential applications in the electronic industry.
TEM micrograph of dry BT/PVDF mixtures with nanosized BT particles. 相似文献
Block copolymer nanopaticles were prepared from the mixture solutions containing good/poor solvents by a simple evaporation process. The block copolymers formed disorder, unidirectionally stacked lamellar, and onion‐like structures in nanoparticles depending on preparation temperatures. Thermal annealing induced the disorder‐order phase transition and order‐order phase transformation in the block copolymer nanoparticles, even though the annealing temperature is lower than the of one polymer segment. The unusual thermal behaviors suggest that the glass transition temperature of the block copolymer is decreased by the effect of nanoparticle, whose surface areas are larger than their volumes.
New multifunctional copoly(2‐oxazoline) nanoparticles were prepared for cell studies. The polymer contains double‐bond side chains as potential reaction sites for “thio”‐click reactions as well as a fluorescein label covalently bound to the polymer backbone. Using the nanoprecipitation technique, spherical nanoparticles of 200–800 nm were obtained. Confocal laser scanning microscopy measurements revealed the cellular uptake of the nanoparticles.
DDFT is applied to phase formation in homopolymer/copolymer blends in which the copolymer is extremely disperse with a uniform chemical composition distribution. Such systems develop a core/shell structure with a thick interface. This study is motivated by peculiarities in the phase evolution of industrial PP high‐impact copolymers. It is demonstrated that it is possible to reach time and length scales of relevance for realistic industrial blend systems. A rational method for improving the numerical efficiency of the calculations is presented. The model can be applied to a variety of industrially relevant systems with similar “random chemistry” or extreme copolymer dispersity in coatings, crude oil recovery systems, food emulsions, and so forth.
Summary: A new strategy was developed to prepare disorderly exfoliated nanocomposites, in which a soft siloxane surfactant with a weight‐average molecular weight ( ) of 1 900 was adopted to modify the clay. The modified clay slurry was then mixed with silicone rubber by hand, and exfoliation was achieved. The proposed mechanism thereof was verified by TEM and XRD. The physical entanglement of the soft siloxane surfactant plays a vital role in the diffusion and intercalation of the matrix molecules during the compounding of the slurry‐polymer mixture. This simple method is applicable to other silicone‐based materials reinforced by clay.
TEM micrograph of silicone rubber/clay‐sil nanocomposite. 相似文献
