The mixed Langmuir monolayers and Langmuir–Blodgett (LB) films of homo‐polystyrene (h‐PS) and the diblock copolymer polystyrene‐block‐poly(2‐vinylpyridine) (PS‐b‐P2VP) have been characterized by the Langmuir monolayer technique and tapping mode atomic force microscopy (AFM), respectively. When the content of h‐PS is below 80 wt.‐%, the mixed LB films of h‐PS/PS‐b‐P2VP mainly exhibit isolated circular nanoaggregates. With a further increase of the h‐PS content (80–95%), however, highly uniform and stable necklace‐network structures are observed in the mixed LB films.
We report that the nanostructures of poly(styrene‐block‐4‐vinylpyridine) block copolymer (PS‐b‐P4VP) thin film on a wafer substrate can be re‐assembled by sequential vapor treatment using selected solvents. Metal or other inorganic nanoparticles that were randomly pre‐loaded inside or on the surface of PS‐b‐P4VP thin film could be pulled to the rim of PS and P4VP along with the movements of PS and P4VP blocks during the treatment. As a result, the patterned polymeric or inorganic/polymer composite nanoisland and nanoring arrays were fabricated.
Well‐defined polymethylene‐block‐polystyrene (PM‐b‐PS) diblock copolymers were synthesized via a combination of living polymerization of ylides and atom transfer radical polymerization (ATRP) of styrene. A series of hydroxyl‐terminated polymethylenes (PM‐OHs) with different molecular weight and narrow molecular weight distribution were prepared using living polymerization of ylides following efficient oxidation in a quantitive functionality. Then, the macroinitiators (PM‐MIs ( = 1 900–15 000; PDI = 1.12–1.23)) transformed from PM‐OHs in ≈ 100% conversion initiated ATRPs of styrene to construct PM‐b‐PS copolymers. The GPC traces indicated the successful extension of PS segment ( of PM‐b‐PS = 5 000–41 800; PDI = 1.08–1.23). Such copolymers were characterized by 1H NMR and DSC.
A PDA based sensor, derived from a di‐(2‐picolyl) amine (DPA) substituted diacetylene monomer, displayed a selective colorimetric change and a large fluorescence enhancement in the presence of lead ions. The lead selective PDA‐based chemosensor enabled easy detection of the presence of lead in 100% aqueous solution by the naked‐eye.
Complex micelles were obtained from PS‐b‐PNIPAM‐b‐PAA micelles and PEG‐b‐P4VP block copolymers via the strong electrostatic interaction and hydrogen bonding between PAA and P4VP blocks in water. The PS block formed the core and the PAA/P4VP complex shell functioned as a semi‐permeable membrane which could control the permeation of small molecules. Between the core and shell, the large fluid‐filled space that was formed with the thermoresponsive PNIPAM gel could retain the loaded drug for a long period of time. With increasing temperature, the shrinkage of the PNIPAM coils pumped the drug out of the complex micelles. The complex micelles functioned as a contractive “nanopump”, which could potentially be applied as a thermosensitive controlled release system.
Gold nanoparticles‐coated polystyrene (AuNPs‐coated PS) composite particles with raspberry‐like morphology are successfully prepared with the aid of a unique thermodynamically driving effect. It is of considerable interest that the AuNPs generate and self‐assemble with raw, ordinary PS microspheres that preexist in the oxidation–reduction systems. The synthesized AuNPs‐coated PS composite particles have been extensively characterized using scanning electron microscope, transmission electron microscope, and UV–Vis‐NIR spectroscopy. The results indicate that the morphology of the resultant composite particles is governed by simply changing the amount and type of reductants and the concentration of PS microspheres. The AuNPs‐coated PS composite particles also exhibit the good surface‐enhanced Raman scattering and catalytic performances.
We have systematically studied the thin film morphologies of asymmetric polystyrene‐block‐poly(ethylene oxide) (PS‐b‐PEO) diblock copolymer subjected to solvent vapors of varying selectivity for the constituent blocks. Upon a short treatment in neutral or PS‐selective vapor, the film exhibited a highly ordered array of hexagonally packed, cylindrical microdomains. In the case of PEO selective vapor annealing, such ordered cylindrical microdomains were not obtained. Instead, fractal patterns on the microscale were observed and their growth processes investigated. Furthermore, hierarchical structures could be obtained if the fractal pattern was exposed to neutral or PS selective vapor.
Low‐molecular weight amphiphilic diblock copolymers, polystyrene‐block‐poly (2‐vinylpyridine) (PS‐b‐P2VP), and (P2VP‐b‐PS) with different block ratios were synthesized for the first time via organotellurium‐mediated living radical polymerization (TERP). For both the homo‐ and block copolymerizations, good agreement between the theoretical, and experimental molecular weights was found with nearly 100% yield in every case. The molecular weight distribution for all the samples ranged between 1.10 and 1.24, which is well below the theoretical lower limit of 1.50 for a conventional free radical polymerization. Furthermore, a very simple approach to producing highly dense arrays of titania nanoparticles (TiO2) is presented using a site‐selective reaction of titanium tetraisopropoxide within the P2VP domains of micellar film of P2VP‐b‐PS in toluene through the sol–gel method.
The morphology of a thin film was studied for a binary mixture of asymmetric PS‐b‐PMMA block copolymers on a flat silicon wafer coated with 50 nm thick silicon oxide. AFM and TEM reveal that the PMMA cylinders orient perpendicular to the substrate by tuning the film thickness. Furthermore, grating substrates with different width and depth are used to guide the alignment of the perpendicular cylinders. As a result, an array of highly ordered, hexagonally packed PMMA cylinders in the PS matrix with a domain spacing of less than 25 nm has been produced.
The synthesis of water soluble star‐block copolypeptides and their encapsulation properties are described. The star‐block copolypeptides, obtained by ring‐opening polymerization of amino acid N‐carboxyanhydrides, consist of a PEI core, a hydrophobic polyphenylalanine or polyleucine inner shell, and a negatively charged polyglutamate outer shell. The encapsulation study showed that these water soluble, amphiphilic star‐block copolypeptides could simultaneously encapsulate versatile compounds ranging from hydrophobic to anionic and cationic hydrophilic guest molecules.
Blends of polystyrene/poly(methyl methacrylate) (PS/PMMA) (30/70) prepared by simple melt mixing form a droplet (PS) in‐matrix (PMMA) morphology. It is found that addition of a carefully designed copolymer PS‐b‐P(S‐ran‐MMA) (SSM) compatibilizer could convert the morphology into a co‐continuous system. Indeed, the continuity of the dispersed PS phase increased with an increase in PS‐b‐P(S‐ran‐MMA) content, and a fully co‐continuous morphology (continuity = 100%) was obtained at 20% SSM fraction with a characteristic size of 100 nm.
Summary: Fluorescent images that illustrate acid‐catalyzed tert‐butoxycarbonyl (tBoc) deprotection patterns in polymer films were obtained using fluorescent sensors based on 7‐hydroxycoumarin dyes. Three commercial 7‐hydroxycoumarins, which are highly fluorescent, become practically nonemissive upon protection of the 7‐hydroxyl position with tBoc. In thin polymer films, the protected “prefluorescent” probes can return to their deprotected, fluorescent states by reaction with catalytic amounts of photogenerated acid and mild heating.
Protected probes become highly fluorescent after acid‐induced deprotection. 相似文献
Summary: Monodisperse carboxy polystyrene (PS) spheres were synthesized and utilized as an interface to increase the detection sensitivity of some biomolecules. The binding behavior of dacarbazine (DTIC), an anticancer drug, with DNA bases in the absence and presence of the PS spheres was investigated. The results indicated a remarkable effect of PS on the binding behavior of DTIC to DNA bases and significantly enhanced detection sensitivity for the relative biomolecular recognition.
Electrochemical detection of DTIC on a GCE surface in the absence and presence of polystyrene spheres. 相似文献
A new copolymer bearing a cysteine moiety, designed for molecular interaction, metal‐ion detection, and chiral recognition, was synthesised starting from the dibromo derivative of methyl N‐(tert‐butoxycarbonyl)‐S‐thien‐3‐ylcysteinate and distannylthiophene through a Stille coupling reaction. UV‐vis spectroscopy, circular dichroism, NMR spectroscopy, and gel permeation chromatography analyses evidenced that this polymer is able to form self‐assembling structures, through the formation of a hydrogen‐bond network, not only in the solid state but also in solution.
A simple scheme to fabricate 2‐D arrays of Au/titania hybrid nanopatterns is presented, using polystyrene‐block‐poly(ethylene oxide) diblock copolymer (PS‐b‐PEO) as templates coupled with sol–gel chemistry. Both the functionalized Au nanoparticles (NPs) and titania precursors are selectively incorporated into the PEO domain. A series of morphologies ranging from nanodot to nanowire arrays is formed and the mechanism of morphological evolution is discussed. Such hybrid films exhibit characteristic localized surface plasmon resonance bands originating from the coupling between neighboring Au NPs spatially located in a controlled manner.
Films of polyaniline (PANI) featuring about 80% crystallinity and characterised with strong π‐π stacking alignment parallel to the film surface have been obtained directly after the original synthesis upon simple drying of the aqueous PANI suspension. A strong anisotropy in the growth of the nano‐sized crystals produced during the synthesis results in the formation of micrometer‐length fibrils perpendicular to the film surface in the course of water evaporation. The regular intercalation of water molecules between the PANI chains seems to be crucial for their ordering throughout the synthesis and film formation.
Multi‐walled carbon nanotubes (MWNT) purified by acidic solution were processed with PMMA via an in‐situ polymerization. Experimental evidences indicate the role of radical initiator (AIBN) and MWNT, showing increases of polymerization rate and MWNT diameter. Induced radicals on the MWNT by AIBN were found to trigger the grafting of PMMA. Moreover, the solvent cast film showed a better nanoscopic dispersion of MWNT and possibilities of CNT composites in engineering applications.
Fractured surface of multi‐walled carbon nanotube composite with PMMA prepared by in‐situ bulk polymerization. 相似文献
A facile one‐step method has been developed to prepare both superhydrophobic and superoleophilic surfaces of polystyrene (PS) without any chemical modification. A rough film consisting of micro‐bead and nano‐fiber mixed structures is formed by spraying a PS solution onto a large area and any type of substrate. The mixed structures with such unique wettability properties can be used in oil/water separation and as oil sorbents.
Summary: A water‐soluble gold nanoparticle aggregate 2 was prepared by chloroauric acid and a polypseudorotaxane 1 of mono‐6‐thio‐β‐cyclodextrin with poly(propylene glycol) bis(2‐aminopropyl ether) ( ≈ 2 000) in the presence of sodium borohydride in N,N‐dimethylformamide (DMF) solution. The investigative results indicated that the gold nanoparticle aggregate 2 might act as an efficient DNA‐cleavage reagent.
A typical TEM image of gold nanoparticle aggregate 2 . 相似文献
