Synthesis of Highly Hydrophilic Polyaniline Nanowires and Sub‐Micro/Nanostructured Dendrites on Poly(propylene) Film Surfaces

Summary: Polyaniline (PANI) nanowires and sub‐micro/nanostructured dendrites are synthesized and immobilized on PP‐g‐PAA film surfaces via routine oxidative polymerization of aniline under different conditions, where grafting poly(acrylic acid) (PAA) served as a template and dopant, and SDS as a surfactant. The immobilized PANI enhances the surface hydrophilicity of the poly(propylene) (PP) films, and a superhydrophilic surface is obtained in this way. The mechanism of forming different morphologies of PANI and of correspondingly obtaining a superhydrophilic surface are briefly discussed.

FESEM image shows the PANI sub‐micro/nanostructured dendrites immobilized on the surfaces of PP films. The modified surface is highly hydrophilic with a water contact angle of 3°.     

Modified Hyaluronan Hydrogels Support the Maintenance of Mouse Embryonic Stem Cells and Human Induced Pluripotent Stem Cells

These studies provide evidence for the ability of a commercially available, defined, hyaluronan‐gelatin hydrogel, HyStem‐C?, to maintain both mouse embryonic stem cells (mESCs) and human induced pluripotent stem cells (hiPSCs) in culture while retaining their growth and pluripotent characteristics. Growth curve and doubling time analysis show that mESCs and hiPSCs grow at similar rates on HyStem‐C? hydrogels and mouse embryonic fibroblasts and Matrigel?, respectively. Immunocytochemistry, flow cytometry, gene expression and karyotyping reveal that both human and murine pluripotent cells retain a high level of pluripotency on the hydrogels after multiple passages. The addition of fibronectin to HyStem‐C? enabled the attachment of hiPSCs in a xeno‐free, fully defined medium.

     

Degradation of Poly(methyl methacrylate) Model Compounds at Constant Elevated Temperature Studied via High Resolution Electrospray Ionization Mass Spectrometry (ESI‐MS)

The products of the thermal degradation at 95 °C over 10 months of ω‐saturated and non‐saturated poly(methyl methacrylate) (pMMA) model compounds were identified with high accuracy via quadrupole ion trap and quadrupole ion trap‐time of flight (Q‐ToF) mass spectrometry. Analysis of the samples taken via these techniques indicated that degradation of vinyl terminated pMMA proceeds via the incorporation of oxygen via the formation of ethylene oxide type end groups, which subsequently rearrange under the expulsion of formaldehyde and 2‐oxo‐propionic acid methyl ester. The corresponding saturated model compounds were demonstrated to be stable over the same time period. The present findings highlight for the first time that poly(methyl methacrylate) degradation does not necessarily and exclusively proceed via radical intermediates.

     

In situ Localization of Molecules in Crosslinked Particles during Electrohydrodynamic Process: Simple Route to Produce Microcapsules and Fibers with Controlled Release

This study reports a spontaneous selective localization of molecules in crosslinked particles during electrospraying and electrospinning polymer solutions containing the particles. It provides a facile way of preparing microcapsules and fibers with controlled release. The dye molecules were phase separated from the crystalline polymer matrix during the electrohydrodynamic process and moved to the solvent‐rich crosslinked particles. The position of the particles in the microcapsules and fibers could be controlled by adjusting compatibility of the particles with the matrix polymer. The microcapsules and fibers did not show the initial burst release of the molecules and gave considerably prolonged release behavior.

     

Design Criteria for Accurate Measurement of Bimolecular Radical Termination Rate Coefficients via the RAFT‐CLD‐T Method

The reversible addition‐fragmentation chain transfer chain length dependent termination (RAFT‐CLD‐T) technique allows a simple experimental approach to obtain chain‐length‐dependent termination rate coefficients as a function of conversion, k(x). This work provides a set of criteria by which accurate k(x) can be obtained using the RAFT‐CLD‐T method. Visualization of three‐dimensional plots varying all kinetic rate parameters and starting concentrations demonstrates that only certain combinations give an accurate extraction of k(x). The current study provides hands‐on guidelines for experimentalists applying the RAFT‐CLD‐T method.

     

Fabrication of a Metal Particle Array Based on a Self‐Assembled Template from a Two‐Armed Polymer

A two‐armed polymer with a crown ether core self‐assembles to produce macroporous films with pores perpendicularly reaching through the film down to the substrate. A possible assembling mechanism is discussed. The pore size can be conveniently adjusted by changing the solution concentration. These through‐hole macroporous films provide a template for fabricating an array of Cu nanoparticle aggregates.

     

Enhancement of Photostability in Blue‐Light‐Emitting Polymers Doped with Gold Nanoparticles

A dramatic increase in the photostability of a blue‐light‐emitting polymer, poly(9,9‐dioctylfluorene), was achieved by the addition of 5–10 nm gold nanoparticles. The optical absorption band of the gold nanoparticles was tuned to resonate the triplet exciton ground state bandgap energy of the polymer. Photo‐oxidation rate of poly(9,9‐dioctylfluorene) was effectively reduced by doping the polymer with very small amounts (≈10⁻⁶–10⁻⁵ volume fraction) of the gold nanoparticles.

Retarded photo‐oxidation in PDOF nanocomposite films with various doped gold nanoparticles.     

Facile Fabrication of Functional Polypyrrole Nanotubes via a Reactive Self‐Degraded Template

Summary: Polypyrrole nanotubes with high electric conductivity and azo function have been fabricated in high yield via an in‐situ polymerization. During the process fibrillar complex of FeCl₃ and methyl orange (MO), acting as a reactive self‐degraded template, directed the growth of polypyrrole on its surface and promoted the assembly into hollow nanotubular structures.

TEM image of uncompleted PPy nanotubes synthesized in MO solutions after reaction for 40 min.     

Anionic Polysaccharides as Templates for the Synthesis of Conducting Polyaniline and as Structural Matrix for Conducting Biocomposites

A green chemoenzymatic pathway for the synthesis of conducting polyaniline (PANI) composites is presented. Laccase‐catalyzed polymerization in combination with anionic polysaccharides is used to produce polysaccharide/PANI composites, which can be processed into flexible films or coated onto cellulose surfaces. Different polysaccharide templates are assessed, including κ‐carrageenan, native spruce O‐acetyl galactoglucomannan (GGM), and TEMPO‐oxidized cellulose and GGM. The resulted conducting biocomposites derived from natural materials provide a broad range of potential applications, such as in biosensors, electronic devices, and tissue engineering.

     

An Iterative Method for Producing Equilibrated Symmetric Three‐Arm Star Polymer Melts in Molecular Dynamics

Melts of symmetric three‐arm stars are generated using a novel iterative method. In this method, an equilibrated low molecular weight configuration is used to generate progressively higher molecular weights by affine scaling and equilibration. At each stage in the progression, the synthetically lowered entanglement density allows bypassing of the exponentially large relaxation times of branched polymers. The quality of equilibration was assessed by measuring the mean dimensions, distribution of dimensions, and internal length scales of the polymers. The total time required to generate the progression of equilibrated configurations was seen to scale as the Rouse time of the highest molecular weight.

     

Oriented Synthesis of One‐Dimensional Polypyrrole Molecule Chains in a Metal‐Organic Framework

We report for the first time the preparation of single polypyrrole (PPy) molecule chains using a “metal‐organic framework” with 1 nm channels as a template. The obtained one‐dimensional (1‐D) PPy has highly structure order and excellent conductivity, which has improved by as much as five orders of magnitude in comparison with that of 2‐D PPy.

     

Regioregularity in Poly(3‐alkoxythiophene)s: Effects on the Faraday Rotation and Polymerization Mechanism

Summary: Poly(3‐alkoxythiophene)s with different degrees of regioregularity were prepared using three different methodologies. It is shown that their Faraday rotation is highly dependent on the degree of regioregularity. The origin of the differences in regiospecificity of the methodologies is discussed.

Structure of the polymer pol 3 .     

Hexyl‐Substituted Oligoselenophenes with Central Tetrafluorophenylene Units: Synthesis,Characterisation and Application in Organic Field Effect Transistors

A series of selenophene oligomers incorporating conjugated fluorinated phenylene units have been synthesised as potential semiconductor materials for organic field‐effect transistors (OFETs). X‐ray crystallography shows that the molecules are held in close proximity by several short intermolecular contacts, making them ideal candidates for OFET applications.

     

Synthesis and Properties of Oligophenylene‐Layered Polymers

We report syntheses of phenylene‐, biphenylene‐, and terphenylene‐layered polymers with a xanthene scaffold by the modified Suzuki‐Miyaura coupling reaction. Their optical properties were studied in detail. The polymer end‐capped by nitrobenzene units, which act as fluorescence quenchers, exhibited the photo‐excited energy transfer from the layered oligophenylenes to the terminal units.

     

Parametric Analysis of the Intermediate Concentration in a RAFT Polymerization and its Influence upon the Polymerization Kinetics

Summary: A kinetic analysis of living/controlled radical polymerizations in bulk mediated by RAFT is presented. The main objective is to show how the kinetics of the RAFT process and, in particular, of the RAFT intermediate radical is affecting the overall polymerization rate. Namely, three different cases are analyzed: (i) slow fragmentation of the RAFT intermediate; (ii) cross‐termination of the RAFT intermediate with other radicals; and (iii) slow re‐initiation of the RAFT agent leaving group. Simplified analytical formulas are derived for the time‐dependent concentrations of the involved species as well as for conversion. They are supported by numerical simulations and are qualitatively compared to literature experimental findings. Criteria are also given to judge the influence of the RAFT reaction kinetic rate constants on the different phenomena observed experimentally in RAFT polymerization, namely inhibition and retardation. Since these criteria are given by using non‐dimensional groups, they can be readily applied to a broad spectrum of experimental conditions.

Logarithmic non‐dimensional concentration for the radicals (r) and intermediate radicals (q) versus the non‐dimensional polymerization time ( ).     

Modeling of the Phase Separation Behavior of Polydisperse Semi‐Flexible Diblock Copolymers

Summary: A modified random phase approximation method with a cumulant expansion for the semi‐flexible structure factor of diblock copolymers was exercised to describe the phase separation behavior of semi‐flexible and polydisperse diblock copolymers. Scattering curves and spinodal diagrams were calculated applying monomer specific input parameters. The influence of polydispersity was included applying basic concepts of mathematical statistics utilizing several probability density distributions in the case of the two single blocks. In contrast to semi‐flexibility, the main effect of polydispersity was found to shift the spinodal up, thus to enlarge the range of existence of the homogeneous phase.

Twofold Schultz‐Zimm distribution of diblock copolymers.     

Sorption of Hydrophobic Organic Compounds by Aqueous Latexes

Summary: Optical absorption measurements are used for the first time to investigate the uptake of pure organic solvents or solutions by latex particles. Sorption into glassy polymer particles is a two‐stage process with distinctly different characteristic times, which reflects that an initial softening of the outer particle layer facilitates further uptake. The sorption of solutions containing highly water‐insoluble compounds allows the preparation of composite nanoparticles, which are hardly accessible by other routes.

Photograph of the neat 100 nm latex (right) particles and the particles after dying by sorption with the hydrophobic pigment Sudan IV (left).