This paper describes a poly(dimethylsiloxane) (PDMS)‐based microfluidic platform for constructing the phase diagram of poly(N‐isopropyl acrylamide) (PNIPAM) in aqueous solution. The PNIPAM solution was delivered into a nanoliter chamber through the main microchannel. An osmotic pressure difference was established between the chamber and the control microchannel by flowing a high‐concentration salt solution in the control microchannel. Controlled evaporation of water resulted in increasing concentration of PNIPAM. A phase diagram of PNIPAM was built by measuring the cloud points at different concentrations, with a minimum point at ≈40 wt.‐%. The microfluidic platform has the advantages of low sample consumption and rapid heat exchange rates, and allows studying viscous polymer solution.
Summary: An initiator for nitroxide mediated ‘living’ free radical polymerization was prepared with a fluorescent tag attached to the initiating alkyl radical terminus. This was used to synthesize amphiphilic poly(acrylic acid)‐block‐polystyrene diblock copolymers, which self assembled in a tetrahydrofuran/buffer solution to form structures that are visible by fluorescence.
DNA hydrogels which are composed of an entangled network without a crosslinker are synthesized and examined in regards to their sensitivity to salt and pH changes. The DNA hydrogel fibers only exhibited a marked response – that is a fast and large change in length – under biological conditions ([Na+] = 0.15 M at pH = 7) and are therefore suitable materials for bio‐inspired devices.
Several alkyl side chains are bonded to each polymeric repeat unit using both coordinated ligands and electrostatically bound counterions to directly control the interface curvature of the self‐organized structures. 2,6‐Bis(octylaminomethyl)pyridine is Zn‐coordinated to poly(4‐vinylpyridine) (P4VP) with dodecylbenzenesulfonate (DBS) counterions, leading to multicomb polymeric supramolecules, poly[(4VP)Zn(2,6‐bis(octylaminomethyl)pyridine)(DBS)2]. Coordination is evidenced by infrared spectroscopy and visualized by quantum chemical calculations. The amorphous hexagonal self‐organized structures are characterized using X‐ray measurements.
Regioregular poly(3‐hexylthiophene) has been successfully incorporated into a novel amphiphilic block copolymer. The amphiphilic nature of poly(3‐hexylthiophene)‐block‐poly(acrylic acid) has been investigated using spectroscopic methods and has yielded solvatochromic behavior in several solvents of varying polarity. Evidence suggests that a supramolecular, long range ordering of block copolymer occurs in polar solvents, resulting in the formation of aggregates. Despite relatively large amounts of non‐conductive blocks, the poly(3‐hexylthiophene) diblock copolymer yields a high conductivity of 1 S · cm−1, and atomic force microscopy shows the formation of a highly organized nanofibrilar morphology in the solid state.
A novel heterogeneous copper(I) catalyst system, which is based on readily available poly(ethyleneimine), has been used as a recyclable catalyst for Cu(I) catalyzed “click” 1,3 dipolar cycloaddition reactions of azides and alkynes in organic media. Branched poly(ethyleneimine) was first methylated and then cross‐linked with 1,9‐dibromononane. Subsequently, after the immobilization of Cu(I)Br, this system was applied for heterogeneous copper catalyzed click chemistry of a few model reagents and polymeric compounds.
A novel semi‐interpenetrating polymer network based on alginate and poly(N‐isopropylacrylamide) (PNiPAAm) has been synthesized that shows response to temperature and magnetic fields. Highly homogeneous porous hydrogels are obtained by copolymerizing N‐isopropylacrylamide and bis‐acrylamide in the presence of an aqueous alginate solution. The synthesis of magnetic iron oxides by in‐situ oxidation of iron cations coordinated to the alginate network results in a hydrogel with an enhanced deswelling rate with respect to pure PNiPAAm.
Degradable dendrimer‐like PEOs were designed using an original ABC‐type branching agent featuring a cleavable ketal group, following an iterative divergent approach based on the anionic ring opening polymerization (AROP) of ethylene oxide and arborization of PEO chain ends. A seventh generation dendrimer‐like PEO carrying 192 peripheral hydroxyls and exhibiting a molar mass of 446 kg · mol−1 was obtained in this way. The chemical degradation of these dendritic scaffolds was next successfully accomplished under acidic conditions, forming linear PEO chains of low molar mass (≈2 kg · mol−1), as monitored by 1H NMR, SEC, and MALDI‐TOF mass spectrometry as well as by AFM.
Summary: Silvered polyimide films have been fabricated by direct ion exchange of a damp‐dry poly(amic acid) film with an aqueous silver solution such as silver nitrate. Thermal curing of the silver(I )‐containing films under tension leads to cycloimidization of the poly(amic acid) into polyimide with a concomitant silver(I ) reduction and aggregation at both film sides to give reflective and conductive double‐surface‐silvered polyimide films. The metallized films retain the essential properties of the parent polyimide.
Surface morphology of the prepared double‐surface‐silvered polyimide films. 相似文献
Summary: Water‐soluble biomimetic chitosan derivative conjugating zwitterionic phosphorylcholine was efficiently prepared through Atherton‐Todd reaction under the mild conditions, and the possible formation mechanism of zwitterionic product was related to the nucleophilic attack of adjacent 3‐hydroxyl on the D ‐glucosamine residue to phosphorus with the help of base. UV absorption and melting behaviors of DNA/phosphorylcholine‐bound chitosan derivative showed that the phosphorylcholine‐bound chitosan derivative could be a new carrier for long‐circulating macromolecular drug delivery.
Conformational analysis of macromolecular structures reveals interesting higher‐order spatial arrangements. Analyzing these features as a function of time provides insights into the dynamical behavior of these systems and the identification of relevant subdomains. We present some visual‐analytic methods that we devised to explore the spatial‐temporal properties from molecular dynamics simulation data. These methods automatically detect common features and connect them to properties of interest. These methods yield physical insights that are not easily obtainable with existing methods for particle simulation data, as illustrated for polyacetylene interacting with a carbon nanotube.
A dielectric elastomer derived from a polystyrene‐block‐poly(ethylene‐co‐butylene)‐block‐polystyrene triblock copolymer swollen with a midblock‐selective solvent is reported to show promise as a nanostructured organic actuator requiring no pre‐strain. This might provide an attractive alternative to conventional acrylic, siloxane, and polyurethane elastomers since the electromechanical properties are composition‐tunable.
We report a new type of step‐growth radical addition‐coupling polymerization (RACP) involving consecutive addition of carbon‐centered radical derived from α,α′‐dibromo dibasic ester to NO double bond of C‐nitroso compound followed by cross‐coupling of carbon‐centered radical and in situ formed nitroxyl radical, which produces alternating copolymers with high molecular weight and unimodal molecular weight distribution from saturated and unsaturated monomers.
Summary: Vinylphosphonic acid is polymerized at 80 °C by free radical polymerization to give a high‐molecular‐weight polymer ( of 6.2 × 104) as determined by static light scattering. High‐resolution NMR spectroscopy is used to gain microstructure information. Information based on tetrad probabilities is utilized to deduce an almost atactic configuration. In addition, 13C NMR spectroscopy gives evidence for the presence of head‐to‐head and tail‐to‐tail links. Refined analysis of the 1H NMR spectra allows for the quantitative determination of the fraction of these links (23.5% of all links). Experimental evidence suggests that the polymerization proceeds via cyclopolymerization of the vinylphosphonic acid anhydride as an intermediate. Titration curves indicate that high‐molecular‐weight poly(vinylphosphonic acid) PVPA behaves as a monoprotic acid.
Radical polymerization of vinylphosphonic acid proceeds by cyclopolymerization of its anhydride. 相似文献
