Non-conservative stability of intermediate spring supported columns with an elastically restrained end support

The non-conservative stability of an intermediate spring supported uniform column clastically restrained at one end and subjected to a follower force at the other unsupported end is studied. It is found that when the intermediate spring support is far from the unsupported end, the instability mechanism is flutter. As the intermediate spring support approaches the unsupported end, the instability mechanism is changed from flutter to divergence with the increase of intermediate spring stiffness. For the hinged-intermediate and guided-intermediatc spring supported columns, the critical buckling load of flutter instability will first decrease, then increase as the intermediate spring stiffness is increased. Nevertheless, when the instability mechanism is divergence, the critical buckling load depends on the location of the intermediate spring support only, whereas for the clamped-intermediate spring supported column the critical buckling load of divergence instability decreases monotonically to a fixed value as the intermediate spring stiffness is increased. Finally, the influence of elastic end restraints on the stability of the column is also investigated.     

THE TRANSVERSE NONLINEAR FREE VIBRATION AND THE BUCKLING OF A COMPRESSIVE BAR ON AN ELASTIC FOUNDATION

基于Hamilton 原理,运用假设时间模态法,得到了弹性基础上压杆的横向非线性自由振动与屈曲的位移型常微分控制方程. 考虑一端固定另一端可移简支边界条件,采用打靶法得到了结构第一至第三阶结构频率与一阶屈曲载荷的数值结果. 结果表明：随轴心压力增加,结构频率减小;随弹性基础刚度增加,结构频率与屈曲载荷均增加;弹性基础刚度对结构频率的影响随振型阶数增加在减小;在小振幅的情形下,不同振型对一阶屈曲载荷的影响很小.     

Lateral buckling of beams with shear deformations – A hyperelastic formulation

The equilibrium and buckling equations are derived for the lateral buckling of a prismatic straight beam. A consistent finite strain constitutive law is used, which is based on a hyperelastic model for an isotropic material. The kinematics of the cross-sectional deformations are based on a Timoshenko type beam displacement of the cross-sectional plane using Euler angles and two shear finite rotations coupled with warping taken normal to the displaced plane. Also derived are the second order approximations to the displacements, curvatures, twist and internal actions. The constitutive relationships for the internal actions reveal new coupling terms between the bending moments, torsion and bimoment, which are functions of the cross-sectional warping and shear deformations. New Wagner type nonlinear torsion terms are derived which are functions of the warping of the cross-sectional plane, and are coupled to the twisting and shear deformations of the cross-section. Solutions are determined for the lateral buckling of a prismatic monosymmetric beam under pure bending and the flexural–torsional buckling under axial compression. For the flexural–torsional buckling problem it is found that the Euler type column buckling formula is consistent with Haringx’s column buckling formula while the torsional buckling formula is different to conventional equations. The second variation of the total potential is also derived. The effects of shear deformations are explored by examining the non-dimensional lateral buckling equation for a simply supported beam.     

Buckling of stochastically heterogeneous beams,using a functional perturbation method

The buckling load and its probabilistic nature (average and variance) of Bernoulli beams with stochastic material (bending stiffness) properties is derived analytically by a new functional perturbation method (FPM). A buckling shape function is assumed, based on the homogeneous solution and additional terms to account for the morphology effects. The buckling load in the transcendental equation is treated as a functional of the bending modulus (stiffness or compliance) field. Applying a functional perturbation to the above equation, the buckling load is found analytically to any desired degree of accuracy, as a function of material morphology. The FPM is executed using both stiffness and compliance statistical data. The impact of each of the two data sources on the solution accuracy is examined, showing that compliance based solutions are accurate for small correlation lengths. Statically indeterminate problems can be treated with no additional effort. An example of a simply supported beam is solved in detail. Comparison with previous studies, where stochastic finite element and Monte Carlo simulation were used, showed the relative accuracy and insight capabilities of the method. The clamped-free case is also studied to demonstrate that symmetry conditions, used for homogeneous beams to find the buckling load on the basis of a simply supported case, are not valid for heterogeneous beams.     

Buckling of thin-walled columns accounting for initial geometrical imperfections

The paper is devoted to the effect of some geometrical imperfections on the critical buckling load of axially compressed thin-walled I-columns. The analytical formulas for the critical torsional and flexural buckling loads accounting for the initial curvature of the column axis or the twist angle respectively are derived. The classical assumptions of theory of thin-walled beams with non-deformable cross-sections are adopted. The non-linear differential equations are derived and the critical buckling loads are approximated by means of the Galerkin’s method. Comparison of analytical results to numerical analysis of simply supported I-columns by means of finite element method (FEM) is provided. Moreover the analytical formulas is adapted to I-columns with lipped flanges and satisfactory agreement of analytical and numerical results of stability analysis is observed.     

基于均匀荷载面曲率的简支裂纹梁损伤识别

为了采用模态参数对结构裂纹进行定位与定量,基于集中柔度模型,采用无质量的扭转弹簧模拟裂纹,建立简支裂纹梁的振动微分方程。针对现有柔度曲率指标仅能判断裂纹的大致范围,基于线性插值理论,建立裂纹位置与相邻测点均匀荷载面曲率差的关系,提出裂纹进一步定位公式,实现裂纹位置的精确定位。针对现有大多数损伤识别方法无法实现裂纹的损伤定量,基于位移曲率与结构刚度和弯矩的关系,理论推导了均匀荷载面曲率的结构刚度损伤程度识别方法,基于弹簧串联原理和线刚度思想,首次提出串联等效线刚度模型,建立裂纹深度与均匀荷载面曲率的关系,实现裂纹深度的定量。通过简支裂纹梁数值算例,考虑多裂纹的损伤情况,验证了新方法对裂纹定位与定量的有效性。     

Influence of shear deformation on the buckling of elastically supported beams

Summary The influence of shear deformation on the buckling behavior of a beam supported laterally by a Winkler elastic foundation is studied. A full investigation of the bifurcation points at which, under axial load, the beam becomes critical with respect to one or two simultaneous buckling modes is made. The configurations and stabilities of the equilibrium paths that bifurcate from the critical points are derived. From the results of theoretical analysis, it becomes evident that shear deformation has a considerable effect upon the equilibriums and stabilities of the post-buckling of the beam. The results for the Bernoulli-Euler beam can be obtained as a limiting case for those of the present beam by letting the shear stiffness tend to infinity.Supported by the National Natural Science Foundation of China     

Axisymmetric compressive buckling of multi-walled carbon nanotubes under different boundary conditions

The paper studies the axisymmetric compressive buckling behavior of multi-walled carbon nanotubes (MWNTs) under different boundary conditions based on continuum mechanics model. A buckling condition is derived for determining the critical buckling load and associated buckling mode of MWNTs, and numerical results are worked out for MWNTs with different aspect ratios under fixed and simply supported boundary conditions. It is shown that the critical buckling load of MWNTs is insensitive to boundary conditions, except for nanotubes with smaller radii and very small aspect ratio. The associated buckling modes for different layers of MWNTs are in-phase, and the buckling displacement ratios for different layers are independent of the boundary conditions and the length of MWNTs. Moreover, for simply supported boundary conditions, the critical buckling load is compared with the corresponding one for axial compressive buckling, which indicates that the critical buckling load for axial compressive buckling can be well approximated by the corresponding one for axisymmetric compressive buckling. In particular, for axial compressive buckling of double-walled carbon nanotubes, an analytical expression is given for approximating the critical buckling load. The present investigation may be of some help in further understanding the mechanical properties of MWNTs.     

热载荷作用下梯度多孔材料梁弯曲及过屈曲力学行为的研究

基于Bernoulli-Euler梁理论,引入物理中面解耦了复合材料结构的面内变形与横向弯曲特性,研究了梯度多孔材料矩形截面梁在热载荷作用下的弯曲及过屈曲力学行为．假设沿梁厚度方向材料的性质是连续变化的,利用能量法推导了矩形截面梁的控制微分方程和边界条件,并用打靶法对无量纲化的控制方程进行数值求解．利用计算得到的结果分析了材料的性质、热载荷、边界条件对矩形截面梁非线性力学行为的影响．结果表明,对称材料模型下,固支梁与简支梁均显示出了典型的分支屈曲行为特征,而其临界屈曲热载荷值均会随着孔隙率系数的增加而单调增加．非对称材料模型下,固支梁仍显示出分支屈曲行为特征,但其临界屈曲热载荷不再随着孔隙率系数的变化而单调变化;而对于两端简支梁,发生了弯曲变形,弯曲挠度随载荷的增大而增大．     

???????????????????????о?

一定长度的薄壁构件在纵向或横向荷载作用下，未达到材料极限破坏前就有 可能发生弹性弯扭屈曲失稳的问题. 分析了工字型截面悬臂钢梁的此类问题，应用平衡 法和能量法导出构件在轴向和横向荷载作用下的弹性弯扭屈曲微分方程，利用里兹法求其临 界载荷，并确定截面固定时的极限特征长度.     

Enhancing flutter and buckling capacity of column by piezoelectric layers

This paper illustrates the use of a pair of piezoelectric layers in increasing the flutter and buckling capacity of a column subjected to a follower force. The column is fixed at one end while the other one is free to rotate but constrained transversely by a spring. The mathematical formulation is presented and solved numerically. The effect of the spring stiffness on the capacity and type of instability of the column is first illustrated numerically for the case without any piezoelectric actuators. A transition value for the stiffness can be identified, below which the column fails by flutter and above which the column buckles. Next, an external voltage is applied on the piezoelectric layers bonded on the surfaces of the column, which induces locally a pair of tensile follower force. This has the effect of increasing the capacity of the column as the voltage increases while the transition stiffness remains virtually unchanged for a given size and location of piezoelectric actuators. It is also shown that the capacity of the column increases with longer layers for a fixed voltage. However, the location of the layers along the column determines the transition stiffness and hence has an effect on the type of failure for a fixed spring constant. Positioning towards the fixed end increases the flutter capacity whereas positioning away will result in an increase in buckling capacity.     

横向载荷作用下轴向运动梁的屈曲失稳以及非线性振动特性

梁的轴向运动会诱发其产生横向振动并可能导致屈曲失稳,对结构的安全性和可靠性产生重大的影响。本文重点研究了横向载荷作用下轴向运动梁的屈曲失稳及横向非线性振动特性。基于Hamilton变分原理,建立了横向载荷作用下轴向运动梁的动力学方程,获得了梁的后屈曲构型。使用截断Galerkin法,将控制方程改写成Duffing方程的形式。用同伦分析方法确定载荷作用下轴向运动梁的非线性受迫振动的封闭形式的表达式。结果表明,后屈曲构型对轴向速度和初始轴向应力有明显的依赖性。通过同伦分析法得出非线性基频的显式表达式,获得了初始轴向力会影响非线性频率随初始振幅和轴向速度的线性关系。另外,轴向外激励的方向也会改变系统固有频率。     

Buckling of short beams with warping effect included

A beam theory for the stability analysis of short beam that includes shear deformation and warping of the cross-section is developed. The warping of the cross-section is taken to be an independent kinematics quantity and corresponding force resultants are defined. For the beam subjected to the external loading only at the ends of the beam, equilibrium equations have been obtained by the principle of virtual work. The variations of lateral displacement, rotational angle of the cross-section and the multiplier of the warping shape along the beam axis are solved in closed form and expressed in terms of deformation quantities at the ends of the beam. Based on this beam theory, the lateral stiffness of the beam sustained an axial compression force and a lateral shear force at one end is explicitly derived, from which the equation of the buckling load is established and the buckling load can be solved. When the effect of cross-section warping is neglected, the derived lateral stiffness and buckling load converge to the solutions of the Haringx theory.     

光伏支架柱平面内有侧移失稳计算长度系数研究

光伏支架是一种典型的不等高单层框架,有侧移失稳的光伏支架柱计算长度系数需考虑多方面因素的影响,无法直接套用现有规范公式．综合考虑了光伏支架短柱和长柱的刚度比γ、短柱和长柱的高度比β以及梁柱线刚度比K1的影响,进行了理论推导,得出了不等高单层框架柱有侧移失稳计算长度系数的计算公式,并制作表格以便工程人员查阅使用．然后以某典型光伏支架实际工程为算例,建立了有限元数值分析模型,并分别进行了线性屈曲分析和考虑几何非线性以及材料非线性的极限承载力分析．分析结果表明,提出的理论公式和计算表格能够精确地计算光伏支架有侧移失稳的极限承载力．     

简支梁大挠度弹性后屈曲载荷与变形的优化算法

针对简支梁结构大挠度后屈曲载荷与变形的计算问题,本文提出了一种直接求解其后屈曲载荷和变形的优化算法。在简支梁处于大挠度屈曲平衡状态下,将梁结构划分为有限子段,以待求后屈曲载荷为设计变量,根据起点的边界条件和每个子段满足的弯矩变形公式,累积计算出其他各个节点的坐标,以得到的终点坐标满足的边界条件构建目标函数模型。在此基础上,通过MATLAB编制优化程序分析了两个典型算例,并将理论结果与相关软件的计算结果进行对比,从而证明了本文算法的正确性。本文算法求解过程简单、快速,具有一定的实用性,为变截面结构大挠度弹性屈曲稳定性问题的研究提供了参考。     

The influence of multiple cracks on tensile and compressive buckling of shear deformable beams

In this work the static stability of the uniform Timoshenko column in presence of multiple cracks, subjected to tensile or compressive loads, is analyzed. The governing differential equations are formulated by modeling the cracks as concentrated reductions of the flexural stiffness, accomplished by the use of Dirac’s delta distributions. The adopted model has allowed the derivation of the exact buckling modes and the corresponding buckling load equations of the Timoshenko multi-cracked column, as a function of four integration constant only, which are derived simply by enforcing the end boundary conditions, irrespective of the number of concentrated damage. Since shear deformability has been taken into account, the buckling load equation allows capturing both compressive and tensile buckling. The latter phenomenon has been recently investigated with reference to rubber bearing isolators, modeled as short beams, but it has been shown to occur also in slender beams characterized by high distributed shear deformation, like composite and layered beams. The influence of multiple concentrated cracks on the stability of shear deformable beams, particularly under the action of tensile loads, has never been assessed in the literature and is here addressed on the basis of an extensive parametric analysis. All the reported results have been compared with the Euler multi-cracked column in order to highlight its limits of applicability.     

Creep buckling of cross-ply symmetric laminated cylindrical panels

A creep buckling analysis of cross-ply symmetric laminated cylindrical panels is given in this paper.By means of theoretical analysis,a method to determine the critical load of creep buckling of the panels with simply supported boundary conditons is obtained.     

Experimental and theoretical analysis of the transverse vibrations of a beam having bilinear support

Experimental and theoretical investigations have been conducted to study the transverse vibrations of a beam having nonlinear constraint. One end of the beam is fixed while the other is supported on a bilinear spring and carries a concentrated mass. Free-vibration curves, obtained for different values of the spring constants and the end mass, indicate that free periodic vibrations with frequencies which can lie within any one of an infinite number of ranges may occur. Forced harmonic response may exhibit the multiplicity of jump phenomena within the frequency ranges of free vibrations.     

Thermal buckling and post-buckling of pinned–fixed Euler–Bernoulli beams on an elastic foundation

In this article, both thermal buckling and post-buckling of pinned–fixed beams resting on an elastic foundation are investigated. Based on the accurate geometrically non-linear theory for Euler–Bernoulli beams, considering both linear and non-linear elastic foundation effects, governing equations for large static deformations of the beam subjected to uniform temperature rise are derived. Due to the large deformation of the beam, the constraint forces of elastic foundation in both longitudinal and transverse directions are taken into account. The boundary value problem for the non-linear ordinary differential equations is solved effectively by using the shooting method. Characteristic curves of critical buckling temperature versus elastic foundation stiffness parameter corresponding to the first, the second, and the third buckling mode shapes are plotted. From the numerical results it can be found that the buckling load-elastic foundation stiffness curves have no intersection when the value of linear foundation stiffness parameter is less than 3000, which is different from the behaviors of symmetrically supported (pinned–pinned and fixed–fixed) beams. As we expect that the non-linear foundation stiffness parameter has no sharp influence on the critical buckling temperature and it has a slight effect on the post-buckling temperature compared with the linear one.     

一维六方准晶层合简支梁自由振动与屈曲的精确解

伪Stroh型公式能够将多场耦合材料的控制方程转化为线性特征系统来求解,从而获得多层结构简支边界条件的精确解.本文利用伪Stroh型公式,研究一维六方准晶层合简支梁的自由振动和屈曲问题,通过传递矩阵法,获得准晶层合梁自由振动固有频率与临界屈曲载荷的精确解.通过与已有梁的剪切变形理论结果比较,验证了本文伪Stroh型公式的正确性和有效性.通过数值算例,分析由两种不同准晶材料组成的三明治层合梁的叠层方式、高跨比、层厚比及层数对梁的固有频率、临界屈曲载荷及其模态的影响规律.结果表明,叠层顺序和梁的高跨比、层厚比对准晶层合梁的自由振动固有频率和临界屈曲载荷有很大影响,可通过调整梁的几何尺寸和叠层顺序得到准晶层合梁的最佳固有频率和临界屈曲载荷.本文给出的精确解可为工程上研究准晶梁的各种数值解法和实验方法提供理论参考.