Phase equilibria of (water + levulinic acid + dibasic esters) ternary systems

Liquid–liquid equilibrium (LLE) data of the solubility (binodal) curves and tie-line end compositions were examined for mixtures of {(water (1) + levulinic acid (2) + dimethyl succinate or dimethyl glutarate or dimethyl adipate (3)} at 298.15 K and 101.3 ± 0.7 kPa. The reliability of the experimental tie-line data was confirmed by using the Othmer–Tobias correlation. The LLE data of the ternary systems were predicted by UNIFAC method. The LLE data were correlated fairly well with UNIQUAC and NRTL models, indicating the reliability of the UNIQUAC and NRTL equations for these ternary systems. The best results were achieved with the NRTL equation, using non-randomness parameter (α = 0.3) for the correlation. Distribution coefficients and separation factors were measured to evaluate the extracting capability of the solvents.     

(Liquid + liquid) equilibria of (water + propionic acid + cyclohexanone) at several temperatures

(Liquid + liquid) equilibrium (LLE) data for (water + propionic acid + cyclohexanone) were measured under atmospheric pressure and at T = (293.2, 298.2 and 303.2) K. Phase diagrams were obtained by determining solubility and tie-line data. The LLE data of the ternary systems were predicted by UNIFAC method. Distribution coefficients and separation factors were evaluated over the immiscibility regions.     

Liquid-liquid equilibria of (water + butyric acid + diethyl succinate or diethyl glutarate or diethyl adipate) ternary systems

Liquid-liquid equilibrium (LLE) data of the solubility (binodal) curves and tie-line end compositions were examined for mixtures of {(water (1) + butyric acid (2) + diethyl succinate or diethyl glutarate or diethyl adipate (3)} at 298.2 K and 101.3 ± 0.7 kPa. The relative mutual solubility of butyric acid is higher in the diethyl succinate or diethyl glutarate or diethyl adipate layers than water layers. The consistency of the experimental tie-lines was determined through the Othmer-Tobias correlation equation. The LLE data were correlated with NRTL model, indicating the reliability of the NRTL equations for these ternary systems. The best results were achieved with the NRTL equation, using non-randomness parameter (α = 0.3) for the correlation. Distribution coefficients and separation factors were measured to evaluate the extracting capability of the solvents.     

Liquid + liquid equilibria for the quaternary systems of (water + acetic acid + mixed solvent) at 298.2 K and atmospheric pressure

Liquid–liquid equilibrium (LLE) data for the quaternary systems of [water + acetic acid + mixed solvent (dipropyl ether + diisopropyl ether)] were measured at 298.2 K and atmospheric pressure, using various compositions of mixed solvent. Binodal curves and tie-lines for the quaternary systems have been determined in order to investigate the effect of solvent mixture, dipropyl ether (DPE) and diisopropyl ether (IPE), on extracting acetic acid from aqueous solution. A comparison of the extracting capabilities of the mixed solvents was made with respect to distribution coefficients, separation factors, and solvent free selectivity bases. Reliability of the data was confirmed by using the Othmer–Tobias and Hand plots. The tie-lines were also correlated using the UNIFAC model. The average root-mean-square deviations between the observed and calculated mass fractions for the studied systems were in the range of 10–14%.     

(Liquid + liquid) equilibria of the quaternary system methanol + isooctane + cyclohexane + benzene at T = 303.15 K

Tie line data of the ternary system {methanol + isooctane + cyclohexane} were obtained at T = 303.15 K. A quaternary system containing these three compounds and benzene was also studied at the same temperature, while data for {methanol + benzene + cyclohexane} and {methanol + benzene + isooctane} were taken from literature. In order to obtain the binodal surface of the quaternary system, four quaternary sectional planes with several cyclohexane/isooctane ratios were studied. The distribution of benzene between both phases was also analysed. Ternary experimental results were correlated with the UNIQUAC and NRTL equations and compared with predictions using the UNIFAC group contribution method.     

(Liquid + liquid) equilibria of (water + propionic acid + alcohol) ternary systems

(Liquid + liquid) equilibrium (LLE) data of the solubility (binodal) curves and tie-line end composition were examined for mixtures of {water (1) + propionic acid (2) + octanol or nonanol or decanol or dodecanol (3)} at T = 298.15 K and 101.3 ± 0.7 kPa. The reliability of the experimental tie-line data was confirmed by using the Othmer-Tobias correlation. The LLE data of the ternary systems were predicted by UNIFAC method. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

Phase equilibria in ternary aqueous mixtures of 1,3-butanediol with 2-ethyl-1-hexanol at T = (298.2, 303.2 and 308.2) K

Experimental tie-line data for ternary system of (water + 1,3-butanediol (1,3-BD) + 2-ethyl-1-hexanol (2EH)) were determined at T = (298.2, 303.2 and 308.2) K under atmospheric conditions. This ternary system exhibits type-1 behavior of LLE. The experimental ternary LLE data were correlated using the NRTL model, and the binary interaction parameters were obtained. The average root-mean-square deviation between the observed and calculated mole fractions was 1.38%. Distribution coefficient and separation factor were measured to evaluate the extracting capability of the solvent. The separation factor values for the solvent used in this work were then compared with literature values obtained in our previous works for other butanediols.     

Excess molar enthalpies of methylformate + (1-propanol, 2-propanol, 1-butanol, 2-butanol and 1-pentanol) at T = 298.15 K, p = (5.0, 10.0) MPa, and methylformate + 1-propanol at T = 333.15 K, p = 10.0 MPa

A high pressure flow-mixing isothermal calorimeter is used to determine the excess molar enthalpies of methylformate + (1-propanol, 2-propanol, 1-butanol, 2-butanol and 1-pentanol) at T = 298.15 K and p = (5.0, 10.0) MPa, and methylformate + 1-propanol at T = 333.15 K and p = 10.0 MPa. The Redlich-Kister equation is fit to the experimental results.     

Phase equilibria of liquid (water + butyric acid + oleyl alcohol) ternary system

(Liquid + liquid) equilibrium (LLE) data for the ternary system of (water + butyric acid + oleyl alcohol) at T = (298.15, 308.15, and 318.15) K are reported. Complete phase diagrams were obtained by determining solubility and the tie-line data. The reliability of the experimental tie lines was confirmed by using Othmer-Tobias correlation. The UNIFAC method was used to predict the phase equilibrium data. The phase diagrams for the ternary mixtures including both the experimental and correlated tie lines are presented. Distribution coefficients and separation factors were evaluated for the immiscibility region. A comparison of the solvent extracting capability was made with respect to distribution coefficients, separation factors, and solvent-free selectivity bases for T = (298.15, 308.15, and 318.15) K. It is concluded that oleyl alcohol may serve as an adequate solvent to extract butyric acid from its dilute aqueous solutions.     

Liquid-liquid equilibria for mixtures of (ethylene carbonate + aromatic hydrocarbon + cyclohexane)

Liquid-liquid equilibrium data for mixtures of (ethylene carbonate + benzene + cyclohexane) at temperatures 303.15 and 313.15 K and (ethylene carbonate + BTX + cyclohexane) at temperature 313.15 K are reported, where the BTX is benzene, toluene and m-xylene. The compositions of liquid phases at equilibrium were determined by gas liquid chromatography. The selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene, toluene and m-xylene from (ethylene carbonate + BTX + cyclohexane) are calculated and presented. The obtained results are compared with the selectivity factors and partition coefficients of ethylene carbonate for the extraction of benzene from (ethylene carbonate + benzene + cyclohexane). The liquid-liquid equilibrium data were correlated with the UNIQUAC and NRTL activity coefficient models. The phase diagrams for the studied mixtures are presented and the correlated tie line results have been compared with the experimental data. The comparisons indicate the applicability of the UNIQUAC and NRTL activity coefficients model for liquid-liquid equilibrium calculations of the studied mixtures. The tie line data of the studied mixtures also were correlated using the Hand method.     

Determination and correlation of liquid–liquid equilibria for the (water + carboxylic acid + dimethyl maleate) ternary systems at T = 298.2 K

(Liquid–liquid) equilibrium (LLE) data for the ternary systems of {water + carboxylic acid (formic, acetic, propionic or butyric acid) + dimethyl maleate} were measured at T = 298.2 K and atmospheric pressure. Selectivity values for solvent separation efficiency were derived from the tie-line data. A comparison of the extracting capabilities of the solvent was made with respect to distribution coefficients, separation factors, and solvent-free selectivity bases. The reliability of the data was ascertained from Othmer–Tobias plots. The experimental data were correlated using the UNIQUAC and NRTL (α = 0.2) equations, and the binary interaction parameters were reported. The phase diagrams for the ternary mixtures including both the experimental and calculated tie-lines were presented.     

Physical properties of 3-methyl-N-butylpyridinium tricyanomethanide and ternary LLE data with an aromatic and an aliphatic hydrocarbon at T = (303.2 and 328.2) K and p = 0.1 MPa

Several physical properties were determined for the ionic liquid 3-methyl-N-butylpyridinium tricyanomethanide ([3-mebupy]C(CN)₃): liquid density, viscosity, surface tension, thermal stability and heat capacity in the temperature range from (283.2 to 363.2) K and at 0.1 MPa. The density and the surface tension could well be correlated with linear equations and the viscosity with a Vogel-Fulcher-Tamman equation. The IL is stable up to a temperature of 420 K.Ternary data for the systems {benzene + n-hexane, toluene + n-heptane, and p-xylene + n-octane + [3-mebupy]C(CN)₃} were determined at T = (303.2 and 328.2) K and p = 0.1 MPa. All experimental data were well correlated with the NRTL model. The experimental and calculated aromatic/aliphatic selectivities are in good agreement with each other.     

Isothermal vapor-liquid equilibrium at T = 333.15 K and excess volumes and molar refractivity deviation at T = 298.15 K for the ternary mixtures {di-methyl carbonate (DMC) + ethanol + benzene} and {DMC + ethanol + toluene}

Isothermal vapor-liquid equilibrium data at 333.15 K are reported for the ternary systems {di-methyl carbonate (DMC) + ethanol + benzene} and {DMC + ethanol + toluene} as determined with headspace gas chromatography. The experimental ternary vapor-liquid equilibrium (VLE) data were correlated with different activity coefficient models. The excess volume (V^E) and deviations in molar refractivity (ΔR) data are reported for the binary systems {DMC + benzene} and {DMC + toluene} and also for the ternary systems {DMC + ethanol + benzene} and {DMC + ethanol + toluene} at 298.15 K. These V^E and ΔR data were correlated with the Redlich-Kister equation for binary systems and the Cibulka equation for ternary systems.     

Investigation on isobaric vapor liquid equilibrium for acetic acid + water + (n-propyl acetate or iso-butyl acetate)

Isobaric vapor-liquid equilibrium (VLE) data for acetic acid + water, acetic acid + n-propyl acetate, acetic acid + iso-butyl acetate, acetic acid + water + n-propyl acetate, acetic acid + water + iso-butyl acetate are measured at 101.33 kPa with a modified Rose still. The nonideal behavior in vapor phase caused by the association of acetic acid are corrected by the chemical theory and Hayden-O’Connell method, and analyzed by calculating the second virial coefficients and apparent fugacity coefficients. The VLE data for acetic acid + water, acetic acid + n-propyl acetate, and acetic acid + iso-butyl acetate are correlated through the NRTL and UNIQUAC models using the nonlinear least square method. The obtained NRTL model parameters are used to predict the ternary VLE data. The ternary predicted values obtained in this way agree well with the experimental values.     

Experimental measurement and thermodynamic modeling of liquid-liquid equilibrium for 1-pentanol + water + NaNO3 at 298.15 and 308.15 K

Experimental measurements have been performed for liquid-liquid equilibria in aqueous systems containing 1-pentanol and sodium nitrate at temperatures of 298.15 and 308.15 K and at atmospheric pressure. The results have been modeled using the extended UNIQUAC model and also a modified version of this model. Relevant model parameters have been adjusted using the experimental data. Both models are capable of correlating the experimental data with an average deviation of less than 0.8 weight percent, with the modified model producing slightly better results. The predictive nature of the models has also been verified.     

Molar excess enthalpies of ethyl acetate + alkanols at T = 298.15 K, p = 10.0 MPa

A commercial flow-mixing isothermal calorimeter was tested by measuring heat of mixing curves for exothermic, endothermic, S-shaped and double minimum molar excess enthalpy mixtures at high pressure. The results show this calorimeter is able to produce good quality data. Molar excess enthalpies for ethyl acetate mixed with a series of simple alkanols were measured at T = 298.15 K and p = 10 MPa.     

Ternary (liquid + liquid) equilibria of the azeotrope (ethyl acetate + 2-propanol) with different ionic liquids at T = 298.15 K

Experimental (liquid + liquid) equilibria involving ionic liquids {1,3-dimethylimidazolium methyl sulfate (MMIM MeSO₄)}, {2-propanol + ethyl acetate + 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM PF₆)} and {2-propanol + ethyl acetate + 1-hexyl-3-methylimidazolium hexafluorophosphate (HMIM PF₆)} were carried out to separate the azeotropic mixture ethyl acetate and 2-propanol. Selectivity and distribution ratio values, derived from the tie-lines data, were presented in order to analyze the best separation solvent in a liquid extraction process. Experimental (liquid + liquid) equilibria data were compared with the correlated values obtained by means of the NRTL, Othmer-Tobias and Hand equations. These equations were verified to accurately correlate the experimental data.     

Solubilities of betulin in chloroform + methanol mixed solvents at T = (278.2, 288.2, 293.2, 298.2, 308.2 and 313.2) K

Experimental solubilities of betulin in mixed solvents of chloroform (1) + methanol (2) were determined at T = (278.2, 288.2, 293.2, 298.2, 308.2 and 313.2) K. The solubilities of betulin in mixed solvents of chloroform (1) + methanol (2) increase with increasing of temperature. The curves of solubility versus solvent composition on solute-free basis went through a maximum. Experimental data of solubilities were correlated with a three-parameter equation. In addition, three crystals of betulin obtained in different compositions of chloroform (1) + methanol (2) mixtures were characterized by scanning electron microscope (SEM) and differential scanning calorimetry (DSC).     

Phase equilibria of (water-carboxylic acid-diethyl maleate) ternary liquid systems at 298.15 K

Liquid-liquid equilibrium (LLE) data for the ternary systems of (water-formic acid-diethyl maleate), (water-acetic acid-diethyl maleate), (water-propionic acid-diethyl maleate), (water-butyric acid-diethyl maleate), and (water-valeric acid-diethyl maleate) were investigated at 298.15 K and atmospheric pressure. Complete phase diagrams were obtained by determining solubility and the tie-line data. The tie-line data were compared with the results predicted by the UNIFAC and the modified UNIFAC (Dortmund) methods and correlated by means of UNIQUAC model. The reliability of the experimental tie-line data was confirmed by using the Othmer-Tobias correlation. Distribution coefficients and selectivity were evaluated for the immiscibility region.     

Design and construction of an adiabatic calorimeter for samples of less than 1 cm in the temperature range T = 15 K to T = 350 K

A small-scale adiabatic calorimeter has been constructed as part of a larger project to study the thermodynamics of nanomaterials and to facilitate heat capacity measurements on samples of insufficient quantity to run on our current large-scale adiabatic apparatus. This calorimeter is designed to measure the heat capacity of samples whose volume is less than 0.8 cm³ over a temperature range of T = 13 K to T = 350 K. Heat capacity results on copper, sapphire, and benzoic acid show the accuracy of the measurements to be better than ±0.4% for temperatures higher than T = 50 K. The reproducibility of these measurements is generally better than ±0.25%.