Cyclic alkylene carbonates. Experiment and first principle calculations for prediction of thermochemical properties

The standard molar enthalpies of formation of ethylene carbonate, propylene carbonate, and butylene carbonate were measured using combustion calorimetry. Ab initio calculations of molar enthalpies of formation of alkylene carbonates were performed using the G3MP2 method. The calculated values are in excellent agreement with available experimental data. Ring strain corrections were quantified for the refinement of the group-contribution method for prediction of enthalpies of formation and vaporization of alkylene carbonates.     

Thermodynamic properties of lithium mica: Lepidolite

Calorimetric measurements were made on natural sample of lepidolite having the composition (K_0.80Na_0.05Ca_0.07Rb_0.16Cs_0.03)(Li_1.34Al_1.40Fe³⁺_0.01)[Si_3.25Al_0.75O₁₀]F_1.80(OH)_0.20 from Na-Li-type rare-element-rich pegmatites of East Sayany, Russia. High-temperature enthalpy increments were measured with a Tian-Calvet calorimeter at 444-972 K using the drop method. The resultant (T) equation in the interval T = 298.15-972 K was calculated:  = 316.10 + 228.12 × 10⁻³ T − 50.10 × 10⁵ T⁻² (J K⁻¹ mol⁻¹) [± 0.4%] and the value of (298.15 K) = 327.8 J K⁻¹ mol⁻¹ was obtained. The standard molar enthalpy of formation from the elements was determined by high-temperature drop solution calorimetry in molten lead borate at T = 973 K. The value of Δ_f(298.15 K) for lepidolite was found to be −6201 ± 18 kJ mol⁻¹. The thermodynamic properties of lepidolite of idealized composition KLi_1.5Al_1.5[Si₃AlO₁₀]F₂ were estimated based on the experimental data obtained.     

Thermochemical study of two anhydrous polymorphs of caffeine

The mean values of the standard massic energy of combustion of caffeine in phase I (or alpha) and in phase II (or beta) measured by static-bomb combustion calorimetry in oxygen, at T = 298.15 K, are Δ_cu^° (C₈H₁₀O₂N₄, I) = −(21823.27 ± 0.68) J · g⁻¹ and Δ_cu^° (C₈H₁₀O₂N₄, II) = −(21799.96 ± 1.08) J · g⁻¹, respectively.The standard (p^° = 0.1 MPa) molar enthalpy of formation in condensed phase for each form was derived from the corresponding standard molar enthalpies of combustion as, and .The difference between the standard enthalpy of formation of the two polymorphs in condensed phase was also evaluated by using reaction-solution calorimetry. The obtained result, 2.04 ± 0.25 kJ · mol⁻¹, is in agreement, within the uncertainty, with the difference between the molar enthalpies of formation obtained from combustion experiments (4.5 ± 3.2) kJ · mol⁻¹, which can be considered as an internal test for consistency of the results.A value for the standard enthalpy of formation of caffeine in the gaseous state was proposed: , estimated from the values of the standard enthalpies of formation of both crystalline forms obtained in this work, and the data on standard enthalpies of sublimation collected from the literature.     

Accurate thermochemistry from quantum chemical calculations?

The answer to the title question is definitely “yes” – at least for fairly small molecules. Computational procedures, namely the Weizmann (Wn) and Gaussian-3 (G3) family of methods, the complete basis set extrapolation scheme (CBS-x), the “high accuracy extrapolated ab initio thermochemistry” (HEAT) as well as the “correlation consistent composite approach” (ccCA), aimed at energies with chemical accuracy or even better (sub kJ?mol^?1) are described and several applications illustrating the level of accuracy that can be achieved are presented.     

Thermodynamic properties of xanthone: Heat capacities,phase-transition properties,and thermodynamic-consistency analyses using computational results

Heat capacities and phase-transition properties for xanthone (IUPAC name 9H-xanthen-9-one and Chemical Abstracts registry number [90-47-1]) are reported for the temperature range 5 < T/K < 524. Statistical calculations were performed and thermodynamic properties for the ideal gas were derived based on molecular geometry optimization and vibrational frequencies calculated at the B3LYP/6-31+G(d,p) level of theory. These results are combined with sublimation pressures from the literature to allow critical evaluation of inconsistent enthalpies of sublimation for xanthone, also reported in the literature. Literature values for the enthalpy of combustion of xanthone are re-assessed, a revision is recommended for one result, and a new value for the enthalpy of formation of the ideal gas is derived. Comparisons with thermophysical properties reported in the literature are made for all other reported and derived properties, where possible.     

Correlations between MO eigenvectors and enthalpies of formation for simple organic substances

Bondingness, originally used in a qualitative analysis of the barrier to rotation in ethane, has been used to model Δ_fH° (g) for simple organic substances. The model is parameterised with a set of 345 molecules including alkanes, alkenes, alkynes, alcohols, ethers, aldehydes, ketones, carboxylic acids, esters, alkenoates, amines, amides, diazenes, nitriles, nitroalkanes, nitrates, thiols and benzenoids. The model is compared with a current empirical scheme as well as a comparison of variations of the model using different simple steric potentials. Using bondingness and the most approximate quantum chemical models a model can be formulated that is comparable with empirical group methods but requiring less parameters.     

Thermochemistry of uracil and thymine revisited

Thermochemical properties of uracil and thymine have been evaluated using additional experiments. Standard (p⁰ = 0.1 MPa) molar enthalpies of formation in the gas phase at T = 298.15 K for uracil −(298.1 ± 0.6) and for thymine −(337.6 ± 0.9) kJ · mol⁻¹ have been derived from energies of combustion measured by static bomb combustion calorimetry and molar enthalpies of sublimation determined using the transpiration method. The G3 and G4 quantum-chemical methods were used for calculations of theoretical gaseous enthalpies of formation being in very good agreement with the re-measured experimental values.     

The influence of the ligand structure on activation of hafnocene polymerization catalysts: A theoretical study

The influence of ligand structure of hafnocenes on activation of the polymerization catalysts has been studied by quantum chemical methods. Altogether 54 hafnocenes were included in the analysis, supplemented by four zirconocenes for comparison. The trends in structural and electronic parameters relevant in the catalyst activation step were studied for the dichloride, dimethyl and cationic monomethyl forms of the catalysts. The effects of ligand modifications were analyzed as functions of the metal, ancillary cyclopentadienyl-based ligand, ligand substituent and the ligand bridge, making comparisons to experimental data. Generally, large aromatic ligands together with electron donating ligand substituents stabilize the catalytically active species, thus facilitating the catalyst activation process. The obtained trends are expected to aid in the development of new high-performance polymerization catalysts.     

Thermochemical study of the isomeric compounds: 3-acetylbenzonitrile and benzoylacetonitrile

The standard (p° = 0.1 MPa) molar enthalpies of formation of 3-acetylbenzonitrile and benzoylacetonitrile, in the crystalline phase, were derived from the respective standard massic energies of combustion measured by static bomb combustion calorimetry, in oxygen, at T = 298.15 K. The standard molar enthalpies of sublimation, at T = 298.15 K, were measured by Calvet microcalorimetry. From the above experimentally determined enthalpic parameters, the standard molar enthalpies of formation in the gaseous phase, at T = 298.15 K, are found to be: (52.4 ± 2.1) kJ · mol⁻¹ and (74.8 ± 2.5) kJ · mol⁻¹ for 3-acetylbenzonitrile and benzoylacetonitrile, respectively.Molecular structures were computed using highly accurate ab initio techniques. Standard molar enthalpies of formation of the experimentally studied compounds were derived using an appropriate set of working reactions. Very good agreement between the calculated and the experimental values was obtained, so the calculations were extended to the estimates of the standard molar enthalpies of formation of 2- and 4-acetylbenzonitriles whose study was not performed experimentally.Our results were further interpreted and rationalized in terms of the enthalpic stability and compared to other relevant disubstituted benzenes.     

Standard molar enthalpies of formation of 2-, 3- and 4-cyanobenzoic acids

The standard (p = 0.1 MPa) molar enthalpies of formation of 2-, 3- and 4-cyanobenzoic acids were derived from their standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by static bomb combustion calorimetry. The Calvet high temperature vacuum sublimation technique was used to measure the enthalpies of sublimation of 2- and 3-cyanobenzoic acids. The standard molar enthalpies of formation of the three compounds, in the gaseous phase, at T = 298.15 K, have been derived from the corresponding standard molar enthalpies of formation in the condensed phase and standard molar enthalpies for phase transition. The results obtained are −(150.7 ± 2.0) kJ · mol⁻¹, −(153.6 ± 1.7) kJ · mol⁻¹ and −(157.1 ± 1.4) kJ · mol⁻¹ for 2-cyano, 3-cyano and 4-cyanobenzoic acids, respectively. Standard molar enthalpies of formation were also estimated by employing two different methodologies: one based on the Cox scheme and the other one based on several different computational approaches. The calculated values show a good agreement with the experimental values obtained in this work.     

Theoretical spectroscopy and metastability of BeS and its cation

Multiconfiguration self-consistent field and multiconfiguration reference interaction including the Davidson’s correction techniques were employed to calculate the potential energy curves (PECs) of the BeS/BeS⁺ electronic states correlating to the 4/5 lowest dissociation limits. After nuclear motion treatment, we deduced reliable spectroscopic data for the neutral and cationic bound states. For BeS, the transition moments and spin-orbit couplings were also evaluated and used later with the PECs to deduce the rovibronic transition probabilities and the radiative lifetimes in the low-lying states, and to investigate the unimolecular decomposition processes of BeS (X¹Σ⁺, A¹Π, ³Σ⁺ and B¹Σ⁺) leading to Be(¹S_g) + S(³P_g). The prominent mechanism is a spin-orbit induced predissociation via the repulsive BeS(1³Σ⁻) state. Finally, we give the single ionization spectrum of BeS (X¹Σ⁺) populating the BeS⁺ (X²Π, 1²Σ⁻, 1²Σ⁺, 1²Δ, 2²Σ⁺, 2²Π and 3²Π) electronic states. The adiabatic ionisation energy of BeS is estimated to be ∼9.15 eV.     

New type dithiolene complex based on 4,5-(1,4-dioxane-2,3-diyldithio)-1,3-dithiol ligand: Synthesis,experimental and theoretical investigation

A new Nickel complex with an extended multisulfur dithiolene ligand Ni(edodddt)₂ (edodddt = 2,3,4α,8α-tetrahydro-dithiine [2,3-b] [1,4] dioxo-6,7-dithiolene) has been synthesized and characterized by electrochemical measurements, IR, UV–Vis and NMR spectroscopy. Its crystal structure was resolved by X-ray diffraction on a single crystal. DFT calculations were made in order to compare the results with the experimental findings and gain an insight of the properties of this new dithiolene complex.     

Thermochemistry of aromatic ketones. Experimental enthalpies of formation and structural effects

The standard enthalpies of formation Δ_fH^o (liq. or cr.) at the temperature T = 298.15 K were measured using combustion calorimetry for benzophenone (A), 1-indanone (B), -tetralone (C), 9-fluorenone (D), anthrone (E) and dibenzosuberone (F). The standard enthalpies of vaporization Δ_vH^o or sublimation Δ_sH^o of A-F and 5,7-dihydro-6H-dibenzo[a,c]cyclohepten-6-one (G) were obtained from the temperature function of the vapor pressure measured in a flow system. Enthalpies of fusion Δ_mH of solid compounds were measured by DSC. From the enthalpies of formation of the gaseous compounds of A-G the values of their strain enthalpies were derived and structural effects discussed.

     

Thermochemical properties of 4-N,N-dialkylamino-7-nitrobenzofurazan derivatives (alkyl = methyl,ethyl)

The standard (p° = 0.1 MPa) molar enthalpies of formation, at T = 298.15 K, in the gaseous phase, for two nitrobenzofurazan derivatives, 4-N,N-dimethylamino-7-nitrobenzofurazan (DMANBF) and 4-N,N-diethylamino-7-nitrobenzofurazan (DEANBF), were derived from their enthalpies of combustion and sublimation, obtained by static bomb calorimetry and by the Knudsen effusion technique, respectively. The results are compared with the corresponding data calculated by the G3(MP2)//B3LYP approach. Computationally, the molecular structures of both compounds were established and the geometrical parameters were determined at the B3LYP/6-31G(d) level of theory.     

Conformational study of lanthanide(III) complexes of N-(2-salicylaldiminatobenzyl)-1-aza-18-crown-6 by using X-ray and ab initio methods

A structural study of lanthanide complexes with the deprotonated form of the monobracchial lariat ether N-2-salicylaldiminatobenzyl-aza-18-crown-6 (L⁴) (Ln = La(III)–Tb(III)) is presented. Attempts to isolate complexes of the heaviest members of the lanthanide series were unsuccessful. The X-ray crystal structures of [Pr(L⁴)(H₂O)](ClO₄)₂ · H₂O · C₃H₈O and [Sm(L⁴)(H₂O)](ClO₄)₂ · C₃H₈O show the metal ion being bound to the eight donor atoms of the ligand backbone. Coordination number nine is completed by the oxygen atom of an inner-sphere water molecule. Two different conformations of the crown moiety (labelled as A and B) are observed in the solid state structure of the Pr(III) complex, while for the Sm(III) complex only conformation A is observed. The complexes were also characterized by means of theoretical calculations performed in vacuo at the HF level, by using the 3-21G^∗ basis set for the ligand atoms and a 46 + 4fⁿ effective core potential for lanthanides. The optimized geometries of the Pr(III) and Sm(III) complexes show an excellent agreement with the experimental structures obtained from X-ray diffraction studies. The calculated relative energies of the A and B conformations for the different [Ln(L⁴)(H₂O)]²⁺ complexes (Ln = La, Pr, Sm, Ho or Lu) indicate a progressive stabilization of the A conformation with respect to the B one upon decreasing the ionic radius of the Ln(III) ion. For the [Ln(L⁴)(H₂O)]²⁺ systems, most of the calculated bond distances between the metal ion and the coordinated donor atoms decrease along the lanthanide series, as usually observed for Ln(III) complexes. However, our ab initio calculations provide geometries in which the Ln–O(5) bond distance [O(5) is an oxygen atom of the crown moiety] increases across the lanthanide series from Sm(III) to Lu(III).     

Standard enthalpy of formation of lithium diphosphate

Lithium carbonate (Li₂CO₃) and ammonium dihydrogen phosphate (NH₄H₂PO₄) were used for synthesizing lithium diphosphate (Li₄P₂O₇). The purity of the latter compound was checked up by X-ray diffraction. The heat of dissolution of (Li₄P₂O₇) in phosphoric acid solution was measured in a C-80 SETARAM calorimeter. Many dilution and mixing processes in acid solutions of several concentrations (w/w) H₃PO_4, were also realized in the calorimeter in order to get the standard enthalpy of formation of this product. Two thermochemical cycles were investigated and the obtained values for the enthalpy of formation are: (−3383.4 and −3147) kJ · mol⁻¹. The former one is in better agreement with literature data.     

Synthesis, spectroscopic and structural properties of CF3SO2OCCl3

Trichloromethyl trifluoromethanesulphonate, CF₃SO₂OCCl₃, was prepared by quantitative reaction between Ag(CF₃SO₂O) and BrCCl₃. The conformational and structural properties of the gaseous molecule were studied by vibrational spectroscopy (IR (gas, liquid), Raman (liquid) and quantum chemical calculations (DFT and ab initio methods)).Theoretical and experimental vibrational results evidenced the presence of a single conformer with C₁ symmetry. This result is in agreement with the adopted geometry of covalent sulphonates. The conformational preference was studied using the total energy scheme and natural bond orbital partition scheme. Additionally, the total potential-energy has been deconvoluted using six fold decomposition in terms of a Fourier-type expansion.     

Thermodynamic properties of bromine fluorene derivatives: An experimental and computational study

This report presents a comprehensive experimental and computational study of the thermodynamic properties of two bromine fluorene derivatives: 2-bromofluorene and 2,7-dibromofluorene. The standard (p° = 0.1 MPa) molar enthalpies of formation in the crystalline phase of these compounds were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by rotating bomb combustion calorimetry. The vapour pressures of the crystalline phase of the two compounds were measured using the Knudsen effusion method and a static method that has also been used to measure the liquid vapour pressures of 2-bromofluorene. From these results the standard molar enthalpies, entropies and Gibbs energies of sublimation of the two compounds studied and of vapourisation of 2-bromofluorene were derived. The enthalpies and temperatures of fusion were determined from DSC experiments. Derived results of standard enthalpies and Gibbs energies of formation, in both gaseous and crystalline phases, were compared with the ones reported in the literature for fluorene.The experimental values of the gas-phase enthalpies of formation of each compound were compared with estimates based on density functional theory calculations using the B3LYP hybrid exchange–correlation energy functional with the 6-311++G(d,p) basis set.     

A fluoroaryl substituent with spectator function: Reactivity and structures of cyclic and acyclic HF4C6-substituted phosphanes

The reactivity of a series of phosphanes with a fluoroaryl group (HF₄C₆-) carrying a spectator function in para position has been explored with respect to the formation of low coordinated and phosphorus rich phosphanes. An asymmetric diphosphene has been indentified as an intermediate in the synthesis of a linear 1,3-dihydrophosphane, while the symmetric diphosphene undergoes 2 + 2 cycloaddition under formation of the corresponding cyclotetraphosphetane for which a crystal structure could be obtained. Attempts to synthesize HF₄C₆-substituted iminophosphanes generally failed, which is attributed to the electronic nature of the corresponding precursors as suggested by quantum chemical calculations.