Simulation of ion beam extraction and focusing system

The characteristics of ion beam extraction and focused to a volume as small as possible were investigated with the aid of computer code SIMION 3D version 7.This has been used to evaluate the extraction characteristics(accel-decel system)to generate an ion beam with low beam emittance and high brightness.The simulation process can provide a good study for optimizing the extraction and focusing system of the ion beam without any losses and transported to the required target.Also,a study of a simulation model for the extraction system of the ion source was used to describe the possible plasma boundary curvatures during the ion extraction that may be affected by the change in an extraction potential with a constant plasma density meniscus.     

Simulation of ion beam extraction and focusing system

The characteristics of ion beam extraction and focused to a volume as small as possible were investigated with the aid of computer code SIMION 3D version 7. This has been used to evaluate the extraction characteristics (accel-decel system) to generate an ion beam with low beam emittance and high brightness. The simulation process can provide a good study for optimizing the extraction and focusing system of the ion beam without any losses and transported to the required target. Also, a study of a simulation model for the extraction system of the ion source was used to describe the possible plasma boundary curvatures during the ion extraction that may be affected by the change in an extraction potential with a constant plasma density meniscus.     

Optimization and numerical simulation for the extraction system of the H~- multicusp ion source

A new ion source has been designed and manufactured for the CYCLONE30 accelerator, which has a much advanced performance compared with the original. It is expected that the newly designed ion source extraction system will transport a very large percentage of the beam without deteriorating the beam optics, which is designed to deliver an H^- beam at 30 keV. The accelerator assembly consists of three circular aperture electrodes made of copper. The simulation study was focused on finding parameter sets that raise the beam perveance as large as possible and which reduce the beam divergence as low as possible. Ion beams of the highest quality are extracted whenever the half-angular divergence is minimum, for which the perveance current intensity and the extraction gap have optimum values. The triode extraction system is designed and optimized by using CST software (for Particle Beam Simulations). The physical design of the extraction system is given in this paper. From the simulation results, it is concluded that it is possible to achieve this goal by decreasing the thickness of the plasma electrode, shortening the first gap, and adjusting the acceleration electrode voltage.     

Design of triode extraction system for a dual hollow cathode ion source

A triode extraction system is designed for a dual hollow cathode ion source being developed at the Institute of Heavy Ion Physics,Peking University.Basic parameters of the plasma are selected after examining the operation principle of the ion source,then the triode extraction system is designed and optimized by using software PBGUNS (for Particle Beam GUN Simulations).The physical design of the system is given in this paper.     

Design of triode extraction system for a dual hollow cathode ion source

A triode extraction system is designed for a dual hollow cathode ion source being developed at the Institute of Heavy Ion Physics, Peking University. Basic parameters of the plasma are selected after examining the operation principle of the ion source, then the triode extraction system is designed and optimized by using software PBGUNS (for Particle Beam GUN Simulations). The physical design of the system is given in this paper.     

ECR离子源束流引出与传输的研究

针对ECR离子源的束流引出及传输研究，在中国科学院近代物理研究所的LECR3离子源实验平台上开展了大量的实验. 实验中研究了等离子体电极引出孔径、反射电极(抑制电极)偏压以及Glaser透镜等因素对束流引出与传输的影响. 研究的重点是试图通过系列实验与分析来研究如何能更有效地引出强流离子束流并减小其在传输空间的损失. 给出了实验的主要结果，结合这些数据对ECR离子源的束流引出与传输进行了较全面的分析，并综合这些实验结果与分析结果得出了该物理过程的一般物理图像.     

Numerical simulation and design of a thermionic electron gun

This paper reports the simulation of an electron gun. The effects on the beam quality of some parameters on the beam quality were studied and optimal choices were identified. It gives numerical beam qualities for a common electrostatic triode gun, and the dependencies on design parameters such as electrode geometries and bias voltages to these electrodes are shown. An electron beam of diameter 5 mm with energy of 5 ke V was assumed for the simulation process. Some design parameters were identified as variable parameters in the presence of space charge.These parameters are the inclination angle of emission electrode, the applied voltage to the focusing electrode, the gap width between the emission electrode and the focusing electrode and the diameter of the focusing electrode. The triode extraction system is designed and optimized by using CST software(for Particle Beam Simulations). The physical design of the extraction system is given in this paper. From the simulation results, it is concluded that the inclination angle of the emission electrode is optimized at 22.5?, the applied voltage to the focusing electrode was optimized and found to be Vfoc =-600 V, the optimal separation distance(gap between emission electrode and focusing electrode) is 4 mm, and the optimal diameter of the emission electrode is 14 mm. Initial results for these efforts aimed at emittance improvement are also given.     

Optimization of Extraction System for Cold Cathode Ion Source

We have simulated ion trajectories with the SIMION 3D, version 7.0, package to optimize the extraction system of a cold-cathode ion source and compared the results with experimental data collected under the same operational conditions. The simulation determined the negative voltage applied to the extractor electrode and the extraction gap widths that maximize the ion-beam current for singly charged nitrogen ions with low emittance and small diameter. The experiment measured the input electrical discharge and output ion beam characteristics of the source at different nitrogen pressures. The extractor electrode voltage and the extraction gap width were determined at 8?×?10^?4?Torr nitrogen. The results of the simulation agreed well with the experimental data.     

ECR离子源束流发射度的实验研究

利用最新自行研制的电扫描发射度探测系统, 在ECR离子源上进行了一系列关于ECR离子源引出束流发射度的研究. 这套电扫描发射度探测系统安装在中国科学院近代物理研究所(兰州)的LECR3试验平台的束运线上. 试验中, 通过测量相关参数, 研究了磁场、微波、掺气效应及负偏压效应等对引出束流发射度的影响. 利用实验所得的结果与关于ECR等离子体和离子源束流发射度的半经验理论, 分析推导了离子源各可调参数与ECR等离子体的直接关系, 这为分析探索ECR离子源的工作机制提供了一定的参考依据.     

受空间电荷效应影响的离子束流从等离子体边界的最佳引出的一阶理论

The problem of extracting space-charge-limited ion beams from spherical emission boundaries is analyzed for simple,two electrode,parallel-plate and spherical sector electrode systems by application of Langmuir-Blodgett theory with account taken for the divergent lens effect caused by the aperture in the extraction electrode.Results derived from simulation studies for the three electrode system,designed for use with the Oak Ridge National Laboratory ECR ion source,complement predictions made from elementary analytical theory with or without magnetic field in the extraction region of the source.Under minimum half- angular divergence(minimum emittance)conditions,the plasma emission boundary has an optimum curvature and the perveance,P,(i.e,current density,j and extraction gap,d),has an optimum value for a given charge- state.From these studies,we find that the optimum perveance for any electrode system can be determined from the Child-Langmuir relation for the parallel-plate electrode system multiplied by a factor,F with value 0.49≤F≤1.     

Characteristics of a high frequency ion source used in a low-energy accelerator

This work presents the characteristics of a high frequency ion source operating on a low energy, 150 keV accelerator. The latter is to be used as a neutron generator and its design is based on a theoretical analysis which shows that if the axial potential in an electrostatic electrode system is made to increase with four thirds the power of axial distance, inward electric forces will compensate space charge forces tending to blow up the beam. This results in a simplified acceleration tube much shorter and of higher gradient than the conventional acceleration columns. The ion source itself is an ordinary type using axial extraction of the beam, and its main properties investigated are the beam current and beam quality (or emittance). Dependence of the two on different parameters is investigated in a series of tests.     

Multi-element focused ion beams using compact microwave plasma ion source

Focused ion beams (FIB) are widely used for research and applications in nanoscience and technology. We have developed a compact microwave plasma based multi element FIB (MEFIB) system in order to widen the applications and overcome the limitations faced by conventional Liquid Metal Ion Source (LMIS) based FIB systems, that provide primarily Ga ions. The MEFIB source provides high density plasmas (∼1.5 × 10¹¹ cm⁻³) in a compact cross section. Recently the ion energy spread in the plasma meniscus from where the beams are extracted is found to be small (∼5 eV) [1–3]. The beam extraction and focusing are carried out using electrostatic multi electrode assembly. AXCEL INP and SIMION simulation codes are employed for the design of electrostatic Einzel lenses for beam focusing. The beam focal point is measured using a specially designed three slit Faraday cup and the spot size is measured by the micrography of craters formed by the focused ion beams impinging on copper and aluminium substrates. The initial experimental results show a focused beam spot size of ∼ 25 micron which is in good agreement with the simulations. By further reduction of electrode apertures and operating the second Einzel lens at higher potentials, submicron focused ion beams can be expected.     

STUDY OF TRANSPORT CHARACTERISTICS OF INTENSE ION BEAMS IN ACCELERATION-DECELERATION SYSTEM

In this paper the numerical simulation method of using a computer for calculating transport characteristics of intense heavy ion beams with very low energy in an acceleration-deceleration system is studied systematically. Four geometrical constructions of target electrode in the acceleration-deceleration system have been calculated. The relationship between the transport characteristics of intense ion beams and physical and geometric parameters are given in detail.Our results show that the ion optics of four electrode system can maintain good beam focal quality for intensetion beams.     

强流ECR离子源引出系统研究

为了提高强流ECR 离子源的引出束流品质,分别设计了1# 和2# 引出系统,利用束流引出模拟软件PBGUNS 对1# 和2# 引出系统进行了质子束流引出与传输的模拟计算,结合实际测得的发射度数据分析引出系统,发现2# 引出系统比1# 引出系统引出束流品质高。对ECR 离子源引出系统的电势等位线分布等参数引起的球差进行了简单数学推导及MATLAB 绘图,并结合1# 和2# 引出系统束流相图模拟结果证明了球差会使引出束流品质有效发射度增长,通过适当加大电极孔径可改善束流聚焦情况,得到了束流光学聚焦较好的束流引出系统设计。To improve the quality of extracted ion beam from a high current ECR ion source, 1# and 2# extraction systems were designed and tested. The PBGUNS code was used to simulate the 1# and 2# extraction systems of proton ion beam. The emittance measurement results with the two different extraction systems were compared and analyzed with the simulation, the conclusion that more high quality beam extracted from 2# system than 1# system was got. The formula derivation of ECR ion source extraction system spherical aberration and MATLAB drawing was done by the analyzing on the distribution of extraction field equipotentials, effective emittance increasing caused by spherical berration was proved by 1# and 2# extraction systems beam phase space simulation result, beam focusing would be improved if electrode hole size increasing appropriately and a general concept on good optics focusing of ion beam extraction system was proposed finally.     

HL-2M装置中性束离子源束光学红外成像实验研究

为了研究HL-2M装置中性束注入(NBI)加热用的80kV/45A/5s热阴极离子源束光学特性，采用红外电荷耦合元件(CCD)成像技术，测量离子源引出粒子束轰击量热靶板产生的温度分布，得到束功率密度空间分布区间特征参数1/e半宽度。在NBI热阴极离子源调试平台上，扫描离子源的放电和引出参数，利用CCD红外热像仪获得了对应参数下量热靶上的束功率密度分布。实验结果表明，HL-2M装置NBI加热系统80kV/45A离子源可用的导流系数范围为0.7~1.5μP。同样导流系数下，梯度电极与等离子体电极的分压比较高时，引出束流的半宽度较小。     

Feasibility study on high current ion beam extraction from anode spot plasma for large area ion implantation

In this paper, we have investigated the feasibility of the high current beam extraction from anode spot plasma as an ion source for large area ion implantation. Experiments have been carried out with the ambient plasma produced by inductive coupling with radio-frequency (RF) power of 200 W at the frequency of 13.56 MHz. Anode spot plasmas are generated near the extraction hole of 2 mm in diameter at the center of a bias electrode whose area exposed to the ambient plasma can be changed. It is found that the maximum ion beam current is extracted at the optimum operating pressure at which the area of bias electrode exposed to ambient plasma is fully covered with the anode spot plasma whose size is dominantly determined by the operating pressure for given gas species. It is also observed that the extracted ion beam current increases nonlinearly with the bias power due to the changes in size and shape of the anode spot plasma. With the well-established anode spot plasma operating at the optimum gas pressure, we have successfully extracted high current ion beam of 6.4 mA (204 mA/cm²) at the bias power of 22 W (∼10% of RF power), which is 43 times larger than that extracted from the plasma without anode spot. Based on the experimental results, criteria for electrode design and operating pressure for ion beam extraction from larger extraction aperture are suggested. In addition, the stability of anode spot plasma in the presence of ion beam extraction through an extraction hole is discussed in terms of the particle balance model.     

RF离子源引出特性的研究

 为了使RF离子源具有良好的引出特性，测试了吸极几何参数、振荡器板压和引出电压对离子源聚焦度的影响，对实验结果进行了分析。在其它参数不变的情况下，吸极的外径D与内径d之比存在最佳值，增加D/d，有利于过聚焦的离子束恢复聚焦状态。吸极的长度为L，石英套管比吸极长l。当l/D增大时，聚焦度上升，引出束流下降。L/d之比减小时，聚焦度增大。当L/d小于4时，聚焦度增加趋势变缓。综合考虑聚焦度、引出束流和气压，D/d，l/D，L/d适宜的选择范围分别为1.6～2.1，0.7～1.1,4～7。增加振荡器功率会使离子束呈弱聚焦，而增加引出电压会使离子束呈过聚焦。振荡器功率和引出电压都存在最佳值。     

低能离子束横向发射度的测量及分析

The transverse emittance of an ion beam describes its transverse size as the particles are transported from a source to a target.It allows for predicting beam losses in limiting apertures and the beam focus size at the target.Various definitions and issues are discussed.The most common and emerging measuring techniques are presented,including their advantages.Several methods of emittance data analysis,their accuracy and trustworthiness,are discussed.     

Numerical Modeling of Ion-Optical Systems for Extraction of a Beam of Negative Hydrogen Ions and Its Acceleration and Matching with a Radio-Frequency Quadrupole Accelerator

A source of negative hydrogen ions is constructed at the Institute for High Energy Physics in order to raise the intensity of the U-70 accelerator complex using multiturn charge-exchange injection. The 3D ion-optical IBSimu simulation package was used to model and optimize the system for extraction of an ion beam from plasma, its acceleration to 100 keV, and matching with a radio-frequency quadrupole (RFQ) accelerator. The system of extraction of an ion beam with a current of 50 mA and electron-flow suppression was modeled. The magnetic transport channels with two solenoids and six quadrupole lenses were compared. The end goals of analysis of the matching channel were to obtain the needed Twiss parameters and to minimize the emittance growth at the RFQ input.     

Laser ion source activities at Brookhaven National Laboratory

In Brookhaven National Laboratory (BNL), we have been developing laser ion sources for diverse accelerators. Tabletop Nd:YAG lasers with up to several Joules of energy are mainly used to create ablation plasmas for stable operations. The obtained charge states depend on laser power density and target species. Two types of ion extraction schemes, direct plasma injection scheme (DPIS) and conventional static extraction, are used depending on the application. We optimized and selected a suitable laser irradiation condition and a beam extraction scheme to meet the requirement of the following accelerator system. We have demonstrated to accelerate more than 5?×?10¹⁰ of C⁶⁺ ions using the DPIS. We successfully commissioned a low-charge ion beam provider to the user facilities in BNL. To achieve higher current, higher charge state and lower emittance, further studies will continue.