Regulating element distribution to improve magnetic properties of sintered Nd–Fe–B/Tb–Fe–B composite magnets

Nd content was varied in Nd_(13.2-x)Fe_(80.8+x)B_6(x = 0, 0.5, 1, and 1.5) to optimize the magnetic properties of sintered Nd–Fe–B/Tb–Fe–B composite magnets, which were prepared by mixing 9 g of Nd–Fe–B with 1 g of Tb_(17)Fe_(75)B_8 powder.In conventional magnets, by reducing Nd content, the coercivity of 10.4 kOe in Nd_(13.2)Fe_(80.8)B_6 decreases to 7.2 kOe in Nd_(12.2)Fe_(81.8)B_6; meanwhile, in Nd–Fe–B/Tb–Fe–B magnets the coercivity does not decrease when reducing Nd content.In the intergranular phase, the Tb content increases owing to the reducing Nd content of the Nd–Fe–B alloy in the sintered composite magnets.Therefore, the excess Tb in Tb_(17)Fe_(75)B_8 enters the intergranular phase, and more Tb atoms can substitute for Nd at the grain boundary of the Nd–Fe–B phase, leading to a more significant increase in coercivity.The remanence increases with reducing Nd content, and the energy product of 39.1 MGOe with a high coercivity of 21.0 kOe is obtained in Nd_(12.2)Fe_(81.8)B_6/Tb_(17)Fe_(75)B_8 magnets.These investigations show that magnetic properties can be further improved by regulating the element distribution in sintered composite magnets.     

Effect of optimized aging processing on properties of the sintered Dy-doped Nd–Fe–B permanent magnet

We investigate the effect of the optimized aging processing on magnetism and mechanical property of the sintered Dydoped Nd–Fe–B permanent magnet. The experimental results show that the magnetism, especially intrinsic coercivity, of the optimized aged Dy-doped Nd–Fe–B magnet is more excellent than that of the sintered one, but the former's strength and hardness are lower than that of the latter. It was observed that the optimized aged Dy-doped Nd–Fe–B magnet have more uniform grain size, thinner(Nd, Dy)-rich boundary phase. By means of the EBSD technology, the number of larger angle grain boundaries in the optimized aged Dy-doped Nd–Fe–B magnet is more than that of the sintered one. The reasons for the increased intrinsic coercivity and decreased mechanical properties of the optimized aged Dy-doped Nd–Fe–B magnet are also discussed.     

Effects of terbium sulfide addition on magnetic properties,microstructure and thermal stability of sintered Nd-Fe--B magnets

To increase coercivity and thermal stability of sintered Nd–Fe–B magnets for high-temperature applications, a novel terbium sulfide powder is added into(Pr_(0.25)Nd_(0.75))_(30.6)Cu_(0.15)Fe_(bal)B_1(wt.%) basic magnets. The effects of the addition of terbium sulfide on magnetic properties, microstructure, and thermal stability of sintered Nd–Fe–B magnets are investigated.The experimental results show that by adding 3 wt.% Tb_2S_3, the coercivity of the magnet is remarkably increased by about 54% without a considerable reduction in remanence and maximum energy product. By means of the electron probe microanalyzer(EPMA) technology, it is observed that Tb is mainly present in the outer region of 2:14:1 matrix grains and forms a well-developed Tb-shell phase, resulting in enhancement of HA, which accounts for the coercivity enhancement.Moreover, compared with Tb_2S_3-free magnets, the reversible temperature coefficients of remanence(α) and coercivity(β) and the irreversible flux loss of magnetic flow(hirr) values of Tb_2S_3-added magnets are improved, indicating that the thermal stability of the magnets is also effectively improved.     

Effect of annealing temperature on coercivity of Nd–Fe–B magnets with TbFeAl doping by process of hot-pressing

The Nd–Fe–B magnets are pre-sintered and then processed with hot-pressing, and the resulting magnets are called the hot-pressed pretreated(HPP) magnets. The coercivity of the HPP magnets increases as the annealed temperature increases.When the annealing temperature is 900℃, the coercivity of the magnet is only 17.6 kOe(1Oe = 79.5775 A·m~(-1)), but when the annealing temperature rises up to 1060℃, the coercivity of the magnet reaches 23.53 k Oe, which is remarkably increased by 33.7%. The microstructure analysis indicates that the grain surface of the HPP magnet becomes smoother as the annealed temperature increases. The microstructure factor α is changed according to the intrinsic coercivity model formula. The α of the magnet at 900℃ is only 0.578, but it is 0.825 at 1060℃. Microstructural optimization is due mainly to the increase of coercivity of the HPP magnet.     

Effects of oxidation of DyH_3 in Nd–Fe–B sintered magnets

The effects of oxidation of Dy H3 with respect to dysprosium addition to Nd–Fe–B sintered magnets are examined.Samples sintered with the addition of freshly milled dysprosium hydride, dysprosium hydride exposed to air at room temperature for 15 min and dysprosium hydride exposed to air at 100°C for 3.5 hours are studied from the aspects of magnetic properties, microstructures, and their degradation, respectively. It is found that some oxidized dysprosium is distributed in the Nd-rich phase; hence, the decrease of remanence occurred. The degradation results indicate that preoxidised dysprosium can be a major factor in increasing the corrosion rate. The microstructures and corrosion acceleration test suggested that the oxidation is detrimental to remanence.     

Magnetic properties of misch-metal partially substituted Nd–Fe–B magnets sintered by dual alloy method

The misch-metal(MM) partially substituted Nd–Fe–B sintered magnets were fabricated by the dual alloy method,and the crystal structure, microstructure, and magnetic properties were analyzed comprehensively. X-ray diffraction(XRD)reveals that the increasing content of the MM has an inconsiderable effect on the crystallographic alignment of the magnets.Grains of the two main phases are uniformly distributed, and slightly deteriorate on the grain boundary. Due to the diffusion between the adjacent grains, the MM substituted Nd–Fe–B magnets contain three types of components with different Ce/La concentrations. Moreover, the first-order reversal curve(FORC) diagram is introduced to analyze the magnetization reversal process, coercivity mechanism, and distribution of reversal field in magnetic samples. The analysis indicates that there are two major reversal components, corresponding to the two different main phases. The domain nucleation and growth are determined to be the leading mechanism in controlling the magnetization reversal processes of the magnets sintered by the dual alloy method.     

Progress in recycling of Nd–Fe–B sintered magnet wastes

Significant efforts have been put into the recycling of bulk Nd–Fe–B sintered magnet wastes around the world in the past decade because bulk Nd–Fe–B sintered magnet wastes are valuable secondary rare-earth resources.There are two major facts behind the efforts.First, the waste magnets contain total rare-earth content as high as more than 30 wt.%, which is higher than most natural rare-earth mines.Second, the waste magnets maintain the physical and chemical properties of the original magnets even with deterioration of the properties on surfaces due to corrosion and contamination.In this review,various techniques for recycling bulk Nd–Fe–B sintered magnet wastes, the overall properties of the recycled Nd–Fe–B sintered magnets, and the mass production of recycled magnets from the wastes are reviewed.     

Influence of misch metal content on microstructure and magnetic properties of R–Fe–B magnets sintered by dual alloy method

MM_(14)Fe_(79.9)B_(6.1)/Nd_(13.5)Fe_(80.5)B_6 magnets were fabricated by dual alloy method(MM, misch metal). Some magnets have two Curie temperatures. Curie temperatures T_(c1)corresponds to the main phase which contains more La Ce, and T_(c1) decreases from 276.5?C to 256.6?C with the content of MM increasing from 30.3 at.% to 50.6 at.%. The variation of Br with the increase of MM indicates the existence of inter-grain exchange coupling in the magnets. When MM/R ≤ 30.3 at.%,the magnetic properties can reach the level of the intrinsic coercivity Hcj≥ 7.11 kOe and the maximum energy product(BH)max≥ 41 MGOe. Compared with Nd, La and Ce are easier to diffuse to the grain boundaries in the sintering process,and this will cause the decrease of H_(cj) Due to the diffusion between the grains, the atomic ratio of La, Ce, Pr, and Nd in each grain is different and the percentage of Nd in all grains is higher than that in misch metal.     

Micromagnetism simulation on effects of soft phase size on Nd_2Fe_(14)B/α-Fe nanocomposite magnet with soft phase imbedded in hard phase

In this study, micromagnetism simulation by using finite difference method is carried out on the Nd_2Fe_(14)B/α-Fe nanocomposite magnet with soft phase imbedded in hard phase. The effects of soft magnetic phase size(S) on the magnetic properties and magnetic reversal modes are systematically analyzed. As S increases from 1 nm to 48 nm,the remanence(J_r) increases, while the coercivity(H_(ci)) decreases, leading to the result that the magnetic energy product [(BH)_(max)] first increases slowly, and then decreases rapidly, peaking at S = 24 nm with the(BH)_(max) of 72.9 MGOe(1 MGOe = 7.95775 kJ·m~(-3)). Besides, with the increase of S, the coercivity mechanism of the nanocomposite magnet changes from nucleation to pinning. Furthermore, by observing the magnetic moment evolution in demagnetization process, the magnetic reversal of the soft phase in the nanocomposite magnet can be divided into three modes with the increase of S: coherent rotation(S 3 nm), quasi-coherent rotation(3 nm ≤S 36 nm), and the vortex-like rotation(S 36 nm).     

利用Pr_(70)Cu_(30)晶界扩散改善烧结钕铁硼废料矫顽力的研究

钕铁硼磁体制备过程中出现的部分块体废料由于矫顽力较低,性能难以满足使用要求.本文主要通过晶界扩散技术来提高废料磁体的矫顽力.采用Pr_(70)Cu_(30)合金作为扩散介质,对烧结钕铁硼废料磁体进行了晶界扩散处理,研究了扩散温度、扩散时间和回火时间对扩散后的磁体性能的影响.结果显示,800℃下扩散3 h,磁体的矫顽力从原来的7.88 kOe(1 Oe=79.5775 A/m)提升至11.55 kOe,提升幅度为46.6%,同时剩磁没有明显降低.扩散后回火对矫顽力的提升有一定的作用.800℃下扩散4h后的磁体在500℃回火3h后,最高矫顽力可达11.97 kOe,比原磁体废料提高了51.9%,接近成品磁体的水平.显微组织分析证实了晶界扩散的作用.扩散处理后的磁体中,主相晶粒间形成了连续晶间相,起到有效的磁隔离作用,有利于矫顽力的提高.研究还发现,Pr_(70)Cu_(30)晶界扩散虽然可以使磁体腐蚀电位上升,但也会增加腐蚀电流密度,不利于磁体抗腐蚀性的改善.本文工作对于提高材料的成品率具有重要意义.     

Nb含量对烧结NbFeB永磁体磁性能及显微结构的影响

关键词：     

Microstructure of sintered ND-Fe-Ga-B magnets with Mo and MoS2 addition

The effect of Mo and MoS₂ additions on the magnetic and microstructure properties has been investigated in Nd-Fe-Ga-B sintered magnets. Coercivity can be increased by both the additions, but the MoS₂ addition provides the larger increase per Mo atom for up to 0.6 at.% Mo. Microstructure investigation reveals a new amorphous intergranular Ga rich phase. This phase forms a thin layer in the grain boundaries and leads to a wetting behavior of the grain boundary phase, therefore increasing the coercivity. Molybdenum addition in the form of MoS₂ is found to modify the Nd₂Fe₁₄B phase, rather than form new minority phases, and the coercivity enhancement of the magnet is due to the increased anisotropy field of the hard magnetic phase.     

Coercivity enhancement of sintered Nd-Fe-B magnets by grain boundary diffusion with Pr80-xAlxCu20 alloys

A grain boundary diffusion (GBD) process with Pr_80-xAl_xCu₂₀ (x = 0, 10, 15, 20) low melting point alloys was applied to commercial 42M sintered Nd-Fe-B magnets. The best coercivity enhancement of a diffused magnet was for the Pr₆₅Al₁₅Cu₂₀ GBD magnet, from 16.38 kOe to 22.38 kOe. Microstructural investigations indicated that increase in the Al content in the diffusion source can form a continuous grain boundary (GB) phase, optimizing the microstructure to enhance the coercivity. The coercivity enhancement is mainly due to the formation of a continuous GB phase to separate the main phase grains. Exchange decoupling between the adjacent main phase grains is enhanced after the GBD process. Meanwhile, the introduction of Al can effectively promote the infiltration of Pr into the magnet, which increases the diffusion rate of rare-earth elements within a certain range. This work provides a feasible method to enhance coercivity and reduce the use of rare-earth resources by partial replacement of rare-earth elements with non-rare-earth elements in the diffusion source.     

Phase distribution and computed magnetic properties of high-remanent composite magnets

Numerical micromagnetic calculations using finite-element techniques allow a quantitative treatment of the correlation between the microstructure and the basic magnetic properties of two-phase permanent magnets such as the remanence, the coercive field and the maximum energy product. For the investigation of (A) the role of the amount of the soft magnetic phase, and (B) the effect of grain shape, realistic three-dimensional grain arrangements have been used. The numerical results show that both short-range exchange and long-range magnetostatic interactions determine the magnetic properties. The optimal microstructure of an isotropic nanocrystalline permanent magnet was found to consist of soft magnetic particles with a large spontaneous magnetization embedded between hard magnetic grains. Exchange interactions than enhance the remanence of isotropic, composite magnets of Nd₂Fe₁₄B and -Fe by about 60%. Because of exchange hardening the soft magnetic phase can be increased up to 50% without a significant loss of coercivity. A uniform grain structure suppresses strong demagnetizing fields and this increases coercivity by 30% as compared with irregular shaped particles.     

Re-exchange of Fe and Cu at the interface in sintered Nd–Fe–B magnets: A method to eliminate Fe precipitation at grain boundaries

According to the decoupling hypothesis for magnetic grains, the coercivity in sintered Nd–Fe–B magnets is increased after Cu doping, which is due to the formation of non-magnetic grain boundaries. However, this method partially fails, and ferromagnetic Fe-segregation occurs at the grain boundary. We discovered both experimentally and through calculation that the Fe content at the grain boundaries can be tuned across a wide range by introducing another element of Ag. Segregated Fe at high temperature at the grain boundary re-dissolves into Nd₂Fe₁₄B grains during annealing at low temperature. Both configurable and magnetic entropies contribute a large driving force for the formation of nonmagnetic grain boundaries. Almost zero Fe content could be achieved at the grain boundaries of sintered Nd–Fe–B magnet.     

晶粒易轴取向度对纳米晶永磁Pr2Fe14B磁性的影响

构造了立方和不规则形状晶粒的各向异性纳米晶单相Pr₂Fe₁₄B磁体 .利用微磁学的有限元法，模拟计算了样品的磁滞回线.计算结果表明，随着磁体晶粒易轴取向度的变差， 磁体的剩磁、矫顽力均随之下降.不同晶粒尺寸的纳米晶单相Pr₂Fe_{14B磁体，其磁 性能随取向度的变化快慢不同，原因在于磁体中的晶间交换作用 (IGEC) 的强弱不同.随着 晶粒取向度的提高，纳米晶单相磁体的矫顽力逐渐增加，这完全不同于烧结磁体. 关键词： 纳米晶磁体 矫顽力 剩磁}     

The magnetic properties,thermal stability and microstructure of Nd–Fe–B/Ga sintered magnets prepared by blending method

The effect of gallium added by blending method on the magnetic properties, thermal stability and microstructure of Nd_16.5Dy_16.0Fe_53.45Co_13.0B_1.05 (wt%) sintered magnets was investigated. The experimental results show that an appropriate Ga addition can markedly increase the coercivity, reduce the irreversible loss and slightly enhance the remanence. For instance, by adding 0.5 wt% Ga, the coercivity is increased from 1232 to 1819 kA/m; the irreversible loss after being exposed at 200°C for 0.5 h is reduced from above 33% to below 5%. Microstructure analyses show that the grain boundaries of the magnets with and without Ga addition are substantially different. The grain boundaries of the Ga-free magnet are meandrous. On the other hand, most of the boundaries of Ga-containing magnets are straight and smooth. These characteristics can be explained by the appearance of new phases during sintering process.     

A study of Sm-substituted SrM magnets sintered using hydrothermally synthesised powders

Anisotropic SrM magnets with Sm substitution, which is observed to have the largest beneficial effect both on the coercivity and on the inhibition of grain growth at high temperature among the other elements such as La, Nd and Pr, were investigated. The average grain size of the samples decreases with increasing Sm/Sr ratio. All the magnets with Sm additions exhibit a bigger coercivity and remanence than those of the SrM magnet without Sm and the coercivity of the magnets increases with increasing Sm/Sr ratio. EDX quantitative analysis suggests that the solubility of Sm³⁺ in the SrM-type structure is very small and that the Sm³⁺ preferably goes into SrFeO_3−x, which is probably located around the SrM grain boundaries. The coercivity mechanism of the magnets is nucleation controlled. The formation and the distribution of the SrFeO_3−x phase around the SrM grain boundraies probably provides the inhibition of SrM grain growth, the reduction of the reverse domain nucleation at the grain surface and the isolation of the SrM grains. All these factors would contribute to the improvements of the coercivity of the magnets with Sm additions.