单一亚波长孔径增强透射效应的传输线模型

为了研究亚波长孔径的增强透射效应,把传输线理论引入到了单一亚波长金属孔径的增强光学透射效应中。把金属孔径看成传输线,将电流在传输线上的传输和类Fabry-Pérot腔联系起来;把孔径的出射面看成是传输线的输出端,将出射面的电流看成是一种局域的衰逝电流,电流经传输线在传输线的输出端以天线辐射的形式辐射电磁波。解释了孔径透射的近场分布问题、孔径增强透射峰的位置问题和透射峰位置随金属板厚度的红移问题,得到了与其它理论和实验一致的结果,对开发基于增强透射的亚波长元件具有重要的参考价值。     

Enhanced and confined light transmission through a funnel-type aperture with a sub-wavelength outlet

Enhanced transmission through sub-wavelength hole arrays and a single sub-wavelength aperture with periodic corrugations surrounded have been investigated extensively. We report the similar phenomenon through a funnel-type aperture with a sub-wavelength outlet in a thick silver film, which was obtained numerically by using finite-difference time-domain method. Properties of the transmission spectrum can be modulated by geometric parameters of the funnel-type aperture. With periodic grooves or dielectric gratings on the output surface of the structure, beaming light emission can be obtained.     

光子角动量在环形金属纳米孔异常透射过程中的作用

在环形凹槽包围环形金属纳米孔的异常透射器件的研究中,环形凹槽可以将携带光子角动量的入射光转化为涡旋表面等离极化激元,这些涡旋表面等离极化激元传向几何中心并与直接照射在环形纳米孔上的光子发生干涉,当相互干涉的光子满足相位匹配条件时,环形纳米孔的透射率得到显著增强.本文利用理论分析和数值计算的方法研究了光子角动量和凹槽半径对环形纳米孔透射过程的影响.我们发现调节环形凹槽的半径和入射光携带的光子角动量可以调节光子在金膜上表面传输时的径向传播相位,进而影响了环形纳米孔附近的干涉电场强度,最终决定了环形纳米孔的透射率,进而可以通过调节凹槽的半径来调节携带不同光子角动量的光束在环形纳米孔的透射率.本文的研究结果对基于涡旋表面等离极化激元的异常透射器件的设计具有重要的指导意义.     

Topology optimization using the improved element-free Galerkin method for elasticity

The improved element-free Galerkin(IEFG) method of elasticity is used to solve the topology optimization problems.In this method, the improved moving least-squares approximation is used to form the shape function. In a topology optimization process, the entire structure volume is considered as the constraint. From the solid isotropic microstructures with penalization, we select relative node density as a design variable. Then we choose the minimization of compliance to be an objective function, and compute its sensitivity with the adjoint method. The IEFG method in this paper can overcome the disadvantages of the singular matrices that sometimes appear in conventional element-free Galerkin(EFG) method. The central processing unit(CPU) time of each example is given to show that the IEFG method is more efficient than the EFG method under the same precision, and the advantage that the IEFG method does not form singular matrices is also shown.     

Mie谐振耦合的亚波长金属孔宽带高透射传输

表面等离激元共振激发的亚波长金属孔透射较Bethe理论有大幅度的提高,然而,由于共振对频率的敏感性以及金属在光频的高损耗特性,表面等离激元共振难以实现亚波长金属孔的宽带高透射传输.本文采用放置在金属孔两边的硅纳米颗粒的Mie谐振耦合取代表面等离激元共振,实现亚波长金属孔的宽带高透射传输.全波仿真结果表明,采用Mie谐振耦合的亚波长金属孔(r/λ=0.1)光传输,透射系数超过90%的带宽达到65 nm,与表面等离激元共振诱导的透射增强相比,峰值增高了1.5倍,3 dB带宽拓宽了17倍.根据耦合模理论,建立了Mie谐振耦合亚波长金属孔透射的等效电路模型,并在临界耦合状态下反演出电路模型中的元件参数值.进一步研究发现,仅通过改变等效电路模型中的耦合系数,就可全面揭示Mie谐振耦合亚波长金属孔透射的传输规律,并得到与全波电磁仿真完全一致的结果,从而找到光与放置硅纳米颗粒的亚波长金属孔相互作用的数学表达,也给予人们在光学领域按照电路设计方法构建相应功能模块的启示.     

大口径主反射镜轻量化结构拓扑优化设计方法

介绍了一种大口径主反射镜轻量化结构拓扑优化设计方法,该方法是一种理论性强、效率高的新型轻量化优化设计方法。采用变密度法建立连续体结构拓扑优化数学模型,利用OPTISTRUCT优化软件,以主反射镜光轴垂直时在自重作用下的镜面变形与第一阶自然频率作为约束,将主反射镜体积最小作为目标函数进行了连续体拓扑优化。依据优化的拓扑结构形式,结合结构力学及灵敏度分析得到了满足镜面面型、结构刚度及轻量化率要求的最佳主反射镜轻量化结构。     

Design of NRAs having higher aperture opening ratio and autocorrelation compression ratio by means of a global optimization method

When noises considerations are made, nonredundant arrays (NRAs) are endowed with many advantages which other arrays e.g., uniformly redundant arrays (URAs) do not possess in applications of coded aperture imaging. However, lower aperture opening ratio limits the applications of NRA in practice. In this paper, we present a computer searching method based on a global optimization algorithm named DIRECT to design NRAs. Compared with the existing NRAs e.g., Golay's NRAs, which are well known and widely used in various applications, NRAs found by our method have higher aperture opening ratio and auto correlation compression ratio. These advantages make our aperture arrays be very useful for practical applications especially for which of aperture size are limited. Here, we also present some aperture arrays we found. These aperture arrays have an interesting property that they belong to both NRA and URA.     

旋转孔径散斑照相逐点分析法

本文提出了旋转孔径散斑照相的逐点分析法,其杨氏花纹一般来说不是等距离的直条纹,而是与位移的动态过程相联系的曲线条纹.本文解释了这种条纹的意义,给出了理论分析和实验证明.     

合成孔径压缩感知超声成像中的高效能稀疏字典设计

针对目前常见的稀疏字典缺乏针对性,在合成孔径医学超声成像中的应用效果不佳,难以在低压缩率下保证重构图像质量的问题,本文设计了一种高效能的稀疏字典。根据超声回波信号是由发射脉冲信号经过不同延时衰减后叠加的特点,利用发射脉冲作为基函数构造稀疏字典,回波信号在该稀疏字典确定的变换域中具备很好的稀疏性,理论上能使其稀疏表示系数的稀疏度等于超声阵元接收到的反射回波数。通过FieldⅡ对简单点目标和复杂目标的仿真结果表明:在相同的重构算法和压缩率下该稀疏字典重构的平均绝对误差明显小于常见的稀疏字典,其值仅为DWT的几分之一,DFT和DCT的几十分之一,能让回波信号以更低的压缩率实现相同的恢复效果。本文最后使用体模的实际采集数据对算法的实际效果进行检测,实验结果也与仿真结果基本一致。基于该稀疏字典的压缩感知算法可以进一步减少合成孔径成像所需存储的数据量、降低系统的复杂度。     

Propagation of vectorial nonparaxial Gaussian beams through an annular aperture

Starting from the vectorial Rayleigh diffraction integrals, the nonparaxial propagation of vectorial Gaussian beams through an annular aperture is studied. The analytical propagation expressions are derived, which permit us to treat the on-axis field and far field of vectorial nonparaxial Gaussian beams diffracted at the annular aperture, the nonparaxial diffraction at a circular aperture and a circular disc as our special cases in a unified way. The validity of our treatment is confirmed by direct numerical integration of the Rayleigh formulae. It is shown that the f-parameter and annular obscuration affect the beam nonparaxiality in the case of diffraction at the annular aperture.     

Local-in-time adjoint-based method for design optimization of unsteady flows

We present a new local-in-time discrete adjoint-based methodology for solving design optimization problems arising in unsteady aerodynamic applications. The new methodology circumvents storage requirements associated with the straightforward implementation of a global adjoint-based optimization method that stores the entire flow solution history for all time levels. This storage cost may quickly become prohibitive for large-scale applications. The key idea of the local-in-time method is to divide the entire time interval into several subintervals and to approximate the solution of the unsteady adjoint equations and the sensitivity derivative as a combination of the corresponding local quantities computed on each time subinterval. Since each subinterval contains relatively few time levels, the storage cost of the local-in-time method is much lower than that of the global methods, thus making the time-dependent adjoint optimization feasible for practical applications. Another attractive feature of the new technique is that the converged solution obtained with the local-in-time method is a local extremum of the original optimization problem. The new method carries no computational overhead as compared with the global implementation of adjoint-based methods. The paper presents a detailed comparison of the global- and local-in-time adjoint-based methods for design optimization problems governed by the unsteady compressible 2-D Euler equations.     

亚波长分形结构太赫兹透射增强的机理研究

利用太赫兹时域光谱(terahertz time domain spectroscopy,简称THz-TDS),研究了亚波长金属分形结构在THz波段的透射增强特性.分别从实验和理论两个方面,研究了铜箔上各级分形结构THz透射增强现象的产生机理.结果表明,在低频区的透射增强主要是由低级分形线中电子运动的共振引起的,而高频区的透射增强则主要由高级分形线中电子运动的共振引起的.从而将这种透射增强效应归结为分形结构中电子的共振辐射,即分形结构的局域共振效应. 关键词： 分形 太赫兹 透射 共振峰     

长工作距离显微成像数字全息合成孔径方法

提出了一种用于长工作距离下显微成像的数字全息合成孔径方法。首先,在不同斜入射照明条件下记录多幅包含不同物光频谱范围的数字全息图。然后,利用每一幅全息图通过数字方法重构并放大物体强度像。最后,通过非相干叠加这些强度像得到分辨力提高且散斑噪声减小的合成物体强度像。理论分析和实验结果表明,此方法可应用于长工作距离下的原位显微观测。     

长工作距离显微成像数字全息合成孔径方法(英文)

提出了一种用于长工作距离下显微成像的数字全息合成孔径方法。首先,在不同斜入射照明条件下记录多幅包含不同物光频谱范围的数字全息图。然后,利用每一幅全息图通过数字方法重构并放大物体强度像。最后,通过非相干叠加这些强度像得到分辨力提高且散斑噪声减小的合成物体强度像。理论分析和实验结果表明,此方法可应用于长工作距离下的原位显微观测。     

Role of localised surface plasmon polaritons coupling in optical transmission through double-layer metal apertures

In this paper, we investigate the optical properties of the double-layer metal films perforated with single apertures by analysing the coupling of localized surface plasmon polaritons (LSPPs). It is found that the amplitude and the wavelength of transmission peak in such a structure can be adjusted by changing the longitudinal interval D between two films and the lateral displacements d_{x} and d_{y} which are parallel and perpendicular to the polarization direction of incident light, respectively. The variation of longitudinal interval D results in the redshift of transmission peak due to the change of coupling strength of LSPPs near the single apertures. The amplitude of transmission peak decreases with the increase of d_{y} and is less than that in the case of d_{x}, which originates from the difference in coupling manner between LSPPs and the localized natures of LSPPs.     

相对孔径为1∶1镜头的光学系统设计

介绍一种相对孔径为1:1的光谱摄像镜头。利用非球面光学表面将复杂化的Petzval型结构形式改进为3片结构,其主要光学参数f′=120mm，F=1，τ≥90%，系统MTF=0.85时的成像质量所对应的空间频率大于20lp/mm。结合非球面加工工程化研究需要对该镜头的结构进行优化，给出了多种像差曲线及MTF数据，并对未来可进行的进一步改进进行了探讨。     

基于传输线等效法的双腔体屏蔽系数快速算法

传输线等效法（TLM）是一种常用的开孔腔屏蔽系数快速计算方法,在孔缝耦合系数的计算中考虑了孔缝处的场模式,提高了TLM算法在高频段计算屏蔽系数（SE）的准确性。继而将TLM算法推广到开孔双金属腔屏蔽系数的计算,通过将外腔体中任意位置的电压等效为内孔缝处的辐射电压源,计算得到内腔体中任意位置上的屏蔽系数,解决了已有文献中方法的不足。该算法计算结果与CST仿真结果吻合较好。     

一个有效减小透射式液晶后续光学系统口径的方法

由于液晶结构的特殊性 ,在液晶 (尤其是透射式液晶 )的后续光学系统设计中 ,要求有比较小的F数 ,这给光学系统设计带来了困难。提出了一个在液晶平面上添加场镜的方法 ,可以有效地降低对后续光学系统口径的要求 ,并且在实验中证明了该方法有效实用     

Highly efficient silver particle layers on glass substrate synthesized by the sonochemical method for surface enhanced Raman spectroscopy purposes

A fast method for preparing of silver particle layers on glass substrates with high application potential for using in surface enhanced Raman spectroscopy (SERS) is introduced. Silver particle layers deposited on glass cover slips were generated in one-step process by reduction of silver nitrate using several reducing agents (ethylene glycol, glycerol, maltose, lactose and glucose) under ultrasonic irradiation. This technique allows the formation of homogeneous layers of silver particles with sizes from 80 nm up to several hundred nanometers depending on the nature of the used reducing agent. Additionally, the presented method is not susceptible to impurities on the substrate surface and it does not need any additives to capture or stabilize the silver particles on the glass surface. The characteristics of prepared silver layers on glass substrate by the above mentioned sonochemical approach was compared with chemically prepared ones. The prepared layers were tested as substrates for SERS using adenine as a model analyte. The factor of Raman signal enhancement reached up to 5·10⁵. On the contrary, the chemically prepared silver layers does not exhibit almost any pronounced Raman signal enhancement. Presented sonochemical approach for preparation of silver particle layers is fast, simple, robust, and is better suited for reproducible fabrication functional SERS substrates than chemical one.     

Axial performance parameters developed for analytical design of center shaded filter in high aperture focusing system

In order to establish the explicit interrelation between the performance and structure parameters of a center shaded filter in high aperture focusing systems, approximate integral equations are proposed and further used to derive axial performance parameters, which are required for the evaluation of axial energy loss and focal depth extension. It has been derived that the axial intensity can be analytically expressed as a square of sinc function and the shaded angle of a center shaded filter can be explicitly calculated using either the expected Strehl ratio or axial gain. The developed axial performance parameters are proved through simulation to be precisely consistent with numerical evaluation results.