Synthesis and room-temperature NO_2 gas sensing properties of a WO_3 nanowires/porous silicon hybrid structure

We report on the fabrication and performance of a room-temperature NO2 gas sensor based on a WO3 nanowires/porous silicon hybrid structure. The W18O49 nanowires are synthesized directly from a sputtered tungsten film on a porous silicon （PS） layer under heating in an argon atmosphere. After a carefully controlled annealing treatment, WO3 nanowires are obtained on the PS layer without losing the morphology. The morphology, phase structure, and crystallinity of the nanowires are investigated by using field emission scanning electron microscopy （FESEM）, X-ray diffractometer （XRD）, and high-resolution transmission electron microscopy （HRTEM）. Comparative gas sensing results indicate that the sensor based on the WO3 nanowires exhibits a much higher sensitivity than that based on the PS and pure WO3 nanowires in detecting NO2 gas at room temperature. The mechanism of the WO3 nanowires/PS hybrid structure in the NO2 sensing is explained in detail.     

Template-free hydrothermal synthesis of ZnO microrods for gas sensor application

Zinc oxide microrods with controlled diameter were prepared without the addition of template and additive by a simple hydrothermal route only using Zn(CH₃COO)₂·2H₂O as a precursor. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), and electron diffraction (ED). The crystal structure of prepared ZnO microrods is hexagonal phase polycrystalline with zincite structure. With the increase of the precursor concentration from 0.05 M to 0.6 M, the diameter of the ZnO microrods increased from 1 μm to 5 μm. A localized oriented attachment mechanism was prepared to account for the formation of ZnO microrods. The gas-sensing performance experiments indicated that the prepared ZnO microrods exhibited highly sensitive, selective gas-sensing properties, and good stability to acetone vapor. The response and recovery time of ZnO-based gas sensor to 100 ppm acetone vapor are 12 s and 18 s, respectively. The mechanism of the ZnO-based sensor was investigated.     

Solution-processed Au@rGO/GaN nanorods hybrid-structure for self-powered UV,visible photodetector and CO gas sensors

Although metal nanoparticles (NPs) have been widely reported, Au NPs functionalized reduced graphene oxide (rGO)/GaN nanorods (NRs) for multi-functional applications are rarely discussed. The rGO is a well known transparent electrode and has been considering an alternative electrode to ITO in the current optoelectronic community. In this work, Au NPs functionalized rGO (Au@rGO)/GaN NRs hybrid structure probed for photodetector and CO gas sensing applications. The hybrid structure was characterized by scanning electron microscopy, transmission electron microscope, current-voltage characteristics, photo conductivity, and gas sensor measurements. The Au@rGO/GaN NRs showed higher photoresponsivity (λ = 382 nm, 516 nm) compared to rGO/GaN NRs at room temperature. The rising and falling times of Au@rGO/GaN NRs are faster than that of rGO/GaN NRs. The hybrid structure Au@rGO/GaN NRs exhibited high CO gas response compared to rGO/GaN NRs at room temperature (∼38% to the 20 ppm). Au NPs played an important role in terms of electronic and chemical changes in the hybrid structure for improving both photodetectors the CO gas response. Such a multi-functional hybrid device is an interest of various room temperature applications.     

Sn掺杂ZnO薄膜的室温气敏性能及其气敏机理

采用化学气相沉积方法在预制好电极的玻璃基底上制备出Sn掺杂ZnO薄膜和纯ZnO薄膜. 两种样品典型的形貌为四足状ZnO晶须, 其直径约为150-400 nm, 呈疏松状结构. 气敏测试结果显示Sn掺杂ZnO薄膜具有优良的室温气敏性, 并对乙醇具有良好的气敏选择性, 而纯ZnO薄膜在室温条件下对乙醇和丙酮均没有气敏响应. X射线衍射结果表明两种样品均为六方纤锌矿结构. Sn掺杂ZnO样品中没有出现Sn及其氧化物的衍射峰, 其衍射结果与纯ZnO样品对比, 衍射峰向小角度偏移. 光致发光结果表明, Sn掺杂ZnO薄膜与纯ZnO薄膜均出现紫外发光峰和缺陷发光峰, 但是Sn的掺杂使得ZnO的缺陷发光峰明显增强. 将Sn掺杂ZnO样品在空气中退火后, 其室温气敏性消失, 说明Sn掺杂ZnO样品的室温气敏性可能与其缺陷含量高有关. 采用自由电子散射模型解释了Sn掺杂ZnO薄膜的室温气敏机理.     

Preparation and optical properties of ZnGa2O4:Cr thin films derived by sol-gel process

ZnGa₂O₄:Cr³⁺ thin films with bright red emission were synthesized using a sol-gel process, characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Auger electron spectroscopy (AES) and UV-vis and fluorescence spectrophotometry measurements. Effects of calcining temperature, film thickness, calcining duration and substrates on the crystal structure and photoluminescent property have been investigated. It is found that the crystallinity, Ga/Zn ratio and band gap energy (E_g) are significant factors influencing optical characteristics, while the nature of substrates affect the surface morphologies of ZnGa₂O₄:Cr³⁺ thin films.     

Study of the synthesis and Cl2 gas-sensing properties of nanometer HNO3-doped SnO2

We focused on the effects of the inorganic acid HNO₃ on the gas-sensing properties of nanometer SnO₂ and prepared the powders via a dissolution-pyrolysis method. Furthermore, the powders were characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray spectra (EDS). Several aspects were surveyed, including the calcining temperature, concentration of nitric acid and the working temperature. The results showed that the gas response of 3 wt% HNO₃-doped SnO₂ powders (calcined at 500 °C) to 10 ppm Cl₂ reached 316.5, at the working temperature 175 °C. Compared with pure SnO₂, appropriate HNO₃ could increase the gas sensitivity to Cl₂ gas more significantly.     

多孔ZnO微米球的制备及其优异的丙酮敏感特性

以六水合硝酸锌、尿素为原料,以六亚甲基四胺为表面活性剂,利用水热法合成了多孔氧化锌微米球.通过X射线衍射仪、扫描电子显微镜和吸附仪对样品的结构、形貌、比表面积和孔径进行了表征.利用所得多孔微米球氧化锌制备了气敏元件,并对其气敏特性进行了测试.结果表明:在280℃的工作温度下,表面多孔氧化锌微米球气敏元件对50 ppm的丙酮气体的灵敏度为26.8,响应时间和恢复时间分别约为4 s和10 s,并具有良好的选择性.     

n型有序多孔硅基氧化钨室温气敏性能研究

利用电化学腐蚀方法制备了n型有序多孔硅, 并以此为基底用直流磁控溅射法在其表面溅射不同厚度的氧化钨薄膜. 利用X射线和扫描电子显微镜表征了材料的成分和结构, 结果表明, 多孔硅的孔呈柱形有序分布, 溅射10 min的WO₃薄膜是多晶结构, 比较松散地覆盖在整个多孔硅的表面. 分别测试了多孔硅和多孔硅基氧化钨在室温条件下对二氧化氮的气敏性能, 结果表明, 相对于多孔硅, 多孔硅基氧化钨薄膜对二氧化氮的气敏性能显著提高. 对多孔硅基氧化钨复合结构的气敏机理分析认为, 多孔硅和氧化钨薄膜复合形成的异质结对良好的气敏性能起到主要作用, 氧化钨薄膜表面出现了反型层引起了气敏响应时电阻的异常变化. 关键词： 有序多孔硅 氧化钨薄膜 二氧化氮 室温气敏性能     

Highly sensitive and selective trimethylamine sensors based on WO3 nanorods decorated with Au nanoparticles

One-dimensional tungsten oxide (WO₃) gas sensing materials have been widely used for the detection of trimethylamine (TMA) gas. Furthermore, it is believed that an effective method to improve the gas sensing performance is to introduce noble metals into sensing materials. In this work, a novel gas sensing material was prepared by decorating Au nanoparticles on WO₃ nanorods. Based on field emission scanning electron microscopy (FESEM/EDS), X-ray diffraction (XRD), and transmission electron microscopy (TEM), the morphology and microstructure of as-prepared samples were characterized. Results show that Au nanoparticles with diameter of 13–15 nm are loaded on the surface of WO₃ nanorods with length of about 1–2 µm and width of 50–80 nm. Gas sensing tests reveal that the Au@WO₃ sensor has remarkably enhanced response to TMA gas compared with pure WO₃ nanorods. In addition, and the gas sensing mechanism has been investigated based on the experimental results. The superior sensing features indicate the present Au@WO₃ nanocomposites are promising for gas sensors, which can be used in the detection of the trimethylamine gas and this work provides insights and strategies for the fabrication of sensing materials.     

氧化钨纳米线气敏传感器的制备及其室温NO_2敏感特性

纳米结构的氧化钨有高比表面积和气体吸附能力,在气体传感器领域得到了广泛研究.本文采用磁控溅射金属钨薄膜和两步热氧化工艺在二氧化硅衬底上生长出氧化钨纳米线.通过改变第二步氧化温度,研究退火温度对氧化钨纳米线气敏特性的影响.采用扫描电子显微镜、X射线衍射仪、X射线光电子能谱分析仪和透射射电子显微镜表征材料的微观特性和晶体结构,利用静态配气法测试气敏性能.研究结果表明,经过退火处理后氧化钨纳米线密度略微降低,300℃比400℃退火后的氧化钨结晶性差,对应的表面态含量多,有利于室温气体敏感性.测试NO_2的气敏性能,经过对比得出300℃退火温度下制备的氧化钨纳米线在室温下表现出较很好的气敏响应,对6 ppm(1 ppm=10~(-6))NO_2达到2.5,对检测极限0.5 ppm NO_2响应达1.37.氧化钨纳米线在室温下表现出反常的P型响应,是因为氧化钨纳米线表面被氧气吸附形成反型层,空穴取代电子成为主要载流子所致.     

Influence of pH in La-doped SnO2 nanoparticles towards sensor applications

The present investigation has been carried out to optimize the pH level of lanthanum (La)-doped tin dioxide (SnO₂) nanoparticles towards the potential application in gas sensor. The La-doped SnO₂ nanoparticles were synthesized by sol-gel method in different pH values varying from acidic to base nature. The synthesized nanoparticles were characterized by X-ray diffraction (XRD), ultraviolet (UV), photoluminescence (PL), and scanning electron microscopy (SEM) techniques. The XRD, UV, and PL analyses show the pH influences on the crystallite size of La-doped SnO₂ nanoparticles. The SEM images show the formation of porous structure at pH 11. Also, the electrical conductivity of 1 mol% La-doped SnO₂ at pH 3 and pH 11 were measured by impedance analyzer. In addition, we have fabricated and demonstrated device performance of synthesized La-doped SnO₂ nanoparticles for gas-sensing application. Real-time current response and long-time response to the gas sensing were also studied for the fabricated device.

     

硅衬底上Zn1-xMgxO薄膜的结构与光学性质

采用脉冲激光法（PLD）在Si衬底上沉积Zn1-xMgxO薄膜.x射线衍射(XRD)表明薄膜为c轴取向，（002）峰的半高宽仅为0.211°，且没有MgO的相偏析.透射电子显微镜可以清楚看到Zn1-xMgxO薄膜的c轴择优取向.在选区电子衍射图中可以看到Zn1-xMgxO结晶薄膜整齐的衍射斑点.室温下对Zn1-xMgxO薄膜进行了光致荧光光谱分析，发现其带边发射峰相对ZnO晶体有0.4eV的蓝移，带边发射峰与杂质发射峰的强度之比高达159.Zn1-xMgxO结晶薄膜质量良好，显示了应用于光电器件的潜力. 关键词： Zn1-xMgxO合金薄膜 硅衬底 脉冲激光沉积法 c轴取向 光致荧光光谱     

Interfacial p-n heterojunction of polyaniline-nickel ferrite nanocomposite as room temperature liquefied petroleum gas sensor

In this work, we introduce polyaniline–nickel ferrite (PANI-NF) nanostructured composite to detect liquefied petroleum gas (LPG) at room temperature. The composite synthesized by relatively simple method of in-situ chemical polymerization was structurally characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. The presence of characteristic absorption bands of both PANI and NF in the FTIR spectrum of the composite with small shifts confirmed interfacial interaction of PANI with NF. The XRD studies also confirmed interfacial interaction between PANI and NF in the composite and its crystalline nature with an average crystallite size of 20 nm. Highly agglomerated granular porous morphology favourable for LPG adsorption was revealed by SEM image of the composite. The TEM image of the composite clearly showed nanosized NF particles embedded in PANI matrix. The LPG sensing performance of the composite at room temperature was tested using a film prepared by depositing the composite on an ordinary glass substrate by cost-effective spin coating technique. The maximum sensing response of the composite was found to be 57% at 700 ppm of LPG, with a response time of 50 s and a recovery time of 200 s. The composite was found to be stable for a period of one month. The sensing mechanism has been discussed on the basis of formation of interfacial p–n heterojunction barrier.     

Synthesis of coryphantha elephantidens-like SnO2 nanospheres and their gas sensing properties

In this work, coryphantha elephantidens-like SnO₂ with porous structures were prepared successfully by a simple hydrothermal route, through adjusting the temperature of hydrotherm. Its morphology was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET). Compared to the regular nanospheres, the coryphantha elephantidens-like SnO₂ nanospheres had obviously higher gas-sensing response, owing to the special structure with large specific surface area (161.16 m² g^?1). It surprised us that the coryphantha elephantidens-like SnO₂ sensor could easily distinguish between ethanol and acetone, whose chemical property were similar. Moreover, it also exhibited wide measurement range, fast response speed (less than 10 s) and good repeatability at a low temperature (180 °C) to ethanol. The desirable specific surface area and pore volume were conducive to molecules adsorption and diffusion, which were believed to be the major cause of the improvement of gas sensing performance.     

Excellent acetone sensing properties of porous ZnO

Porous Zn O was obtained by hydrothermal method.The results of scanning electron microscope revealed the porous structure in the as-prepared materials.The acetone sensing test results of porous Zn O show that porous Zn O possesses excellent acetone gas sensing properties.The response is 35.5 at the optimum operating temperature of 320?C to 100 ppm acetone.The response and recovery times to 50 ppm acetone are 2 s and 8 s,respectively.The lowest detecting limit to acetone is 0.25 ppm,and the response value is 3.8.Moreover,the sensors also exhibit excellent selectivity and long-time stability to acetone.     

汽相沉积法SnO_2薄膜光谱透过率气敏特性的研究

本文研究了用汽相沉积法制备ＳｎＯ２气敏薄膜和ＳｎＯ２膜的光谱透过率气敏特性。用汽相沉积制备ＳｎＯ２的方法是利用一个密封的石英管系统，把ＳｎＣｌ４溶液置于系统内，氧气通人系统，然后系统升温使ＳｎＣｌ４气化，通过控制氧气流量、沉积温度和沉积时间等，使气化后的Ｓｎ原子与氧原子在一定条件下生成ＳｎＯ２，沉积在玻璃衬底上。本文用ＡＳ－４３０Ｓ俄歇式电子能谱仪测试膜片的主要成分，并用光栅单色仪测试了膜片在乙醇还原性气体中的气敏特性。实验结果表明：与热喷法制备的ＳｎＯ２膜比较，沉积法具有工艺重复性好，可以控制沉积膜的厚度，灵敏度高等优点。因此，可制备出有选择性的“气敏－光透过率”型气敏传感器。     

Preparation and room temperature NO_2-sensing performances of porous silicon/V_2O_5nanorods

In this paper, porous silicon/V₂O₅ nanorod composites are prepared by a heating process of as-sputtered V film on porous silicon (PS) at 600 ℃ for different times (15, 30, and 45 min) in air. The morphologies and crystal structures of the samples are investigated by field emission scanning electron microscope (FESEM), x-ray diffractometer (XRD), x-ray photoelectron spectroscopy (XPS), and Raman spectrum (RS). An improved understanding of the growth process of V₂O₅ nanorods on PS is presented. The gas sensing properties of samples are measured for NO₂ gas of 0.25 ppm～3 ppm at 25 ℃. We investigate the effects of the annealing time on the NO₂-sensing performances of the samples. The sample obtained at 600 ℃ for 30 min exhibits a very strong response and fast response-recovery rate to ppm level NO₂, indicating a p-type semiconducting behavior. The XPS analysis reveals that the heating process for 30 min produces the biggest number of oxygen vacancies in the nanorods, which is highly beneficial to gas sensing. The significant NO₂ sensing performance of the sample obtained at 600 ℃ for 30 min probably is due to the strong amplification effect of the heterojunction between PS and V₂O₅ and a large number of oxygen vacancies in the nanorods.     

Facile synthesis of SnO2–ZnO core–shell nanowires for enhanced ethanol-sensing performance

The design of core–shell heteronanostructures is powerful tool to control both the gas selectivity and the sensitivity due to their hybrid properties. In this work, the SnO₂–ZnO core–shell nanowires (NWs) were fabricated via two-step process comprising the thermal evaporation of the single crystalline SnO₂ NWs core and the spray-coating of the grainy polycrystalline ZnO shell for enhanced ethanol sensing performance. The as-obtained products were investigated by X-ray diffraction, scanning electron microscopy, and photoluminescence. The ethanol gas-sensing properties of pristine SnO₂ and ZnO–SnO₂ core–shell NW sensors were studied and compared. The gas response to 500 ppm ethanol of the core–shell NW sensor increased to 33.84, which was 12.5-fold higher than that of the pristine SnO₂ NW sensor. The selectivity of the core–shell NW sensor also improved. The response to 100 ppm ethanol was about 14.1, whereas the response to 100 ppm liquefied petroleum gas, NH₃, H₂, and CO was smaller, and ranged from 2.5 to 5.3. This indicates that the core–shell heterostructures have great potential for use as gas sensing materials.     

Gas-Sensing Hollow-Core Waveguide Based on a Liquid Film

In this paper, a strategy for the fabrication of a gas-sensing hollow-core waveguide with liquid film was developed to replace the traditional solid film hollow-core waveguide. The surface morphologies of the solid film and liquid film were characterized by scanning electron microscopy, respectively. Compared with the solid film, liquid film can dissolve gas molecules and enhance the gas sensitivity, especially in the range of low concentration. An improved absorption for detecting 1000 ppm of acetylene has been achieved when liquid film was adopted instead of solid film.     

Characterization of ZnS nanoparticles synthesized by co-precipitation method

ZnS nanoparticles are prepared by homogeneous chemical co-precipitation method using EDTA as a stabilizer and capping agent. The structural, morphological, and optical properties of as-synthesized nanoparticles are investigated using x-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, ultraviolet-visible(UV-Vis)absorption, and photoluminescence spectroscopy. The x-ray diffraction pattern exhibits a zinc-blended crystal structure at room temperature. The average particle size of the nanoparticles from the scanning electron microscopy image is about50 nm. The ultraviolet absorption spectrum shows the blue shift in the band gap due to the quantum confinement effect.The photoluminescence spectrum of Zn S nanoparticles shows a blue visible spectrum.