Effect of Mn substitution on superconductivity in iron selenide(Li,Fe)OHFeSe single crystals

We synthesize a series of Mn substituted(Li, Fe)OHFeSe superconductor single crystals via a modified ion-exchange method, with the Mn concentration z(the atomic ratio of Mn:Se) ranging from 0 to 0.07. The distribution homogeneity of the Mn element incorporated into the lattice of(Li, Fe)OHFeSe is checked by combined measurements of high-angleannular-dark-field(HAADF) imaging and electron energy-loss spectroscopy(EELS). Interestingly, we find that the superconducting transition temperature T_c and unit cell parameter c of the Mn-doped(Li, Fe)OHFeSe samples display similar V-shaped evolutions with the increasing dopant concentration z. We propose that, with increasing doping level, the Mn dopant first occupies the tetrahedral sites in the(Li, Fe)OH layers before starting to substitute the Fe element in the superconducting Fe Se layers, which accounts for the V-shaped change in cell parameter c. The observed positive correlation between the T_c and lattice parameter c, regardless of the Mn doping level z, indicates that a larger interlayer separation, or a weaker interlayer coupling, is essential for the high-T_c superconductivity in(Li, Fe)OHFeSe. This agrees with our previous observations on powder, single crystal, and film samples of(Li, Fe)OHFeSe superconductors.     

Synthesis of a new alkali metal-organic solvent intercalated iron selenide superconductor with T(c)?≈?45?K

We report on a new iron selenide superconductor with a T(c) onset of 45?K and the nominal composition Li(x)(C(5)H(5)N)(y)Fe(2-z)Se(2), synthesized via intercalation of dissolved alkaline metal in anhydrous pyridine at room temperature. This superconductor exhibits a broad transition, reaching zero resistance at 10?K. Magnetization measurements reveal a superconducting shielding fraction of approximately 30%. Analogous phases intercalated with Na, K and Rb were also synthesized and characterized. The superconducting transition temperature of Li(x)(C(5)H(5)N)(y)Fe(2-z)Se(2) is clearly enhanced in comparison to those of the known superconductors FeSe(0.98) (T(c)?～?8?K) and A(x)Fe(2-y)Se(2) (T(c)?～?27-32?K) and is in close agreement with critical temperatures recently reported for Li(x)(NH(3))(y)Fe(2-z)Se(2). Post-annealing of intercalated material (Li(x)(C(5)H(5)N)(y)Fe(2-z)Se(2)) at elevated temperatures drastically enlarges the c-parameter of the unit cell (～44%) and increases the superconducting shielding fraction to nearly 100%. Our findings indicate a new synthesis route leading to possibly even higher critical temperatures for materials in this class: by intercalation of organic compounds between Fe-Se layers.     

Superconductivity in Li OHFe S single crystals with a shrunk c-axis lattice constant

By using a hydrothermal ion-exchange method, we have successfully grown superconducting crystals of Li OHFe S with Tcof about 2.8 K. Being different from the sister sample(Li1-xFex)OHFe Se, the energy dispersion spectrum analysis on Li OHFe S shows that the Fe/S ratio is very close to 1:1, suggesting an almost charge neutrality and less electron doping in the Fe S planes of the system. Comparing with the non superconducting Li OHFe S crystal, each peak of the X-ray diffraction pattern of the superconducting crystal splits into two, and the diffraction peaks locating at lower reflection angles are consistent with that of non-superconducting ones. The rest set of diffraction peaks with higher reflection angles is corresponding to the superconducting phase, suggesting that the superconducting phase may has a shrunk c-axis lattice constant. Magnetization measurements indicate that the magnetic shielding due to superconductivity can be quite high under a weak magnetic field. The resistivity measurements under various magnetic fields show that the upper critical field is quite low, which is similar to the tetragonal Fe S superconductor.     

第一性原理计算：锰酸锂掺杂Fe和Co的性质研究

文章基于密度泛函理论的第一性原理计算,研究了LiMn2O4电池材料在掺杂Fe和Co离子时的电子结构和电化学性能。发现Fe\Co取代Mn3+在热力学上是会更加稳定,提升电化学性能。掺杂Fe后,LiMn2O4电池材料晶格参数减小(约0.3%);掺杂Co后,LiMn2O4电池材料晶格参数减小(约0.5%)。这两种掺杂方式让与之相邻的Mn3+被氧化成Mn4+,从而降低了Jahn-Teller畸变情况产生可能性。对于掺Fe尖晶石型锰酸锂(Li8Mn15FeO32),Mn环境中的Li离子会更容易被提取,第一次放电电压从原来的3.7V增加至4.623V;对于掺Co尖晶石型锰酸锂(Li8Mn15CoO32),第一次放电电压从原来的3.7V增加至4.101V。研究为锂电池电容量研究提供理论数据的参考。     

Superconductivity at 44.4 K achieved by intercalating EMIM~+ into FeSe

Superconductivity with transition temperature Tc above 40 K was observed in protonated Fe Se(Hy-Fe Se) previously with the ionic liquid EMIM-BF4 used in the electrochemical process. However, the real superconducting phase is not clear until now. And detailed structural, magnetization, and electrical transport measurements are lacking. By using similar protonating technique on Fe Se single crystals, we obtain superconducting samples with Tc above 40 K. We show that the obtained superconducting phase is not Hy-Fe Se but actually an organic-ion(C_6H_(11)N_2~+ referred to as EMIM~+)-intercalated phase(EMIM)x Fe Se. By using x-ray diffraction technique, two sets of index peaks corresponding to different c-axis lattice constants are detected in the obtained samples, which belong to the newly formed phase of intercalated(EMIM)_x Fe Se and the residual Fe Se, respectively. The superconductivity of(EMIM)x Fe Se with Tc of 44.4 K is confirmed by resistivity and magnetic susceptibility measurements. Temperature dependence of resistivity with different applied magnetic fields reveals that the upper critical field H_(c2) is quite high, while the irreversibility field Hirris suppressed quickly with increasing temperature till about 20 K. This indicates that the resultant compound has a high anisotropy with a large spacing between the Fe Se layers.     

Doping Mn into(Li_(1-x)Fe_x)OHFe_(1-y)Se superconducting crystals via ion-exchange and ion-release/introduction syntheses

We report the success in introducing Mn into(Li_(1-_x)Fe_x)OHFe_(1-y) Se superconducting crystals by applying two different hydrothermal routes, ion e_xchange(1-step) and ion release/introduction(2-step). The micro-region _x-ray diffraction and energy dispersive _x-ray spectroscopy analyses indicate that Mn has been doped into the lattice, and its content in the 1-step fabricated sample is higher than that in the 2-step one. Magnetic susceptibility and electric transport properties reveal that Mn doping influences little on the superconducting transition, regardless of 1-step or 2-step routes. By contrast, the characteristic temperature T*, at which the negative Hall coefficient reaches its minimum, is significantly reduced by Mn doping.This implies that the hole carriers contribution is obviously modified, and hence the hole band might have no direct relationship with the superconductivity in(Li_(1-_x)Fe_x)OHFe_(1-y) Se superconductors. Our present hydrothermal methods of ion e_xchange and ion release/introduction provide an efficient way for elements substitution/doping into(Li_(1-_x)Fe_x)OHFe_(1-y) Se superconductors, which will promote the in-depth investigations on the role of multiple electron and hole bands and their interplay with the high-temperature superconductivity in the FeSe-based superconductors.     

新型超导材料MgCNi3的电子结构与超导电性研究

用MS-Xα方法研究了非氧化物超导材料MgCNi₃的电子结构. 研究结果显示, 态密度分布曲线的主峰靠近Fermi面, 主要来自于Ni的d电子的贡献. 用T(T=Co，Mn，Cu)替代MgCNi₃中的部分Ni形成化合物MgCNi₂T，替代使Ni的价电子数减小, 价态发生变化, Fermi面处态密度N(E_F)减小. 计算结果表明：无论是电子掺杂（Cu）还是空穴掺杂（Co，Mn），MgCNi₃的超导电 关键词： 电子结构 态密度 超导电性     

高压密封微波消解-ICP-AES法测定五种蒙药中无机元素

采用HNO3-HClO4消解体系分别对额日敦-乌日勒、德都红花七味丸、通拉嘎-5、乌珠目-7、给旺-9等五种蒙药样品进行高压微波消解制样,利用电感耦合等离子体原子发射光谱法(ICP-AES)同时测定了镁、铝、钙、铬、锰、铁、钴、镍、铜、锌、砷、硒、锶、钼、银、镉和铅等17种无机元素的含量。通过添加标准回收实验,回收率均在97.25%~106.35%之间,验证了分析数据的可靠性。所有元素测定结果的相对标准偏差均小于3.3%,具有良好的准确度和精密度。实验结果表明,其中常量元素Ca,Mg和Fe,Mn,Zn,Cu的含量较高,测定结果可为开发研制蒙药新制剂、研制蒙药的质量控制标准和提高蒙药药效提供理论依据。     

FeSe基超导单晶与薄膜研究新进展:自旋向列序、电子相分离及高临界参数

FeSe基超导体的超导临界温度可大范围调控,物理现象丰富,是非常规超导机理研究的热点.由于较高的超导临界参数及易于加工等特点,FeSe基超导体在超导应用开发方面也日益受到重视.大尺寸高质量的单晶和薄膜形态的FeSe基超导材料,对于相关基础科学研究和应用开发都极为重要.作者近年来先后开发和发明了水热离子交换（ion-exchange）、离子脱插（ion-deintercalation）、基底辅助水热外延生长方法,成功解决了二元FeSe和插层（Li,Fe）OHFeSe超导体高质量单晶和薄膜的生长和物性调控难题.进而在相关物理问题的研究中取得新进展,包括发现二元FeSe中自旋向列序与超导电性密切相关,观测到（Li,Fe）OHFeSe中的电子相分离现象.此外,（Li,Fe）OHFeSe超导薄膜呈现很高的超导临界电流密度和上临界磁场,其应用前景值得关注.     

Local features of the crystal structure of superconducting iron chalcogenides Fe(TeSe)<Subscript>1 – δ</Subscript>

The local crystal structure of superconducting powders of iron chalcogenides FeTe_xSe_1–x (x = 0.1, 0.22, 0.49, 0.8, 0.9) prepared by dry synthesis (without mineralizer) has been studied by EXAFS spectroscopy above the K Se and K Fe absorption edges in the temperature range of 80–300 K. The dependences of Se–Fe, Fe–Te, and Fe–Fe interatomic bond lengths and degrees of their local disordering (Debye–Waller factors) on the tellurium content and temperature have been obtained. Einstein temperatures characterizing the stiffness of each bond have been determined. The correlation of the Se–Fe bond stiffness with the dependence of the critical temperature of the superconducting transition T_c on the composition of the samples under study have been established, which indicates the specific role of the Se–Fe bond in the superconducting state formation in iron chalcogenides FeTe_xSe_1–x.     

The superconducting transition temperatures of Fe(1+x)Se(1-y), Fe(1+x)Se(1-y)Te(y) and (K/Rb/Cs)(z)Fe(2-x)Se2

In a recent contribution to this journal, it was shown that the transition temperatures of optimal high-T(C) compounds obey the algebraic relation T(C0) = k(-1)(B)/?ζ, where ? is related to the mean spacing between interacting charges in the layers, ζ is the distance between interacting electronic layers, β is a universal constant and k(B) is Boltzmann's constant. The equation was derived assuming pairing based on interlayer Coulomb interactions between physically separated charges. This theory was initially validated for 31 compounds from five different high-T(C) families (within an accuracy of ±1.37 K). Herein we report the addition of Fe(1+x)Se(1-y) and Fe(1+x)Se(1-y)Te(y) (both optimized under pressure) and A(z)Fe(2-x)Se(2) (for A = K, Rb or Cs) to the growing list of Coulomb-mediated superconducting compounds in which T(C0) is determined by the above equation. Doping in these materials is accomplished through the introduction of excess Fe and/or Se deficiency, or a combination of alkali metal and Fe vacancies. Consequently, a very small number of vacancies or interstitials can induce a superconducting state with a substantial transition temperature. The confirmation of the above equation for these Se-based Fe chalcogenides increases to six the number of superconducting families for which the transition temperature can be accurately predicted.     

Thermal expansion and Grüneisen parameters of Ba(Fe(1-x)Co(x))2As2: a thermodynamic quest for quantum criticality

Thermal expansion data are used to study the uniaxial pressure dependence of the electronic-magnetic entropy of Ba(Fe(1-x)Co(x))2As2. Uniaxial pressure is found to be proportional to doping and, thus, also an appropriate tuning parameter in this system. Many of the features predicted to occur for a pressure-tuned quantum critical system, in which superconductivity is an emergent phase hiding the critical point, are observed. The electronic-magnetic Grüneisen parameters associated with the spin-density wave and superconducting transitions further demonstrate an intimate connection between both ordering phenomena.     

亚热带自然林与人工林土壤重金属含量的研究

重金属是危害森林生态健康主要污染物之一.采用电感耦合等离子体发射光谱法与石墨炉原子吸收光谱法,首次比较了亚热带人工林和自然林土壤中13种重金属元素(Fe,Al,Ti,Cr,Cu,Mn,V,Zn,Ni,Co,Pb,Se,Cd)的含量.结果表明自然林土壤中Fe,Al,Ti,Cu,Mn,V,Zn,Ni,Co,Pb,Se,Cd...     

Potassium doping effect on the lattice softening and electronic structure of Ba(1-x)K(x)Fe(2)As(2) probed by X-ray absorption spectroscopy

Ba(1-x)K(x)Fe(2)As(2) superconducting samples (x = 0, 0.2, 0.4, 0.5) were synthesized by the solid-state reaction method. In this contribution the doping effect of potassium on the lattice dynamics in this newly discovered Ba(1-x)K(x)Fe(2)As(2) superconductor has been investigated by extended X-ray absorption fine-structure spectroscopy. The analysis shows that with potassium doping an increased disorder in the iron layers is mainly related to the softening of the Fe-Fe bond. Information about the electronic structure of these materials has also been obtained by looking at the X-ray absorption near-edge structure spectra that point out the presence of holes in the Fe-3d/As-4p hybridized orbital of the BaFe(2)As(2)-based system.     

Revised superconducting phase diagram of hole-doped Na(x)(H3O)(z)CoO2 x yH(2)O

We have studied the superconducting phase diagram of NaxCoO2.yH(2)O as a function of electronic doping, characterizing our samples both in terms of Na content x and the Co valence state. Our findings are consistent with a recent report that intercalation of H3O+ ions into NaxCoO2, together with water, acts as an additional dopant, indicating that Na substoichiometry alone does not control the electronic doping of these materials. We find a superconducting phase diagram where optimal T(C) is achieved through a Co valence range of 3.24-3.35, while T(C) decreases for materials with a higher Co valence. The critical role of dimensionality in achieving superconductivity is highlighted by similarly doped nonsuperconducting anhydrous samples, differing from the superconducting hydrate only in interlayer spacing.     

高分辨率光谱学揭示东太平洋CC区结核金属赋存状态及富集机制

赤道东太平洋克拉里昂-克利珀顿带(CCZ)是全球最有经济潜力的结核成矿带,存在巨量的Mn, Co, Ni, Cu, Zn和Li金属资源。前人对CCZ结核的研究偏重化学、矿物学分析,对结核显微纹层、金属赋存状态缺少高分辨率光谱学分析,制约了对金属富集机制的理解。采用扫描电镜(SEM)、 X射线衍射仪(XRD)、微区X射线荧光面扫(XRF)、激光剥蚀电感耦合多接受质谱仪(LA-ICP-MS)对克拉里昂-克利珀顿带结核的显微纹层展开高分辨率分析,结果表明结核是由水成层韵律和成岩层韵律交替形成的。水成层由水羟锰矿组成,具有低的Mn/Fe, Li, Ni, Cu, Zn和高的Co, Fe, Ti, V含量,推测受铁的羟基氧化物库仑力吸附作用和高价锰氧化物八面体的表面氧化作用,水成层吸纳高含量Co, Ti和V元素。成岩层矿物组分主要是水钠锰矿,吸纳高含量的Li, Ni, Cu和Zn,其吸纳能力随Mn/Fe升高而提高,当Mn/Fe>8达到峰值。笔者认为结核生长环境中的Mn和Fe相对通量控制了结核的矿物类型和化学组分,而金属通量也可能影响了结核的金属成分。     

土壤重金属沿山地森林海拔梯度的分布特征

采用电感耦合等离子体发射光谱法与石墨炉原子吸收光谱法,研究了14种重金属(Fe,Al,Ti,Cu,Cr,Mn,V,Zn,Ni,Co,Pb,Se,Cd,As)沿山地森林海拔梯度的分布特征.结果表明海拔梯度对14种重金属中的6种重金属浓度(Fe,A1,Ti,V,Pb与As)有显著的影响,对其他八种重金属浓度(Cu,Cr,M...     

Improved photovoltaic effects in Mn-doped BiFeO_3 ferroelectric thin films through band gap engineering

As a low-bandgap ferroelectric material, BiFeO_3 has gained wide attention for the potential photovoltaic applications,since its photovoltaic effect in visible light range was reported in 2009. In the present work, Bi(Fe, Mn)O_3thin films are fabricated by pulsed laser deposition method, and the effects of Mn doping on the microstructure, optical, leakage,ferroelectric and photovoltaic characteristics of Bi(Fe, Mn)O_3 thin films are systematically investigated. The x-ray diffraction data indicate that Bi(Fe, Mn)O_3 thin films each have a rhombohedrally distorted perovskite structure. From the light absorption results, it follows that the band gap of Bi(Fe, Mn)O_3 thin films can be tuned by doping different amounts of Mn content. More importantly, photovoltaic measurement demonstrates that the short-circuit photocurrent density and the open-circuit voltage can both be remarkably improved through doping an appropriate amount of Mn content, leading to the fascinating fact that the maximum power output of ITO/BiFe_(0.7)Mn_(0.3)O_3/Nb-STO capacitor is about 175 times higher than that of ITO/BiFeO_3/Nb-STO capacitor. The improvement of photovoltaic response in Bi(Fe, Mn)O_3 thin film can be reasonably explained as being due to absorbing more visible light through bandgap engineering and maintaining the ferroelectric property at the same time.     

Using elemental profiles and stable isotopes to trace the origin of green coffee beans on the global market

A broad elemental profile incorporating 54 elements (Li, Be, B, Na, Mg, Al, P, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se, Rb, Sr, Y, Mo, Pd, Ag, Cd, Sn, Sb, Te, Cs, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Dy, Er, Tm, Yb, Re, Ir, Pt, Au, Hg, Tl, Pb, Bi and U) in combination with δ(2) H, δ(13) C, δ(15) N and δ(18) O was used to characterise the composition of 62 green arabica (Coffea arabica) and robusta (Coffea canephora) coffee beans grown in South and Central America, Africa and Asia, the four most internationally renowned areas of production. The δ(2) H, Mg, Fe, Co and Ni content made it possible to correctly assign 95% of green coffee beans to the appropriate variety. Canonical discriminant analysis, performed using δ(13) C, δ(15) N, δ(18) O, Li, Mg, P, K, Mn, Co, Cu, Se, Y, Mo, Cd, La and Ce correctly traced the origin of 98% of coffee beans. Copyright ? 2012 John Wiley & Sons, Ltd.     

Modulation Mechanism of Transition Elements Fe and Mn on the Interface Bonding Performance of Bronze/Diamond Composites

The modulation mechanism of iron (Fe) and manganese (Mn) in transition-metal elements on the interface bonding and mechanical properties of bronze (Cu₃Sn)-based/diamond composites is investigated through first-principles calculations. Transition-elements-doping scenarios are investigated employing six-layer slab models. It is revealed that the doping of Fe or Mn can make the Cu₃Sn/diamond interface more stable, which effectively improves the wettability of the Cu₃Sn/diamond interface based on the calculation results and analysis of interface energy, differential charge density model, and density of states. However, co-doping with both Fe and Mn weakens the wettability of the Cu₃Sn/diamond interface. Finally, wettability tests and microstructure characterizations demonstrate that the doping of Fe and Mn represents an effective approach to controlling the interface bonding performance of bronze/diamond composites.