离子液体耦合有机过氧化物脱除二苯并噻吩的研究

以12-磷钨酸为催化剂,研究了离子液体耦合有机过氧化物脱除二苯并噻吩(DBT)。研究结果表明,单独使用离子[bmim]BF4、[bmim]PF6液体为萃取剂,脱硫率为27.78%~38.76%。以由等体积的H2O2与甲酸制成有机过氧化物为氧化剂,不使用催化剂和离子液体,温度70℃,反应时间6 h,DBT氧化为二苯并噻吩砜的比例为76.6%。在催化剂作用下,将离子液体与氧化剂耦合使用时,脱硫率明显提高。当催化剂与DBT的摩尔比为0.20∶1,氧化剂与DBT的体积比为10∶1,[bmim]PF6离子液体与DBT的体积比为1∶1,在70℃反应6 h后,脱硫率可达98.60%。耦合体系重复使用五次后,氧化脱硫活性没有明显降低。     

酸性离子液体萃取-氧化模拟油品脱硫研究

以酸性离子液体N-羧甲基吡啶硫酸氢盐(\[CH₂COOHPy\]HSO₄)为萃取剂和催化剂,过氧化氢为氧化剂,用于模拟油品(二苯并噻吩溶于正辛烷配制而成)萃取-氧化脱硫反应,考察过氧化氢用量、离子液体用量、反应温度和反应时间对脱硫率的影响。研究结果表明,当氧硫摩尔比(H₂O₂/S)为6,在10mL模拟油品中加入0.6mL离子液体, 50℃下反应40min,脱硫率可达99.7%。离子液体循环再生使用5次,脱硫率没有明显下降。     

Ionic liquid-supported TEMPO as catalyst in the oxidation of alcohols to aldehydes and ketones

We describe an efficient synthesis of an ionic liquid-supported TEMPO which was used for the oxidation of alcohols to aldehydes and ketones. The predictable solubility of ionic liquids allows an easy separation of the oxidation products from reagents. Furthermore, the oxidation can be carried out using an ionic liquid as the solvent instead of dichloromethane; and the IL-supported TEMPO can be recycled and used several times without the loss of efficiency.     

氨基醇杂多酸类离子液体催化环酮的Baeyer-Villiger氧化反应

合成了一系列氨基醇杂多酸类离子液体,并将其用于催化环酮的Baeyer-Villiger氧化反应.以2-庚基环戊酮为模板底物,H₂O₂为氧化剂,探究了此类氨基醇杂多酸类离子液体的催化活性,筛选出催化活性最高的催化剂为[Pro-ps]H₂PW₁₂O₄₀,最佳反应条件:n(2-庚基环戊酮)∶n(催化剂)∶n(H₂O₂)=1∶0. 03∶4,反应温度40℃,反应时间8 h,无溶剂.在最佳条件下,2-庚基环戊酮的转化率为98. 19%,产物δ-十二内酯的选择性可达82. 84%.水相中的离子液体[Pro-ps]H₂PW₁₂O₄₀经干燥后可以重复使用.经过5次循环使用后催化活性未见明显下降.[Pro-ps]H₂PW₁₂O₄₀还可用于催化其它多种环酮的Baeyer-Villiger氧化反应,结果表明,该催化剂具有良好的...     

Structural and NMR spectroscopic investigations of chair and twist conformers of the P2Se8(2-) anion

Four new salts of the P2Se8(2-) anion have been prepared, starting from easily available reagents using different reaction strategies including reaction of the elements, oxidation of P4Se3 with alkalimetal diselenides and elemental selenium, and the use of an ionic liquid as a reaction medium. Multinuclear NMR investigations show the presence of both chair-P2Se8(2-) and twist-P2Se8(2-) in solution, with twist-P2Se8(2-) being the predominant conformer. The interconversion between the two conformers is slow on the NMR time scale. Structural investigations of the new salts by single-crystal X-ray diffraction show that chair-P2Se8(2-) is the conformer mostly found in the solid state. A first structural characterization of twist-P2Se8(2-) is reported. The bonding situation in the P2Se8(2-) anion as well as the relative stability of the chair, twist, and boat conformers was elucidated by quantum chemical calculations.     

Baeyer-Villiger Oxidation of Cyclic Ketones Catalyzed by Amino Acid Ionic Liquids

A series of amino-acid-based ionic liquids was synthesized via one-step protonation of the corresponding L-amino acid by utilizing an array of proton sources. The catalytic activity of the amino-acid-based ionic liquids for the Baeyer-Villiger oxidation of cyclic ketones was investigated using cyclopentanone as a model cycloketone. The proline-based ionic liquid [ProH]CF₃SO₃ was shown to exhibit the best catalytic activity. The reaction condition was optimized to give the following reagent ratio of n(cyclopentanone):n(catalyst):n(H₂O₂)=1:0.06:4, 60℃ and 6 h. Under the optimum conditions, the conversion of cyclopentanone was 96.57% and the selectivity for δ-valerolactone was 73.01%. The catalytic activity was shown to be constant after 4 cycles. A simple treatment was allowed for the recover and the reuse of [ProH]CF₃SO₃. The successful utilization of [ProH]CF₃SO₃ to catalyze a host of cyclic ketones via Baeyer-Villiger oxidation clearly demonstrated the capacity of [ProH]CF₃SO₃ to tolerate variation in the substrate.     

Continuous flow hydroformylation of alkenes in supercritical fluid-ionic liquid biphasic systems

A process for the hydroformylation of relatively low volatility alkenes (demonstrated for 1-dodecene) in a continuous flow system is described. The catalyst is dissolved in an ionic liquid while the substrate and gaseous reagents are transported into the reactor dissolved in supercritical CO(2), which simultaneously acts as a transport vector for aldehyde products. Decompression of the fluid mixture downstream yields products which are free of both reaction solvent and catalyst. The use of rhodium complexes of triaryl phosphites leads to ligand degradation through reaction of the ionic liquid with water and subsequent attack of the released HF on the phosphite. Sodium salts of sulfonated phosphines are insufficiently soluble in the ionic liquids to obtain acceptable rates, but replacing the sodium by a cation similar to that derived from the ionic liquid, allows good solubility and activity to be obtained. The nature of the ionic liquid is very important in achieving high rates, with 1-alkyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amides giving the best activity if the alkyl chain is at least C(8). Catalyst turnover frequencies as high as 500 h(-1) have been observed, with the better rates at higher substrate flow rates. Rhodium leaching into the product stream can be as low as 0.012 ppm, except at low partial pressures of CO/H(2), when it is significantly higher. Oxygen impurities in the CO(2) feed can lead to oxidation of the phosphine giving higher rates, lower selectivities to the linear aldehyde, increased alkene isomerization and greater leaching of rhodium. However, it is found that under certain process conditions, the supercritical fluid-ionic liquid (SCF-IL) system can be operated continuously for several weeks without any visible sign of catalyst degradation. Comparisons with commercial hydroformylation processes are provided.     

Schiff碱式双功能离子液体的制备与表征

分步合成法了Schiff碱式双反应中心的功能化离子液体: 首先通过1-丙胺基-3-甲基咪唑氯与FeCl₃合成含有-NH₂的Fe基离子液体; 然后通过1,3-二氨基-2-丙醇与3,5-二叔丁基水杨醛合成Schiff碱配体H₂L及其Co配合物CoL, 再通过4-氯丁酰氯的酰氯基与配合物CoL的-OH反应生成含有-CH₂Cl的配合物CH₂Cl-CoL; 最后通过Fe基离子液体的-NH₂与配合物CH₂Cl-CoL的-CH₂Cl之间的键合反应合成Schiff碱式双功能离子液体. 通过有机元素分析、 红外光谱、 紫外-可见光谱、 核磁共振波谱、 电喷雾电离质谱、 电感耦合等离子体-质谱和拉曼光谱对各化合物进行了结构表征, 确定Schiff碱式双功能离子液体的阳离子为Schiff碱Co络合阳离子, 阴离子为Fe的络合阴离子.     

Metalloporphyrin and heteropoly acid catalyzed oxidation of CNOH bonds in an ionic liquid: biomimetic models of nitric oxide synthase

Water soluble iron(III) porphyrins and phosphotungstic acid in an ionic liquid are effective catalysts for the H₂O₂ mediated oxidation of the CNOH bond in N-hydroxyarginine and other oximes. The carbonyl compounds generated as the oxidation products can be easily isolated from the reaction media. These systems serve as biomimetic models of nitric oxide synthase (NOS) and the catalyst immobilized in an ionic liquid can be easily recycled and reused.     

吡啶甲磺酸盐离子液体的固载化及其在聚甲醛二甲醚合成中的催化作用

采用键合法将吡啶甲磺酸盐离子液体负载在HZSM-5分子筛上,得到分子筛负载型离子液体催化剂,并将其用于聚甲醛二甲醚(PODEn)的合成。X射线衍射、红外光谱和N2吸附-脱附表征结果显示,吡啶甲磺酸盐离子液体较好地固载于分子筛上。用于催化合成PODEn时较适宜的反应条件为:离子液体负载量0.25 g、甲醇与三聚甲醛的物质的量比(即醇醛比)1.5、110℃、反应时间3 h,催化剂用量为总反应物质量的2.2%。缩合产物中柴油添加组分PODE3~8收率可达67.35%;与单纯离子液体或分子筛催化效果相比,PODE3~8收率得到提高。固载化离子液体易回收,可重复利用;当重复使用3次后,PODE3~8收率仍能达到45.62%。     

酸功能化离子液体催化合成聚缩醛二甲醚

对以酸功能化离子液体[Hnmp]HSO4、[Hnmp]H2PO4、[Hnmp]PTSA和[PyN(CH2)3SO3H]HSO4催化三聚甲醛和甲醇缩合制备聚缩醛二甲醚(PODEn,n1)的反应进行了研究,考察了催化剂用量、物料配比、温度和时间等对反应活性的影响。结果表明,离子液体的催化活性与其酸性相关。[PyN(CH2)3SO3H]HSO4具有较高的催化活性;当[PyN(CH2)3SO3H]HSO4的用量为2.0%、甲醇和三聚甲醛的物质的量比为2.0、反应温度110℃、反应压力2.0 MPa、反应时间6 h时,三聚甲醛的转化率和PODE3~8的选择性分别为97.69%和32.54%。反应结束后,[PyN(CH2)3SO3H]HSO4与产物可自动分成两相。     

The Preparation of Ionic Liquid Catalysts and Their Catalytic Performance

Ionic liquid, a new type catalyst, was developed in recent years, on which some good catalytic performance appeared in some reactions such as olefins' oligomerization, hydrogenation and Freidel-Crafts reaction just for their strong electrophilic catalysis^[1]. However, it was reported that only in vacuum and seal condition ionic liquid could be prepared with the halogerated hydrocarbon and heterocyclic compounds or their homologues^[2]. So it was necessary to develop a new method to synthesize ionic liquid. Therefore, inert gases (such as N₂) protection instead of vacuum was employed in this experimental, and the rules of preparation parameters on the products' type and yield were investigated, based on which the catalytic performance of these ionic liquid was studied in a model reaction of new compound synthesis from methane and carbon dioxide.     

酸性离子液体催化合成N-氰乙基-N-羟乙基苯胺

N-氰乙基-N-羟乙基苯胺是一种具有广泛用途的染料中间体,针对传统合成方法中的缺陷,以1-丁基-3-甲基咪唑硫酸氢盐([BMIM]HSO 4)为催化剂,丙烯腈和N-羟乙基苯胺为原料,建立了N-氰乙基-N-羟乙基苯胺的绿色合成新工艺。系统考察了离子液体种类、离子液体用量、底物比例等因素的影响规律,结果表明,[BMIM]HSO 4用量为0.8 mmol,n(N-羟乙基苯胺)∶[KG-*3/5]n(丙烯腈)=1∶[KG-*3/5]1.2,反应温度为90℃,反应时间为12 h时,N-氰乙基-N-羟乙基苯胺产率最高(89%),离子液体循环使用5次后,催化活性基本保持不变。     

三氯化钌催化下环己烷和环己醇在离子液体中的氧化反应研究

在三氯化钌催化下,使用叔丁基过氧化氢在离子液体中可将环己烷和环己醇氧化为环己酮,结果表明环己醇的氧化具有较高的转化率和选择性．离子液体(bmim)^ PF6^-和催化剂三氯化钌均有一定的重复使用性．     

离子液体中CNT/nanoTiO_2-Pt膜电极电催化氧化葡萄糖

循环伏安法研究葡萄糖在离子液体[EMI]BF4中于碳纳米管/纳米TiO2膜载Pt(CNT/nanoTiO2-Pt)复合膜电极上的电催化氧化.结果表明,CNT/nanoTiO2-Pt电极对葡萄糖氧化具有高催化活性,氧化电位为-0.46V;在组成为离子液体与水的体积比为3∶1的电解液中,葡萄糖的氧化效果最好.电极反应过程受浓差极化控制.     

基于双醛基功能化离子液体构建电化学免疫传感器

合成了含双醛基的离子液体,此离子液体一端的醛基与修饰在电极表面的氨基发生共价键作用,将离子液体修饰在电极表面,另一端的醛基可用来固定抗体,构建电化学免疫传感器,实现对心肌肌钙蛋白I(cTnI)的检测。离子液体通过共价键作用固定在电极表面,不仅减少了从电极表面向检测溶液的渗透,提高传感器的稳定性,而且还可以直接固定抗体,不需要使用其他交联试剂;同时,离子液体可增强传感界面的导电性,提高传感器的灵敏度。在优化的实验条件下,传感器的线性范围为0.1~40 ng/mL,检出限为0.06 ng/mL。     

Synthesis of fluoromethylated materials derived from 2-trifluoromethyl acrylic acid phenethyl ester in an ionic liquid

Synthesis of fluoromethylated materials via Michael addition reaction catalyzed by l-proline in an ionic liquid, is described. Further, the synthesis and synthetic application of zinc reagents generated in an ionic liquid, giving trifluoromethylated materials, are described.     

Aromatic hydrocarbons, carbocyclic ligands spanning several oxidation states in both Main Group and transition elements. Recent advances with early transition d elements

In this paper some synthetic procedures to obtain (η⁶-arene)metal derivatives are reviewed. The metal-atom-arene-vapor co-condensation technique is the most appropriate to generate complexes of polycyclic aromatic hydrocarbons or heterocycles. As far as the aluminium halide-mediated synthesis is concerned, two classes of reaction are observed. When AlX₃ is used with a metal halide in the presence of an aromatic hydrocarbon in the absence of any reducing agent, AlX₃ can function as a dehalogenating agent, to give ionic compounds of general formula [M(η⁶-arene)n](AlX₄)_m, or it can add across the M---X bond with formation of M(μ-X)_nAlX_4−n systems. In both cases the metal displays its typical oxidation state. However, the use of AlX₃ in combination with aluminium (the Fischer-Hafner reducing system) affords ionic or covalent low-oxidation-state metal(η⁶-arene) complexes. Attention is focused on our most recent results concerning the synthesis, properties and reactivity of η⁶-arene derivatives of Group 4 and 5 elements, showing, inter alia, the first example of a tetraarylborate anion behaving as a 12-electron donor to one metal atom and low-valent η⁶-arene compounds as useful reagents in the inorganic and coordination chemistry of the corresponding metal in nonaqueous systems.     

Mehrfachbindungen zwischen Hauptgruppenelementen und Übergangsmetallen : XLVI. Organoeisen-Komplexe mit Selen-Brücken

The nucleophilicity of the bridging atom of the selenium complex (μ-Se)[(η⁵-C₅H₅)Fe(CO)₂]₂ (1) has been demonstrated by addition of the complex cation [(η⁵-C₅H₅)Fe(CO)₂]⁺: Reaction of 1 with the ionic complex [(η⁵-C₅H₅)Fe(CO)₂-(THF)][BF₄] cleanly yields the ionic trinuclear complex [(μ₃-Se)(η⁵-C₅H₅)-Fe(CO)₂₃][BF₄] (3). This addition reaction converts the bridging selenium atom from a bent FeSeFe structure into a flattened Fe₃Se pyramid (X-ray diffraction studies), without significant changes in the iron-selenium bond lengths (244.9(<1) pm and 242.7(1)/243.3(1)/244.8(1) pm, respectively). These bonds are considered to be single bonds in accord with the EAN rule.     

Formation and reactions of alkylzinc reagents in room-temperature ionic liquids

[reaction: see text] The presence of a suitable amount of bromide or chloride ions was found to be critical in forming the alkylzinc reagents from alkyl iodides and zinc metal in the room-temperature ionic liquid, N-butylpyridinium tetrafluoroborate. Beta-hydride transfer in the reactions of butylzinc reagents with aldehydes can also be reduced by a bromide ion.