Growth Parameters,Photosynthetic Performance,and Biochemical Characterization of Newly Isolated Green Microalgae in Response to Culture Condition Variations

This work aimed to characterize two native microalgal strains newly isolated from South Mediterranean areas and identified as Chlorella sorokiniana ES3 and Neochloris sp. AM2. The growth properties and biochemical composition of these microalgae were evaluated in different culture media (Algal, BG-11, f/2, and Conway). Among the tested media, nitrate- and phosphate-rich Algal medium provided the maximum biomass productivities (85.5 and 111.5 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively), while the nitrate- and phosphate-deficient f/2 medium resulted in the highest lipid productivities (24.1 and 35.8 mg l^?1 day^?1 for C. sorokiniana and Neochloris sp., respectively). The physiological state of both microalgae was investigated under different light and temperature levels using the pulse amplitude-modulated fluorometry. The better photosynthetic efficiency of C. sorokiniana was obtained at 23 °C with a light saturation of 156 μE m^?2 s^?1, while that of Neochloris sp. was achieved at 15 °C with a light saturation of 151 μE m^?2 s^?1. The analysis of fatty acid profile and biodiesel parameters revealed that C. sorokiniana, cultivated in Algal and f/2 media, can be considered as a suitable candidate for high-quality biodiesel production.     

Marine Diatom, Navicula sp. Strain JPCC DA0580 and Marine Green Alga, Chlorella sp. Strain NKG400014 as Potential Sources for Biodiesel Production

Marine diatom, strain JPCC DA0580, and marine green microalga strain NKG400014 were selected as high neutral lipid-producers from marine microalgal culture collection toward biodiesel production. These strains were tentatively identified as Navicula sp. and Chlorella sp., respectively, by 18S rDNA analysis. Growth and lipid accumulation conditions of both strains were analyzed by changing nutrient concentrations in growth media and initial illuminance intensity. The highest productivity of fatty acid methyl ester (FAME) reached to 154 mg/L/week for NKG400014 and 185 mg/L/week for JPCC DA0580. Gas chromatography/mass spectrometry analysis indicates that FAME fraction from NKG400014 mainly contained 9-12-15-octadecatrienoate (C18:3) and that from JPCC DA0580 mainly contained methyl palmitate (C16:0) and methyl palmitoleate (C16:1). Furthermore, calorimetric analysis revealed that the energy content of strain was 4,233?±?55 kcal/kg (i.e., 15.9?±?0.2 MJ/kg) for NKG400014 and 6,423?±?139 kcal/mg (i.e., 26.9?±?0.6 MJ/kg) for JPCC DA0580, respectively. The value from JPCC DA0580 was equivalent to that of coal. The strains NKG400014 and JPCC DA0580 will become a promising resource that can grow as dominant species in the open ocean toward production of both liquid and solid biofuels.     

Enhanced Biodegradation of Alkane Hydrocarbons and Crude Oil by Mixed Strains and Bacterial Community Analysis

In this study, two strains, Acinetobacter sp. XM-02 and Pseudomonas sp. XM-01, were isolated from soil samples polluted by crude oil at Bohai offshore. The former one could degrade alkane hydrocarbons (crude oil and diesel, 1:4 (v/v)) and crude oil efficiently; the latter one failed to grow on alkane hydrocarbons but could produce rhamnolipid (a biosurfactant) with glycerol as sole carbon source. Compared with pure culture, mixed culture of the two strains showed higher capability in degrading alkane hydrocarbons and crude oil of which degradation rate were increased from 89.35 and 74.32?±?4.09 to 97.41 and 87.29?±?2.41 %, respectively. In the mixed culture, Acinetobacter sp. XM-02 grew fast with sufficient carbon source and produced intermediates which were subsequently utilized for the growth of Pseudomonas sp. XM-01 and then, rhamnolipid was produced by Pseudomonas sp. XM-01. Till the end of the process, Acinetobacter sp. XM-02 was inhibited by the rapid growth of Pseudomonas sp. XM-01. In addition, alkane hydrocarbon degradation rate of the mixed culture increased by 8.06 to 97.41 % compared with 87.29 % of the pure culture. The surface tension of medium dropping from 73.2?×?10^?3 to 28.6?×?10^?3 N/m. Based on newly found cooperation between the degrader and the coworking strain, rational investigations and optimal strategies to alkane hydrocarbons biodegradation were utilized for enhancing crude oil biodegradation.     

Screening, Gene Sequencing and Characterising of Lipase for Methanolysis of Crude Palm Oil

Staphylococcus sp. WL1 lipase (LipFWS) was investigated for methanolysis of crude palm oil (CPO) at moderate temperatures. Experiments were conducted in the following order: searching for the suitable bacterium for producing lipase from activated sludge, sequencing lipase gene, identifying lipase activity, then synthesising CPO biodiesel using the enzyme. From bacterial screening, one isolated specimen which consistently showed the highest extracellular lipase activity was identified as Staphylococcus sp. WL1 possessing lipFWS (lipase gene of 2,244 bp). The LipFWS deduced was a protein of 747 amino acid residues containing an α/β hydrolase core domain with predicted triad catalytic residues to be Ser474, His704 and Asp665. Optimal conditions for the LipFWS activity were found to be at 55 °C and pH 7.0 (in phosphate buffer but not in Tris buffer). The lipase had a K _M of 0.75 mM and a V _max of 0.33 mM?min^?1 on p-nitrophenyl palmitate substrate. The lyophilised crude LipFWS performed as good as the commonly used catalyst potassium hydroxide for methanolysis of CPO. ESI-IT-MS spectra indicated that the CPO was converted into biodiesel, suggesting that free LipFWS is a worthy alternative for CPO biodiesel synthesis.     

Determination of nitrite, nitrate, bromide, and iodide in seawater by ion chromatography with UV detection using dilauryldimethylammonium-coated monolithic ODS columns and sodium chloride as an eluent

A method was developed for determination of inorganic anions, including nitrite (NO ₂ ^? ), nitrate (NO ₃ ^? ), bromide (Br^?), and iodide (I^?), in seawater by ion chromatography (IC). The IC system used two dilauryldimethylammonium bromide (DDAB)-coated monolithic ODS columns (50?×?4.6?mm i.d. and 100?×?4.6?mm i.d.) connected in series for separation of the ions. Aqueous NaCl (0.5?mol/L; flow rate, 3?mL/min) containing 5?mmol/L phosphate buffer (pH 5) was used as the eluent, and detection was with a UV detector at 225?nm. The monolithic ODS columns were coated and equilibrated with a 1-mmol/L DDAB solution (in H₂O/methanol, 90:10 v/v). The hydrophilic ions (NO ₂ ^? , NO ₃ ^? , and Br^?) were separated within 3?min and the retention time of I^? was 16?min. No interferences from matrix ions, such as chloride and sulfate ions, were observed in 35?‰ artificial seawater. The detection limits were 0.6?μg/L for NO ₂ ^? , 1.1?μg/L for NO ₃ ^? , 70?μg/L for Br^?, and 1.6?μg/L for I^? with a 200-μL sample injection. The performance of the coated columns was maintained without addition of DDAB in the eluent. The IC system was successfully applied to real seawater samples with recovery rates of 94–108?% for all ions.

Spectrophotometric determination of oxyhalides with N,N-diethylaniline

We have developed procedures for the spectrophotometric determination of ClO^?, BrO ₃ ^? , and IO ₃ ^? in waters of different origin. The procedures are based on the oxidation of N,N-diethylaniline in acidic media and their detection limits (by 3s criterion) are 0.04, 0.18, and 0.53 ??g/mL, respectively. The calibration curves are linear in the concentration ranges 0.1?C2.0, 0.4?C12.5, and 1.6?C40 ??g/mL, respectively. The procedures provide simple and rapid determination of these analytes.     

Biodiesel production and comparison using commercial lipase and chemical catalyst from Cassia auriculata oil

In this present investigation, Cassia auriculata was explored as a feedstock for production of biodiesel. Transesterification reaction was performed by both enzyme (lipase) and chemical (potassium hydroxide) catalyst with diverse acyl acceptors such as methanol, ethanol, propanol, n-propanol, butanol, n- butanol, and finally their biodiesel yield were also recorded. Process optimization was performed by both one factor at a time method and response surface method. The maximal biodiesel yield of 92% (weight/weight) was obtained at the following optimal conditions: Oil:Methanol molar ratio of 1:6 (moles/moles), the lipase concentration of 2% (weight/weight), at 35 ?°C and 120 ?min. The highest biodiesel yield from Cassia auriculata oil was occurred with excess methanol that aids the equilibrium shift in the forward direction. The kinetics of the transesterification reaction was investigated under optimal conditions and the activation energy was found to be 14.91 ?kJ/mol. Simultaneously Gas Chromatography – Mass Spectroscopy was also carried out for the biodiesel produced from Cassia auriculata and the same has been reported. The GC analysis declares the existence of fatty acid esters like hexadecanoic acid methyl ester, methyl stearate and the peak with retention time 12.8 ?min signifies the evidence of hexadecanoic acid methyl ester with 28% of yield content. This investigation also evaluated the biodiesel quality produced from lipase-transesterified Cassia auriculata oil based on fuel properties. Biodiesel properties Flash Point (FC), Pour Point (PP) and kinematic viscosity were compared with American (ASTM 6751) and European (EN 14214) Standards. Cassia auriculata oil had PP 6.7 ?°C and Kinematic viscosity (813 ?kg/m³) that agreed with both the standards. Thus this study showed that Cassia auriculata oil could be a better fuel alternative with further improvement of fuel properties.     

A Novel Alkaliphilic Xylanase from the Newly Isolated Mesophilic Bacillus sp. MX47: Production, Purification, and Characterization

A newly isolated bacterial strain, Bacillus sp. MX47, was actively producing extracellular xylanase only in xylan-containing medium. The xylanase was purified from the culture broth by two chromatographic steps. The xylanase had an apparent molecular weight of 26.4?kDa with an NH₂-terminal sequence (Gln-Gly-Gly-Asn-Phe) distinct from that of reported proteins, implying it is a novel enzyme. The optimum pH and temperature for xylanase activity were 8.0 and 40?°C, respectively. The enzyme activity was severely inhibited by many divalent metal ions and EDTA at 5?mM. The xylanase was highly specific to beechwood and oat spelt xylan, however, not active on carboxymethyl cellulose (CMC), avicel, pectin, and starch. Analysis of the xylan hydrolysis products by Bacillus sp. MX47 xylanase indicated that it is an endo-??-1,4-xylanase. It hydrolyzed xylan to xylobiose as the end product. The K _m and V _max values toward beechwood xylan were 3.24?mg?ml^?1 and 58.21???mol?min^?1?mg^?1 protein, respectively.     

Kinetic and thermodynamic parameters of volatilization of biodiesel from babassu, palm oil and mineral diesel by thermogravimetric analysis (TG)

The boiling point and volatility are important properties for fuels, as it is for quality control of the industry of petroleum diesel and biofuels. In addition, through the volatility is possible to predict properties, such as vapor pressure, density, latent heat, heat of vaporization, viscosity, and surface tension of biodiesel. From thermogravimetry analysis it is possible to find the kinetic parameters (activation energy, pre-exponential factor, and reaction order), of thermally simulated processes, like volatilization. With the kinetic parameters, it is possible to obtain the thermodynamic parameters by mathematical formula. For the kinetic parameters, the minor values of activation energy were found for mineral diesel (E = 49.38 kJ mol^?1), followed by babassu biodiesel (E = 76.37 kJ mol^?1), and palm biodiesel (E = 87.00 kJ mol^?1). Between the two biofuels studied, the babassu biodiesel has the higher minor value of activation energy. The thermodynamics parameters of babassu biodiesel are, ΔS = ?129.12 J mol^?1 K^?1, ΔH = +80.38 kJ mol^?1 and ΔG = +142.74 kJ mol^?1. For palm biodiesel ΔS = ?119.26 J mol^?1 K^?1, ΔH = + 90.53 kJ mol^?1 and ΔG = +141.21 kJ mol^?1, and for diesel ΔS = ?131.3 J mol^?1 K^?1, ΔH = +53.29 kJ mol^?1 and ΔG = +115.13 kJ mol^?1. The kinetic thermal analysis shows that all E, ΔH, and ΔG values are positive and ΔS values are negative, consequently, all thermodynamic parameters indicate non-spontaneous processes of volatilization for all the fuels studied.     

Intrinsic Characteristics of Cr6+-Resistant Bacteria Isolated from an Electroplating Industry Polluted Soils for Plant Growth-Promoting Activities

The Cr⁶⁺-resistant plant growth-promoting bacteria was isolated from soil samples that were collected from an electroplating industry at Coimbatore, India, that had tolerated chromium concentrations up to 500?mg Cr⁶⁺/L in Luria-Bertani medium. Based on morphology, physiology, and biochemical characteristics, the strain was identified as Bacillus sp. following the Bergey's manual of determinative bacteriology. Evaluation of plant growth-promoting parameters has revealed the intrinsic ability of the strain for the production of indole-3-acetic acid (IAA), siderophore, and solubilization of insoluble phosphate. Bacillus sp. have utilized tryptophan as a precursor for their growth and produced IAA (122???g/mL). Bacillus sp. also exhibited the production of siderophore that was tested qualitatively using Chrome Azurol S (CAS) assay solution and utilized the insoluble tricalcium phosphate as the sole source of phosphate exhibiting higher rate of phosphate solubilization after 72?h of incubation (1.45???g/mL). Extent of Cr⁶⁺ uptake and accumulation of Cr⁶⁺ in the cell wall of Bacillus sp. was investigated using atomic absorption spectrophotometer and scanning electron microscope-energy dispersive spectroscopy, respectively. The congenital capability of this Cr⁶⁺-resistant plant growth-promoting Bacillus sp. could be employed as bacterial inoculum for the improvement of phytoremediation in heavy metal contaminated soils.     

Biotechnological Utilization of Biodiesel-Derived Glycerol for the Production of Ribonucleotides and Microbial Biomass

Ten yeast strains were evaluated concerning their capabilities to assimilate biodiesel-derived glycerol in batch cultivation. The influence of glycerol concentration, temperature, pH and yeast extract concentration on biomass production was studied for the yeast selected. Further, the effect of agitation on glycerol utilization by the yeast Hansenula anomala was also studied. The yeast H. anomala CCT 2648 showed the highest biomass yield (0.30?g?g^?1) and productivity (0.19?g?L^?1?h^?1). Citric acid, succinic acid, acetic acid and ethanol were found as the main metabolites produced. The increase of yeast extract concentration from 1 to 3?g?L^?1 resulted in high biomass production. The highest biomass concentration (21?g?L^?1), yield (0.45?g?g^?1) and productivity (0.31?g?L^?1?h^?1), as well as ribonucleotide production (13.13?mg?g^?1), were observed at 700?rpm and 0.5?vvm. These results demonstrated that glycerol from biodiesel production process showed to be a feasible substrate for producing biomass and ribonucleotides by yeast species.     

Reactive Extraction of Citric Acid Using Tri-n-octylamine in Nontoxic Natural Diluents: Part 1—Equilibrium Studies from Aqueous Solutions

Use of cheap, nontoxic, and selective solvents could economically provide a solution to the recovery of carboxylic acids produced by the bioroute. In this regard in the present paper, reactive extraction of citric acid was studied. Problems encompassing the recovery of the acid ([H₃A] _aq ^o ?=?0.1?C0.8) was solved by using tertiary amine (tri-n-octylamine, TOA) in natural diluents (rice bran oil, sunflower oil, soybean oil, and sesame oil). TOA was very effective in removal of acid providing distribution coefficient (D) as high as 18.51 (E%?=?95?%), 12.82 (E%?=?93?%), 15.09 (E%?=?94?%), and 16.28 (E%?=?94?%) when used with rice bran oil, sunflower oil, soybean oil, and sesame oil, respectively. Overall extraction constants and association numbers for TOA + rice bran oil, TOA + sunflower oil, TOA + soybean oil, and TOA + sesame oil were evaluated to be 35.48 (mol/l)^?1.46, 29.79 (mol/l)^?1.30, 33.79 (mol/l)^?1.51, and 37.64 (mol/l)^?1.65 and 1.46, 1.30, 1.51, and 1.65, respectively. Specific equilibrium complexation constants (K _E(n/m)) were also predicted using mathematical modeling.     

Isolation of Novel Microalgae from Acid Mine Drainage and Its Potential Application for Biodiesel Production

Microalgae were selected and isolated from acid mine drainage in order to find microalgae species which could be cultivated in low pH condition. In the present investigation, 30 microalgae were isolated from ten locations of acid mine drainage in South Korea. Four microalgae were selected based on their growth rate, morphology, and identified as strains of KGE1, KGE3, KGE4, and KGE7. The dry biomass of microalgae species ranged between 1 and 2 g L^?1 after 21 days of cultivation. The growth kinetics of microalgae was well described by logistic growth model. Among these, KGE7 has the highest biomass production (2.05?±?0.35 g L^?1), lipid productivity (0.82?±?0.14 g L^?1), and C16–C18 fatty acid contents (97.6 %). These results suggest that Scenedesmus sp. KGE 7 can be utilized for biodiesel production based on its high biomass and lipid productivity.     

Direct electrochemical behavior of cytochrome c, and its determination on phytic acid modified electrode

Phytic acid (PA) with its unique structure was attached to a glassy carbon electrode (GCE) to form PA/GCE modified electrode which was characterized by electrochemical impedance. The electrochemical behavior of cytochrome c (Cyt c) on the PA/GCE modified electrode was explored by cyclic voltammetry and differential pulse voltammetry. The Cyt c displayed a quasi-reversible redox process on PA modified electrode pH 7.0 phosphate buffer solution with a formal potential (E ^0′) of 57 mV (versus Ag/AgCl). The peak currents were linearly related to the square root of the scan rate in the range of 20–120 mV·s^?1. The electron transfer rate constant was determined to be 12.5 s^?1. The PA/GCE modified electrode was applied to the determination of Cyt c, in the range of 5?×?10^?6 to 3?×?10^?4 M, the currents increase linearly to the Cyt c concentration with a correlation coefficient 0.9981. The detection limit was 1?×?10^?6 M (signal/noise?=?3).     

Kinetics of thermal decomposition of natrium oxalato-oxo-diperoxo molibdate

Synthesis, characterizations, and thermal behavior of Na₂[MoO(O₂)₂(C₂O₄)] was studied. The thermally induced events will be observed by comparing the FT-IR spectra of the initial compound and of the char at 300 and 500?°C. The TG data were obtained at different heating rates: ???=?2.5, 4, 5, and 10?°C?min^?1 in air and nitrogen (50?mL?min^?1), and the TG/DTG data were processed with the following methods: Friedman, Flynn?CWall?COzawa, and modified NPK method.     

Chemical composition,antioxidant and antimicrobial potential of essential oils from different parts of <Emphasis Type="Italic">Daphne mucronata</Emphasis> Royle

This research work was executed to determine chemical composition, anti-oxidant and anti-microbial potential of the essential oils extracted from the leaves and stem of Daphne mucronata Royle. From leaves and stem oils fifty-one different constituents were identified through GC/MS examination. The antioxidant potential evaluated through DPPH free radical scavenging activity and %-inhibition of peroxidation in linoleic acid system. The stem’s essential oil showed the good antioxidant activity as compared to leaves essential oil. Results of Antimicrobial activity revealed that both stem and leaves oils showed strong activity against Candida albicans with large inhibition zone (22.2?±?0.01, 18.9?±?0.20 mm) and lowest MIC values (0.98?±?0.005, 2.44?±?0.002 mg/mL) respectively. Leaves essential was also active against Escherichia coli with inhibition zone of 8.88?±?0.01 mm and MIC values of 11.2?±?0.40 mg/mL. These results suggested that the plant’s essential oils would be a potential cradle for the natural product based antimicrobial as well as antioxidant agents.

Open image in new window

     

Elimination of Acetate Production to Improve Ethanol Yield During Continuous Synthesis Gas Fermentation by Engineered Biocatalyst Clostridium sp. MTEtOH550

Acetogen strain Clostridum sp. MT653 produced acetate 273?mM (p?<?0.005) and ethanol 250?mM (p?<?0.005) from synthesis gas blend mixture of 64?% CO and 36?%?H₂. Clostridum sp. MT653 was metabolically engineered to the biocatalyst strain Clostridium sp. MTEtOH550. The biocatalyst increased ethanol yield to 590?mM with no acetate production during single-stage continuous syngas fermentation due to expression of synthetic adh cloned in a multi-copy number expression vector. The acetate production was eliminated by inactivation of the pta gene in Clostridium sp. MTEtOH550. Gene introduction and gene elimination were achieved only using Syngas Biofuels Energy, Inc. electroporation generator. The electrotransformation efficiencies were 8.0?±?0.2?×?10⁶ per microgram of transforming DNA of the expression vector at cell viability ~15?%. The frequency of suicidal vector integration to inactivate pta was ~10^?5 per the number of recipient cells. This is the first report on elimination of acetate production and overexpression of synthetic adh gene to engineer acetogen biocatalyst for selective biofuel ethanol production during continuous syngas fermentation.     

Electrochemical Determination of the KRAS Genetic Marker for Colon Cancer with Modified Graphete and Graphene Paste Electrodes

The determination of KRAS was performed using electrochemical sensing devices based on graphite and graphene pastes, modified with a phthalocyanine-boron dipyrromethene (BODIPY) and azulenes dyes. The limits of quantification for KRAS were 1.54?×?10^?4?µg/mL using the sensor based on the phthalocyanine-BODIPY dye and graphite, 2.64?×?10^?7?µg/mL using the sensor based on 2,6-bis((E)-2-(furan-2-yl)vinyl)-4-(4,6,8-trimethylazulen-1-yl)pyridine/TiO₂Pt/reduced graphene oxide, and 3.84?×?10^?3?µg/mL using the sensor based on 2,6-bis((E)-2-(thiophen-3-yl)vinyl)-4-(4,6,8-trimethylazulen-1-yl)pyridine/TiO₂Pt/reduced graphene oxide. Recovery measurements demonstrated the suitable analytical performance of these sensors for the early detection of colon cancer by the analysis of whole blood samples.     

Solid phase extraction of trace amounts of Pb(II) in opium, heroin, lipstick, plants and water samples using modified magnetite nanoparticles prior to its atomic absorption determination

A new, simple, fast and reliable solid-phase extraction method has been developed for separation/preconcentration of trace amounts of Pb(II) using dithizone/sodium dodecyl sulfate-immobilized on alumina-coated magnetite nanoparticles, and its determination by flame atomic absorption spectrometry (FAAS) and graphite furnace atomic absorption spectrometry (GFAAS) after eluting with 4.0?mol?L^?1 HNO₃. Optimal experimental conditions including pH, sample volume, eluent concentration and volume, and co-existing ions have been studied and established. Under the optimal experimental conditions, the preconcentration factor, detection limit, linear range and relative standard deviation of Pb(II) using FAAS technique were 280 (for 560?mL of sample solution), 0.28?ng?mL^?1, 1.4?C70?ng?mL^?1 and 4.6% (for 10?ng?mL^?1, n?=?10), respectively. These analytical parameters using GFAAS technique were 300 (for 600?mL of sample solution), 0.002?ng?mL^?1, 0.006?C13.2?ng?mL^?1 and 3.1% (for 5?ng?mL^?1, n?=?10), respectively. The presented procedure was successfully applied for determination of Pb(II) content in opium, heroin, lipstick, plants and water samples.     

Fatty Acid Content and Profile of the Aerial Microalga Coccomyxa sp. Isolated from Dry Environments

Aerial algae are considered to be highly tolerant of and adaptable to severe conditions including radiation, desiccation, high temperatures, and nutrient deficiency, compared with those from aquatic habitats. There are considerable variations in the fatty acid (FA) composition of aerial microalgae from dry environments. A new species with a high lipid level was found on concrete surfaces and was identified as Coccomyxa sp. KGU-D001 (Trebouxiophyceae). This study characterized its FA content and profile in a bath culture. The alga showed a constant specific growth rate (0.26 day^?1) ranging in light intensity from 20 to 80 μmol photons m^?2 s^?1. The algal cells started to form oil bodies in the early stationary phase of growth, and oil bodies occupied most of the cells during the late stationary phase when the cells accumulated 27 % total fatty acids (TFA). The process of lipid body formation accumulating large amounts of triacylglycerols (TAG) appeared to be very unusual in response to stress conditions persisting for a relatively long culture time (50 days). This study could indicate that aerial microalgae will be a candidate for biodiesel production when a new cultivation method is developed using extreme stresses such as nutritional deficiency and/or desiccation.