Magnesium chloride supported high mileage catalysts for olefin polymerization. XII. Polymerization of ethylene

Polymerizations of ethylene by the MgCl₂/ethylbenzoate/p-cresol/AlEt₃ TiCl₄-AlEt₃/methyl-p-toluate (CW-catalyst) have been studied. The initially formed active site concentration, [Ti] has a maximum value of 50% of total titanium at 50°C and lower values at other temperatures. The Ti decays rapidly to Ti sites with conc. ca. 10 mol %/mol Ti. The rate constants for four chain transfer processes have been obtained at 50°C: for transfer with AlEt₃, k = 2.1 × 10^?4 s^?1 and k = 4.8 × 10^?4 s^?1; for transfer with monomer, k = 3.6 × 10^?3 (M s)^?1 and K = 8.3 × 10^?3 (M s)^?1; for β-hydride transfer, k = 7.2 × 10^?4 s^?1 and k = 4.9 × 10^?4 s^?1; and transfer with hydrogen, k = 4.0 × 10^?3 torr^1/2 s^? and k = 5.1 × 10^?3 torr^1/2 s^?1. The rate constants for the termination assisted by hydrogen is k = 1.7 (M^1/2 torr^1/2 S)^?1. If monomer is assisting termination as was observed for propylene polymerization, then k = 7.8 (M^3/2 s)^?1. Values of all the rate constants can be higher or lower at other temperatures. Detailed comparisons were made with the results of propylene polymerizations. There are more than four times as many Ti active sites for ethylene polymerization than there are for stereospecific polymerization of propylene; the difference is more than a factor of two for the Ti sites. Certain rate constants are nearly the same for both monomers while others are markedly different. Some of the differences can be explained by stereoelectronic effects.     

Sulfoximid und Sulfoximidium-Salze – Strukturen und H?Brückenbindungen

Sulfoximide and Sulfoximidium Salts – Structures and Hydrogen Bonding In the solid state dimethylsulfoximide ( 1 ) (orthorhombic; space group Pbca; a = 577.8, b = 931.2 and c = 1645.6 pm) makes intermolecular N? H ? N hydrogen bonds. The hydrogen halide salts (CH₃)₂S(O)NH₂⁺Hal^? (( 2 ), Hal^??Cl^?; ( 4 ), Hal^??Br^?) reacts with metal halides to yield (CH₃)₂S(O)NH₂⁺MHal with the complex anions (( 5 ), MHal?SbCl₄^?; ( 6 ), MHal?SbCl₅^2?; ( 7 ), MHal?SbCl₆^?; ( 8 ), MHal?SbBr₅^2?; ( 9 ), MHal?AlCl₄^?). 2 crystallizes from ethanol (96%) as [(CH₃)₂S(O)NH₂⁺Cl^?]₂ · H₂O ( 3 ). The structures of 3 (monoclinic; space group P2₁/c; a = 917.0, b = 1344.7, c = 1080.8 pm and β = 103.8°; Z = 10), 4 (orthorhombic; space group Pbcn; a = 1028.9, b = 1132.6, c = 1074.1 pm; Z = 8) and 6 (monoclinic; space group C2/c; a = 2041.1, b = 1101.4, c = 3365.6 pm and β = 153.8°; Z = 8) are determined by X-ray analysis. In 6 Sb is coordinated in a distorted octahedra by 6 Cl in three short (mean 245,5 pm; SbCl₃) and three long distances (291 to 299 pm; Cl^?). Two of the chloride ions connect the Sb atoms to infinite Sb …? Cl …? Sb chains. Except for 7 and 9 there are bridges between the NH₂ groups and the halide ions. The NH valence vibrations are discussed in view of hydrogen bonding.     

Variable-Temperature and Variable-Pressure Kinetic and Equilibrium studies of formation and dissociation of [V(H2O)5NCS]2+

The kinetics of formation and dissociation of [V(H₂O)₅NCS]²⁺ have been studied, as a function of excess metal-ion concentration, temperature, and pressure, by the stopped-flow technique. The thermodynamic stability of the complex was also determined spectrophotometrically. The kinetic and equilibrium data were submitted to a combined analysis. The rate constants and activation parameters for the formation (f) and dissociation (r) of the complex are: k/M ^?1 · S^?1 = 126.4, k/s^?1 = 0.82; ΔH /kJ · mol^?1 = 49.1, ΔH/kJ · mol^?1 = 60.6; ΔS/ J·K^?1·mol^?1= ?39.8, ΔSJ·K^?1·mol^?1 = ?43.4; ΔV/cm³·mol^?1 = ?9.4, and ΔV/cm³ · mol^?1 =?17.9. The equilibrium constant for the formation of the monoisothiocynato complex is K²⁹⁸/M ^?1 = 152.9, and the enthalpy and entropy of reaction are ΔH⁰/kJ · mol^?1 = ? 11.4 and ΔS⁰/J. K^?1mol^?1 = +3.6. The reaction volume is ΔV⁰/cm³· mol^?1 = +8.5. The activation parameters for the complex-formation step are similar to those for the water exchange on [V(H₂O)₆]³⁺ obtained previously by NMR techniques. The activation volumes for the two processes are consistent with an associative interchange, I_a, mechanism.     

Temperature and pressure effects on the kinetics of the Bromate ion-iodide ion-L-ascorbic acid clock reaction

The kinetics of the bromate ion-iodide ion-L-ascorbic acid clock reaction was investigated as a function of temperature and pressure using stopped-flow techniques. Kinetic results were obtained for the uncatalyzed as well as for the Mo(VI) and V(V) catalyzed reactions. While molybdenum catalyzes the BrO-I^? reaction, vanadium catalyzes the direct oxidation of ascorbic acid by bromate ion. The corresponding rate laws and kinetic parameters are as follows. Uncatalyzed reaction: r₂ = k₂[BrO] [I^?][H⁺]², k₂ = 38.6 ± 2.0 dm⁹ mol^?3 s^?1, ΔH? = 41.3 ± 4.2 kJmol^?1, ΔS? = ?75.9 ± 11.4 Jmol^?1 K^?1, ΔV? = ?14.2 ± 2.9 cm³ mol^?1. Molybdenum-catalyzed reaction: r′₂ = k₂[BrO] [I^?] [H⁺]² + k_Mo[BrO] [I^?] [ H⁺]²[M₀(VI)], k_Mo = (2.9 ± 0.3)10⁶ dm¹² mol^?4 s^?1, ΔH? = 27.2 ± 2.5 kJmol^?1, ΔS? = ?30.1 ± 4.5 Jmol^?1K^?1, ΔV? = 14.2 ± 2.1 cm³ mol^?1. Vanadium-catalyzed reaction: r′₁ = k_V[BrO] [V(V)], k_V = 9.1 ± 0.6 dm³ mol^?1 s^?1, ΔH? = 61.4 ± 5.4 kJmol^?1, ΔS? = ?20.7 ± 3.1 Jmol^?1K^?1, ΔV? = 5.2 ± 1.5 cm³ mol^?1. On the basis of the results, mechanistic details of the BrO-I^? reaction and the catalytic oxidation of ascorbic acid by BrO are elaborated. © 1995 John Wiley & Sons, Inc.     

Kinetics and mechanism of the reaction of CH3O with NO

The kinetics of the reaction of CH₃O with NO and the branching ratio for HCHO product formation, obtained as Γ_HCHO = (Rate of HCHO formation) / (Rate of CH₃O decay), have been studied using a discharge flow reactor. Laser induced fluorescence has been used to monitor the decay of the CH₃O radical and the build-up of the HCHO product. Overall rate constants and product branching ratios were measured at room temperature over the pressure range of 0.72–8.5 torr He. Three reaction mechanisms were considered which differed in the routes of HCHO formation: (i) direct disproportionation; (ii) via an energized collision complex; or (iii) both reaction routes. It has been shown that data on the pressure dependence of the overall rate constant are not sufficient to distinguish between these mechanisms. In addition, an accurate value of Γ is required. Analysis of the available experimental data provided 0.0 and about 0.1 as the lower and upper limit for Γ, respectively. Since the rate constants derived for CH₃ONO formation were not sensitive to the value assumed for Γ, k = (1.69 ± 0.69) × 10^?29 cm⁶ molecule^?2 s^?1 and k = (2.45 ± 0.31) × 10^?11 cm³ molecule^?1 s^?1 could be derived. The rate constant obtained for formaldehyde formation when extrapolated to zero pressure is k = (3.15 ± 0.92) × 10^?12 cm³ molecule^?1 s^?1. © 1994 John Wiley & Sons, Inc.     

Kinetic study of the interaction of adenosine 5′‐monophosphate with diaqua (2‐hydrazinopyridine) palladium(II) in aqueous medium

The interaction of the palladium(II) complex [Pd(hzpy)(H₂O)₂]²⁺, where hzpy is 2‐hydrazinopyridine, with purine nucleoside adenosine 5′‐monophosphate (5′‐AMP) was studied kinetically under pseudo‐first‐order conditions, using stopped‐flow techniques. The reaction was found to take place in two consecutive reaction steps, which are both dependent on the actual 5′‐AMP concentration. The activation parameters for the two reaction steps, i.e. ΔH = 32 ±2 kJ mol^?1, ΔS = ?168 ±7 J K^?1 mol^?1, and ΔH = 28 ± 1 kJ mol^?1, ΔS = ?126 ± 5 J K^?1 mol^?1, respectively, were evaluated and suggested an associative mode of activation for both substitution processes. The stability constants and the associated speciation diagram of the complexes were also determined potentiometrically. The isolated solid complex was characterized by C, H, and N elemental analyses, IR, magnetic, and molar conductance measurements. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 42: 132–142, 2010     

Kinetics of the thermal unimolecular decomposition of hex-1-ene-3-yne. Heat of formation and resonance stabilization energy of the 3-ethenylpropargyl radical

The thermal unimolecular decomposition of hex-1-ene-3-yne (HEY) has been investigated over the temperature range 949–1230 K using the technique of very low-pressure pyrolysis (VLPP). One reaction pathway is the expected C₅? C₆ bond fission to form the resonance-stabilized 3-ethenylpropargyl radical. There is a concurrent process producing molecular hydrogen which probably occurs via the intermediate formation of hexatrienes and cyclohexa-1,3-diene. RRKM calculations yield the extrapolated high-pressure rate parameters at 1100 K given by the expressions 10^16.0±0.3 exp(?300.4 ± 12.6 kJ mol^?1/RT) s^?1 for bond fission and 10^13.2+0.4 exp(?247.7 ± 8.4 kJ mol^?1/RT) for the overall formation of hydrogen. The A factors were assigned from the results of previous studies of related alkynes, alkenes, and alkadienes. The activation energy for the bond fission reaction leads to ΔH [H₂CCHCC?H₂] = 391.9, DH [H₂CCHCCCH₂? H] = 363.3, and a resonance stabilization energy of 56.9 ± 14.0 kJ mol^?1 for the 3-ethenylpropargyl radical, based on a value of 420.2 kJ mol^?1 for the primary C? H bond dissociation energy in alkanes. Comparison with the revised value of 46.6 kJ mol^?1 for the resonance energy of the unsubstituted propargyl radical indicates that the ethenyl substituent (CH₂?CH) on the terminal carbon atom has only a small effect on the propargyl resonance energy. © John Wiley & Sons, Inc.     

Arrhenius parameters for the gas‐phase reactions of O3 with two butenes and two methyl‐substituted butenes over the temperature range of 295–351 K

Gas‐phase reactions of ozone with two butenes (1‐butene and isobutene) and two methyl‐substituted butenes (2‐methyl‐1‐butene and 3‐methyl‐1‐butene) have been studied in an indoor chamber at 295–351 K. The O₃ concentrations were monitored by Model 49C‐Ozone analyzer. The butene concentrations were measured by gas chromatography–flame ionization detector. The Arrhenius expressions of k=3.50×10^?15e^{(?1756±84)/T} cm³ molecule^?1 s^?1, k=3.39×10^?15e^{(?1697±52)/T} cm³ molecule^?1 s^?1, k=6.18×10^?15e^{?(1822±80)/T} cm³ molecule^?1 s^?1, and k=7.24×10^?14e^{?(2741±139)/T} cm³ molecule^?1 s^?1 were obtained for the ozonolysis reactions of 1‐butene, isobutene, 2‐methyl‐1‐butene, and 3‐methyl‐1‐butene, respectively. Both the reaction rate constant and activation energy obtained in this work are in good agreement with those reported by using different techniques in the literature. © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 238–246, 2011     

Theoretical studies of diamagnetic properties of the hydrogen molecule ion. I. Approximate variation-perturbation calculation

A variation-perturbation method, analogous to a technique devised by Das and Bersohn for the study of the hydrogen molecule, is developed for calculation of the diamagnetic susceptibility χ and magnetic shielding σ and is applied to a study of the hydrogen molecule ion. Two approximations are investigated–in a first approximation, χ = ?0.37814α²a and σ = 1.112 × 10^?5 c.g.s. units and in a second approximation, χ = ?0.37569α²a and σ = 1.128 × 10^?5 c.g.s. units.     

EPR-Einkristalluntersuchungen System Fe(NO)(Et2dsc)2/In(Et2dsc)3 (Et2dsc = Diethyldiselenocarbamat). Kristall- und Molekülstruktur von Tris(diethyldiselenocarbamato)indium(III), In(Et2dsc)3

Single Crystal Electron Paramagnetic Resonance Study on the System Fe(NO)(Et₂dsc)₂/In(Et₂dsc)₃ (Et₂dsc = diethyldiselenocarbamate). Crystal and Molecular Structure of Tris(diethyldiselenocarbamato)indium(III), In^III(Et₂dsc)₃ A single-crystal EPR study (T = 295 K) of Bis(diethyldiselenocarbamato)nitrosyliron(I) incorporated in Tris(diethyldiselenocarbamato)indium(III) is reported. The tensors g an A^N have rhombic symmetry with g₁ = 2.048, g₂ = 2.058, g₃ = 2.062 and A = 9.2 · 10^?4 cm^?1, A = 10.0 · 10^?4 cm^?1, A = 11.3 · 10^?4 cm^?1. The A values are discussed in terms of spin density distribution. The x-ray crystallographic data of In^III(Et₂dsc)₃ (space group P2₁/c, a = 6.731(3) Å, b = 18.05(9) Å, c = 20.914(10) Å, α = 90.02(2)°, β = 93.74(2)° and γ = 90.01(2)°) are given.     

Anionic polymerization of N-substituted maleimide. V. A study on the kinetic features of anionic polymerization of N-phenylmaleimide

The kinetic feature of the anionic polymerization of N-PMI was investigated in THF. The polymerization system initiated with lithium tert-butoxide was revealed to be so-called “slow-initiation” system. The rate constant of the initiation reaction, k_i, was obtained to be 4.2 × 10^?3 (L mol^?1 s^?1) at ?72°C. The apparent rate constants of the propagation reaction, k, at ?72°C were individually obtained from each slope of the first-order plots in the later stages of the polymerizations for four different initiator concentrations. Each k is fairly close to that of initiation rate around 10^?3. The propagation reaction was concluded to be dominated by ion-pair mechanism from the analysis of the kinetic data and the results of the addition effects of crown ether and common salt.     

Dicyanmethanido- und Cyanamido-oxoanionen. Untersuchungen zum sauerstoffanalogen Charakter der C(CN)2- und NCN-Gruppen

The equivalence of the C(CN)₂- and the NCN-groups with oxygen in the series of homologous ions C(CN), N(CN), OCN^? and NOC(CN), NO causes us to postulate a more general value of this relation. Arguments for the formulation of a pseudochalkogen series C(CN)₂? NCN? O are discussed. Synthesis, structure and reactivity of some dicyanmethanido- and cyanamido-oxoanions RCOY^?, CO₂Y^2?, COY, NOY^?, NO₂Y^?, PO₃Y^3?, PO₂Y and SO₂Y^2? are described. (Y ? C(CN)₂, NCN.) The preparation of some triorganoleadacyles is reported.     

Rate constants for some reactions of free radicals with haloacetates in aqueous solution

The kinetics of the acqueous-phase reactions of the free radicals ·OH, ·Cl, and SO· with the halogenated acetates, CH₂FCOO^?, CHF₂COO^?, CF₃COO^?, and with CH₂ClCOO^?, CHCl₂COO^?, CCl₃COO^? were investigated. Generally, the reactivity decreases with increasing halogen substitution and is in the order k(·OH) > k(SO·) > k(·Cl), but there is no general relation between the effect on reactivity of chlorine and fluorine substitution. © 1995 John Wiley & Sons, Inc.     

Inorganic reactions of iodine(III) in acidic solutions and free energy of iodous acid formation

An analysis of the former works devoted to the reactions of I(III) in acidic nonbuffered solutions gives new thermodynamic and kinetic information. At low iodide concentrations, the rate law of the reaction IO + I^? + 2H⁺ ? IO₂H + IOH is k_+B [IO][I^?][H⁺]² – k_?B [IO₂H][IOH] with k_+B = 4.5 × 10³ M^?3s^?1 and k_?B = 240 M^?1s^?1 at 25°C and zero ionic strength. The rate law of the reaction IO₂H + I^? + H⁺ ? 2IOH is k_+C [IO₂H][I^?][H⁺] – k_?C [IOH]² with k_+C = 1.9 × 10¹⁰ M^?2s^?1 and k_?C = 25 M^?1s^?1. These values lead to a Gibbs free energy of IO₂H formation of ?95 kJ mol^?1. The pK_a of iodous acid should be about 6, leading to a Gibbs free energy of IO formation of about ?61 kJ mol^?1. Estimations of the four rate constants at 50°C give, respectively, 1.2 × 10⁴ M^?3s^?1, 590 M^?1s^?1, 2 × 10⁹ M^?2s^?1, and 20 M^?1 s^?1. Mechanisms of these reactions involving the protonation IO₂H + H⁺ ? IO₂H and an explanation of the decrease of the last two rate constants when the temperature increases, are proposed. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 647–652, 2008     

Peculiar kinetics of the complex formation in the iron(III)–sulfate system

The results of comprehensive equilibrium and kinetic studies of the iron(III)–sulfate system in aqueous solutions at I = 1.0 M (NaClO₄), in the concentration ranges of T = 0.15–0.3 mM, and at pH 0.7–2.5 are presented. The iron(III)–containing species detected are FeOH²⁺ (=FeH_?1), (FeOH) (=Fe₂H_?2), FeSO, and Fe(SO₄) with formation constants of log β = ?2.84, log β = ?2.88, log β = 2.32, and log β = 3.83. The formation rate constants of the stepwise formation of the sulfate complexes are k_1a = 4.4 × 10³ M^?1 s^?1 for the ${\rm Fe}^{3+} + {\rm SO}_4^{2-}\,\stackrel{k_{1a}}{\rightleftharpoons}\, {\rm FeSO}_4^+The results of comprehensive equilibrium and kinetic studies of the iron(III)–sulfate system in aqueous solutions at I = 1.0 M (NaClO₄), in the concentration ranges of T = 0.15–0.3 mM, and at pH 0.7–2.5 are presented. The iron(III)–containing species detected are FeOH²⁺ (=FeH_?1), (FeOH) (=Fe₂H_?2), FeSO, and Fe(SO₄) with formation constants of log β = ?2.84, log β = ?2.88, log β = 2.32, and log β = 3.83. The formation rate constants of the stepwise formation of the sulfate complexes are k_1a = 4.4 × 10³ M^?1 s^?1 for the ${\rm Fe}^{3+} + {\rm SO}_4^{2-}\,\stackrel{k_{1a}}{\rightleftharpoons}\, {\rm FeSO}_4^+$ step and k₂ = 1.1 × 10³ M^?1 s^?1 for the ${\rm FeSO}_4^+ + {\rm SO}_4^{2-} \stackrel{k_2}{\rightleftharpoons}\, {\rm Fe}({\rm SO}_4)_2^-$ step. The mono‐sulfate complex is also formed in the ${\rm Fe}({\rm OH})^{2+} + {\rm SO}_4^{2-} \stackrel{k_{1b}}{\longrightarrow} {\rm FeSO}_4^+$ reaction with the k_1b = 2.7 × 10⁵ M^?1 s^?1 rate constant. The most surprising result is, however, that the 2 FeSO? Fe³⁺ + Fe(SO₄) equilibrium is established well before the system as a whole reaches its equilibrium state, and the main path of the formation of Fe(SO₄) is the above fast (on the stopped flow scale) equilibrium process. The use and advantages of our recently elaborated programs for the evaluation of equilibrium and kinetic experiments are briefly outlined. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 114–124, 2008     

Magnesium chloride-supported high-mileage catalysts for olefin polymerization XI. Determinations of poly(decene-1) molecular weight chain dimension and thermal transitions

Decene-1 was polymerized with the CW catalyst and fractionated by precipitation technique. Light-scattering and viscometric measurements on these fractions established the relationship [η] = 5.19 × 10^?3 M . The unperturbed mean square end-to-end distance is (〈R〉/M)^1/2 = (6.17 ± 0.34) × 10^?9. Light-scattering data is consistent with a relatively stiff molecule with length of L = 1.75 × 10^?5 cm for poly(decene-1) with MW = 397,000. Its mean square radius of gyration 〈R〉 is 2.79 × 10^?11 cm.² The ratio of L²/〈R〉 = 11 is close to the theoretical ratio of 12 for this kind of macromolecule.     

Negative ion fragmentations of deprotonated peptides containing post‐translational modifications. An unusual cyclisation/rearrangement involving phosphotyrosine; a joint experimental and theoretical study

The characteristic fragmentations of a pTyr group in the negative ion electrospray mass spectrum of the [M–H]^? anion of a peptide or protein involve the formation of PO (m/z 79) and the corresponding [(M‐H)^?–HPO₃]^? species. In some tetrapeptides where pTyr is the third residue, these characteristic anion fragmentations are accompanied by ions corresponding to H₂PO and [(M‐H)^?–H₃PO₄]^? (these are fragmentations normally indicating the presence of pSer or pThr). These product ions are formed by rearrangement processes which involve initial nucleophilic attack of a C‐terminal ‐CO [or ‐C(?NH)O^?] group at the phosphorus of the Tyr side chain [an S_N2(P) reaction]. The rearrangement reactions have been studied by ab initio calculations at the HF/6‐31+G(d)//AM1 level of theory. The study suggests the possibility of two processes following the initial S_N2(P) reaction. In the rearrangement (involving a C‐terminal carboxylate anion) with the lower energy reaction profile, the formation of the H₂PO and [(M‐H)^?–H₃PO₄]^? anions is endothermic by 180 and 318 kJ mol^?1, respectively, with a maximum barrier (to a transition state) of 229 kJ mol^?1. The energy required to form H₂PO by this rearrangement process is (i) more than that necessary to effect the characteristic formation of PO from pTyr, but (ii) comparable with that required to effect the characteristic α, β and γ backbone cleavages of peptide negative ions. Copyright © 2009 John Wiley & Sons, Ltd.     

Stability of Complex Metal Bromides in the gas phase and in toluene

The equilibrium constants of the reactions MBr₂(s) + Al₂Br₆(sln) ? MAl₂Br₈(sln) M = Cr, Mn, Co, Ni, Zn, Cd have been measured at 298 K in toluene. Ni: 0.017 ± 0.0024, Co: 0.54 ± 0.07, Zn: 1.5 ± 0.2, Mn: 2.1 ± 0, 7, Cr: 2.2 ± 1, Cd: 7 ± 5. They are compared with literature values of the equilibrium constants of analogous reactions in the gas phase MX₂(s) + Al₂X₆(g) ? MAl₂X₈(g), X = Cl, Br. For CoAl₂Br₈(sln) the temperature dependence of the equilibrium constant yielded Δ_fH = ?9.4 ± 1 kJ mol^?1 and Δ_fS = ?39.5 ± 3 J mol^?1 K^?1 while literature values for CoAl₂Br₈(g) are Δ_fH = 42.4 ± 2 kJ mol^?1 and Δ_fS = 42.9 ± 2 J mol^?1 K^?1. The solubility of Al₂Br₆ in toluene as well as its enthalpy of dissolution have been measured in order to evaluate ΔH° and ΔS° of the solvation of Al₂Br₆(g) and CoAl₂Br₈(g) in toluene by a thermodynamic cycle. Solvation of Al₂Br₆(g): ΔH = ?72.7 ± 1 kJ mol^?1, ΔS = ?139.6 ± 4 J mol^?1 K^?1, solvation of CoAl₂Br₈(g): ΔH = ?124.5 ± 4kJ mol^?1, ΔS = ?222 ± 9J mol^?1 K^?1. Thus, CoAl₂Br₈ interacts more strongly with the solvent toluene than Al₂Br₆ does.     

Thermochemistry of the Ternary Complex Nd（Et2dtc）3（phen）

Introduction A series of lanthanide sulfide complexes have beenlargely used for ceramics and thin film materials1 andthese complexes could be prepared from the precursorswhich are the compounds containing lanthanide-sulfurbonds.2-4 For instance, the compounds synthesized with[(alkyl)2dtc]-, phen?H2O and lanthanide salts were usedas the volatile precursors for preparing lanthanide sul-fide, its friction properties in lubricant was investigatedin literature 5 and the preparation and propertie…     

Cuprous complexes and dioxygen. Part 11. Concomitant one- and two-electron reduction of O2 by the Cu ion

The autoxidation of Cu^I in aqueous MeCN has been studied using a Clark oxygen electrode in the presence and absence of Cu¹¹. The reaction is inhibited by Cu¹¹ in the pH range of 0.5 to 5.0, reaching a lower limiting value at the highest concentrations. The reaction order changes from 1 to 2 with respect to Cu^I under the influence of Cu²⁺ ion. Detailed kinetics analysis of a total of 275 measurements has shown that an unstable primary adduct CuO⁺₂ decomoses to give ^.O or HO, depnding on pH, and also reacts directly with a second Cu⁺ ion, avoiding one-electrton reduction of O₂ by this path. Reaction of HO is faster with Cu^I than with Cu¹¹ by a factor of 20, and single-electron transfer within CuO⁺₂ to Cu²⁺ and ^.O predominates over reaction with a second copper ion for [Cu^I_tot] < 2. 10^?3M in the absence of Cu²⁺. The most likely value for the reaction of ^.O with Cu^I is 5.3 · 10⁸ M ^?1S^?1, but even this high rate constant is at the limit of significance. All secondary reactions followinfg the initial formation of CuO⁺₂ are shown to be very fast, a fact that should be properly considered in the discussion of mechanisms of copper-catalyzed oxidations and oxygenations.