Variation of the pH of the background electrolyte due to electrode reactions in capillary electrophoresis: Theoretical approach and in situ measurement

Electrode reactions during the electrophoretic process may change the pH of the buffer and subsequently the migration behavior of solutes with resultant loss of reproducibility. A theoretical treatment of pH variations due to electrolytic processes is presented. The choice of buffer appears to have a dramatic influence on the pH variations observed, even if substantial buffer action is expected at the pH chosen. The experimental evaluation of the separation of 4-hydroxy-3-methoxycinnamic acid and 3-hydroxybenzoic acid reveals that the quality of the separation decreases continuously from a baseline separation observed in the first experiment to a comigration of the two solutes (resolution = 0) in the ninth experiment. A pH decrease of about 0.05 pH units accounts for the observed changes in mobility. A novel in situ pH measurement approach is presented, in which the mobility, peak area, and peak height of an indicator dye are related to the pH in the capillary. This enables the identification and quantification of pH variations during electrophoretic runs: the pH decreases at the anodic side already after the first experiment and pH variations as small as 0.02 pH units can be measured. The variations in peak height appear to be less suited. The calculated pH variations are in close agreement with the ones obtained experimentally.     

pH programming in capillary electrophoresis by means of temperature programming

When using a background electrolyte with a buffer having strong temperature dependence of pK, different operating temperatures result in different operating pH values, using the same background electrolyte (BGE). It has been shown that this can be used to fine-tune selectivities of sample mixtures of weak analytes. Capillary electrophoresis (CE) equipment is designed to operate under isothermal conditions, but by proper programming, a very reproducible temperature and thus BGE pH program during the analysis can be realized. This was experimentally verified and illustrated by computer simulations. Equipment characteristics have been determined, and possibilities and restrictions to make use of this feature are presented.     

Flavonoid separation by capillary electrophoresis. Effect of temperature and pH

Summary The use of capillary electrophoresis for the analysis of selected flavonols present in fruit juices and wines (kaempferol-3-rutinoside, rutin, avicularin, quercitrin, isoquercitrin, isorhamnetin, kaempferol and quercetin) was explored, and the effect of pH and temperature on the separation studied. The method had good reproducibility and analyses were carried out in less than 10 minutes.     

Flavonoid separation by capillary electrophoresis. Effect of temperature and pH

Summary The use of capillary electrophoresis for the analysis of selected flavonols present in fruit juices and wines (kaempferol-3- rutinoside, rutin, avicularin, quercitrin, isoquercitrin, isorhamnetin, kaempferol and quercetin) was explored, and the effect of pH and temperature on the separation studied. The method had good reproducibility and analyses were carried out in less than 10 minutes.     

毛细管电泳分离几种神经递质的研究

研究了不同毛细管预处理方法对组胺、5-羟色胺及儿茶酚胺类神经递质电泳分离的影响，采用优化的毛细管预处理方法及电泳分离条件基线分离了组胺、5-羟色胺、去甲肾上腺素和肾上腺素。利用多巴胺和5-羟色胺在毛细管内壁吸附效应的不同，对电泳淌度极为相近的多巴胺和5-羟色胺进行了分离和鉴定。以PC22细胞为研究对象，证实了该细胞中所含大量神经递质是多巴胺，不是5-羟色胺。     

Rapid optimized separation of bromide in serum samples with capillary zone electrophoresis by using glycerol as additive to the background electrolyte

After decades of neglect, bromide has recently been re-introduced in therapy as an effective anti-epileptic drug. The present paper describes the methodological optimization and validation of a method based on capillary zone electrophoresis for the rapid determination of bromide in serum using a high-viscosity buffer and a short capillary (10 cm). The optimized running buffer was composed of 90 mM sodium tetraborate, 10 mM sodium chloride, pH 9.24 and 25% glycerol. The separation was carried out at 25 kV at a temperature of 20 °C. Detection was by direct UV absorption at 200 nm wavelength. The limit of detection (signal-to-noise ratio = 5) in serum was 0.017 mM. The precision of the method was verified in blank serum samples spiked with bromide, obtaining intra-day and day-to-day tests, relative standard deviation values ≤0.2% in terms of migration times and values <2% in terms of peaks areas, respectively.     

Piperazine quaternary diammonium salts as additives to background electrolytes in capillary zone electrophoresis

The differential behavior of five different quaternary mono- and diammonium salts, among the 18 investigated, in modulating the electroendoosmotic flow (EOF) and analyte separations in capillary zone electrophoresis is evaluated. It is found that quaternary diammonium salts with positive charges separated by more than four carbon atoms, while exhibiting a very strong affinity for chromatographic silica beads, to the point of exhibiting Rf values close to zero, display, on the contrary, a very poor affinity for the silica wall of capillaries. Compounds separated only by a C2 unit (i.e., 1,4-dialkyl-1,4-diazoniabicyclo[2,2,2,]octane, salts 17 and 18) show high Rf values due to strong ion pair association. The unique behavior of quaternary monoammonium salts possessing an iodinated alkyl (butyl or octyl) tail (i.e., 1, 6, and 7) is attributed to their ability to be covalently affixed to the silica wall via alkylation of ionized silanols at alkaline pH values. They thus strongly modulate and typically invert the EOF, even when not present in the background electrolyte. On the contrary, all diammonium salts, devoid of such alkyl tails, are unable to modulate the EOF and to prevent analyte binding to the silica wall, since they are rapidly removed from the wall by the voltage gradient. However, if added in small amount to the background electrolyte, they offer excellent separations of mixtures of very similar organic acids and prevent any interaction with the capillary wall.     

A technique for capillary joining in capillary electrophoresis

Summary Aspects of cracking and joining capillaries have been investigated. Capillary coupling was achieved using various methods. The most successful used hydrofluoric acid-etched capillaries to form male and female ends which were then joined together. This type of joint was used to connect sections of capillary of similar and different internal diameters with minimal loss in resolution, peak width and number of theoretical plates. (Uridine and hypoxanthine was used as a test mixture). For hypoxanthine on a 50 m/50 m etched joined capillary 10 cm from the detector window the number of theoretical plates was 96.6% of that for hypoxanthine on an unbroken capillary. Following the relative success of capillary joining, a coupled capillary flowcell (50 m/200 m) was produced and evaluated.     

Carbon nanotubes as separation carrier in capillary electrophoresis

The utility and versatility of carboxylic single-walled carbon nanotubes (c-SWNT) in capillary electrophoresis (CE) is demonstrated, using as model solutes homologues and structural isomers. In the case of homologues of caffeine and theobromine, distinct changes in the electrophoretic parameters occur at a critical concentration of c-SWNT in the run buffer. It is suggested that the c-SWNT of a definite concentration could form a network in the run buffer as a pseudostationary phase on the basis of the unique tubule structure, providing a different separation from sodium dodecyl sulfate (SDS) micelles. In the case of structural isomers of catechol and hydroquinone, differing from the homologues, it is mainly attributable to the functional groups on the c-SWNT that have an effect on the electrophoretic behaviors by forming intermolecular hydrogen bonding with analytes. Furthermore, aggregated c-SWNT serve as anticonvective media and minimize solute diffusion contributing to zone broadening. The presence of charged c-SWNT suppressed the electrodiffusion and decreased the adsorption between capillary wall and solutes, which led to better peak shapes of isomers.     

Large volume sample stacking in capillary electrophoresis of weakly acidic compounds using coated capillaries at high pH

Large volume stacking using the electroosmotic flow (EOF) pump (LVSEP) in capillary electrophoresis under a reverse potential is a convenient and straightforward approach for on-line concentration of dilute anionic sample solutions. LVSEP achieves automatic sample matrix removal and subsequent separation without intermediate polarity switching nor complicated instrumental setup. Since anionic analytes should move against the EOF in LVSEP, EOF needs to be suppressed. We extended the range of LVSEP up to pH 11 using various EOF suppression methods, such as dynamic coating by polymer pretreatment and permanent coating. Weakly acidic organic compounds (pK_a<5.2), chlorinated phenols (pK_a=7-9), and aromatic amino acids (pK_a2∼9.3) were concentrated and separated. By hydrodynamically filling the whole capillary of 27 cm long with the sample solution, fast and reliable injection was achieved and sensitivity enhancement factors as large as 170 were readily obtained in less than 8 min.     

Azithromycin as a new chiral selector in capillary electrophoresis

In capillary electrophoresis (CE), separation of enantiomers of a chiral compound can be achieved through the chiral interactions and/or complex formation between the chiral selector and the enantiomeric analytes on leaving their diastereomeric forms with different stability constants and hence different mobilities. A great number of chiral selectors have been employed in CE and among them macrocyclic antibiotics exhibited excellent enantioselective properties towards a wide number of racemic compounds. The use of azithromycin (AZM) as a chiral selector has not been reported previously. This work reports the use of AZM as a chiral selector for the enantiomeric separations of five chiral drugs and one amino acid (tryptophan) in CE. The enantioseparation is carried out using polar organic mixtures of acetonitrile (ACN), methanol (MeOH), acetic acid and triethylamine as run buffer. The influences of the chiral selector concentration, ACN/MeOH ratio, applied voltage and capillary temperature on enantioseparation are investigated. The results show that AZM is a viable chiral selector in CE for the enantioseparation of the type of chiral drugs investigated.     

Application of 1-alkyl-3-methylimidazolium-based ionic liquids as background electrolyte in capillary zone electrophoresis for the simultaneous determination of five anthraquinones in Rhubarb

A capillary zone electrophoresis method using only 1-alkyl-3-methylimidazolium-based ionic liquids as background electrolyte for the simultaneous determination of five anthraquinone derivatives including aloe-emodin, emodin, chrysophanol, physcion and rhein in Rhubarb species was described. Ion association constants, K_ass, between anthraquinone anions and imidazolium cations were determined by analyzing the electrophoretic mobility change of anthraquinone anions using a non-linear least-squares method and factors contributing to ion associability were systematically clarified. For method optimization, several parameters such as ionic liquids concentration, background electrolyte pH and applied voltage, on the separation were evaluated and the optimum conditions were obtained as follows: 90 mM 1-butyl-3-methylimidazolium tetrafluoroborate (pH 11.0) with an applied voltage of 20 kV. Under these conditions, the method has been successfully applied to the determination of anthraquinones in extracts of two kinds of Rhubarb plants (R. palmatum and R. hotaoense) within 12 min. The method proposed herein was shown to be much simpler than the previously reported methods.     

pH effect on dynamic coating for capillary electrophoresis of DNA

A buffer consisting of tris(hydroxymethyl)aminomethane, 2-(N-moropholino)ethanesulfonic acid (Mes) and EDTA with constant ion strength was used to investigate the effect of buffer pH on the dynamic coating behavior of poly(N-isopropylacrylamide) (PNIPAM) for DNA separation. The atomic force microscopy (AFM) image illustrated that PNIPAM in lower-pH buffer was much more efficient in covering a silica wafer than that in higher-pH buffer. The coating performance of PNIPAM was also quantitatively analyzed by Fourier transform IR attenuated total reflectance spectroscopy and by measuring the electroosmotic flow (EOF). These results indicated that the stability of the dynamic coating was dependent on the pH of the sieving matrix and was improved by reducing the pH to the weak-acid range. The lower pH of the sieving buffer may induce the polymer more efficiently to adsorb on the capillary wall to suppress EOF and DNA–capillary wall interaction for DNA separation. The enhanced dynamic coating capacity of PNIPAM in lower-pH buffer may be attributed to the hydrogen bonds between the hydroxyl groups of the silica surface and the oxygen atom of the carbonyl groups of PNIPAM.     

Prediction of the separation of phenols by capillary zone electrophoresis

The effect of pH and ionic strength on the migration of neutral acids in capillary zone electrophoresis (CZE) has been studied for several phenols. The mobilities of the phenols and the efficiency of the capillary have been related to the studied factors. The mobility can be related to the pH of the running buffer through the mobility of the phenolate ion, and the conditional acidity pK value of the phenol at the working ionic strength. This allows prediction of the migration of the phenol, solely from its pK_a^′ value (literature pK_a corrected for the ionic strength of the solution) and mobility of the anion, which can be easily calculated from the mobility at a basic pH value and the pK_a^′ value. Combination of the predicted mobility with the efficiency allows estimation of the resolution of the consecutive peaks obtained for a mixture of phenols. This method has been tested for two groups of phenols of environmental interest.     

On the pH hysteresis of electroosmotic mobility with capillary zone electrophoresis in silica capillary

Summary A porous gel model of silica-solution interface was proposed to explain the pH hysteresis effect on the electroosmotic mobility with capillary zone electrophoresis in silica capillaries. It is speculated that, under acidic preconditionings of the capillaries, a porous gel layer is formed at the silica-solution interface, and the magnitudes of potential and electroosmotic mobility are then reduced due to the penetration of electrolyte counterions to the gel layer. On the other hand, under basic preconditionings, a fresh silica surfaces is created by dissolution of silica in alkaline conditions, and this would result in higher values of potential and electroosmotic mobility. The Guoy-Chapman-Stern-Grahame model was employed to simulate the pH-dependence of electroosmotic mobility for the silica capillaries with a gelling surface and with a fresh surface. The predicted data were compared with the experimental results and shown to support the explanation.     

Determination of preservatives in soft drinks by capillary electrophoresis with ionic liquids as the electrolyte additives

A capillary electrophoresis method for separating preservatives with various ionic liquids as the electrolyte additives has been developed. The performances for separation of the preservatives using five ionic liquids with different anions and different substituted group numbers on imidazole ring were studied. After investigating the influence of the key parameters on the separation (the concentration of ionic liquids, pH, and the concentration of borax), it has been found that the separation efficiency could be improved obviously using the ionic liquids as the electrolyte additives and tested preservatives were baseline separated. The proposed capillary electrophoresis method exhibited favorable quantitative analysis property of the preservatives with good linearity (r² = 0.998), repeatability (relative standard deviations ≤ 3.3%) and high recovery (79.4–117.5%). Furthermore, this feasible and efficient capillary electrophoresis method was applied in detecting the preservatives in soft drinks, introducing a new way for assaying the preservatives in food products.     

Use of 1-alkyl-3-methylimidazolium-based ionic liquids as background electrolytes in capillary electrophoresis for the analysis of inorganic anions

Separation of inorganic anions in CE is often a challenging task because the electrophoretic mobilities of inorganic anions are comparable to or even greater than the EOF mobility. In this study, we present the use of ionic liquids (ILs) as background electrolytes (BGEs) in CE of inorganic anions. The 1-alkyl-3-methylimidazolium-based ILs as BGEs dynamically coated the capillary wall and induced a reversed EOF. This allowed the anions to comigrate with the EOF and yielded a rapid separation. Increasing the alkyl chain length of the ILs and BGE concentration can significantly improve the separation resolution. With 40 mM 1-butyl-3-methylimidazolium tetrafluoroborate as BGE, good separations of five model anions (Br-, I-, NO2(-), NO3(-), and SCN-) were achieved in a range of buffer pH values. The separation efficiency was as high as 34 600-155 000, and the RSDs of the migration times were less than 0.8% (n = 5).     

Optimization of background electrolyte composition for simultaneous contactless conductivity and fluorescence detection in capillary electrophoresis of biological samples

In this article, optimization of BGE for simultaneous separation of inorganic ions, organic acids, and glutathione using dual C⁴D‐LIF detection in capillary electrophoresis is presented. The optimized BGE consisted of 30 mM 2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]ethanesulfonic acid, 15 mM 2‐amino‐2‐hydroxymethyl‐propane‐1,3‐diol, and 2 mM 18‐crown‐6 at pH 7.2 and allowed simultaneous separation of ten inorganic anions and cations, three organic acids and glutathione in 20 min. The samples were injected hydrodynamically from both capillary ends using the double‐opposite end injection principle. Sensitive detection of anions, cations, and organic acids with micromolar LODs using C⁴D and simultaneously glutathione with nanomolar LODs using LIF was achieved in a single run. The developed BGE may be useful in analyses of biological samples containing analytes with differing concentrations of several orders of magnitude that is not possible with single detection mode.     

Velocity-difference induced focusing of xanthine and purine metabolites by capillary electrophoresis using a dynamic pH junction

Summary Velocity-difference induced focusing (V-DIF) of analytes by a dynamic pH junction represents a simple yet effective on-line preconcentration method to improve concentration sensitivity in capillary electrophoresis (CE). Differences in buffer type, pH and conductivity between sample and background electrolyte (BGE) segments of the capillary are properties used to optimize purine focusing within a multi-section electrolyte system. This method permits the injection of large volumes of sample (up to 450 nL or about 18% of capillary length), resulting in over a 50-fold improvement in sensitivity with baseline resolution. The limit of detection (S/N=3) for xanthine is determined to less than 4.0×10⁻⁸ M under optimum conditions when using UV detection. Analysis of micromolar amounts of xanthine in pooled urine is also demonstrated without sample pretreatment. A dual mechanism involving dynamic pH and isotachophoretic modes is proposed to enhance analyte focusing performance when employing buffer pH junctions based on different types of electrolyte co-ions.     

N-methylformamide as a separation medium in capillary electrophoresis

Summary The organic solvent N-methylformamide (NMF) has been used as a separation medium in capillary electrophoresis. The advantageous properties of this compound are its high dielectric constant, high solubilizing power and low conductivity, as well as its amphiprotic character. It was shown that, unlike for most organic solvents, the electroosmotic flow is substantial. It was found to be possible to utilize NMF without added electrolyte. Field strengths exceeding 1000 volts/cm could be employed, while a low current was maintained and it was thus possible to obtain rapid analyses. Also, the properties of NMF allowed the analysis of substances with a low solubility in aqueous media. These features are exemplified by separation of carboxylic acids and pharmaceuticals. Excellent reproducibility of migration and no sign of electrical breakdown were observed, even under high field strength conditions.Presented at the Sixth International Symposium on High Performance Capillary Electrophoresis, Jan. 31–Feb. 9, 1994, San Diego, USA, Poster #P-113.