Synthesis and properties of novel aromatic polyamides based on “multi-ring” flexible dicarboxylic acids

The five benzene rings-containing (hereafter referred to as “five-ring”) dicarboxylic acids α,α′-bis[4-(4-carboxyphenoxy)phenyl]-1,4-diisopropylbenzene (p- III ) and α,α′-bis[4-(4-carboxyphenoxy)phenyl]-1,3-diisopropylbenzene (m- III ) were prepared by the fluoro-displacement of α,α′-bis(4-hydroxyphenyl)-1,4-diisopropylbenzene and α,α′-bis(4-hydroxyphenyl)-1,3-diisopropylbenzene with p-fluorobenzonitrile, and subsequent alkaline hydrolysis of the intermediate dinitriles. A number of high-molecular-weight polyamides based on these two “five-ring” dicarboxylic acids (p- III and m- III ) and various aromatic diamines were directly synthesized in N-methyl-2-pyrrolidone (NMP) containing lithium chloride (LiCl) or calcium chloride (CaCl₂) using triphenyl phosphite and pyridine as condensing agents. These polyamides were obtained with inherent viscosities above 0.51 and up to 0.91 dL/g. The weight-average molecular weight were in the range of 51,000–211,000. Most of these polyamides were amorphous and readily soluble in polar solvents such as NMP, N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), and dimethyl sulfoxide (DMSO), and afforded tough, flexible, and transparent films by solution-casting. The films had tensile strength of 50–83 MPa, elongation to break of 4–8%, and tensile modulus of 1.3–2.0 GPa. Most polyamides showed distinct glass transitions on the differential scanning calorimetry (DSC) curves ranging from 147 to 177°C. In nitrogen or air, all the polymers showed no significant weight loss up to 490°C, as indicated by thermogravimetric analysis (TG). © 1996 John Wiley & Sons, Inc.     

The synthesis of novel polycyclic heterocyclic ring systems via photocyclization. 9. Phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline,benzo[f]phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline,and benzo[h]-phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline

The synthesis of three novel polycyclic heterocyclic ring systems are reported via photocyclization. The specific final products in these ring systems are: phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline ( 13 ), benzo[h]-phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline ( 14 ), and benzo[f]phenanthro[9′,10′:4,5]thieno[2,3-c]quinoline ( 15 ).     

A Novel,One‐Pot Four‐Component Route to 2′‐Thioxo‐2′,3′‐dihydrospiro[indole‐3,6′‐[1,3]thiazin]‐2‐one Derivatives

An efficient route to 2′,3′‐dihydro‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives is described. It involves the reaction of isatine, 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one, and different amines in the presence of CS₂ in dry MeOH at reflux (Scheme 1). The alkyl carbamodithioate, which results from the addition of the amine to CS₂, is added to the α,β‐unsaturated ketone, resulting from the reaction between 1‐phenyl‐2‐(1,1,1‐triphenyl‐λ⁵‐phosphanylidene)ethan‐1‐one and isatine, to produce the 3′‐alkyl‐2′,3′‐dihydro‐4′‐phenyl‐2′‐thioxospiro[indole‐3,6′‐[1,3]thiazin]‐2(1H)‐one derivatives in excellent yields (Scheme 2). Their structures were corroborated spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses.     

Studies in spiroheterocycles. Part XIII. Synthesis of a novel spiro system: Spiro[9H-acridine-9,3′-[3h]indol]-2′(1′H)-one and related compounds from new fluorinated spiro[3H-indole-3,9′-[9H]xanthen]-2(1H)-ones

A new spiroheterocyclic system spiro[9H-acridine-9,3′-[3H]indol]-2′(1′H)-one and related compounds have been prepared by the reaction of spiro[3H-indole-3,9′-[9H]xanthen]-2(1H)-ones with aromatic amine or ammonium acetate. The latter were prepared by heating fluorinated indole-2,3-diones with m-/p-cresols or α-naphthol in the presence of sulphuric acid at 230-240°. The synthesized compounds have been characterized on the basis of their elemental analyses, ir, nmr (1_H, 13_C, 19_F) and mass spectral data.     

α,α′‐Diarylacenaphtho[1,2‐c]phosphole P‐Oxides: Divergent Synthesis and Application to Cathode Buffer Layers in Organic Photovoltaics

A divergent method for the synthesis of α,α′‐diarylacenaphtho[1,2‐c]phosphole P‐oxides has been established; α,α′‐dibromoacenaphtho[c]phosphole P‐oxide, which was prepared through a Ti^II‐mediated cyclization of 1,8‐bis(trimethylsilylethynyl)naphthalene, underwent a Stille coupling with three different kinds of aryltributylstannanes to afford the α,α′‐diarylacenaphtho[c]phosphole P‐oxides in moderate to good yields. X‐ray crystallographic analyses and UV/Vis absorption/fluorescence measurements have revealed that the degree of π‐conjugation, the packing motif, the electron‐accepting ability, and the thermal stability of the acenaphtho[c]phosphole π‐systems are finely tunable with the α‐aryl substituents. All the P?O and P?S derivatives exhibited high stability in their electrochemically reduced state. To use this class of arene‐fused phosphole π‐systems as n‐type semiconducting materials, we evaluated device performances of the bulk heterojunction organic photovoltaics (OPV) that consist of poly(3‐hexylthiophene), an indene‐C₇₀ bisadduct, and a cathode buffer layer. The insertion of the diarylacenaphtho[c]phosphole P‐oxides as the buffer layer was found to improve the power conversion efficiency of the polymer‐based OPV devices.     

Synthesis of nitrogen-containing heterocycles. 8. Preparation and ring-opening of spiro[cycloalkane-[1′,2′,4′]triazolo[1′,5′-c]pyrimidine] derivatives

Diaminomethylene- and aminomethylthiomethylenehydrazones [2] of cyclic ketones 1–8 readily reacted with ethoxymethylenemalononitrile to give spiro[cycloalkane-1,2′-[1,2′,4′]triazolo[1,5′-c]pyrimidine-8′-carbonitrile] derivatives 12–19 through the electrocyclic reaction of the initially formed condensation products 26 in moderate to high yields. The spiro[cyclopentanetriazolopyrimidine] derivatives underwent ring-opening at the cycloalkane moiety upon heating in solution to give 2-alkyl-5-substituted-[1,2,4]triazolo[1,5-c]pyrimidine-8′-carbonitriles 20–23 . When an alkyl substituent was introduced into the cyclopentane ring, cleavage of the spiro compounds occurred preferentially at the cyclopentane moiety between the spiro carbon and the more branched one. In contrast, the cyclohexane ring, especially of spiro-5-amino-triazolopyrimidines 17 and 18 strongly resisted to ring-opening under similar conditions, but those of 5-methylthiotriazolopyrimidines 14 gave up to 17 percent of cleavage after prolonged heating in hot ethanol. 2-t-Butyl-5-methylthio-2,3-dihydro[1,2,4]triazolo[1,5-c]pyrimidine-8-carbonitrile 25 [R³ = C(CH₃)₃] was highly susceptible to the cleavage even at room temperature and produced the corresponding 2-unsubstituted triazolopyrimidine 24 with loss of the t-butyl group.     

Diversity‐Oriented Synthesis of Novel 2′‐Aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] Derivatives via a One‐Pot Four‐Component Reaction

A sequential one‐pot four‐component reaction for the efficient synthesis of novel 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] derivatives 5 in the presence of AcONH₄ as a neutral, inexpensive, and dually activating catalyst is described (Scheme 1). The syntheses are achieved by reacting ninhydrin ( 1 ) with benzene‐1,2‐diamines 2 to give indenoquinoxalines, which are trapped in situ by malono derivatives 2 and various α‐methylenecarbonyl compounds 4 through cyclization, providing the multifunctionalized 2′‐aminospiro[11H‐indeno[1,2‐b]quinoxaline‐11,4′‐[4H]pyran] analogs 5 . This chemistry provides an efficient and promising synthetic way of proceeding for the diversity‐oriented construction of the spiro[indenoquinoxalino‐pyran] skeleton.     

[2.2. …] Metacyclophane

The synthesis of [2.2.2] metacyclophane (yield 7,5%), [2.2.2.2]metacyclophane (yield 1,7%), [2.2.2.2.2]metacyclophane (yield 5,1%), [2.2.2.2.2.2]metacyclophane (yield 3,1%) and [2.2.2.2.2.2.2.2]metacyclophane (yield 0,5%) by a WURTZ reaction with α,α'-dibromo-m-xylene is described. The structure of the new ring systems was confirmed by UV.-, NMR.- and mass spectra analyses. In connection with the resulting melting points and NMR.-spectra probable conformations of these higher ring systems are discussed.     

Synthesis of two novel ring systems via photocyclization: Thieno[2′,3′:4,5]thieno[2,3-c][1,10]phenanthroline and thieno[3′,2′:4,5]thieno[2,3-c][1,10]phenanthroline

The synthesis of thieno[2′,3′:4,5]thieno[2,3-c][1,10]phenanthroline ( 5 ) and thieno[3′,2′:4,5]thieno-[2,3-c][1,10]phenanthroline ( 10 ) are described. Each compound was obtained in four steps from known starting materials. The basic skeleton of the molecule and of the phenanthroline ring were formed via photocyclization. The total assignment of ¹H-nmr spectra was accomplished with the aid of two-dimensional nmr methods.     

The synthesis of novel polycyclic heterocyclic ring systems via photocyclization. 4 . Benzo[f]thieno[2′,3′:4,5]thieno[2,3-c]quinoline and Benzo[h]thieno[2′,3′:4,5]thieno[2,3-c]quinoline and the total assignment of their 1H- and 13C-NMR spectra

The synthesis of two novel polycyclic heterocyclic ring systems via photocyclization are reported. These are benzo[f]thieno[2′,3′:4,5]thieno[2,3-c]quinoline and benzo[A]thieno-[2′,3′:4,5]thieno[2,3-c]quinoline. The total assignment of their ¹H- and ¹³C-nmr spectra was determined by utilizing two-dimensional nmr spectroscopic methods.     

The synthesis of novel polycyclic heterocyclic ring system via photocyclization. 18. Benzo[h]naphtho-[1′,2′:4,5]thieno[2,3-c]quinoline and benzo[h]naphtho-[1′,2′:4,5]thieno[2,3-c] [1,2,4]triazolo[4,3-a]quinoline

The synthesis of two previously unknown polycyclic ring systems, benzo[h]naphtho[1′2′:4,5]-thieno[2,3-c]quinoline ( 1 ) and benzo[h]naphtho[1′,2′:4,5]thieno[2,3-c][1,2,4]triazolo[4,3-a]quinoline ( 2 ), was achieved via oxidative photocyclization of 1-chloro-N-(1-naphthyl)naphtho[2,1-b]thiophene-2-carboxamide ( 5 ). The total assignment of their ¹H and ¹³C nmr spectra was determined by the concerted use of two-dimensional nmr methods.     

Stereoselective synthesis of pyrrolo[2,3-d]pyrimidine α- and β-D-ribonucleosides from anomerically pure D-ribofuranosyl chlorides: Solid-Liquid Phase-Transfer Glycosylation and 15N-NMR Spectra

Solid-liquid phase-transfer glycosylation (KOH, tris[2-(2-methoxyethoxy)ethye]amine ( = TDA-1), MeCN) of pyrrolo[2,3-d]pyrimidines such as 3a and 3b with an equimolar amount of 5-O-[(1,1 -dimethylethyl)dimethylsilyl]-2,3-O-(1-methylethylidene)-α-D -ribofuranosyl chloride (1) [6] gave the protected β-D -nucleosides 4a and 4b , respectively, stereoselectively (Scheme). The β-D -anomer 2 [6] yielded the corresponding α-D -nucleosides 5a and 5b with traces of the β-D -compounds. The 6-substituted 7-deazapurine nucleosides 6a , 7a , and 8 were converted into tubercidin (10) or its α-D -anomer (11) . Spin-lattice relaxation measurements of anomeric ribonucleosides revealed that T₁ values of H? C(8) in the α-D -series are significantly increased compared to H? C(8) in the β-D -series while the opposite is true for T₁ of H? C(1′). ¹⁵N-NMR data of 6-substituted 7-deazapurine D -ribofuranosides were assigned and compared with those of 2′-deoxy compounds. Furthermore, it was shown that 7-deaza-2′deoxyadenosine ( = 2′-deoxytubercidin; 12 ) is protonated at N(1), whereas the protonation site of 7-deaza-2′-deoxyguanosine ( 20 ) is N(3).     

Synthesis of [D-alanine, 4'-azido-3',5'-ditritio-L-phenylalanine, norvaline4[alpha-melanotropin as a 'photoaffinity probe' for hormone-receptor interactions (author's transl)]

Synthesis of [D -alanine¹, 4′-azido-3′, 5′-ditritio-L -phenylalanine², norvaline⁴]α-melanotropin as a ‘photoaffinity probe’ for hormone-receptor interactions. The synthesis of an α-MSH derivative containing 4′-azido-3′,5′-ditritio-L -phenylalanine is described: Ac · D -Ala-Pap(³H₂)-Ser-Nva-Glu-His-Phe-Arg-Trp-Gly-Lys-Pro-Val · NH₂. This hormone analogue is being used for specific photoaffinity labelling of receptor molecules. The synthesis was performed in a way to minimize the number of radioactive steps and to introduce the radio-active and the photoaffinity label exclusively into position 2. The dipeptide N(α)-acetyl-D -alanyl- (4′-amino-3′,5′-diiodo)-L -phenylalanine was tritriated and transformed into the azido compound, N(α)-acetyl-D -alanyl-(4′-azido-3′,5′-ditritio)-L -phenylalanine which was then condensed with H · Ser-Nva-Glu(OtBu)-His-Phe-Arg-Trp-Gly-Lys(BOC)-Pro-Val · NH₂ to the tridecapeptide. The α-MSH analog displayed a specific activity of 11 Ci/mmol, and a biological activity of about 4 · 10⁹ U/mmol (10% of α-MSH).     

Crystallographic and computational study of a network composed of [ZnCl4]2− anions and triply protonated 4′‐functionalized terpyridine cations

We report herein the synthesis, crystallographic analysis and a study of the noncovalent interactions observed in the new 4′‐substituted terpyridine‐based derivative bis[4′‐(isoquinolin‐2‐ium‐4‐yl)‐2,2′:6′,2′′‐terpyridine‐1,1′′‐diium] tris[tetrachloridozincate(II)] monohydrate, (C₂₄H₁₉N₄)₂[ZnCl₄]₃·H₂O or (ITPH₃)₂[ZnCl₄]₃·H₂O, where (ITPH₃)³⁺ is the triply protonated cation derived from 4′‐(isoquinolin‐4‐yl)‐2,2′:6′,2′′‐terpyridine (ITP) [Granifo et al. (2016). Acta Cryst. C 72 , 932–938]. The (ITPH₃)³⁺ cation presents a number of interesting similarities and differences compared with its neutral ITP relative, mainly in the role fulfilled in the packing arrangement by the profuse set of D —H…A [D (donor) = C, N or O; A (acceptor) = O or Cl], π–π and anion…π noncovalent interactions present. We discuss these interactions in two different complementary ways, viz. using a point‐to‐point approach in the light of Bader's theory of Atoms In Molecules (AIM), analyzing the individual significance of each interaction, and in a more `global' analysis, making use of the Hirshfeld surfaces and the associated enrichment ratio (ER) approach, evaluating the surprisingly large co‐operative effect of the superabundant weaker contacts.     

The synthesis of novel polycyclic heterocyclic ring systems via photocyclization. 1. Thieno[3′,2′:4,5]thieno[2,3-c]quinoline and thieno[2′,3′:4,5]thieno[2,3-c]quinoline

The synthesis of two previously unknown heterocyclic ring systems, namely, thieno[3′,2′:4,5]thieno[2,3-c]-quinoline and thieno[2′,3′:4,5]thieno[2,3-c]quinoline is reported. These two novel ring systems were assembled by photocyclization of the appropriate anilides.     

Chemie des 2-Aminospiro[indan-1,3′-pyrrolidin]-Systems

The chemistry of the 2-aminospiro[indan-1,3′-pyrrolidine]system 2-Aminospir[indan-1,3′-pyrrolidines] 1 are easily synthesized from the α-hydroxyiminoketones 6 and 19 (Schemes 2 and 3, and 6 respectively). Removal of the N-acetyl group in the intermediate 8 of the trans series induces transposition to the 3a-aminomethyl-indano[2,1-b]pyrrolidine system. The configurations of all compounds have been determined by ¹H-NMR. spectroscopy.     

On triazoles XLIV [1]. synthesis of new ring systems containing imidazo[2′,1′:3,4] [1,2,4] triazolo [1,5‐a]pyrimidine and imidazo[1′,2′:2,3][1,2,4]triazolo[1,5‐a]pyrimidine skeleton

Dedicated to Dr. János Császár on the occasion of his 70^th birthday Ring transformation of 2‐cyanoimido‐3‐methyl‐1,3‐oxazolidine ( 10 ) yielded 5‐amino‐3‐[N‐(2‐hydrox‐yethyl)‐N‐methyl]amino‐1H‐1,2,4‐triazole ( 6 ) that was ring closed with different β‐keto esters to 2‐[N‐(2‐hydroxyethyl)‐N‐methyl]amino‐1,2,4‐triazolo[1,5‐a]pyrimidinones ( 4 ). Cyclisation of derivatives 4 led to imidazo[2′,1′:3,4][1,2,4]triazolo[1,5‐a]pyrimidines ( 2 ) and imidazo[1′,2′:2,3][1,2,4]triazolo[1,5‐a]pyrim‐idines ( 3 ) representing 10 novel ring systems. Besides spectroscopical evidence of structure of derivatives 2 and 3 X‐ray diffraction analysis of derivative 2b was also performed.     

A convenient synthesis for some new pyrido[3′,2′:4,5]thieno-[3,2-d]pyrimidine derivatives with potential biological activity

Ready, convenient synthesis for 8-cyano-7-ethoxy-4-oxo-9-phenyl-2-substituted-1,2,3,-4-tetrahydropyrido-[3′,2′:,4,5]thieno[3,2-d]pyrimidines 5 , 8-cyano-7-ethoxy-4-oxo-9-phenyl-2-substituted-3,4-dihydropyrido[3′,2-: 4,5]thieno[3,2-d]pyrimidines 6 , 4-chloro-8-cyano-7-ethoxy-9-phenyl-2-substitutedpyrido[3′,2′:4,5]thieno[3,2-4 -pyrimidines 7 and 8-cyano-7-ethoxy-2-(2′-nitrophenyl)-9-phenyl-4-substitutedpyrido[3′,2′:4,5]thieno[3,2- d ]pyrimidines 8-18 from 2-chloro-3,5-dicyano-6-ethoxy-4-phenylpyridine 1 via 3,5-dicyano-6-ethoxy-2-mercapto-4-phenylpyridine 2 and aminocarboxamide 4 are reported. In addition, the reaction of hydrazino derivative 12 with reagents such as formic acid and triethyl orthoformate yielded the fused tetraheterocyclic 8-cyano-9- ethoxy-5-(2′-nitrophenyl)- 7-phenylpyrido[3′,2′:4,5]thieno[2,3-e]-1, 2,4-triazolo[4,3-c]pyrimidine system 19 .     

The Synthesis of Novel Polycyclic Heterocyclic Ring Systems via Photocyclization. 12. Benzo[h]naphtho-[2′,1′:4,5]thieno[2,3-c]quinoline and benzo[f]-naphtho[2′,1′:4,5]thieno[2,3-c]quinoline

The synthesis of two previously unknown heterocyclic ring systems, namely benzo[h]naphtho[2′,1′:4,5]thi-eno[2,3-c]quinoline (1) and benzo[f]naphtho[2′,1:4,5]thieno[2,3-c]quinoline (2) was accomplished via photocyclization of the appropriate amides followed by chlorination and catalytic dechlorination. The total assignment of ¹H and ¹³C nmr spectra of 2 was determined utilizing two-dimensional nmr methods, providing unequivocal structural proof of the two novel polycyclic ring systems.