Air/polymer distribution coefficients for polycyclic aromatic hydrocarbons by solid-phase microextraction sampling

Two methods to estimate distribution coefficients (K) between air and poly(dimethylsiloxane) (PDMS) coating of solid-phase microextraction (SPME) fibers for eight low molecular polycyclic aromatic hydrocarbons (PAHs) there are presented. The PDMS phases were used for determination of the coefficients according to equilibrium theory with help of a developed static calibration system (SCS). Another way to estimate the coefficients is based on the use of a linear relationship between the logarithm of the coefficients (log K) and linear temperature-programmed retention indexes (LTPRI) of the compounds without necessity to calibrate. The log K values for both of methods ranged from 5.2 (naphthalene) to 8.9 (pyrene) at 22 degrees C. Relative standard deviation (R.S.D.) of log K for each compound determined by static calibration was no more than 5.3%. R.S.D. of retention times for LTPRI indices did not exceed 0.28% for repeated injection. All experiments were implemented on a GC-MS system.     

Using Bezier curves for the calculation of retention indices of polycyclic aromatic hydrocarbons in the so-called Lee's scale in temperature-programmed gas chromatography with mass spectrometry detection

The retention indices of some polycyclic aromatic hydrocarbons (PAHs) separated by temperature-programmed gas chromatography are computed by smoothing reference data with Bezier curves of orders 6 are more consistent with the scheme of this retention parameter, and they present standard deviations systematically smaller than those associated with classical retention indices. The Bezier curve possesses the property of local control, (i.e., their graphs are modified only in the neighbourhood of the displaced point). The values thus obtained were compared with the corresponding ones calculated in a classical way. Detailed statistical analysis is presented to describe the retention indices of PAHs expressed in the so-called Lee's scale as a function of retention temperatures (in degrees C). As a training set, experimental retention data of PAHs obtained on a PE-5 phase is used for correlation. As prediction sets, literature experimental retention indices expressed in the so-called Lee's scale obtained on a DB-5 slightly polar stationary phase are applied for comparison. The method developed is successfully used for estimating and predicting the capillary gas chromatography retention index of PAHs.     

毛细管气相色谱/傅立叶变换红外光谱分析高温煤焦油中的重油馏分

 在原有工作基础上,采用毛细管气相色谱/傅立叶变换红外光谱-色谱保留指数(GC/FTIR-RI)联合解析技术,研究了高温煤焦油重油馏分的化学组成。分别从重油馏分F7(300～330℃)和F8(330～360℃)中分离并鉴定出70和61种化合物,了解到不同配煤工艺对煤焦油组成与性能的影响,从而获得了一些有意义的结果,为煤焦油的集中加工和新产品开发提供了重要依据     

Application of the electrostatic interaction concept for the study of the retention behaviour of peropyrene-type polycyclic aromatic hydrocarbons in reversed-phase liquid chromatography

Summary Capacity factors of peropyrene-type polycyclic aromatic hydrocarbons were measured using 15 different liquid chromatographic reversed phase systems. On the basis of the retention data the electric interaction indices have been calculated. Application of these indices for structure-retention studies on peropyrene-type polycyclic aromatic hydrocarbons is demonstrated.     

The role of electric interaction in the retention index cencept. Universal interaction indices for GLC,HPLC and TLC

Summary New electric interaction indices are proposed which can universally be used in GLC, HPLC and TLC. These indices can easily be calculated from a variety of the commonly used retention parameters, such as Kováts' retention indices, relative retention times, capacity factors, or R_F values, and the average molecular polarizabilities of the reference compounds. Calculation examples for polycyclic aromatic hydrocarbons and n-alkanes are given. Application of the electric interaction indices for studying the retention mechanism is demonstrated.     

Retention system, thermodynamic properties and structure correlations of environmental analytes

Summary A composite chromatographic retention index system has been developed for identifying polycyclic aromatic hydrocarbons, polychlorinated biphenyls and polychlorinated pesticides. When retention indices and thermodynamic data of polycyclic aromatic hydrocarbons on 5% phenylmethylsiloxane stationary phase were compared with those obtained on polydimethylsiloxane a correlation was found between retention and electronic properties. Determination and quantitation of individual contaminants in water and sediment samples from Lake Mecoacán were achieved by capillary gas chromatography with flame ionization and electrocapture detection.     

Determination of average molecular polarizabilities of polycyclic aromatic hydrocarbons directly from retention indices

Summary A significant correlation has been found between the retention indices of polycyclic aromatic hydrocarbons on non-polar stationary phases and the average molecular polarizabilities of the molecules separated on these phases. Equations have been derived for the determination of the average molecular polarizabilities, directly from the retention indices.     

Temperature-programmed retention indices for gas chromatography-mass spectroscopy analysis of plant essential oils

A total of 95 volatile compounds from the essential oil in buds of Syringa oblata Lindl (lilac) were identified by gas chromatography-mass spectrometry (GC-MS) combined with heuristic evolving latent projections (HELP) and moving subwindow searching (MSS). The identified compounds are mainly aliphatic, terpenes and aromatic compounds. Their temperature-programmed retention indices (PTRIs) on HP-5MS and DB-35MS at three heating rates of 2, 4 and 6 degrees C/min from 80 to 290 degrees C were obtained, which showed that aliphatic compounds give nearly constant PTRIs and PTRIs of terpenoids do not vary much at different heating rates. But PTRIs of aromatic compounds exhibit relatively large temperature dependence. PTRIs vary much more on DB-35MS than those on HP-5MS according to the compound types. In general, differences of PTRIs between the two columns increase from aliphatic compounds to terpenoids to polycyclic aromatic compounds. The PTRIs in different heating rates were used as cross-references in the identification of components in the essential oil. When they were used in analysis of essential oil from flowers of lilac, good results were obtained. These PTRIs would be a part of our PTRI database being constructed on components from plant essential oils. The results also showed that efficiency and reliability were improved greatly when chemometric method and PTRIs were used as assistants of GC-MS in identification of chemical components in plant essential oils.     

Retention prediction of large and condensed polycyclic aromatic hydrocarbons in reversed-phase microcolumn liquid chromatography with diphenylsilica stationary phase

The retention behavior of condensed large polycyclic aromatic hydrocarbons has been investigated with diphenylsilica stationary phases in reversed-phase microcolumn liquid chromatography. The results were correlated with two parameters which indicate size and shape of the molecules. Since the resulting equation can be used for retention prediction of large polycyclic aromatic hydrocarbons, computer-assisted “standardless” identification is accomplished for “unknown” compounds contained in the standard.     

Kovats and lee retention indices determined by gas chromatography/mass spectrometry for organic compounds of environmental interest

Retention indices of standard organic compounds of environmental interest were determined by gas chromatography/mass spectrometry, using a DB-5 fused-silica capillary column. Retention indices are useful references for tentative compound identification by gas chromatography, or confirmation by gas chromatography/mass spectrometry. They provide elution order for isomers that might be indistinguishable based on mass spectra. Modified Kovats and Lee retention indices are given for polycyclic aromatic hydrocarbons; sulfur heterocycles; nitrogen heterocycles; aromatic amines; oxygen heterocycles; phenols; alcohols; ketones; alkanes; nitriles; and methylesters of fatty, dicarboxylic, and aromatic acids for comparison and reference. Retention index values for heterocycles by gas chromatography/mass spectrometry are comparable with gas chromatography values previously reported.     

Advanced Methodologies for Adsorption/Thermal Desorption with Tenax-TA for the Analysis of Polycyclic Aromatic Hydrocarbons and Sulfur Compounds

We have evaluated an analytical method for the determination of polycyclic aromatic hydrocarbons (PAHs) and sulfur compounds in air by means of adsorption/temperature-programmed thermal desorption (ATPTD) with small bed volume (0.08g) Tenax-TA cartridges, followed by a cryogenic trap in a precolumn with liquid nitrogen as an appropriate concentration method before capillary gas chromatography is described. The enriched components from the adsorption cartridges are transferred to the capillary column with a valveless switching system. Recoveries were determined for the complete ATPTD method. Desorption recoveries near 100% were found for various of polycyclic aromatic hydrocarbons and sulfur compounds. The sulfur compounds known to cause nuisance odors in the atmosphere near sulfur recovery and sewerage treatment works were also determined.     

Gas chromatographic system for the identification of halogenated pesticides by retention indices using n-alkanes as standards

A gas chromatographic system for the evaluation of linear temperature-programmed retention indices allowing n-alkanes to be adopted as the reference retention markers for any type of analyte, irrespective of the atoms present in their molecules, is described. It is based on the simultaneous use of two different detectors (a flame ionization detector and a specific detector suitable for the sample components), both connected (in parallel) to the same column outlet. The performance of this system has been tested by measuring the retention indices of fifteen chlorinated pesticides under conditions of linear programming temperature, by adopting an electron-capture detector as the specific detector. The reliability of the retention indices thus determined has been proven by verifying that they can be reproduced under different chromatographic conditions.     

Quantitative Structure-Property Relationship: XXII. Polycyclic Aromatic Hydrocarbons

The previously suggested quantitative structure-property relationship was applied to estimating the properties of polycyclic aromatic hydrocarbons containing from two to six benzene rings fused in various modes. For these compounds, the boiling points, retention indices, and distribution factors in the octanol-water system were calculated. The results obtained are well consistent with the experimental data.     

Model for predicting comprehensive two-dimensional gas chromatography retention times

A model for approximating the relative retention of solutes in comprehensive two-dimensional gas chromatography (GCxGC) is presented. The model uses retention data from standard single-column temperature-programmed separations. The one-dimensional retention times are first converted into retention indices and then these indices are combined in a simple manner to generate a retention diagram. A retention diagram is an approximation of the two-dimensional chromatogram that has retention order and spacing in both dimensions similar to that found in the experimental chromatogram. If required, the retention diagram can be scaled to more closely resemble the two-dimensional chromatogram. The model has been tested by using retention time data from single-column gas chromatography-mass spectrometry and valve-based GCxGC. A total of 139 volatile organic compounds (VOCs) were examined. Approximately half of the VOCs had a single functional group and a linear alkyl chain (i.e., compounds with the structure Z-(CH(2))(n)-H). The retention diagrams had primary retention orders that were in excellent agreement with the GCxGC chromatograms. The relative secondary retention order for compounds with similar structures was also accurately predicted by the retention diagram. However, the relative secondary retention for compounds with dissimilar structures, such as acyclic alcohols and multi-substituted alkylbenzenes, were less accurately modeled. This study demonstrates how readily available single-column retention time data can be used to provide an a priori estimate of the relative retention of solutes in a GCxGC chromatogram. Such a capability is useful for screening possible combinations of stationary phases.     

Relationship between the average molecular polarizabilities of polycyclic aromatic hydrocarbons and their retention indices determined on various stationary phases

The Kováts retention indices of 10 polycyclic aromatic hydrocarbons were determined on SE-30, OV-101, SE-52, OV-7 and OV-17 stationary phases. A significant correlation has been found between the retention indices and the average molecular polarizabilities of the analyzed substances. Equations were derived for the direct determination of the average molecular polarizabilities from the retention index values. The influence of the temperature on this relationship is also indicated.     

Structure-type separation of diesel fuels by solid phase extraction and identification of the two- and three-ring aromatics by capillary GC-mass spectrometry

A simple and effective solid phase extraction (SPE) method using silica gel micro glass columns has been developed for the separation of diesel fuel into groups of aliphatic, and mono-, di- and polyaromatic hydrocarbons. It is based on a stepwise gradient of dichloromethane in n-pentane. The resulting fractions were analyzed by capillary gas chromatography with a flame ionization detector and coupled gas chromatography-mass spectrometry. Commercially available standards, and retention indices and mass spectra were used for identification of individual aromatic compounds. The principal polycyclic aromatic hydrocarbons (PAHs) in diesel fuel are naphthalene, biphenyl, fluorene, phen-anthrene and their alkylated derivatives. Sulfur-containing PAHs are mainly represented by methyl-substituted dibenzo-thiophenes.     

beta-Cyclodextrin as a stationary phase for the group separation of polycyclic aromatic compounds in normal-phase liquid chromatography

The separation of highly alkylated polycyclic aromatic compounds according to the size of their aromatic system is investigated using the polycyclic aromatic sulfur heterocycles in vacuum gas oil. A large number of reference compounds containing several parent ring systems and different alkylation patterns were first investigated to characterize the retention of polycyclic aromatic compounds likely to occur in high-boiling petroleum samples. A beta-cyclodextrin phase, Merck ChiraDex, was found to be more suitable than chemically bonded aminopropanosilane and tetrachlorophthalimide in normal-phase HPLC with respect to a combination of selectivity towards the number of aromatic double bonds and degree of influence of the alkyl groups of the aromatic compounds. Finally the preseparated polycyclic aromatic sulfur heterocycles from a vacuum gas oil were fractionated according to the number of condensed aromatic rings on the ChiraDex phase and were characterized by Fourier transform ion cyclotron resonance mass spectrometry.     

Polycyclic Aromatic Hydrocarbons Formation from Fuel and Additives Combustion

A study has been made of the effect of additives to the fuel of a turbulent diffusion flame on the formation of soot and polycyclic aromatic hydrocarbons (PAHs). Fuels containing a polystyrene thickener doped with benzene proved to have many advantages over unthickened fuels. Most significant were an increase in the burning time and the flash point. Nevertheless, polystyrene and benzene additives to a considerable extent increased the formation of soot and PAHs. The analysis of PAHs in this study was made by capillary gas chromatography (GC) and capillary gas chromatography/mass spectrometry (GC/MS). A total of 42 individual compounds were characterized by their retention indices and mass spectra.