C59O的结构,电子光谱及NMR谱的理论预测

用ＩＮＤＯ系列方法对Ｃ６０的取代产物Ｃ５９Ｏ进行几何构型优化，得到Ｃｓ对称性的稳定构型，以此构型为基础，计算并预测了Ｃ５９Ｏ的电子光谱和ＮＭＲ谱。最后与Ｃ５９Ｏ的等电子分子体Ｃ＾２－６０及Ｃ６０Ｏ进行了比较。     

甲基多巴透过POPC磷脂双层膜过程的分子动力学模拟

采用分子动力学模拟研究甲基多巴分子透过磷脂双层膜的动力学机制.研究所采用的磷脂双层膜是一种卵磷脂脂质分子双层膜,即1-棕榈酰-2-油酰-卵磷脂(POPC)双层膜,分子动力学模拟基于Gromacs程序.通过分子动力学模拟获得甲基多巴透过POPC双层膜的自由能垒是99.9 kJ·mol-1(310 K),显示甲基多巴分子可以透过细胞生物膜.模拟获得甲基多巴在POPC双层膜中间层扩散运动的自由能垒是16.9-27.7 kJ·mol-1(310 K),证明甲基多巴分子在细胞膜中间层容易扩散.研究工作加深了对甲基多巴治疗高血压病机制的理解,促进研发治疗高血压病的新药物.     

甲基多巴透过POPC磷脂双层膜过程的分子动力学模拟

采用分子动力学模拟研究甲基多巴分子透过磷脂双层膜的动力学机制. 研究所采用的磷脂双层膜是一种卵磷脂脂质分子双层膜,即1-棕榈酰-2-油酰-卵磷脂（POPC）双层膜,分子动力学模拟基于Gromacs程序. 通过分子动力学模拟获得甲基多巴透过POPC双层膜的自由能垒是99.9 kJ·mol^-1（310 K）,显示甲基多巴分子可以透过细胞生物膜. 模拟获得甲基多巴在POPC双层膜中间层扩散运动的自由能垒是16.9-27.7 kJ·mol^-1（310 K）,证明甲基多巴分子在细胞膜中间层容易扩散. 研究工作加深了对甲基多巴治疗高血压病机制的理解,促进研发治疗高血压病的新药物.     

C28X4（X=H,Cl）,CX4（X=H,Cl）的结构和电子光谱的理论研究

用ＩＮＤＯ法对Ｃ２８Ｘ４（Ｘ＝Ｈ，Ｃｌ）和ＣＸ４（Ｘ＝Ｈ，Ｃｌ）进行几何构型优化，得到Ｔｄ对称性的构型Ｃ２８Ｘ４有４种键、４种不等同原子，基态为稳定的闭壳层分子，以此构型为基础计算了上述分子的电子光谱，并预测Ｃ２８Ｘ４的电子光谱。     

碳笼烯C32和碳笼烷C32H32的量子化学研究

用量子化学计算方法ＭＮＤＯ和ＡＭ１研究了具有Ｏｈ对称性的碳笼烯Ｃ３２和碳笼烷Ｃ３２Ｈ３２的几何结构和电子结构及其稳定性，ＡＭ１水平下，评论Ｃ３２的基态性质和分子振动。     

螺旋共轭化合物及其相对应的多烯及联苯连接合物的结构,？…

用ＡＭ１和ＩＮＤＯ／ＣＩ方法研究了螺旋共轭化合物Ｉ的结构和电子光谱，并在此基础上，用完全态求和公式（ＳＯＳ，自编程序）计算了二阶非线性光学系数βμ，把结果与其对应的多烯及联苯连接的化合物Ⅱ和Ⅲ用同一方法计算得到的结果加以比较，发现螺旋共轭化合物Ⅰ的二阶非线性光学系数βμ虽然小于ⅡⅢ，但其透明性均比化合物Ⅱ和Ⅲ好。     

铝镁混合金属氢氧化物溶胶阴离子交换性能研究

本文研究了电解质对铝镁混合金属氢氧化物（Ａｌ－ＭｇＭＭＨ）溶胶粒子中Ｃｌ－和ＯＨ－的阴离子交换性能。在所研究的电解质ＮａＮＯ３，ＨＣＯＯＮａ，ＣＨ３ＣＯＯＮａ，Ｎａ２ＣＯ３，Ｎａ２ＳＯ４和Ｎａ３ＰＯ４中，发现高价阴离子的交换能力大于低价阴离子的交换能力，无机阴离子的交换能力大于有机阴离子的交换能力。所研究Ａｌ－ＭｇＭＭＨ溶胶粒子的阴离子交换容量为２．８２ｍｍｏｌ／ｇ，比粘土粒子的阳离子交换容量大得多。     

OPA柱前衍生反相高效液相色谱法测定氨基酸含量

建立了邻苯二甲醛（ＯＰＡ）手动柱前衍生反相高效液相色谱法测定样品中氨基酸含量的方法。以邻苯二甲醛（ＯＰＡ）／３－巯基丙酸（３－ＭＰＡ）为衍生试剂进行衍生,ＯＤＳ柱分离,３４０ｎｍ检测,在４０ｍｉｎ内１８种氨基酸全部得到基线分离。测定牛血清白蛋白（ＢＳＡ）的氨基酸组成和小鼠血清中的游离氨基酸,取得满意的结果。     

二维核磁共振波谱和分子力学方法计算香茶菜醛溶液中的…

采用二维核磁共振波谱完全归属了天然有机化合物香茶菜醛的＾１Ｈ和＾１３Ｃ ＮＭＲ化学位移，测定了部分质子的偶合常数，并用孤立自旋对近似方法质量处理香茶菜醛的相敏ＮＯＳＥＹ谱，根据１／γ＾６ｉｊ∝Ａｉｊ计算出相应的质子间距离。其溶液中的三维空间结构采用以ＮＭＲ结构参数为初始数据的ＷＵＰＨ计算程序和分子力学能量优化（ＭＭ２）完成计算。计算结果表明，得到的香茶菜醛在溶液中的三维空间结构反映了该化合物在溶液     

铁氰化钾-二氯荧光素-甲基多巴化学发光体系的研究

实验发现,铁氰化钾在碱性条件下能氧化甲基多巴产生微弱的化学发光,而二氯荧光素能大大增强该体系的发光强度。基于此,并结合流动注射技术,建立起一种直接测定甲基多巴的流动注射化学发光新方法。该方法的检出限为5.8×10-9g/mL,甲基多巴在1.0×10-8~1.0×10-6g/mL范围内与发光强度呈良好的线性关系。对1.0×10-7g/mL的甲基多巴平行测定11次,其相对标准偏差为2.9%。用该法对甲基多巴片剂含量进行了测定,结果令人满意。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.