Redox capacitance of poly-3,4-ethylenedioxythiophene studied by cyclic voltammetry and faradaic impedance spectroscopy

The paper presents results of studying the electrochemical properties of poly-3,4-ethylenedioxythiophene films using the methods of cyclic voltammetry and faradaic impedance spectroscopy in acetonitrile and propylene carbonate solutions of different electrolytes: LiClO₄, Bu₄NBF₄, Bu₄NPF₆. The effect of the film synthesis conditions, the nature of anion and solvent, and the supporting electrolyte concentration on the film redox capacitance is discussed. Main attention is paid to the comparison of values characterizing the redox capacitance of a poly-3,4-ethylenedioxythiophene film C _lf (determined using the faradaic impedance method) and C _cv (determined using the cyclic voltammetry method) and the studies of their dependence on the varied experimental factors. The experimental C _lf vs. E curves are analyzed using the relationships of a model of a uniform film.     

The thermodynamic properties of 5-vinyltetrazole and poly-5-vinyltetrazole over the temperature range from <Emphasis Type="Italic">T</Emphasis> → 0 to 350 K

The temperature dependences of the heat capacities of 5-vinyltetrazole and poly-5-vinyltetrazole were measured by adiabatic vacuum calorimetry over the temperature range 6-(350–370) K with errors of ～0.2%. The results were used to calculate the thermodynamic functions of the compounds, C _p ^° , H ^°(T) - H ^°(0), S ^°(T), and G ^°(T) - H ^°(0), over the temperature range from T → 0 to 350–370 K. The energy of combustion of 5-vinyltetrazole and poly-5-vinyltetrazole was measured in an isothermic-shell static bomb calorimeter. The standard enthalpies of combustion Δ _c H ^° and thermodynamic characteristics of formation Δ_f H ^°, Δ_f S ^°, and Δ_f G ^° at 298.15 K and p = 0.1 MPa were calculated. The results were used to determine the thermodynamic characteristics of polymerization of 5-vinyltetrazole over the temperature range from T → 0 to 350 K.     

Thermodynamic characteristics of complexation between Ho<Superscript>3+</Superscript> and ethylenediamine-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>'-disuccinic acid in aqueous solutions at 298.15 K

The thermodynamic characteristics of complexation between ethylenediamine-N,N'-disuccinic acid (H₄Y; EDDA) and Ho³⁺ ion were determined calorimetrically and potentiometrically at 298.15 K and ionic strengths of 0.1, 0.5, 1.0, and 1.5 (KNO₃). The logK, Δ_rG, Δ_rH, and Δ_rS values for the formation of HoY^– and HOHY complexes were calculated at the studied and zero ionic strength values. The changes in thermodynamic parameters of the reactions are discussed.     

EQCM study of redox properties of PEDOT/MnO<Subscript>2</Subscript> composite films in aqueous electrolytes

Electrochemical behavior of poly-3,4-ethylenedioxythiophene composites with manganese dioxide (PEDOT/MnO₂) has been investigated by cyclic voltammetry and electrochemical quartz crystal microbalance at various component ratios and in different electrolyte solutions. The electrochemical formation of PEDOT film on the electrode surface and PEDOT/MnO₂ composite film during the electrochemical deposition of manganese dioxide into the polymer matrix was gravimetrically monitored. The mass of manganese dioxide deposited into PEDOT at different time of electrodeposition and apparent molar mass values of species involved into mass transfer during redox cycling of PEDOT/MnO₂ composites were evaluated. It was found that during the redox cycling of PEDOT/MnO₂ composite films with various MnO₂ content, the oppositely directed fluxes of counterions (anions and cations) occur, resulting in a change of the slope of linear parts of the Δf–E plots with changing the mass fraction of MnO₂ in the composite film.Rectangular shape of cyclic voltammograms of PEDOT/MnO₂ composites with different loadings of manganese dioxide was observed, which is characteristic of the pseudocapacitive behavior of the composite material. Specific capacity values of PEDOT/MnO₂ composites obtained from cyclic voltammograms were about 169 F g^?1. The specific capacity, related to the contribution of manganese dioxide component, was about 240 F g^?1.     

Effect of donor and acceptor properties of solvents on the kinetics of photoreduction of sterically hindered <Emphasis Type="Italic">о</Emphasis>-benzoquinones

Effect of the solvent nature on the kinetics of photoreduction of 3,6-di-tert-butyl-1,2-benzoquinone and its six derivatives in the presence of N,N-dimethylaniline and 4-(N,N-dimethylamino)benzaldehyde has been investigated. It has been found that for the о-quinone—amine pair, for which the free energy change of electron transfer is ΔG_e > +0.11 eV, the rate constant of о-quinone photoreduction k_H decreases proportionally to the increase in the acceptor number of the solvent. For the о-quinone—amine pair with ΔG_e < +0.11 eV, the k_H value decreases proportionally to the increase in the donor number of the solvent. It has been established that the enhancement of the electron-acceptor properties of the solvent leads to the emergence of kinetic isotope effect for the reactant pairs of 3,6-di-tert-butyl-1,2-benzoquinone and 4,5-dimethoxy-3,6-di-tert-butyl-1,2-benzoquinone with N,N-di-methylaniline (ΔG_e = +0.11 and +0.22 eV, respectively).     

Thermodynamic properties and functions of condensed Bi<Subscript>8</Subscript>O<Subscript>11</Subscript>

The values of ΔH°₂₉₈, S°₂₉₈, H°₂₉₈–H°₀, T, ΔH _fus, and C _p(T), as well as the temperature dependences of the Gibbs energy function, are calculated for Bi₈O₁₁ oxide by proven computational methods.     

Viscosities and Surface Tensions of Phenetole with <Emphasis Type="Italic">N</Emphasis>-Methyl-2-pyrrolidone, <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethylformamide and Tetrahydrofuran Binary Systems at Three Temperatures

Viscosities, η, and surface tensions, σ, of binary systems of phenetole (ethoxy benzene or ethyl phenyl ether) with N-methyl-2-pyrrolidone, N,N-dimethylformamide or with tetrahydrofuran were measured over the entire mole fraction range and at (298, 303 and 308) K. The experimental data was used to compute the deviations in viscosity, Δη, and surface tension, Δσ. Values of the excess Gibbs energy of activation G*^E, surface entropy S _σ and surface enthalpy H _σ were calculated. Viscosity data of the binary systems were calculated using the Grunberg and Nissan and the three-body and four-body McAllister correlations. The Redlich–Kister method was used for evaluation of coefficients and standard deviations for Δη, Δσ and G*^E. The results were interpreted in terms of the probable effect of molecular interactions between components as well as polarity.     

Thermochemical study of the complex formation of copper(II) and nickel(II) iminodiacetates with amino acids in aqueous solutions

The formation of mixed-ligand complexes in the M(II)–Ida–L systems (M = Cu, Ni, L = His, Orn, Lys), where Ida is the iminodiacetic acid residue, was studied by pH-metry, calorimetry, and spectrophotometry. The thermodynamic parameters (logK, Δ_rG⁰, Δ_rH, Δ_rS) of formation of the complexes were determined at 298.15 K and the ionic strength I = 0.5 (KNO₃). The most probable mode of coordination of the chelating agent and the amino acid in the mixed-ligand complexes was elucidated.     

Mixed-Ligand Complexation of Zinc and Cobalt(II) Complexonates with Amino Acids in an Aqueous Solution

The formation of mixed-ligand complexes in the M(II)–Nta and Ida–L systems (M = Co, Zn; L = His, Orn, Lys, Gly, Im, en), where Ida and Nta are the residues of iminodiacetic and nitrilotriacetic acids, was studied by pH-metry, calorimetry, and NMR spectroscopy. The thermodynamic parameters (logK, Δ _r G⁰, Δ _r H, Δ _r S) of formation for these complexes were determined at 298.15 K and an ionic strength I = 0.5 (KNO3). The most probable pattern of coordination between a complexone and an amino acid in mixed-ligand complexes was revealed.     

Bis[1,3]thiazolo[4,5-<Emphasis Type="Italic">f</Emphasis>:5',4'-<Emphasis Type="Italic">h</Emphasis>]thieno[3,4-<Emphasis Type="Italic">b</Emphasis>]quinoxaline Derivatives as New Building Blocks of Polymers for Organic Electronics

New derivatives of bis[1,3]thiazolo[4,5-f:5',4'-h]thieno[3,4-b]quinoxaline containing the fused thiadiazoloquinoxaline moiety have been prepared. Monomer M1 shows strong light absorption within 600–800 nm due to intramolecular charge transfer. The optical bandgap E _g ^opt determined from the absorption edge in a film is 1.44 eV. The HOMO and LUMO levels are–5.44 and–3.12 eV, respectively. The new structural fragment has a rather low frontier molecular orbital energies and a small bandgap; therefore, it is a promising building block for the synthesis of polymers for organic electronics.     

Synthesis,crystal structure,and kinetics of thermal decomposition of the Zn(II) complex with vanillin

A complex [Zn(C₈H₇O₃)₂(H₂O)₂] (C₈H₈O₃ is vanillin) has been synthesized and characterized by IR, elemental analysis, and X-ray diffraction single-crystal analysis. The crystals are monoclinic, space group C2/c, a = 22.236(8) Å, b = 10.594(2) Å, c = 7.8190(16) Å, α = 89.90(3)°, β = 106.87(4)°, γ = 89.99(3)°, V = 1762.6(8) ų, Z = 4, F(000) = 832, S = 1.079, ρ _c = 1.521g cm^?3, R = 0.0221, R _w = 0.0604, μ = 1.433 mm^?1. The Zn²⁺ ion is six-coordinated with a distorted octahedron geometry. The complex forms a three-dimensional network through intermolecular hydrogen bonds. The thermal decomposition kinetics of the complex for the second stage was studied under non-isothermal conditions by the TG and DTG methods. The kinetic equation can be expressed as dα/dt = Ae^?E/RT 2(1 ? α)[1 ? ln(1 ? α)]^1/2. The kinetic parameters (E, A), activation entropy ΔS ^≠, and activation free-energy ΔG ^≠ were also gained.     

Thermodynamic characteristics of the formation of complexes of nickel(II) with L-homoserine

The formation of complexes of nickel(II) with L-homoserine at 298.15 K and ionic strengths I = 0.5, 1.0, and 1.5 (KNO₃) are investigated by potentiometry and calorimetry. Standard characteristics of studied equilibria (log K°, Δ_rG°, Δ_rH°, and Δ_rS°) are determined.     

Adsorption equilibrium at the metal-oxide film interface in the oxidation reactions of Ni,Cr, and their alloys

An adsorption thermodynamic model of the oxidation of Ni-Cr alloys is proposed. According to this model, the adsorption of the alloy component with a lower surface energy (Ni) at the alloy-oxide film interface shifts the equilibrium of the solid-phase reaction 3NiO + 2Cr = Cr₂O₃ + 3Ni (1) toward the enrichment of the oxide film in NiO. It was demonstrated that the total Gibbs energy change for reaction (1) can be presented as ΔG _{T, S} = ΔG _T + ΔG _S, where ΔG _T < 0 is the contribution from the Gibbs energy of the thermochemical reaction of oxidation of Ni and Cr atoms and ΔG _S > 0 is the contribution from the surface Gibbs energy of formation of the alloy associated with the replenishment of the surface layer of the alloy during its oxidation. Calculations of ΔG _S are based on the published data on the surface energy of the pure metal ΔG _S ^o and results of authors’ theoretical studies. It was found that the dependence of \({{a_{NiO}^3 } \mathord{\left/ {\vphantom {{a_{NiO}^3 } {a_{Cr_2 O_3 } }}} \right. \kern-\nulldelimiterspace} {a_{Cr_2 O_3 } }}\) on the content of Cr in the alloy determined from calculated equilibrium characteristic of reaction (1) at 1373 K proved to be in satisfactory agreement with the available experimental data on the composition of the oxide film on Ni-Cr alloys. In addition, the values of the potentials of metal-oxide Ni and Cr electrodes in an aqueous solution at 298 K are calculated, which nearly coincide with the published values of the Flade potential for the passivation of these metals.     

Thermodynamic Parameters of the Complex Formation of Copper(II) Ions with L-Serine and L-Homoserine

Complex formation of copper(II) ions with L-serine and L-homoserine at 298.15 K and ionic strength I 0.5, 1.0, and 1.5 (KNO₃) has been studied by means of potentiometry and calorimetry. Standard thermodynamic parameters (log K⁰, Δ_rG⁰, Δ_rH⁰, Δ_rS⁰) of the studied coordination equilibriums have been calculated.     

Micromechanism of Cu and Fe alloying process on the martensitic phase transformation of NiTi-based alloys: First-principles calculation

Using first-principles pseudo-potential plane wave method, the formation enthalpy ΔH, binding energy ΔE, elastic constants, and electronic structure were calculated and analyzed carefully for NiTiX (X = Cu, Fe) shape memory alloy. The results show that the Cu or Fe element prefers to occupy the Ni site in the NiTi matrix phase respectively. Compared with the NiTi matrix phase, the ΔH, ΔE, c ₄₄ and c′ of NiTi (Cu) are similar to each other. However, the structural stability of the NiTi phase is improved obviously by the Fe alloying process. Simultaneously, the shear modulus c ₄₄ and c′ of NiTi (Fe) are larger than those of the NiTi matrix phase. Furthermore, Milliken population results indicate that Q _Cu–Ti is smaller than Q _Ni–Ti after the Cu alloying process, but Q _Fe–Ti is larger than Q _Ni–Ti. The electron density difference shows that some covalent bonding exists between Fe and Ti elements. Based on the upward analysis, the difference in the phase stability and elastic constants of NiTiX (X = Cu, Fe) is the substantial mechanism for the different M _s of NiTiX (X = Cu, Fe) although Cu or Fe substitutes for the same atom Ni elements in the NiTi matrix phase.     

Stability of 3<Emphasis Type="Italic">d</Emphasis>-element cyclotetraphosphates in water

The hydrolysis kinetics of the anion in 3d-element cyclotetraphosphates is considered. The thermodynamic functions of formation (Δ _f H ⁰, Δ _f G ⁰, and Δ _f ? _at ⁰ ) of the cyclotetraphosphates are calculated using the ion increment method. A linear correlation is established between and log K Δ _f ? _at ⁰ for these compounds.     

Evaporation of Plasticizer from NEPE Type Propellant

Using the method of dynamic thermogravimetry and differential scanning calorimetry in the heating rate range 0.46–10.0 deg^–1 min^–1, evaporation of the plasticizer from propellant samples of the NEPE type was investigated. The experiments were carried out in an open system in a flow of pure argon at atmospheric pressure. Nitroglycerin is the main mass fraction of the plasticizer. The activation energy E of the gross evaporation–diffusion process is determined by various methods. Heat of evaporation of the plasticizer ΔH_v is estimated. It is shown that in the early stage of evaporation the values of E and ΔH_v practically coincide. At a temperature of 298.15 K ΔH_v = 89 ± 4 kJ mol^–1, which is in satisfactory agreement with the literature data for heat of evaporation of pure nitroglycerin. With any way of preventing free removal of the plasticizer from the surface of the samples on the DSC thermograms successive exothermic peaks of the thermal decomposition of the plasticizer and the octogen are observed, which are not realized in the open system for the indicated heating rates at T < 190°C.     

A comparison of energy changes accompanying growth processes by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Calculations are made using the equations Δ_r G = Δ_r H ? TΔ_r S and Δ_r X = Δ_r H ? Δ_r Q where Δ_r X represents the free energy change when the exchange of absorbed thermal energy with the environment is represented by Δ_r Q. The symbol Q has traditionally represented absorbed heat. However, here it is used specifically to represent the enthalpy listed in tabulations of thermodynamic properties as (H _T  ? H ₀) at T = 298.15 K, the reason being that for a given substance TS equals 2.0 Q for solid substances, with the difference being greater for liquids, and especially gases. Since Δ_r H can be measured, and is tangibly the same no matter what thermodynamics are used to describe a reaction equation, a change in the absorbed heat of a biochemical growth process system as represented by either Δ_r Q or TΔ_r S would be expected to result in a different calculated value for the free energy change. Calculations of changes in thermodynamic properties are made which accompany anabolism; the formation of anabolic, organic by-products; catabolism; metabolism; and their respective non-conservative reactions; for the growth of Saccharomyces cerevisiae using four growth process systems. The result is that there is only about a 1% difference in the average quantity of free energy conserved during growth using either Eq. 1 or 2. This is because although values of TΔ_r S and Δ_r Q can be markedly different when compared to one another, these differences are small when compared to the value for Δ_r G or Δ_r X.     

Thermodynamic characteristics of protolytic equilibria in aqueous solutions of glycyl peptides

Protolytic equilibria in aqueous solutions of glycyl-DL-serine, glycyl-DL-threonine, and glycyl-DL-valine are investigated by means of potentiometry and calorimetry. Dissociation constants and heat effects of the above dipeptides are determined. Standard thermodynamic characteristics (pK°, Δ_disG°, Δ_disH°, Δ_disS°) of the investigated equilibria are calculated. The obtained results are compared to corresponding data on relative compounds.