Ternary ion-association complexes between the indium(III) - 4-(2-pyridylazo)resorcinol anionic chelate and some tetrazolium cations

Complex formation and liquid-liquid extraction were studied in systems containing indium(III), 4-(2-pyridylazo)resorcinol (PAR), tetrazolium salt (TZS), water and chloroform. Two different TZS were used: 2,3,5-triphenyl-2H-tetrazolium chloride (TTC) and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT). The optimum conditions for extraction of In(III) as a ternary complex, (TT⁺)[In(PAR)₂] or (MTT⁺)[In(PAR)₂], were found: pH, extraction time, concentration of PAR and concentration of TZS. The constants of extraction (K_ex), constants of association (β), constants of distribution (K_D) and recovery factors (R%) were determined. The apparent molar absorptivities in chloroform were calculated to be ɛ′₅₂₀=6.6×10⁴ L mol⁻¹ cm⁻¹ and ɛ′₅₁₅=7.1×10⁴ L mol⁻¹ cm⁻¹ for the systems with TTC (I) and MTT (II), respectively. Beer’s law was obeyed for In(III) concentrations up to 3.4 μg mL⁻¹ in both the cases. The limits of detection (LOD=0.07 μg mL⁻¹ I and LOD=0.12 μg mL⁻¹ II), limits of quantification (LOQ=0.24 μg mL⁻¹ I and LOQ=0.41 μg mL⁻¹ II) and Sandell’s sensitivities (SS) were estimated as well.      

Photometric determination of aqueous cobalt (II), nickel (II), copper (II) and iron (III) with 1-nitroso-2-naphthol-3,6-disulfonic acid disodium salt in gelatin films

Photometric determination of aqueous Co(II), Cu(II), Ni(II) and Fe(III) was performed using indicator films prepared by immobilization of 1-nitroso-2-naphthol-3,6-disulfonic acid disodium salt (NRS) into hardened photographic film. Immobilization was based on electrostatic interaction of reagent and metal complexes with the gelatin. The isoelectric point pH of hardened gelatin (4.46±0.04) was evaluated by viscometry. Co(II), Fe(III), Ni(II) form 1:3 complexes with NRS in gelatin at pH 2 and Cu(II) forms 1:2 complexes. Their log β′ values were: Co-6.7, Fe-8.6, Cu-8.0, and Ni-6.4. The absorption maxima were: 370nm for NRS, and 430nm, 470nm, 495nm and 720nm for complexes of Co(II), Ni(II), Cu(II) and Fe(III). An algorithm for their simultaneous determination using the indicator films was developed. The detection limits were: c_lim(Co²⁺) = 0.45×10⁻⁵ M, c_lim(Fe³⁺) = 0.50×10⁻⁵ M, c_lim(Cu²⁺) = 0.67×10⁻⁵ M, c_lim(Ni²⁺) = 0.75×10⁻⁵ M,; and their sum c_lim(ΣMn⁺) = 0.82×10⁻⁵ M.      

Determination of submillimolar concentration of ferrate(VI) in alkaline solutions by amperometric titration

A new amperometric titration method was developed for quantitative determination of ferrate(VI) (Fe^VIO₄ ²⁻) in the 7.06×10⁻⁵−5.73×10⁻³ M concentration range. Chromium(III) hydroxide solution was used as the titrant. The diffusion current (Id) had a linear relationship with the concentration of ferrate(VI) and slopes were dependent on the concentration of NaOH. The amperometric titration could detect a lower concentration of ferrate(VI) than could potentiometric and colorimetric titrations. The method was applied successfully to determine concentrations of ferrate(VI), generated electrochemically, in strong alkaline solutions.      

Methyl- and methoxysalicylatocopper complexes with 2-pyridylmethanol: Synthesis,spectral properties,structure and EPR characterization in solid-state and in solution

The syntheses and characterizations of salicylatocopper(II) complexes of the formula Cu(X-sal)₂(2-pyme)₂ (X = 3-MeO (1), 4-MeO (2), 3-Me (3), 4-Me (4) and 5-Me (5), where 3-MeOsal⁻ = 3-methoxysalicylate, 4-MeOsal⁻ = 4-methoxysalicylate, 3-Mesal⁻ = 3-methylsalicylate, 4-Mesal⁻ = 4-methylsalicylate, 5-Mesal⁻ = 5-methylsalicylate anion, and 2-pyme = 2-pyridylmethanol) are reported. The composition was determined by elemental analysis, and ligand coordination modes have been determined by spectroscopic methods (IR, UV-VIS). The crystal structure determination of [Cu(3-MeOsal)₂(2-pyme)₂] (1) and [Cu(5-Mesal)₂(2-pyme)₂] (5) have confirmed conclusions originally based on spectral data. EPR measurements of frozen water/methanol solutions containing different copper(II): 2-pyme molar ratios have indicated presence of complexes with only two nitrogen donor atoms bonded to each central atom.      

Dispersive liquid-liquid microextraction and liquid chromatographic determination of pentachlorophenol in water

A simple and sensitive dispersive liquid-liquid microextraction method for extraction and preconcentration of pentachlorophenol (PCP) in water samples is presented. After adjusting the sample pH to 3, extraction was performed in the presence of 1% W/V sodium chloride by injecting 1 mL acetone as disperser solvent containing 15 μL tetrachloroethylene as extraction solvent. The proposed DLLME method was followed by HPLC-DAD for determination of PCP. It has good linearity (0.994) with wide linear dynamic range (0.1–1000 μg L⁻¹) and low detection limit (0.03 μg L⁻¹), which makes it suitable for determination of PCP in water samples.      

Synthesis,characterization, catalytic and antimicrobial studies of ruthenium(III) complexes

Ru(III) complexes of the type [RuXB(L)2] have been prepared by the reaction of 3,4-dihydropyrimidin-2(1H)-ones/thiones (HL¹–HL⁴) with the precursors of the type [RuX₃B₃] where X=Cl or Br; B=PPh₃ or AsPh₃ and L is the deprotonated ligand. The synthesized complexes were characterized by physico-chemical methods, electrochemical and magnetic moment data. The catalytic efficiency of the complexes were examined in the oxidation of alcohols and antimicrobial studies were also carried out.      

Preliminary results of a quick,simple method of detecting antimony in water samples

Preliminary results of development of a direct and fast method of determination of antimony in samples of tap water using GFAAS are presented. The found levels of antimony were lower than permitted for human consumption. A mixture of Pd and Mg(NO₃)₂ (concentrations in the injected solution: 8.6 μg mL⁻¹ and 5.8 μg mL⁻¹ respectively) was used as the chemical modifier. The pyrolysis and atomization temperatures were 1000 and 1700°C, respectively and the mean analytical recovery 98.2%.      

Preparation of SAMS-CMC-CS bipolar membrane and its application in electro-generating FeO 4 2−

The preparation of SAMS-CMC-CS bipolar membrane grafted onto CMC by SAMS was reported. The cross-section view of SAMS-CMC-CS BM were studied by SEM. FT-IR spectrum indicated that SAMS-CMC-CS BM contained-SO ₃ ⁻ ,-COO⁻ and −N=CHR functional groups. Compared with CMC-CS BM, SAMS-CMC-CS BM appears to have better mechanical strength and chemical stability in alkali solution at [OH⁻]≥9.5 mol/L, with a swelling of 55 %. The electrochemical properties of SAMS-CMC-CS BM were also studied. SAMS-CS-CMC BM not only effectively prevented FeO ₄ ²⁻ from diffusing into the cathode chamber, but also played an important role in the supply of OH⁻ consumed during the electro-generated FeO ₄ ²⁻ process.      

The solubility of Ca(OH)<Subscript>2</Subscript> in extremely concentrated NaOH solutions at 25°C

The solubility of Ca(OH)₂ in aqueous NaOH solutions up to 12.50 M at 25°C has been determined. The solubility data obtained for NaOH concentrations lower than 3 M was compared with those published in the literature. The solubility of Ca(OH)₂ steadily decreases with the increasing NaOH concentration. The solubility data obtained at a constant ionic strength (I = 1 M Na(Cl,OH)) enabled the determination of the conditional solubility product of Ca(OH)₂(s) (lgL_Ca(OH)2 = − 4.10 ± 0.02). Formation of the hydroxo complex CaOH⁺(aq) was invoked to describe the variation of [Ca²⁺]_T with [OH⁻]_T. Its conditional stability constant was found to be lgK_CaOH+ = 0.97 ± 0.02. The experimental protocol employed was proven to be suitable for accurate solubility determinations in rapidly equilibrating systems comprising of highly concentrated, alkaline solutions and containing analytes in the ppm range.      

Influence of EDTA,carboxylic acids,amino- and hydroxocarboxylic acids and monosaccharides on the generation of arsines in hydride generation atomic absorption spectrometry

The influence of EDTA, carboxylic acids, amino-and hydroxocarboxylic acids, monosaccharides and humic substances on the generation of arsines in hydride generation atomic absorption spectrometry (HGAAS) was investigated. EDTA (0.02 mol L⁻¹), ascorbic acid (0.02 mol L⁻¹) and glucose or fructose (0.2 mol L⁻¹) are useful additives for levelling sensitivities for As(III), monomethylarsonate (MMA) and dimethylarsinate (DMA). The presence of glycine, malonic, tartaric acids, BICIN and soil humin extracts leads to differences in analytical signal response between these arsenic species. An analytical application to the determination of the sum of As(III), monomethylarsonate (MMA) and dimethylarsinate (DMA) as well as the sum of toxicologically relevant hydride forming arsenic fraction As(III) + As(V) + MMA + DMA in EDTA soil/sediment extracts using continuous flow HGAAS was demonstrated. The limit of detection was 0.2 mg kg⁻¹ As. Within-day and between-day precision were in the range 3–7% and 4–10%, respectively, for arsenic contents of 0.7–25 mg kg⁻¹, with recoveries 95–103%.      

Determination of ultra-trace amounts of inorganic selenium species in natural water by ion chromatography-inductively coupled plasma-mass spectrometry coupled with nano-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> solid phase extraction

This work presents a nano-Al₂O₃ solid phase extraction technique for the determination of ultra-trace amounts of inorganic selenium species in aqueous systems using ion chromatography inductively coupled plasma-mass spectrometry (IC-ICP-MS). In this experiment, the inorganic selenium species were successfully extracted on a nano-Al₂O₃ solid phase column and then quantitative eluted with a 100 mmol L⁻¹ NaOH solution. Extraction conditions such as solvent identity, solvent concentration, solvent volume, solvent pH and salt addition were optimized. Under the optimum extraction conditions (elute solvent: 100 mmol L⁻¹ NaOH, solvent volume: 4 mL, pH: 7.0), low detection limits (Se (IV): 6 ng L⁻¹, Se (VI): 11 ng L⁻¹; RSD<5.0%) and good linear range (0.5–100 ng mL⁻¹, R² > 0.999) were obtained for all of the analytes. Good spiked recoveries over the range of 80–98% were obtained by applying the proposed method on real environmental water samples. These results indicated that this method is very sensitive and reliable when monitoring trace levels of inorganic selenium species in aqueous samples.      

A new zinc complex of 1-propyl-1H-benzo[d] imidazole: synthesis, characterization and electrocatalysis

The present work reports the synthesis, characterization and performance of a new zinc(II) complex of [Zn(C₃H₇-bim)₂Br₂] (bim = benzimidazole) as electrocatalyst for trichloroacetic acid and bromate reduction. Its structure was characterized by X-ray crystallography, IR spectroscopy and elemental analysis. The zinc atom adopts a distorted tetrahedral geometry by coordinating to two bromine atoms and two nitrogen atoms from two 1-propyl-1H-benzo[d]imidazole ligands. The electrochemical behavior and electrocatalysis of the zinc complex bulk-modified carbon paste electrode (Zn-CPE) have been studied by cyclic voltammetry. The Zn-CPE shows good electrocatalytic activities toward the reduction of trichloroacetic acid and bromate. The detection limit and the sensitivity are 0.05 μM, 67.43 μA μM⁻¹ for trichloroacetic acid detection, and 0.02 μM, 69.94 μA μM⁻¹ for bromate detection, respectively. This modified electrode shows good reproducibility, high stability, low detection limit, technical simplicity and possibility of rapid preparation, which is important for practical applications.      

Voltammetric and potentiometric studies of some sulpha drug-Schiff base compounds and their metal complexes

The electrochemical behavior of some sulpha drug-Schiff bases at a mercury electrode was examined in the Britton-Robinson universal buffer of various pH values (2.5–11.7) containing 20% v/v) of ethanol using DC-polarography, cyclic voltammetry and controlled-potential electrolysis. The DC-polarograms and cyclic voltammograms of the examined compounds exhibited a single, 2-electron, irreversible, diffusion-controlled cathodic step within the entire pH range which is attributed to the reduction of the azomethine group-CH=N- to -CH₂-NH-. The symmetry transfer coefficient (α) of the electrode reaction and the diffusion coefficient (D ₀) of the reactant species were determined. The electrode reaction pathway of the compounds at the mercury electrode was suggested to follow the sequence: H⁺, e⁻, e⁻, H⁺. The dissociation constant of the sulpha drug-Schiff bases, the stability constant and stoichiometry of their complexes with various divalent transition metal ions (Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺) were determined potentiometrically at room temperature.      

Preparation and crystal structure of bis[(dibenzo-18-crown-6)potassium]bis(μ<Subscript>2</Subscript>-chloro)-tetrachlorodicuprate(II)

A new complex compound bis[(dibenzo-18-crown-6)potassium]bis(μ₂-chloro)-tetrachlorodicuprate( II), {[K(Db18c6)]₂Cu₂Cl₆} (I) was prepared and its crystal structure was investigated by XRD analysis. Complex molecule I consist of anion [Cu₂Cl₆]²⁻ located in a crystallographic center of inversion, and two centrosymmetrical to each other complex cations [K(Db18c6)]⁺ of “guest-host” type: the cation K⁺ is located in the cavity of the crown-ligand Db18c6 and is coordinated by all its six O atoms, and also by one Cl atom of anion [Cu₂Cl₆]²⁻. The coordination of this cation K⁺ is enlarged up to hexagonal-bipyramidal due to the formation of unusual coordination bond K⁺ → π(      

Ionic liquid promoted Diels-Alder Reaction between anthrone and maleimides

Ionic liquids (IL) are gaining importance as green solvents. Imidazolium ionic liquid [bmim]⁺[Cl]⁻, an environmentally benign solvent, was found to promote the Diels-Alder reaction between anthrone and maleimides at room temperature with excellent yields. The ionic liquid played a dual role as solvent and catalyst.      

Spatial trends of petroleum hydrocarbons in water and sediments

Seasonal changes in petroleum hydrocarbons in water and streambed sediment from selected oil-related areas of Ondo State, Nigeria have been examined using gravimetric and infrared methods. The highest and lowest total petroleum hydrocarbon concentrations (TPH) in water (sediments in brackets) gravimetrically were 3.49 mg L⁻¹ (199.3) mg kg⁻¹ and 0.003 mg L⁻¹ (81.0) mg kg⁻¹ while the concentrations found by IR were 24.0 mg L⁻¹ (135.0 mg kg⁻¹) and 14.0 mg L⁻¹ (33.0 mg kg⁻¹) respectively. The two seasons were positively correlated (α = 0.01) by both methods. The TPH level was well correlated with the sediment organic carbon (OC) during both seasons. The characteristic carbonyl (C=O) vibrations at 1650 cm⁻¹ and 1700 cm⁻¹ indicate oxidation of the oil residue. The study recommends further investigation into the type of organics present to evaluate their toxicity and appropriate remediation.      

Determination of europium by using the chemical oscillating system of Ce(IV)-KBrO<Subscript>3</Subscript>-acetone-oxalic acid-H<Subscript>2</Subscript>SO<Subscript>4</Subscript>

A sensitive and convenient method for the determination of trace europium ions using an oscillating chemical reaction involving Ce(IV) - KBrO₃ - acetone - oxalic acid - H₂SO₄ was proposed. The results indicated that the changes in oscillating period (T) was linearly proportional to the negative logarithmic concentration of Eu³⁺ (-log C) in the range of 1.41 × 10⁻⁸ ˜ 1.41 × 10⁻⁴ mol L⁻¹ (r = 0.9982) with a detection limit of 1.04 × 10⁻⁹ mol L⁻¹. The recoveries were limited to the range of 99.5% to 100.8%. Under the same conditions, other rare earth ions did not interfere with the determination of Eu³⁺. In addition, a perturbation mechanism was also discussed briefly.      

Hollow fibre liquid phase microextraction of parabens

A hollow fibre liquid phase microextraction for gas chromatographic determination of some p-hydroxybenzoic acid esters has been developed. Chlorobenzene containing tetradecane as internal standard was used for the extraction. Optimized extraction was carried out at room temperature for 40 min in the presence of 0.4 g mL⁻¹ NaCl in the sample solution. Calibration was linear up to 30 mg L⁻¹. Correlation coefficients were 0.996–0.998. Enrichment factors were 21, 95 and 154, and detection limits were 0.20, 0.03 and 0.01 μg mL⁻¹ for methylparaben, ethylparaben and propylparaben, respectively. Reproducibility was acceptable with relative standard deviations up to 11.7%. The technique was tested for water and urine analysis.      

Properties of ibuprofen ion-selective electrodes based on the ion pair complex of tetraoctylammonium cation

Ibuprofen membrane electrodes based on different plasticizers: diisobutyl phthalate (DIBP), o-nitrophenyloctyl ether (o-NPOE), dioctyl sebacate (DOS) and tetraoctylammonium 2-(4-isobutylphenyl)propionate were prepared. All electrodes show: a near Nernstian slope of characteristic (58.3–60.9 mV decade⁻¹) in the measurement range (10⁻⁴–10⁻¹ mol L⁻¹), limit of detection (5.0×10⁻⁵ mol L⁻¹), really long lifetime (12 months), dependence of the electrode potential on pH (5.5–9.0), reproducibility of potential (0.6–1.2 mV) and selectivity coefficients in relation to some organic and inorganic anions. The electrodes were applied for the determination of ibuprofen in tablets by the calibration curve method and the standard addition method.      

Kinetics of base hydrolysis of α-amino acid esters catalyzed by palladium(II) piperazine complex

The kinetics of base hydrolysis of glycine, histidine, and methionine methyl esters in the presence of [Pd(pip)(H₂O)₂]²⁺ complex, where pip is piperazine, is studied in aqueous solutions, at T = 25°C, and I = 0.1 mol dm⁻³. The rate of ester hydrolysis for glycine methyl ester is studied at different temperature and dioxane/water solutions of different compositions. The kinetic data are fit under the assumption that the hydrolysis proceeds in one step. The activation parameters for the base hydrolysis of the complexes are evaluated