Recent progress for capillary electrophoresis with electrochemical detection

Capillary electrophoresis (CE) is an attractive technique in separation science because of its high separation performance, short analysis time and low cost. Electrochemical detection (EC) is a powerful tool for CE because of its high sensitivity. In this review, developments of CE-EC from 2008 to August, 2011 are reviewed. We choose papers of innovative and novel results to demonstrate the newest and most important progress in CE-EC.      

Diironcarbonyl-coumarin complex: preparation, intramolecular electron transfer, and electro-generation of hydrogen

A new organometallic complex coupling photoactive coumarin to a diironhexacarbonyl unit has been successfully prepared and its composition and electronic structure confirmed by elemental and spectroscopic analyses. Emission spectral analysis of the complex reveals photoinduced intramolecular electron transfer from coumarin to the iron-carbonyl moiety. The compound is electrochemically reduced at −1.24 V vs. Fc/Fc⁺. This reduction is irreversible, attesting to the instability of the complex. Electrochemical evolution of hydrogen in the presence of the complex has been studied and results are discussed.      

Chiral enantiopure bis(thio)ureas derived from TADDOL and their carboxylate complexation capacity

New chiral enantiopure ureas and thioureas with (R,R)-TADDOL backbone were synthesized. Bis-(thio)ureas with C2 symmetry were obtained from TADDOL iso(thio)cyanates and bifunctional amino-(thio)ureas from TADDAMINE, respectively. These were tested for carboxylate recognition capacity and the association constant was determined for the most stable complex.      

Removal of lead(II) from aqueous solution with amino-functionalized nanoscale zero-valent iron

An effective adsorbent for removal of Pb(II) in aqueous solution was synthesized by reaction of nanoscale zero-valent iron (NZVI) and 3-aminopropyltriethoxysilane (APS). The material was characterized using transmission electron microscopy (TEM), infrared spectroscopy (IR) and a thermogravimetric analyzer (TGA). The amino-coated NZVI rapidly removed Pb(II) from aqueous solution and was easily separated by an external magnetic field. The Freundlich equation was used for investigating the adsorption process of APS-NZVI. Compared to untreated NZVI, the APS-coated NZVI exhibited stronger adsorption affinity and better adsorption performance. Therefore, APS-NZVI may be a suitable material for heavy metal remediation and has potential industrial applications.      

Preparation and examination of multilayer graphene nanosheets by exfoliation of graphite in high efficient attritor mill

Graphene multilayers have been prepared by mechanical method based on milling graphite in high efficient attritor mill. The results showed that the best dispersion media is ethanol, and 10 hours of intensive milling proved to be the most efficient way to separate the graphite layers as it was shown by scanning electron microscopy and X-ray diffraction measurements.      

Synthesis of fluorescent carboxylic acid ligands for construction of monolayers on nanostructures

Two new long-chain carboxylic acids (1, 2) bearing strong fluorescent group pyrene as ligands for Self-Assembled Monolayers (SAMs) have been synthesized. The multistep targeted synthesis is accomplished by use of Pyren-1-yl methylamine hydrochloride and employing simplified synthetic protocols. Compound 2 contains a chiral center purposely introduced along the atom chain in order to make it suitable for chiro-optical studies of the resulting SAMs.      

Hydrophilic interaction chromatography in drug analysis

Hydrophilic interaction chromatography (HILIC) is an increasingly popular alternative to conventional HPLC for drug analysis. It offers increased selectivity and sensitivity, and improved efficiency when quantifying drugs and related compounds in complex matrices such as biological and environmental samples, pharmaceutical formulations, food, and animal feed. In this review we summarize HILIC methods recently developed for drug analysis (2006–2011). In addition, a list of important applications is provided, including experimental conditions and a brief summary of results. The references provide a comprehensive overview of current HILIC applications in drug analysis.      

A green chemical route for the synthesis of Mn3O4 nanoparticles

A novel environmental friendly, room temperature route using an ionic liquid 1-n-butyl-3-methylimidazolium hydroxide ([BMIM]OH) for the synthesis of Mn₃O₄ nanoparticles is presented. The product was characterized using Fourier transform infrared spectroscopy, X-ray powder diffraction, and transmission electron microscopy. Phase purity was confirmed by XRD, and X-ray line profile fitting determined a crystallite size of 42 ± 11 nm. TEM analysis revealed various morphologies. EPR measurements have indicated the existence of long-range interactions, due to the wide range of particle sizes and morphologies observed.      

Amino acid and vitamin determinations by TLC/HPTLC: review of the current state

Several methods to determine amino acids and vitamins in biological and pharmaceutical samples have been reported. Thin layer chromatography (TLC) finds its place when the relatively costly equipment required by other methods is unavailable. This review covers the 1991–2010 literature on TLC/HPTLC (high performance thin layer chromatography) amino acid and vitamin determinations. It gives an overview of the special features as well as the problems in TLC/HPTLC determinations of amino acids and vitamins. Various chromatographic systems useful in amino acid and vitamin identification, separation and quantitation of are presented in tabular form. Future prospects of TLC/HPTLC for amino acid and vitamin determinations are also discussed.      

Impact of un-polymerized acrylamide monomer residues onto protein identification by MALDI TOF MS

Polyacrylamide gel electrophoresis is a powerful tool for protein mixture separation frequently used in proteomic studies. This article describes the problems which can arise during the identification process of separated proteins by matrix assisted laser desorption/ionization mass spectrometry. Presence of residual acrylamide monomers in the peptide samples leads to a significant peptide signal suppression. In the case of protein prohibitin, isolated from the MCF 7 breast cancer cell line, the peptide signal suppression was observed in 50% of all detected peptides.      

Characterization of calcium carbonates used in wet flue gas desulphurization processes

This paper presents an experimental characterization of two sources of calcium carbonate, limestone and calcium carbonate precipitate (CCP) used in wet flue gas desulphurization processes. Characterization of the two carbonate sources was carried out by chemical analysis, IR spectra, thermal behavior, particle size distribution for CCP, BET surface area and absorption capacity of SO₂ in calcium carbonate suspensions. The absorption temperature, suspension concentration and carbonate grain size were found to be the most influential parameters in the absorption capacity measurements.      

<Emphasis Type="Italic">N</Emphasis>-Alkylation of benzimidazoles with ketonic Mannich bases and the reduction of the resulting 1-(3-oxopropyl)benzimidazoles

Benzimidazole, benzimidazoles diversely substituted at position 2, and 5,6-dimethylbenzimidazole have been alkylated at N ¹ with ketonic Mannich bases derived from acetophenones, acetylnaphthalenes, 2-acetylthiophene and 1-tetralone to afford a series of novel 1-(3-oxopropyl)benzimidazoles. The reduction of these transamination products with NaBH₄ in methanol produced the corresponding 1-(3-hydroxypropyl)benzimidazoles in excellent yields.      

Ugi products containing boronate esters

The Ugi reaction with formylphenylboronic acid derivatives as the carbonyl component proceeds to give the corresponding boron-containing dipeptide derivatives (Ugi products) in good yields.      

Preparation of a series of N-alkyl-3-boronopyridinium halides and study of their stability in the presence of hydrogen peroxide

A simple and efficient protocol for the preparation of a series of N-alkyl-3-boronopyridinium salts is described which requires exposure of 3-pyridineboronic acid neopentylglycol ester and corresponding alkyle halide to microwave irradiation followed by boronic ester hydrolysis. The technique employed drastically reduces the reaction time and prevents thermal degradation and the formation of side products. Water solutions of the obtained boronopyridinium salts are shown to be stable at room temperature in wide pH range as well as in the presence of hydrogen peroxide at pH 10.0 for 72 h.      

Unusual reaction of 3,4-bis(3-nitrofurazan-4-yl)furoxan with ammonia,primary amines and hydrazine

The nucleophilic displacement of two nitro groups in 3,4-bis(3-nitrofurazan-4-yl)furoxan with ammonia, primary aliphatic amines and hydrazine leads to formation of a novel heterocyclic system, 7H-tris[1,2,5]oxadiazolo[3,4-b:3′,4′-d:3″,4″-f]azepine. The reaction of compound 1 with secondary aliphatic amines proceeds in a typical way for nitrofurazans when the nitro-group in the starting compound is substituted by RR’N-group.      

ZnO-beta zeolite mediated simple and efficient method for the one-pot synthesis of quinoxaline derivatives at room temperature

A rapid and an efficient one-pot method for the synthesis of quinoxalines catalysed by ZnO-beta zeolite at room temperature is described. This environmentally benign method provides several advantages over methods that are currently employed such as a simple work-up, mild reaction conditions, good to excellent yields, and a process to recover and reuse the catalyst for several cycles with consistent activity.      

Carbon nanotubes in capillary electrophoresis, capillary electrochromatography and microchip electrophoresis

Carbon nanotubes are among the plethora of novel nanostructures developed since the 1980s. Nanotubes have attracted considerable interest by the scientific community thanks to their extraordinary physical and chemical properties. Research areas have flourished in recent years and now include the nano-electronic, (bio)sensor and analytical field along with many others. This review covers applications of carbon nanotubes in capillary electrophoresis, capillary electrochromatography and microchip electrophoresis. First, carbon nanotubes and a range of electrophoretic techniques are briefly introduced and key references are mentioned. Next, a comprehensive survey of achievements in the field is presented and critically assessed. The merits and downsides of carbon nanotube addition to the various capillary electrophoretic modes are addressed. The different schemes for fabricating electrochromatographic stationary phases based on carbon nanotubes are discussed. Finally, some future perspectives are offered.      

A direct method for the decontamination of a fly ash amended wet soil,artificially polluted with dioxins

We report hereby the first method of direct treatment of a wet soil containing toxic polychloroderivatives. Using a system with metallic Ca and 5% Rh fixed on charcoal in methanol, soil samples artificially polluted with fly ash containing polychloro-dibenzodioxins (PCDDs), polychloro-dibenzofurans (PCDFs) and coplanar polychlorinated biphenyls (co-PCBs), and having 69.2% to 84.6% moisture content, were successfully treated and decontaminated. This treatment afforded excellent hydrodechlorination yields for the 29 most toxic congeners of PCDDs, PCDFs and PCBs (98.3% degradation yield based on toxic equivalent quotient — or TEQ) after a 24 h treatment, at room temperature.