Synthesis and Structure of Ba(2)Sn(3)Sb(6), a Zintl Phase Containing Channels and Chains

The new Zintl phase dibarium tritin hexaantimonide, Ba(2)Sn(3)Sb(6) has been synthesized, and its structure has been determined by single-crystal X-ray diffraction methods. It crystallizes in the orthorhombic space group -Pnma with a = 13.351(1) ?, b = 4.4100(5) ?, c = 24.449(3) ?, and Z = 4 (T = -50 degrees C). The structure of Ba(2)Sn(3)Sb(6) comprises large channels [010] defined by 30-membered rings constructed from an anionic framework. This framework is built up from Sn-centered trigonal pyramids and tetrahedra, as well as zigzag chains of Sb atoms. Within the channels reside the Ba(2+) cations and additional isolated zigzag Sb-Sb chains. The simultaneous presence of Sn trigonal pyramids and tetrahedra implies that Ba(2)Sn(3)Sb(6) is a mixed-valence compound whose oxidation state notation can be best represented as (Ba(2+))(2)[(Sn(II))(2)(Sn(IV))(Sb(-)(III))(3)(Sb(-)(I))](2)(-)[(Sb(-)(I))(2)](2)(-).     

Use of a methoxy substituent in controlling the stereochemistry of intramolecular iron-mediated diene/olefin cyclocoupling

A methodology for stereocontrol during the intramolecular coupling between cyclohexadiene--Fe(CO)(3) complexes and pendant alkenes is presented. Introduction of a methoxy group at the C(3) position of the diene moiety controls pre- and postcyclization rearrangements of the diene Fe(CO)(3) unit, allowing the preparation of spirolactams with defined relative stereochemistry and with a cyclohexenone framework, thus making this reaction a potentially valuable tool for the construction of quaternary carbon centers.     

Regioselective heterohalogenation of 4-halo-anisoles via a series of sequential ortho-aluminations and electrophilic halogenations

As the aluminate base [LiAl(TMP)(2)(iBu)(2)] 1 displays halogen tolerance towards substituted aromatics, 4-halo-anisoles have been ortho-aluminated and electrophilically quenched to form synthetically useful multi-heterohalogenated anisoles, with the Al intermediates along the route structurally defined.     

Insight into the mechanism of the asymmetric addition of alkyl groups to aldehydes catalyzed by titanium-BINOLate species

The asymmetric addition of alkyl groups to aldehydes catalyzed by BINOLate-titanium complexes has become the testing grounds to evaluate the potential of new BINOL-based ligands. We have investigated the mechanism of this reaction and report our findings here. Model systems for the open form of the catalyst, (BINOLate)[Ti(O-i-Pr)(3)](2), based on mono-oxygen-alkylated BINOL ligands have been examined. Comparison of the reactivity and enantioselectivity of the mono-alkyl BINOL derivatives with those of BINOL indicate that the open form of the catalyst, (BINOLate)[Ti(O-i-Pr)(3)](2), is not active in the asymmetric addition reaction. Several BINOLate-titanium complexes have been synthesized and characterized by X-ray crystallography. These include the dinuclear (BINOLate)Ti(O-i-Pr)(2).Ti(O-i-Pr)(4), which contains a bridging naphtholate and isopropoxy group, trinuclear (BINOLate)Ti(O-i-Pr)(2).[Ti(O-i-Pr)(4)](2), and trimeric [(BINOL)Ti(O-i-Pr)(2)](3). The solid-state and solution structures reported here indicate that (BINOLate)Ti(O-i-Pr)(2) prefers to bind to titanium tetraisopropoxide rather than to itself, explaining why no nonlinear effects are observed in the catalytic reaction. Additionally, experimental evidence suggests that the BINOLate-titanium species responsible for the catalytic and stoichiometric asymmetric addition reactions are different, indicating that the proposed intermediate, (BINOLate)Ti(R)(aldehyde)(O-i-Pr), is not involved in either of these processes. Reactions were examined using different sources of the alkyl group [ZnMe(2) or MeTi(O-i-Pr)(3)]. Under similar conditions, it was found that the product ee's were the same, independent of whether ZnMe(2) or Me-Ti(O-i-Pr)(3) was used as the source of the alkyl groups. This indicates that the role of the dialkylzinc is not to add the alkyl group to the carbonyl but rather to transfer the alkyl group to titanium. On the basis of these results, we hypothesize that the intermediate in the asymmetric addition involves (BINOLate)Ti(O-i-Pr)(2)(aldehyde).MeTi(O-i-Pr)(3).     

Entropy-driven rearrangement of the water network at the hydrated amide group of the trans-formanilide-water cluster in the gas phase

Photoionization-induced rearrangement of the water network in the trans-formanilide 1:4 cluster, FA-(H(2)O)(4), has been investigated by using IR-photodissociation spectroscopy and quantum chemical calculations. The IR spectrum of FA-(H(2)O)(4) in the S(0) state shows that the observed cluster has a cyclic hydrogen-bonded structure where the CO group and the NH group of FA are bridged with four water molecules, consistent with the reported structure [E. G. Robertson, Chem. Phys. Lett., 2000, 325, 299]. However, the corresponding cyclic hydrogen-bonded structure in the D(0) state of [FA-(H(2)O)(4)](+) is a minor product arising from photoionization via the S(1)-S(0) origin of FA-(H(2)O)(4). The dominant product has an extended H-bonded structure, where the intermolecular hydrogen bond between the hydrogen of the OH group of a water molecule and the CO group is dissociated. This is the first observation of a photoionization-induced rearrangement of the water network in [FA-(H(2)O)(4)](+). Through DFT calculations, we conclude that the rearrangement occurs due to entropic effects.     

Pushing the frontiers of hard and soft scorpionate chemistry

The preparation and structure of the first scorpionate complex of a group 16 element, [Te(kappa(2)-Tm(Me))(2)], is reported. It displays square planar geometry at the Te atom and two distinct ligand conformations. In addition, the first pyrazolylborate complex of a group 15 element, [Bi(Tp)(2)(pzH)Cl], has been synthesized and characterized.     

Synthesis, spectroscopic characterization, X-ray structure, and DFT calculations of [Cu(tppz)(SCN)2]

This article presents a combined experimental and computational study of [Cu(tppz)(SCN)₂], where ttpz stands for 2,3,5,6-tetra-(2-pyridyl)pyrazine. The compound has been studied by IR, UV–Vis spectroscopy, and single crystal X-ray analysis. The geometry around copper atom may be described as a distorted square pyramid. The equatorial plane is defined by three nitrogen atoms of tppz and one nitrogen atom of thiocyanate group. The apical site is occupied by nitrogen atom of the second SCN^? ion. The electronic spectrum of [Cu(tppz)(SCN)₂] was analyzed, and bands were assigned through the DFT/TDDFT procedures.     

Stereoselective intramolecular nicholas reaction using epoxides as nucleophiles

[reaction: see text] The intramolecular nucleophilic attack of the epoxides on the exo-Co(2)(CO)(6)-propargylic cations provided cyclic ethers in good yields. The use of substrates with stereochemically defined oxiranes provided polysubstituted tetrahydropyrans and oxepanes with a high degree of stereocontrol. The cyclization is sensitive to the nature of the protecting group used at the primary alcohol, the use of tert-butyl carbonates being highly effective in terms of regioselectivity and yields.     

Photoionization-induced water migration in the amide group of trans-acetanilide-(H2O)1 in the gas phase

IR-dip spectra of trans-acetanilide-water 1:1 cluster, AA-(H(2)O)(1), have been measured for the S(0) and D(0) state in the gas phase. Two structural isomers, where a water molecule binds to the NH group or the CO group of AA, AA(NH)-(H(2)O)(1) and AA(CO)-(H(2)O)(1), are identified in the S(0) state. One-color resonance-enhanced two-photon ionization, (1 + 1) RE2PI, of AA(NH)-(H(2)O)(1) via the S(1)-S(0) origin generates [AA(NH)-(H(2)O)(1)](+) in the D(0) state, however, photoionization of [AA(CO)-(H(2)O)(1)] does not produce [AA(CO)-(H(2)O)(1)](+), leading to [AA(NH)-(H(2)O)(1)](+). This observation explicitly indicates that the water molecule in [AA-(H(2)O)(1)](+) migrates from the CO group to the NH group in the D(0) state. The reorganization of the charge distribution from the neutral to the D(0) state of AA induces the repulsive force between the water molecule and the CO group of AA(+), which is the trigger of the water migration in [AA-(H(2)O)(1)](+).     

Aryl-aryl interactions as directing motifs in the stereodivergent iron-catalyzed hydrosilylation of internal alkynes

The defined Fe hydride complex FeH(CO)(NO)(Ph(3)P)(2) is highly active as a catalyst for selective hydrosilylation of internal alkynes to vinylsilanes. Depending on the silane employed either E- or Z-selective hydrosilylation products were formed in excellent yields and good to excellent stereoselectivities.     

Synthesis and X-ray characterization of the phosphido-carbonyl cluster anions

The [Co(9)P(CO)(21)](2)(-) anion has been isolated from the products of the reaction between Na[Co(CO)(4)] and PCl(5) in tetrahydrofuran at reflux. The structure of the cluster anion [Co(9)P(CO)(21)](2)(-) in its tetraphenylphosphonium salt has been elucidated by X-ray analysis. The crystals are monoclinic, space group P2(1)/n, a = 12.528(3), b = 14.711(5), c = 19.312(6) A, beta = 93.68(2) degrees, Z = 2. Final R = 0.065 for 2300 unique reflections having I > 3sigma(I). The anion, which is disordered about an inversion center, consists of a monocapped square antiprismatic cluster containing an interstitial phosphide and surrounded by 13 terminal and 8 edge-bridging carbonyl ligands. Average values are: Co-Co 2.685 A, and Co-P 2.256 A. The [Co(10)P(CO)(22)](3)(-) anion has been obtained by condensation of the [Co(9)P(CO)(21)](2)(-) anion with [Co(CO)(4)](-) in tetrahydrofuran at reflux. While the [Co(9)P(CO)(21)](2)(-) anion is stable under CO, the [Co(10)P(CO)(22)](3)(-) anion is decomposed to [Co(9)P(CO)(21)](2)(-) and [Co(CO)(4)](-). The benzyltrimethylammonium salt of the [Co(10)P(CO)(22)](3)(-) anion has been studied by X-ray analysis. It gives triclinic crystals, space group P_1, a = 11.452(3), b = 23.510(6), c = 25.606(4) A, alpha = 112.46(1), beta = 95.79(1), gamma = 73.548(2) degrees, Z = 4. Final R = 0.041 for 8600 unique reflections having I > 3sigma(I). There are two independent trianions in the asymmetric unit, both showing similar geometries, consisting of bicapped square antiprismatic clusters with a central P atom, each bearing 10 terminal and 12 edge-bridging carbonyl ligands, 8 of which, bound to the capping metals, are markedly asymmetric. Average values are: Co-Co 2.678 A, and Co-P 2.262 A. Electrochemistry shows that [Co(9)P(CO)(21)](2)(-) and [Co(10)P(CO)(22)](3)(-) in acetonitrile solution undergo either a one-electron oxidation or a two-electron reduction. This latter process appears as a single step in the case of the dianion and as two separated one-electron steps in the case of the trianion. All the processes are accompanied by slow chemical complications, thus testifying that no stable redox congeners exist for these phosphide clusters.     

Synthesis and reactivity of the monomeric late-transition-metal parent amido complex [Ir(Cp*)(PMe3)(Ph)(NH2)

The late-transition-metal parent amido compound [Ir(Cp*)(PMe3)(Ph)(NH2)] (2) has been synthesized by deprotonation of the corresponding ammine complex [Ir(Cp*)(PMe3)(Ph)(NH3)][OTf] (6) with KN(SiMe3)2. An X-ray structure determination has ascertained its monomeric nature. Proton-transfer studies indicate that 2 can successfully deprotonate p-nitrophenylacetonitrile, aniline, and phenol. Crystallographic analysis has revealed that the ion pair [Ir(Cp*)(PMe3)(Ph)(NH3)][OPh] (8) exists as a hydrogen-bonded dimer in the solid state. Reactions of 2 with isocyanates and carbodiimides lead to overall insertion of the heterocumulenes into the N--H bond of the Ir-bonded amido group, demonstrating the ability of 2 to act as an efficient nucleophile. Intriguing reactivity is observed when amide 2 reacts with CO or 2,6-dimethylphenyl isocyanide. eta4-Tetramethylfulvene complexes [Ir(eta4-C5Me4CH2)(PMe3)(Ph)(L)] (L=CO (15), CNC6H3-2,6-(CH3)2 (16)) are formed in solution through displacement of the amido group by the incoming ligand followed by deprotonation of a methyl group on the Cp* ring and liberation of ammonia. Conclusive evidence for the presence of the Ir-bonded eta4-tetramethylfulvene moiety in the solid state has been provided by an X-ray diffraction study of complex 16.     

Rhodium boryl complexes in the catalytic, terminal functionalization of alkanes

A series of studies have been conducted by experimental and theoretical methods on the synthesis, structures, and reactions of CpRh boryl complexes that are likely intermediates in the rhodium-catalyzed regioselective, terminal functionalization of alkanes. The photochemical reaction of CpRh(eta(6)-C(6)Me(6)) with pinacolborane (HBpin) generates the bisboryl complex CpRh(H)(2)(Bpin)(2) (2), which reacts with neat HBpin to generate CpRh(H)(Bpin)(3) (3). X-ray diffraction, density functional theory (DFT) calculations, and NMR spectroscopy suggest a weak, but measurable, B-H bonding interaction. Both 2 and 3 dissociate HBpin and coordinate PEt(3) or P(p-Tol)(3) to generate the conventional rhodium(III) species CpRh(PEt(3))(H)(Bpin) (4) and CpRh[P(p-tol)(3)](Bpin)(2) (5). Compounds 2 and 3 also react with alkanes and arenes to form alkyl- and arylboronate esters at temperatures similar to or below those of the catalytic borylation of alkanes and arenes. Further, these compounds were observed directly in catalytic reactions. The enthalpies and free energies for generation of the 16-electron intermediate and for the C-H bond cleavage and B-C bond formation have been calculated with DFT. These results strongly suggest that the C-H bond cleavage process occurs by a metal-assisted sigma-bond metathesis mechanism to generate a borane complex that isomerizes if necessary to place the alkyl group cis to the boryl group. This complex with cis boryl and alkyl groups then undergoes B-C bond formation by a second sigma-bond metathesis to generate the final functionalized product.     

Versatile binding properties of a di-2-pyridyl ketone nicotinoylhydrazone ligand: crystal structure of a Cu(II) complex

Six new copper complexes of di-2-pyridyl ketone nicotinoylhydrazone (HDKN) have been synthesized. The complexes have been characterized by a variety of spectroscopic techniques and the structure of [Cu(DKN)(2)]·H(2)O has been determined by single crystal X-ray diffraction. The compound [Cu(DKN)(2)]·H(2)O crystallized in the monoclinic space group P2(1) and has a distorted octahedral geometry. The IR spectra revealed the presence of variable modes of chelation for the investigated ligand. The EPR spectra of compounds [Cu(2)(DKN)(2)(μ-N(3))(2)] and [Cu(2)(DKN)(2)(μ-NCS)(2)] in polycrystalline state suggest a dimeric structure as they exhibited a half field signal, which indicate the presence of a weak interaction between two Cu(II) ions in these complexes.     

Mechanisms of water oxidation catalyzed by ruthenium diimine complexes

(18)O-isotope-labeling studies have led to the conclusion that there exist two major pathways for water oxidation catalyzed by dimeric ruthenium ions of the general type cis, cis-[L2Ru(III)(OH2)]2O(4+). We have proposed that both pathways involve concerted addition of H and OH fragments derived from H 2O to the complexes in their four-electron-oxidized states, i.e., [L2Ru(V)(O)]2O(4+), ultimately generating bound peroxy intermediates that decay with the evolution of O2. The pathways differ primarily in the site of addition of the OH fragment, which is either a ruthenyl O atom or a bipyridine ligand. In the former case, water addition is thought to give rise to a critical intermediate whose structure is L2Ru(IV)(OH)ORu(IV)(OOH)L2(4+); the structures of intermediates involved in the other pathway are less well defined but may involve bipyridine OH adducts of the type L2Ru(V)(O)ORu(IV)(OH)(L(*)OH)L(4+), which could react further to generate unstable dioxetanes or similar endoperoxides. Published experimental and theoretical support for these pathways is reviewed within the broader context of water oxidation catalysis and related reactions reported for other diruthenium and group 8 monomeric diimine-based catalysts. New experiments that are designed to probe the issue of bipyridine ligand "noninnocence" in catalysis are described. Specifically, the relative contributions of the two pathways have been shown to correlate with substituent effects in 4,4'- and 5,5'-substituted bipyridine complexes in a manner consistent with the formation of a reactive OH-adduct intermediate in one of the pathways, and the formation of OH-bipyridine adducts during catalytic turnover has been directly confirmed by optical spectroscopy. Finally, a photosensitized system for catalyzed water oxidation has been developed that allows assessment of the catalytic efficiencies of the complex ions under neutral and alkaline conditions; these studies show that the ions are far better catalysts than had previously been assumed based upon reported catalytic parameters obtained with strong oxidants in acidic media.     

Synthesis, structure, and reactivity of new tetranuclear Ru-Hbpp-based water-oxidation catalysts

The preparation of three new octadentate tetranucleating ligands made out of two Ru-Hbpp-based units [where Hbpp is 3,5(bispyridyl)pyrazole], linked by a xylyl group attached at the pyrazolate moiety, of general formula (Hbpp)(2)-u-xyl (u = p, m, or o) is reported, together with its dinucleating counterpart substituted at the same position with a benzyl group, Hbpp-bz. All of these ligands have been characterized with the usual analytical and spectroscopic techniques. The corresponding tetranuclear ruthenium complexes of general formula {[Ru(2)(trpy)(2)(L)](2)(μ-(bpp)(2)-u-xyl)}(n+) [L = Cl or OAc, n = 4; L = (H(2)O)(2), n = 6] and their dinuclear homologues {[Ru(2)(trpy)(2)(L)](μ-bpp-bz)}(n+) [L = Cl or OAc, n = 2; L = (H(2)O)(2), n = 3] have also been prepared and thoroughly characterized both in solution and in the solid state. In solution, all of the complexes have been characterized spectroscopically by UV-vis and NMR and their redox properties investigated by means of cyclic voltammetry techniques. In the solid state, monocrystal X-ray diffraction analysis has been carried out for two dinuclear complexes {[Ru(2)(trpy)(2)(L)](μ-bpp-bz)}(2+) (L = Cl and OAc) and for the tetranuclear complex {[Ru(2)(trpy)(2)(μ-OAc)](2)(μ-(bpp)(2)-m-xyl)}(4+). The capacity of the tetranuclear aqua complexes {[Ru(2)(trpy)(2)(H(2)O)(2)](2)(μ-(bpp)(2)-u-xyl)}(6+) and the dinuclear homologue {[Ru(2)(trpy)(2)(H(2)O)(2)](μ-bpp-bz)}(3+) to act as water-oxidation catalysts has been evaluated using cerium(IV) as the chemical oxidant in pH = 1.0 triflic acid solutions. It is found that these complexes, besides generating significant amounts of dioxygen, also generate carbon dioxide. The relative ratio of [O(2)]/[CO(2)] is dependent not only on para, meta, or ortho substitution of the xylylic group but also on the concentration of the starting materials. With regard to the tetranuclear complexes, the one that contains the more sterically constrained ortho-substituted ligand generates the highest [O(2)]/[CO(2)] ratio.     

Structure-directing and template roles of aromatic molecules in the self-assembly formation process of 3D holmium-succinate MOFs

Two new holmium-succinate frameworks have been synthesized by hydrolysis in situ of the succinylsalicylic acid under different hydrothermal conditions. Compound 1, [Ho(2)(C(4)H(4)O(4))(3)(H(2)O)(2)]·0.33(C(7)H(6)O(3)), P ?i space group, has a novel structure composed by 1D-SBUs consisting of [HoO(9)] chains of polyhedra linked by the succinate ligands giving a 3D framework. Compound 2, [Ho(2)(C(4)H(4)O(4))(3)(H(2)O)(2)], also belonging to the P ?i space group, has a denser structure. The role of the in-situ-generated salicylic acid on formation of both structures is studied by means of a synthesis design methodology. A topological study of the new holmium succinate compounds in comparison with the previously reported 3D holmium-succinate framework is performed here.     

Rational synthesis of beta-substituted chlorin building blocks

Chlorins bearing synthetic handles at specific sites about the perimeter of the macrocycle constitute valuable building blocks. We previously developed methodology for preparing meso-substituted chlorin building blocks and now present methodology for preparing several complementary beta-substituted chlorin building blocks. The chlorins bear one or two beta substituents, one meso substituent, a geminal dimethyl group to lock in the chlorin hydrogenation level, and no flanking meso and beta substituents. The synthesis involves convergent joining of an Eastern half and a Western half. New routes have been developed to two beta-substituted bromo-dipyrromethane monocarbinols (Eastern halves). A new beta-substituted Western half was prepared following the method for preparing an unsubstituted Western half (3,3-dimethyl-2,3-dihydrodipyrrin). Chlorin formation is achieved by a two-flask process of acid-catalyzed condensation followed by metal-mediated oxidative cyclization. beta-Substituted chlorins have been prepared in 18-24% yield bearing a 4-iodophenyl group at the 8-position, a 4-iodophenyl group or a 4-[2-(trimethylsilyl)ethynyl]phenyl group at the 12-position, and a 4-iodophenyl group and a 4-[2-(trimethylsilyl)ethynyl]phenyl group at diametrically opposed beta-positions (2, 12). The latter building block makes possible the stepwise construction of linear multi-chlorin architectures. The chlorins exhibit typical absorption and fluorescence spectra. A systematic shift in the absorption maximum (637-655 nm for the free base chlorins, 606-628 nm for the zinc chlorins) and intensity of the chlorin Q(y)() band (epsilon up to 79 000 M(-)(1) cm(-)(1)) is observed depending on the location of the substituents. The characteristic spectral features and location of substituents in defined positions make these chlorins well suited for a variety of applications in biomimetic and materials chemistry.     

Extractive separation and spectrophotometric determination of palladium and platinum with dithizone in the presence of stannous chloride

The conditions [acid used, presence of chloride and tin(II)] for the extractive separation and spectrophotometric determination of palladium and platinum as the dithizonates Pd(HDz)(2) and Pt(HDz)(2) have been examined. In the absence of stannous chloride platinum does not undergo extraction. Conditions for the separation and determination of these metals in the presence of mercury, gold and copper, which are also extracted with dithizone into carbon tetrachloride or chloroform under the conditions suitable for palladium (1M sulphuric acid/0.1M hydrochloric acid), have been defined. The mercury and gold dithizonates are formed quickly and can be removed before the palladium and platinum compounds have had time to form. They can be decomposed with iodide. Copper dithizonate is decomposed by reduction with tin(II). The proposed procedure has been applied to the determination of palladium in technical platinum metal.     

Synthesis and characterisation of new titanium amino-alkoxides: precursors for the formation of TiO2 materials

Reaction of the amino-alkoxides HOCH(CH(2)NMe(2))(2) (Hbdmap) and HOC(CH(2)NMe(2))(3) (Htdmap) with [Ti(OR)(4)] yields a series of heteroleptic titanium alkoxides [Ti(OR)(4-n)(L)(n)] (L = bdmap, tdmap). Substitution of the monodentate alkoxide with the chelating alkoxides becomes progressively more difficult, with homogeneous products being obtained only for n = 1, 2. The structure of [Ti(OEt)(3)(bdmap)](2), a mu-OEt bridged dimer, has been determined. Hydrolysis of [Ti(OR)(2)(L)(2)], by adventitious moisture affords the dimeric oxo-alkoxides [Ti(O)(L)(2)](2), both of which have been characterised crystallographically. These two compounds have also been prepared by reaction of [Ti(NMe(2))(2)(L)(2)] with the hydrated metal salts [Zn(acac)(2).2H(2)O] and [Zn(OAc)(2).2H(2)O] using the intrinsic water molecules in these salts to react with the labile amido groups, though the former also produces Me(Me(2)N)C=C(H)C(O)Me from reaction of liberated HNMe(2) with the coordinated acac ligand, while the latter also affords the ligand exchange product [Zn(OAc)(bdmap)]. In neither case does the free dimethylamino group of [Ti(O)(L)(2)](2) coordinate a second metal. The dimeric structure of [Zn(OAc)(bdmap)](2) has been established, and the structure of the tetrameric oxo-alkoxide [Ti(O)(OPr(i))(OCH(2)CH(2)NMe(2))](4) is reported for comparison with others in this study. [Ti(OEt)(3)(bdmap)](2) has been used as a precursor in AACVD (Aerosol-Assisted Chemical Vapour Deposition) to generate amorphous TiO(2) films on glass at 440 degrees C, and TiO(2)@C nanoparticles of approximate diameter 350 nm with a carbon coating of width ca. 75 nm on heating in a sealed container at 700 degrees C.