Synthesis of a novel liquid crystalline bisindenocarbazole derivative

In this paper we describe the synthesis of four new bisindenocarbazole derivatives, prepared by selective bromination of bisindenocarbazole in the 7- and 7'-positions, followed by Suzuki crosscoupling with alkyl-substituted phenyl, biphenyl and fluorene units. From this new class of fused aromatics a liquid crystalline derivative is reported for the first time. The bisindenocarbazole with two 4-hexylphenyl side groups exhibits a broad nematic phase between 180 and 250°C, whereas the other derivatives are crystalline or form molecular glasses. All bisindenocarbazoles exhibit high thermal stabilities above 300°C and show excellent electrochemical stability. HOMO and LUMO levels of -5.4 eV and -2.3 eV, respectively, were determined by cyclic voltammetry and optical spectroscopy. The bisindenocarbazoles display a strong blue fluorescence with up to 56% quantum yield in solution.     

A supramolecular cup-and-ball C60-porphyrin conjugate system

In addition to the ammonium-crown ether recognition, pi-stacking interactions between the C60 sphere and the porphyrin moiety have been evidenced in a supramolecular complex obtained from a porphyrin-crown ether conjugate and a fullerene derivative bearing an ammonium unit.     

A novel photorearrangement of a cyclohexadiene derivative of C60

[reaction: see text] Photorearrangement of tetraalkoxycarbonyl-substituted cyclohexadiene derivatives of C(60) yields not only well-known bis(fulleroid) but also bis(methano)fullerene. Existence of a labile and structurally new intermediate is observed in the reaction mixture. The discovery of the compound suggests the existence of another possible pathway giving those two products other than the widely accepted [4 + 4]/[2 + 2 + 2] mechanism.     

Fluorescent supramolecular liquid crystalline polymers from nucleobase-terminated monomers

While thymine or N6-(4-methoxybenzoyl)adenine terminated bis(4-alkoxy)-substituted bis(phenylethynyl)benzene monomers show no liquid crystalline behaviour by themselves, mixing the complementary nucleobase monomers together results in the formation of thermotropic liquid crystalline phases.     

Photochemistry of supramolecular systems containing C60

Fullerenes have been used successfully in the covalent assembly of supramolecular systems that mimic some of the electron transfer steps of photosynthetic reaction centers. In these constructs C60 is most often used as the primary electron acceptor; it is linked to cyclic tetrapyrroles or other chromophores which act as primary electron donors in photoinduced electron transfer processes. In artificial photosynthetic systems, fullerenes exhibit several differences from the superficially more biomimetic quinone electron acceptors. The lifetime of the initial charge-separated state in fullerene-based molecules is, in general, considerably longer than in comparable systems containing quinones. Moreover, photoinduced electron transfer processes take place in non-polar solvents and at low temperature in frozen glasses in a number of fullerene-based dyads and triads. These features are unusual in photosynthetic model systems that employ electron acceptors such as quinones, and are more reminiscent of electron transfer in natural reaction centers. This behavior can be attributed to a reduced sensitivity of the fullerene radical anion to solvent charge stabilization effects and small internal and solvent reorganization energies for electron transfer in the fullerene systems, relative to quinone-based systems.     

Flowerlike supramolecular architectures assembled from C60 equipped with a pyridine substituent

Fullerene (C(60))-rich and photoconductive flowerlike supramolecular assembly was constructed from self-organization of pyridine substituted C(60) by a facile drop-casting method.     

Hydrogen bonding-directed quantitative self-assembly of cyclotriveratrylene capsules and their encapsulation of C60 and C70

Under the direction of intramolecular three-center hydrogen bonding, two cyclotriveratrylene (CTV)-based capsules are assembled quantitatively from C(3)-symmetric CTV precursors by forming three imine bonds from arylamide-derived foldamer segments. (1)H and (13)C NMR and UV/vis experiments reveal that the capsules strongly encapsulate C(60) and C(70) in discrete solvents.     

Deformation of isotropic and anisotropic liquid droplets dispersed in a cellulose liquid crystalline derivative

In this work we study the strain-induced deformation of both isotropic and anisotropic liquid droplets dispersed in a liquid crystalline cellulose matrix. We have produced two types of acetoxypropylcellulose (APC) solid films one with a droplet dispersion of the commercial liquid crystal E7 from Merck, and another with a droplet dispersion of silicone oil. To produce the solid films a solution of APC (60%wt) in dimethylacetamide (DMAc) with 15%wt of either the commercial nematic liquid crystal E7 or the silicone oil was prepared. After homogenization the phase separated solutions were submitted to a shear flow mechanical field and casted onto a Teflon plate. We performed mechanical uniaxial stress-strain tests in the free standing films recording continuously the strain and images of the deformed droplets. The mechanical tests were carried out using a mini stress-strain testing machine apparatus and an Olympus optical polarizing microscope with an attached CCD camera. The images obtained from the mechanical tests for each value of the imposed strain were then analyzed comparing the images of deformed droplets with those of the undeformed ones, extracting in this way the local strain field. The droplet deformation data obtained show, as expected, significant differences in the local strain field when stretching parallel and perpendicular to the initial shear direction. No significant differences were found in the local strain fields obtained from the silicone oil and the E7 droplets films. The local strain fields variation with the imposed strain are compared with the predictions of the theory developed for nematic elastomers by Warner and Terentjev (Liquid crystal elastomers. Clarendon Oxford Press, Oxford, 2003).     

Molecular and supramolecular C60-oligophenylenevinylene conjugates

Fullerene derivatives are attractive building blocks for the preparation of molecular and supramolecular photoactive devices. As a part of this research, combination of C60 with oligophenylenevinylene (OPV) subunits has generated significant research efforts. These results are summarized in the present account to illustrate the current state-of-the-art of fullerene chemistry for the development of new photoactive materials.     

Preliminary communication A novel series of liquid crystalline organomercury complex liquid crystals

A novel family of bis[(4-alkoxyphenyl)ethynyl]mercury liquid crystals has been synthesized. Their mesomorphism has been studied by DSC and polarizing microscopy and a very broad SmA phase has been found.     

Ferroelectric side group liquid crystalline polysiloxanes containing a chiral sulphinate derivative

A series of chiral liquid crystalline homo- and co-polysiloxanes is reported, in which the chirality is introduced via an arenesulphinate moiety. All polysiloxanes were prepared by using three polymer-analogous reactions and exhibit the ferroelectric SmC* phase. In the series of copolymers, a high heterogeneity in the ratio of mesogenic pendants is observed and explains the existence of large biphasic regions at the phase transitions. A complete characterization of the ferroelectric properties was performed for the copolysiloxanes, and revealed high values of the spontaneous polarization.     

Ferroelectric side group liquid crystalline polysiloxanes containing a chiral sulphinate derivative

A series of chiral liquid crystalline homo- and co-polysiloxanes is reported, in which the chirality is introduced via an arenesulphinate moiety. All polysiloxanes were prepared by using three polymer-analogous reactions and exhibit the ferroelectric SmC* phase. In the series of copolymers, a high heterogeneity in the ratio of mesogenic pendants is observed and explains the existence of large biphasic regions at the phase transitions. A complete characterization of the ferroelectric properties was performed for the copolysiloxanes, and revealed high values of the spontaneous polarization.     

A supramolecular and liquid crystalline water-based alignment medium based on azobenzene-substituted 1,3,5-benzenetricarboxamides

A supramolecular, lyotropic liquid crystalline alignment medium based on an azobenzene-containing 1,3,5-benzenetricarboxamide (BTA) building block is described and investigated. As we demonstrate, this water-based system is suitable for the investigation of various water-soluble analytes and allows for a scaling of alignment strength through variation of temperature. Additionally, alignment is shown to reversibly collapse above a certain temperature, yielding an isotropic solution. This collapse allows for isotropic reference measurements, which are typically needed in addition to those in an anisotropic environment, to be performed using the same sample just by varying the temperature. The medium described thus provides easy access to anisotropic NMR observables and simplifies structure elucidation techniques based thereon.     

Multiple hydrogen-bond-induced supramolecular nanostructure from a pincer-like molecule and a [60]fullerene derivative

A new supramolecular self-assembled system between a perylene bisimide bearing diaminopyridine-substituted isophthalamide groups (PP) and a [60]fullerene containing barbituric acid moiety (C₆₀bar) through a complementary six-point hydrogen-bonding interaction was constructed. The formation of hydrogen bonding was confirmed by ¹H NMR spectra studies in CDCl₃. Fluorescence quenching experiments indicated that the fluorescence of PP was greatly quenched by the hydrogen-bonded C₆₀bar (K_sv=2.71×10⁴ M⁻¹). A steady and rapid cathodic 0.15 μA cm⁻² photocurrent response of the PP/C₆₀bar film deposited onto an ITO electrode was produced under the irradiation of 20 mW cm⁻² white light, indicating the presence of photo-induced electron transfer between PP and C₆₀bar. TEM images showed that spherical particles were fabricated by the self-assembly of PP and C₆₀bar through hydrogen-bonding interaction.     

Octupole-like supramolecular aggregates of conical iron fullerene complexes into a three-dimensional liquid crystalline lattice

The installation of three structural features into a fullerene molecule, a conical shape, a polar iron-ferrocene complex, and long alkyl chains, allowed dipolar molecules 1 and 2 to undergo microphase separation and to form a three-dimensional lattice in a crystalline and a thermotropic liquid crystalline phase. The key feature is a tetrameric octupole-like aggregate, in which four dipoles are arranged supramolecularly to cancel the molecular polarity, forming a sphere. In addition to this lattice formation mechanism, the molecules incorporate noteworthy features, such as redox active C(60)/ferrocene and luminescent cyclophenacene.     

Preorganised effects of a tetramesogenic supermolecule on supramolecular assembly in the liquid crystalline phases

After preparing a homologous series of tetrameric mesogenic compounds in which two U-shaped molecules were connected via a rigid benzene derivative or a flexible alkyl chain, we investigated their phase transition behaviour using optical microscopy, differential scanning calorimetry and X-ray diffraction analysis. The compounds possessing an alkyl spacer as the central group exhibited nematic and smectic A phases just as the corresponding U-shaped molecule did. The compound possessing a 1,2-benzene unit as the connecting group showed nematic and smectic A phases, although the compound possessing a 1,3-benzene unit exhibited only an anticlinic smectic C phase. Structure–property relations of the liquid crystalline tetramers are interpreted in terms of preorganised effects of the four mesogenic units.     

Light-controlled supramolecular helicity of a liquid crystalline phase using a helical polymer functionalized with a single chiroptical molecular switch

Control over the preferred helical sense of a poly(n-hexyl isocyanate) (PHIC) by using a single light-driven molecular motor, covalently attached at the polymer's terminus, has been accomplished in solution via a combination of photochemical and thermal isomerizations. Here, we report that after redesigning the photochromic unit to a chiroptical molecular switch, of which the two states are thermally stable but photochemically bistable, the chiral induction to the polymer's backbone is significantly improved and the handedness of the helical polymer is addressable by irradiation with two different wavelengths of light. Moreover, we show that the chiral information is transmitted, via the macromolecular level of the polyisocyanate, to the supramolecular level of a lyotropic cholesteric liquid crystalline phase consisting of these stiff, rodlike polymers. This allows the magnitude and sign of the supramolecular helical pitch of the liquid crystal film to be fully controlled by light.     

Effect of stoichiometry on liquid crystalline supramolecular polymers formed with complementary nucleobase pair interactions

We report herein studies on the liquid crystalline behavior of a series of supramolecular materials that contain different ratios of two complementary symmetrically-substituted alkoxy-bis(phenylethynyl)benzene AA- and BB-type monomers. One monomer has thymine units placed at either end of the rigid mesogenic core, while the other has N⁶-(4-methoxybenzoyl)-adenine units placed on the ends. Differential scanning calorimetric and polarized optical microscopy studies have been carried out on these systems. These studies show that the material's behavior is strongly dependent on its thermal history. As a result, the materials can exhibit, on heating, either a liquid crystalline phase, a crystalline phase, or the coexistence of crystalline and liquid crystalline regions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5049–5059, 2006     

Band structure studies on crystalline C60, Ca3C60, and Ca5C60

The three-dimensional EHMO crystal orbital calculations for crystalline C₆₀, Ca₃C₆₀, and Ca₅C₆₀ are reported. The ground states of both undoped solid C₆₀ and partially doped Ca₃C₆₀ are found to be insulating with an indirect energy gap of 1.2 and 0.5 eV, respectively. In contrast, Ca₅C₆₀ forms a metallic conducting phase with a set of three half-filled bands crossing the Fermi level, which is found to be located close to a peak of the density of state. The character of crystal orbitals near the Fermi level for both Ca₃C₆₀ and Ca₅C₆₀ is completely carbonlike. In both cases, the Ca atoms are almost fully ionized and C₆₀ molecules form a stable negative charge state with six to 10 additional electrons. © 1995 John Wiley & Sons, Inc.