Rate and product studies with dimethyl phosphorochloridate and phosphorochloridothionate under solvolytic conditions

The specific rates of solvolysis of dimethyl phosphorochloridate and of dimethyl phosphorochloridothionate are very well correlated using the extended Grunwald-Winstein equation, with incorporation of the NT solvent nucleophilicity scale and the YCl solvent ionizing power scale. The sensitivity parameters (l and m) are similar to each other and also similar to previously recorded values for solvolyses of arenesulfonyl chlorides, which were proposed to follow a concerted displacement mechanism. For solvolyses in aqueous ethanol or aqueous methanol the product selectivities (S) are close to unity. For solvolyses in aqueous 2,2,2-trifluoroethanol, the values are too small to accurately measure, showing a very large preference for product formation involving nucleophilic attack by the water component. It is concluded that the chloride and chloridothionate solvolyses, in common with the solvolyses of arenesulfonyl chlorides, follow a concerted displacement mechanism.     

Rate and product studies in the solvolyses of N,N-dimethylsulfamoyl and 2-propanesulfonyl chlorides

Contrary to earlier suggestions of an S(N)1 pathway for solvolyses of N,N-dimethylsulfamoyl chloride (1), an extended Grunwald-Winstein equation treatment of the specific rates of solvolysis in 32 solvents shows an appreciable sensitivity towards changes in both solvent nucleophilicity and solvent ionizing power. The actual values are very similar to those obtained in earlier studies of the solvolyses of sulfonyl and phosphoryl chlorides, solvolyses which are believed to proceed by an S(N)2 pathway. The observation of similar selectivities in aqueous-alcohol solvents further supports this assignment. In a recent report, an addition-elimination (association-dissociation) pathway was proposed for solvolyses of 2-propanesulfonyl chloride (2). A severe multicollinearity problem has been removed by the addition of several specific rates of solvolysis in fluoroalcohol-containing solvents. The new analyses using the extended Grunwald-Winstein equation lead to sensitivities similar to those for and the previously studied related compounds, and these solvolyses are also best described as following an S(N)2 pathway.     

S(N)2 Mechanism for Alcoholysis, Aminolysis, and Hydrolysis of Acetyl Chloride

First-order solvolysis rate constants are reported for solvolyses of acetyl chloride in methanol and MeOD, and in binary aqueous mixtures with acetone, acetonitrile, ethanol, methanol, and trifluoroethanol at 0 degrees C. Product selectivities (S = [MeCOOR]/[MeCOOH] x [water]/[alcohol]) are reported for solvolyses in ethanol/ and methanol/water at 0 degrees C. Solvolyses of acetyl chloride show a high sensitivity to changes in solvent ionizing power, consistent with C-Cl bond cleavage. As the solvent is varied from pure ethanol (or methanol) to water, S values and rate-rate profiles show no evidence for the change in reaction channel observed for solvolyses of benzoyl and trimethylacetyl chlorides. However, using rate ratios in 40% ethanol/water and 97% trifluoroethanol/water (solvents of similar ionizing power but different nucleophilicities) to compare sensitivities to nucleophilic attack, solvolyses of acetyl chloride are over 20-fold more sensitive to nucleophilic attack than benzoyl chloride. The solvent isotope effect of 1.29 (MeOH/MeOD) for acetyl chloride is similar to that for p-methoxybenzoyl chloride (1.22) and is lower than for benzoyl chloride (1.55). Second-order rate constants for aminolyses of acetyl chloride with m-nitroaniline in methanol at 0 degrees C show that acetyl chloride behaves similarly to p-methoxybenzoyl chloride, whereas benzoyl chloride is 40-fold more sensitive to the added amine. The results indicate mechanistic differences between solvolyses of acetyl and benzoyl chlorides, and an S(N)2 mechanism is proposed for solvolyses and aminolyses by m-nitroaniline of acetyl chloride (i.e. these reactions are probably not carbonyl additions, but a strong sensitivity to nucleophilic attack accounts for their high rates).     

Application of the NT solvent nucleophilicity scale to attack at phosphorus: solvolyses of N,N,N',N'-tetramethyldiamidophosphorochloridate

The specific rates of solvolysis of N,N,N',N'-tetramethyldiamidophosphorochloridate have been measured at 25.0 degrees C in 31 solvents. Analysis with the extended Grunwald-Winstein equation leads to sensitivities toward changes in solvent nucleophilicity (l) of 1.20 +/- 0.07 and toward changes in solvent ionizing power (m) of 0.69 +/- 0.04. The correlation is improved by omission of the four data points for 2,2,2-trifluoroethanol-ethanol mixtures (F-test value from 155 to 320) with very small reductions in both l and m values. Activation parameters are reported for eight of the solvolyses. The l and m values are very similar to those previously reported for solvolyses of several arenesulfonyl chlorides, consistent with a concerted substitution process. This assignment is supported by a large k(Cl)/k(F) ratio for hydrolysis and a corresponding ratio for hydroxide-assisted hydrolysis of 178. The stereochemistry of nucleophilic attack at tetracoordinate phosphorus(V) is discussed.     

Kinetics and Mechanism of Monomolecular Heterolysis of Commercial Organohalogen Compounds: XXXI. Solvent Effect on the Rate of 1-Methyl-1-chlorocyclopentane Heterolysis. Correlation Analysis of Solvation Effects

Heterolysis of 1-methyl-1-chlorocyclopentane in protic and aprotic solvents occurs by the E1 mechanism. The reaction rate in aprotic solvents or in a set of protic and aprotic solvents is satisfactorily described by the parameters of the polarity and electrophilicity or ionizing power of the solvents. In protic solvents, the reaction rate grows with increasing polarity or ionizing power of the solvent and decreases with increasing nucleophilicity.     

Correlation of the rates of solvolysis of benzoyl fluoride and a consideration of leaving-group effects

The specific rates of solvolysis of benzoyl fluoride have been determined at 25.0 degrees C in 37 pure and binary solvents. Together with seven values from the literature, these give a satisfactory correlation over the full range of solvents when the extended Grunwald-Winstein equation is applied. The sensitivities to changes in solvent nucleophilicity and solvent ionizing power are very similar to those for octyl fluoroformate, suggesting that the addition step of an addition-elimination mechanism is rate determining. In the solvent-composition region where benzoyl chloride also shows bimolecular solvolysis, the appreciable k(Cl)/k(F) values are proposed as being primarily due to a more efficient ground-state stabilization for the fluoride.     

Correlation of the Rates of Solvolysis of the Benzhydryldimethylsulfonium Ion. Application of the Aromatic Ring Parameter(1)

Values for the specific rates of solvolysis of the benzhydryldimethylsulfonium ion in 34 solvents have been analyzed using various forms of the extended Grunwald-Winstein equation. The specific rates are insensitive toward changes in solvent nucleophilicity (N(T)) values, and they correlate best against a combination of Y(+) values (based on the solvolyses of the 1-adamantyldimethylsulfonium ion) and aromatic ring parameter (I) values. Common-molecule return is observed, being especially powerful in solvents rich in fluoro alcohol; the logarithm of the associated mass law constant correlates inversely with the solvent N(T) values. The product selectivities in ethanol-water mixtures are also consistent with an S(N)1 mechanism for the solvolyses.     

Solvent polarity and organic reactivity in mixed solvents: evidence using a reactive molecular probe to assess the role of preferential solvation in aqueous alcohols

Product selectivities [S = ([ester product]/[acid product]) x ([water]/[alcohol solvent])] are reported for solvolyses of p-methoxybenzoyl chloride (2) in aqueous methanol, ethanol, 2,2,2-trifluoroethanol, n-propyl alcohol, isopropyl alcohol, and tert-butyl alcohol at 25, 35, and 45 degrees C. S values are small and depend significantly on the alcohol cosolvent, varying from 1.3 in methanol to 0.1 in tert-butyl alcohol, but S depends only slightly on the solvent composition, and on the temperature. As S adjusts the product ratios for changes in bulk solvent compositions, it is suggested that preferential solvation by either alcohol or water at the reaction site is not a major factor influencing rates or products. Logarithms of rates of solvolyses of 2 correlate well with Kosower Z values (based on solvatochromism). In contrast, another solvatochromic polarity index, E(T)(30), shows "dispersion" in correlations with the solvent ionizing power parameter, Y(OTs), probably due to aromatic ring and other solvation effects.     

Solvolysis-decomposition of 2-adamantyl chloroformate: evidence for two reaction pathways

Reaction of 2-adamantyl chloroformate under a variety of solvolytic conditions leads to 2-adamantyl chloride accompanied by solvolysis products, some with and some without retention of the CO(2) unit. For example, in 100% ethanol, only 4.8% 2-adamantyl chloride is formed with the mixed carbonate (88%) being the dominant product, and in 100% 2,2,2-trifluoroethanol, the products are both formed with loss of CO(2), 59% of the chloride and 41% of the ether. With exclusion of the specific rates in 100% and 90% ethanol and methanol, a good Grunwald-Winstein plot against Y(Cl) values (solvent ionizing power) is obtained, with a slope of 0.47 +/- 0.03. The results are compared with those reported earlier for 1-adamantyl chloroformate and isopropyl chloroformate and mechanistic conclusions are drawn.     

Is the tert-butyl chloride solvolysis the most misunderstood reaction in organic chemistry? Evidence against nucleophilic solvent participation in the tert-butyl chloride transition state and for increased hydrogen bond donation to the 1-adamantyl chloride solvolysis transition state.

Despite theoretical calculations to the contrary, it has been argued that the 1-adamantyl cation is more stable than the tert-butyl cation in media of high dielectric constant. This argument has been utilized to suggest that the higher rate of solvolysis of tert-butyl chloride in aqueous ethanol is evidence for nucleophilic solvent participation in this classic reaction. Further, in "more highly ionizing" solvents, the rate of 1-adamantyl chloride is nearly the same as that of tert-butyl chloride, which is interpreted as a manifestation of the relative stabilities of the cations. However, the evidence cited does not explain the increased sensitivity of the rate of solvolysis of 1-adamantyl chloride over tert-butyl chloride to solvents which are better able to donate hydrogen bonds. The hypothesis developed here is that 1-adamantyl chloride solvolysis is assisted by hydrogen bond donation departing chloride ion to a greater extent than that of tert-butyl chloride solvolysis, most likely due to lessened steric interactions in a developing pyramidal cation. This hypothesis is supported by multiparameter solvent effect factor analyses utilizing the KOMPH2 equation which, in addition, quantifies the important role of ground-state destabilization due to strong solvent-solvent interactions. An important result from the good correlation of free energies of transfer of the tert-butyl chloride solvolysis transition state is that there is no change in mechanism, and, in particular, no nucleophilic participation even in non-hydroxylic basic solvents. The equation is also applied to the case of dimethylsulfonium ion solvolyses where the tert-butyl salt reacts substantially faster than the 1-adamantyl salt in ethanol and the gas phase. The decreased rate of the former in hydrogen bond donating solvents relative to the gas phase is as yet unclear. Solvent N values that were generated to characterize solvent nucleophilicity are shown not to be correlated by measures of solvent basicity but rather by the negative of measures of solvent hydrogen bond donor ability.     

Nucleophilic Participation in the Solvolyses of (Arylthio)methyl Chlorides and Derivatives: Application of Simple and Extended Forms of the Grunwald-Winstein Equations

The specific rates of solvolysis of chloromethyl phenyl sulfide [(phenylthio)methyl chloride] and its p-chloro-derivative have been determined at 0.0 °C in a wide range of hydroxylic solvents, including several containing a fluroalcohol. Treatment in terms of a two-term Grunwald-Winstein equation, incorporating terms based on solvent ionizing power (Y(Cl)) and solvent nucleophilicity (N(T)) suggest a mechanism similar to that for the solvolyses of tert-butyl chloride, involving in the rate-determining step a nucleophilic solvation of the incipient carbocation in an ionization process. A previous suggestion, that a third-term governed by the aromatic ring parameter (I) is required, is shown both for the new and for the previously studied related substrates to be an artifact, resulting from an appreciable degree of multicollinearity between I values and a linear combination of N(T) and Y(Cl) values.     

Influence of the solvent on the rate constant of the reaction of the cumylperoxy radical with benzyl alcohol

The rate constants of the reaction of stripping of a hydrogen atom from a benzyl alcohol molecule by the cumylperoxy radical were measured in various solvents. The main factor determining the change in the value of the constant with variation of the solvent is the basicity (nucleophilicity) of the medium, an increase in which promotes the occurrence of the reaction.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 21, No. 5, pp. 615–620, September–October, 1985.     

Role of the medium in the cooxidation of cumene with benzyl alcohol

The kinetic parameters of the cooxidation of cumene with benzyl alcohol were measured in various solvents. The main influence of the medium on the reaction is determined by the polarity and nucleophilicity of the solvents. With increase in the per-volume fraction of the alcohol in the cooxidized mixture, the sensitivity of the process to the composition of the solution increases. The dependence of the kinetic cooxidation parameters on the empirical parameters of the solvents was analyzed, and it was shown that the medium substantially influences the activity of the peroxy radicals of the alcohol. The activity of the cumylperoxy radicals does not change appreciably.Translated from Teoreticheskaya i Éksperimental/naya Khimiya, Vol. 26, No. 5, pp. 606–610, September–October, 1990.     

Kinetics of the reactions of halide anions with carbocations: quantitative energy profiles for s(n)1 reactions

Rate constants for the reactions of Laser flash photolytically generated benzhydrylium ions (diarylcarbenium ions) with halide ions have been determined in various solvents, including neat and aqueous acetonitrile as well as some alcohols. Substitution of the rate constants into the correlation equation log k = s(N + E) yields the nucleophilicity parameters N for the halide ions in different solvents. Linear correlations with negative slopes are found between the nucleophilicity parameters N for Cl(-) and Br(-) in different solvents and the solvent ionizing powers Y of the corresponding solvents. Increasing halide solvation reduces the rates of carbocation/chloride combinations by approximately half as much as it increases the rates of ionizations of benzhydryl chlorides. Comparison of the solvent dependent nucleophilicity parameters N of halide anions and the nucleophilicity parameters N(1) for solvents yields a quantitative prediction of common ion rate depression, as demonstrated by the analysis of a variety of literature reported mass-law constants alpha. Combination of the rate constants for the reactions of benzhydrylium ions with halide ions (k(-)()(1)) reported in this work with the ionization constants of benzhydryl halides (k(1)) and the recently reported rate constants for the reactions of benzhydrylium ions with solvents (k(2)) yields complete quantitative free energy profiles for solvolysis reactions. The applicability of Hammond's postulate for interpreting solvolysis reactions can thus be examined quantitatively.     

Combination of ultrasound‐assisted ethyl chloroformate derivatization and switchable solvent liquid‐phase microextraction for the sensitive determination of l‐methionine in human plasma by GC–MS

A green and fast analytical method for the determination of l ‐methionine in human plasma is presented in this study. Preconcentration of the analyte was carried out by switchable solvent liquid phase microextraction after ethyl chloroformate derivatization reaction. Instrumental detection of the analyte was performed by means of gas chromatography–mass spectrometry. N,N‐Dimethyl benzylamine was used in the synthesis of switchable solvent. Protonated N,N‐dimethyl benzylamine volume, volume/concentration of sodium hydroxide, and vortex period were meticulously fixed to their optimum values. Besides, ethyl chloroformate, pyridine, and ethanol volumes were optimized in order to get high derivatization yield. After the optimization studies, limit of detection and quantitation values were attained as 3.30 and 11.0 ng/g, respectively, by the developed switchable solvent liquid phase microextraction gas chromatography–mass spectrometry method that corresponding to 76.7‐folds enhancement in detection power of the gas chromatography–mass spectrometry system. Applicability and accuracy of the switchable solvent liquid phase microextraction–gas chromatography–mass spectrometry method were also checked by spiking experiments. Percent recovery results were ranged from 97.8 to 100.5% showing that human plasma samples could be analyzed for its l ‐methionine level by the proposed method.     

Correlation of the rates of solvolysis of cyclopropylcarbinyl and cyclobutyl bromides using the extended Grunwald-Winstein equation

The reactions of cyclopropylcarbinyl bromide (1) and cyclobutyl bromide (2) in hydroxylic solvents proceed with both solvolysis and rearrangement. Depending on the solvent, the reactions of 1 are 10-120 times faster than those of 2, and both are faster than the previously studied allylcarbinyl bromide (3). Specific rates are reported for the reactions of 2 proceeding to solvolysis products and 3. Reactions of 1 proceed to solvolysis products and both 2 and 3; since 2 slowly undergoes further solvolysis, specific rates are obtained by a modified Guggenheim treatment. The two sets of specific rates are analyzed using the extended Grunwald-Winstein equation to give sensitivities toward changes in solvent nucleophilicity of 0.42 for 1 and 0.53 for 2 and corresponding sensitivities toward changes in solvent ionizing power of 0.75 and 0.94. A mechanism is proposed involving a rate-determining ionization with an appreciable nucleophilic solvation of the incipient carbocation.     

Mechanisms of solvolyses of acid chlorides and chloroformates. Chloroacetyl and phenylacetyl chloride as similarity models

[reaction: see text] Rate constants and product selectivities (S = ([ester product]/[acid product]) x ([water]/[alcohol solvent]) are reported for solvolyses of chloroacetyl chloride (3) at -10 degrees C and phenylacetyl chloride (4) at 0 degrees C in ethanol/ and methanol/water mixtures. Additional kinetic data are reported for solvolyses in acetone/water, 2,2,2-trifluoroethanol(TFE)/water, and TFE/ethanol mixtures. Selectivities and solvent effects for 3, including the kinetic solvent isotope effect (KSIE) of 2.18 for methanol, are similar to those for solvolyses of p-nitrobenzoyl chloride (1, Z = NO(2)); rate constants in acetone/water are consistent with a third-order mechanism, and rates and products in ethanol/ and methanol/water mixtures can be explained quantitatively by competing third-order mechanisms in which one molecule of solvent (alcohol or water) acts as a nucleophile and another acts as a general base (an addition/elimination reaction channel). Selectivities increase for 3 as water is added to alcohol. Solvent effects on rate constants for solvolyses of 3 are very similar to those of methyl chloroformate, but acetyl chloride shows a lower KSIE, and a higher sensitivity to solvent-ionizing power, explained by a change to an S(N)2/S(N)1 (ionization) reaction channel. Solvolyses of 4 undergo a change from the addition/elimination channel in ethanol to the ionization channel in aqueous ethanol (<80% v/v alcohol). The reasons for change in reaction channels are discussed in terms of the gas-phase stabilities of acylium ions, calculated using Gaussian 03 (HF/6-31G(d), B3LYP/6-31G(d), and B3LYP/6-311G(d,p) MO theory).     

Kinetics and Mechanism of Monomolecular Heterolysis of Commercial Organohalogen Compounds: XXX.1 Correlation Analysis of Solvation Effects in Heterolysis of tert-Butyl Chloride

Quantitative analysis of the effect of solvent parameters on the rate of heterolysis of tert-butyl chloride was performed; the reaction rate is fairly described by the polarity, polarizability, and electrophilicity parameters or by the ionizing ability parameter, while the nucleophilicity of the solvent has no rate effect. A negative effect of nucleophilic solvation was revealed in protic solvents.     

Degradation products generated by sonication of benzyl alcohol, a sample preparation solvent for the determination of residual solvents in pharmaceutical bulks, on capillary gas chromatography

Benzyl alcohol used as the sample preparation solvent in the determination of residual solvents in pharmaceutical bulks yielded benzene, toluene, and benzaldehyde on capillary gas chromatography (GC) by sonication. The factors responsible for compounds generated are discussed. The quality of benzyl alcohol and the type of sonicator were not involved in the generation of benzene, toluene, and benzaldehyde, whereas matrix contributions were observed. The degradation profiles of benzyl alcohol and its analogous compounds obtained by pyrolysis-GC/mass spectrometric analysis were similar to those obtained by sonication, suggesting that benzyl alcohol is degraded by the high local heat generated by sonication. Consequently, no matter how long it may take to dissolve bulk substances in benzyl alcohol completely, we do not recommend the use of a sonicator in sample preparation for the determination of residual solvents in pharmaceutical bulks.     

Ionizing power and nucleophilicity in water in oil AOT-based microemulsions

A study was carried out on the solvolysis of substituted phenyl chloroformates in AOT/isooctane/water microemulsions. (AOT is the sodium salt of bis(2-ethyhexyl)sulfosuccinate.) The results obtained have been interpreted by taking into account the distribution of the chloroformates between the continuous medium and the interface of the microemulsions, where the reactions take place. The values obtained for the rate constant in the interface, k(i), decreases as the water content of the microemulsions increases, as a consequence of the decrease in its nucleophilic capacity. This behavior is consistent with a rate-determining step of water addition to the carbonyl group. The values of k(i) allow us to obtain the slopes of the Hammett correlations at the interface of the microemulsions, rho = 2.25, whose values are greater than those obtained in an aqueous medium, rho = 0.82. This increase in the Hammett slope is similar to that observed in ethanol/water mixtures and is a consequence of a variation in the structure of the transition state of the reaction where there is a smaller extension of the expulsion of the leaving group. The values of the rate constants at the interface of the microemulsions have allowed us, by means of the Grunwald-Winstein equation, to obtain the solvent ionizing power and the nucleophilicity of the solvent. The values obtained for Y(Cl) increase together with the water content of the microemulsion, whereas the values of N(T) decrease. These variations are a consequence of the interaction between the AOT headgroups and the interfacial water, where the water molecules act like electronic acceptors. The intensity of this interaction is greater if the system has a small water content, which explains the variation of Y(Cl) and N(T).