Untethered 4,1,2-MC(2)B(10) supraicosahedral metallacarboranes, their C,C'-dimethyl 4,1,6-, 4,1,8- and 4,1,12-MC(2)B(10) analogues, and DFT study of the (4,)1,2- to (4,)1,6-isomerisations of C(2)B(11) carboranes and MC(2)B(10) metallacarboranes

Reduction of the tethered carborane 1,2-μ-(CH(2)SiMe(2)CH(2))-1,2-closo-C(2)B(10)H(10) followed by metallation with {CpCo} or {(p-cymene)Ru} fragments affords both C,C'-dimethyl 4,1,2-MC(2)B(10) and 4,1,6-MC(2)B(10) species. DFT calculations indicate that the barriers to isomerisation of both 4-Cp-4,1,2-closo-CoC(2)B(10)H(12) and 4-(η-C(6)H(6))-4,1,2-closo-RuC(2)B(10)H(12) to their respective 4,1,6-isomers are too high for this to be the origin of the unexpected formation of 4,1,6-MC(2)B(10) products (in marked contrast to the related isomerisation of 1,2-closo-C(2)B(11)H(13) to 1,6-closo-C(2)B(11)H(13)), and, indeed, the 4,1,2-species are recovered unchanged from refluxing toluene. Equally, the DFT-calculated profile for the isomerisation of [7,8-nido-C(2)B(10)H(12)](2-) to [7,9-nido-C(2)B(10)H(12)](2-) suggests that the unexpected formation of 4,1,6-metallacarboranes is unlikely to result from isomerisation of a reduced (nido) carborane following desilylation. Instead, the source of the 4,1,6-MC(2)B(10) compounds is traced to desilylation of 1,2-μ-(CH(2)SiMe(2)CH(2))-1,2-closo-C(2)B(10)H(10) by Li or Na prior to reduction. The supraicosahedral metallacarboranes 1,8-Me(2)-4-Cp-4,1,8-closo-CoC(2)B(10)H(10), 1,12-Me(2)-4-Cp-4,1,12-closo-CoC(2)B(10)H(10) and 1,12-Me(2)-4-(p-cymene)-4,1,12-closo-RuC(2)B(10)H(10) are also reported with all new species characterised both spectroscopically and crystallographically.     

The first 4,1,10-MC2B10 supraicosahedral metallacarboranes and a route to previously inaccessible 4,1,12-ruthenium arene species

Reduction of 1,12-closo-C2B10H12 or its C,C-dimethyl analogue with sodium in liquid ammonia followed by metallation with {CpCo}2+, {(arene)Ru}2+ or {(dppe)Ni}2+ fragments affords the first examples of 4,1,10-MC2B10 species; thermolysis of these yields the appropriate 4,1,12-MC2B10 isomers, unavailable for (arene)Ru metallacarboranes by similar thermolysis of known 4,1,6-MC2B10 compounds.     

The synthesis and characterisation of 4,1,2-MC2B10 metallacarboranes

Reduction of the tethered carborane 1,2-(CH2)3-1,2-closo-C2B10H10 followed by treatment with CoCl2/NaCp, [(p-cymene)RuCl2]2(p-cymene=C6H4MeiPr-1,4), (PMe2Ph)2PtCl2 or (dppe)NiCl2(dppe=Ph2PCH2CH2PPh2) affords reasonable yields of the new 13-vertex metallacarboranes 1,2-(CH2)3-4-Cp-4,1,2-closo-CoC2B10H10 (1), 1,2-(CH2)3-4-(p-cymene)-4,1,2-closo-RuC2B10H10 (2), 1,2-(CH2)3-4,4-(PMe2Ph)2-4,1,2-closo-PtC2B10H10 (3) and 1,2-(CH2)3-4,4-(dppe)-4,1,2-closo-NiC2B10H10 (4), respectively. All compounds were characterised spectroscopically and crystallographically. The cobalt and ruthenium species 1 and 2 have Cs symmetry in both solution and the solid state, having henicosahedral cage structures featuring a trapezoidal C1C2B9B5 face. The platinum and nickel compounds 3 and 4 have asymmetric docosahedral cage structures in the crystal (the more so for 4 than for 3) although both appear, by 11B and 31P NMR spectroscopy, to have Cs symmetry in solution. Low-temperature experiments on the more soluble platinacarborane could not freeze out the diamond-trapezium-diamond fluctional process that we assume is operating in solution, and we therefore conclude that this process has a relatively low activation barrier, probably <35 kJ mol-1.     

Unexpectedly facile isomerisation of [7,10-Ph2-7,10-nido-C2B10H10]2- to [7,9-Ph2-7,9-nido-C2B10H10]2-

The 2e-reduction of 1,12-Ph2-1,12-closo-C(2)B(10)H(10) followed by oxidation or metallation gives products that arise from [7,9-Ph2-7,9-nido-C(2)B(10)H(10)](2-), formed by unexpectedly facile isomerisation of the kinetic 7,10-isomer: the 4,1,6-MC(2)B(10) compounds which result are progressively isomerised to 4,1,8- and 4,1,12-isomers for M = {CpCo} but to an equilibrium mixture of 4,1,8- and 4,1,12-isomers for M = {(arene)Ru}.     

Macropolyhedral boron-containing cluster chemistry. Synchrotron X-ray structural analysis of [(PMe2Ph)2Pd2B16H20(PMe2Ph)2] and [(PMe2Ph)3Pt2B16H18(PMe2Ph)]: models of intermediates to more condensed metallaboranes from the [(PMe2Ph)2PtB8H12] thermolysis system

Thermolyses of [(PMe2Ph)2PdB8H12] and [(PMe2Ph)2PtB8H12] respectively yield eighteen-vertex [(PMe2Ph)2Pd2B16H20(PMe2Ph)2] and [(PMe2Ph)3Pt2B16H18(PMe2Ph)], which exhibit structure models for probable successive precursive intermediates for the more condensed macropolyhedral metallaboranes [(PMe2Ph)4Pt3B14H16], [(PMe2Ph)2Pt2B12H16] and [(PMe2Ph)2Pt2B16H15(C6H4Me)(PMe2Ph)] that have previously been reported as products from [(PMe2Ph)2PdB8H12] thermolyses.     

Synthetic, spectroscopic, computational and structural studies of some 13-vertex ruthenacarboranes

Reduction of 1,2-closo-C2B10H12 followed by treatment with [RuCl2(p-cymene)]2(p-cymene = C6H4MeiPr-1,4) affords the 13-vertex ruthenacarborane 4-(p-cymene)-4,1,6-closo-RuC2B10H12, characterised both spectroscopically and, in two crystalline forms, crystallographically. Although asymmetric in the solid state, having a docosahedral cage architecture with cage C atoms at vertices 1 and 6, this species clearly has Cs symmetry on the NMR timescale at room temperature. However, the fluctional process in operation can be arrested at low temperature, and an activation energy of 43.1 kJ mol(-1) is estimated. A computational study of the related species 4-(eta-C6H6)-4,1,6-closo-RuC2B10H12 reveals that the fluctionality is due to a double diamond-square-diamond process, first suggested by Hawthorne et al for the analogous CpCo species. These calculations yield an activation energy of 40.4 kJ mol(-1), in excellent agreement with that derived from experiment. Reduction of 1,2-Ph(2)-1,2-closo-C2B10H10 followed by treatment with [RuCl2(eta-C6H6)]2 or [RuCl2(p-cymene)]2 yields the analogous species 1,6-Ph2-4-(eta-C6H6)-4,1,6-closo-RuC2B10H10 and 1,6-Ph2-4-(p-cymene)-4,1,6-closo-RuC2B10H10, respectively. These C,C-diphenyl compounds were again studied spectroscopically and crystallographically, the p-cymene species again showing two crystalline modifications. In contrast to their CpCo and Cp*Co analogues all three ruthenacarboranes do not undergo isomerisation in refluxing toluene.     

Synthesis, reactivity and structural studies of carboranyl thioethers and disulfides

The equimolar reaction of 1-SH-2-R-1,2-closo-C2B10H10(R=Me, H, Ph) with KOH in ethanol produces the thiolate species [1-S-2-R-1,2-closo-C2B10H10]-. These react with iodine to give the disulfide bridged dicluster (1-S-2-R-1,2-closo-C2B10H10)2(R=H, Me, Ph) compounds as analytically pure, white and air-stable solids in high yield. Synthesis of monothioether bridged species is synthetically more difficult. In fact three procedures have been tested to obtain the thioether bridged dicluster compounds (2-R-1,2-closo-C2B10H10)2S (R=Me, H, Ph) but only (2-Me-1,2-closo-C2B10H10)2S was successfully synthesized and characterized. Attempts to produce mixed compounds (1-R-1,2-closo-C2B10H10)S(1-R'-1,2-closo-C2B10H10), R not=R', were unsuccessful. Deboronation reaction of this dicarboranylthioether lead, depending on the reaction conditions, to monoanionic [(2-Me-1,2-closo-C2B10H10)S(8-Me-7,8-nido-C2B9H10)]- or dianionic [(8-Me-7,8-nido-C2B9H10)2S]2- sulfur bridge anions. Deboronation of carboranyl disulfides gave the corresponding dianionic [(7-S-8-R-7,8-nido-C2B9H10)2]2-(R=H, Me, Ph) species. This reaction was very dependent, however, on the reaction conditions. With slight variation of the reaction conditions, splitting of the S-S bond leading to the thiolate species with retention of the closo cluster was also found. Carboranyl disulfides (1-S-2-R-1,2-closo-C2B10H10)2(R=H, Me, Ph) do not lead to thiosulfinates R-S(O)-S-R' by oxidation with H2O2 or I2 as organic disulfides do. This behaviour is attributed to the presence of the sulfur atom directly bonded to the carbon cluster that produces electronic transfer from the filled orbitals on the sulfur atom into the cage LUMO (largely located on the cage Cc-Cc bond). This causes a depletion of electron density on the sulfur, thence impairing sulfur oxidation, and facilitating S-S breaking. Crystal structures of monothioethers (2-Me-1,2-closo-C2B10H10)2S, [NMe4][(2-Me-1,2-closo-C2B10H10)S(8-Me-7,8-nido-C2B9H10)](the first example reported in the literature of a two cluster compound incorporating the closo C2B10 and the nido[C2B9]- moieties linked by a one member spacer) and disulfides (1-S-1,2-closo-C2B10H11)2, (1-S-2-Me-1,2-closo-C2B10H10)2, (1-S-2-Ph-1,2-closo-C2B10H10)2 are reported which support the behaviour of these species.     

Macropolyhedral boron-containing cluster chemistry. Novel intercluster linkages from the reaction of [Pt(cod)Cl2] and [PtMe2(PMe2Ph)2] with 6,6'-(B10H13)2O

6,6'-(B10H13)2O with [Pt(cod)Cl2] gives the [(B10H13OB10H11)Pt-{(B10H10OB10H12)]2- anion in which, uniquely, the units are held together by a B-O-B linkage in combination with a B-B linkage; with [PtMe2(PMe2Ph)2] it gives [(PMe2Ph)2PtB10H10-O,H-B10H11Pt(PMe2Ph)] in which, uniquely, the units are held together by an unsupported hydrogen-to-metal linkage as well as a B-O-B linkage.     

New 13-vertex metallacarborane sandwich compounds; synthetic and structural studies

Reduction of 1,12-closo-C2B10H12 followed by reaction with the appropriate metal halide and metathesis with either [K(18-crown-6)]Br or [BTMA]Cl ([BTMA] = [C6H5CH2N(CH3)3]+) affords isolable salts of the supraicosahedral metallacarborane sandwich anions [4,4-M-(1,10-closo-C2B10H12)2]n- in moderate to good yield. Compounds prepared are [BTMA][4,4-Co-(1,10-closo-C2B10H12)2] ( 1), [K(18-crown-6)][4,4-Co-(1,10-closo-C2B10H12)2] ( 2), [K(18-crown-6)]2[4,4-Ni-(1,10-closo-C2B10H12)2] ( 3), [K(18-crown-6)]2[4,4-Fe-(1,10-closo-C2B10H12)2] ( 4), [BTMA]2[4,4-Fe-(1,10-closo-C2B10H12)2] ( 5) and [K(18-crown-6)]2[4,4-Ti-(1,10-closo-C2B10H12)2] ( 6). Oxidation of the iron(II) species 4 and 5 with FeCl3 in THF generates the iron(III) analogues [K(18-crown-6)][4,4-Fe-(1,10-closo-C2B10H12)2] ( 7) and [BTMA][4,4-Fe-(1,10-closo-C2B10H12)2] ( 8), respectively. All diamagnetic compounds were characterised spectroscopically and the structures of 1, 3, 4, 6, 7 and 8 were established by single crystal X-ray diffraction. All anions have the anticipated cluster structures with two docosahedral 13-vertex cages joined at the central metal atom (the common degree-six vertex 4). Carbon atoms occupy the degree-four vertex 1 and the degree-five vertex 10. 11B NMR spectroscopy suggests the anions have, on the NMR timescale, C2h symmetry in solution at room temperature, consistent with free rotation, or at least substantial libration, of cage units about the long molecular axis. In the solid state the relative conformations of the two cages may be rationalised by simple bonding arguments, the single exception being the conformation of 4, in which both cages are subject to directional B-H...K+ interactions to the [K(18-crown-6)]+ counterion. The salts 3, 6 and 7 also show B-H...K+ interactions but involving one cage only.     

Synthesis, reactivity and structural studies of selenide bridged carboranyl compounds

Reaction of the lithium salt Li[1-R-1,2-closo-C(2)B(10)H(10)] with selenium under mild conditions, followed by hydrolysis gave the diselenide compound (1-Se-2-R-1,2-closo-C(2)B(10)H(10))(2) in contrast to the well-reported mercapto compounds 1-SH-2-R-1,2-closo-C(2)B(10)H(10) obtained using a similar synthetic procedure. Details for the preparation and X-ray structural characterisation of the new compounds (2-Me-1,2-closo-C(2)B(10)H(10))(2)Se, (1-Se-2-R-1,2-closo-C(2)B(10)H(10))(2) (R = Me, Ph, ) are specified. To further explore the mechanism of the dimerization reaction, the complex [Au(1-Se-2-Me-1,2-closo-C(2)B(10)H(10))(PPh(3))] was synthesized, confirming the existence of the intermediate Li[1-Se-2-R-1,2-closo-C(2)B(10)H(10)] at the early stages of the reaction before selenium oxidation. Theoretical calculations and cyclic voltammetry (CV) studies were carried out to compare the bonding nature of the sulfur and the selenium analog compounds. It was determined that diselenides have a higher tendency to reduce with respect to the disulfides and all chalcogen atoms were found to be positively charged.     

The capture of dioxygen, carbon monoxide and sulfur dioxide by [(PMe2Ph)4Pt2B10H10

The metal-metal bond in [(PMe2Ph)4Pt2B10H10], from reaction of [PtCl2(PMe2Ph)2] or PMe2Ph with [(PMe2Ph)2PtB10H12], very readily, and readily reversibly, takes up atmospheric O2 to give the peroxidic dioxygen-dimetallaborane complex [(PMe2Ph)4(O2)Pt2B10H10], which has Pt-Pt 2.7143(3), Pt-O 2.141(4) and 2.151(4), and O-O 1.434(6)A. The {Pt2O2} bonding mode is fluxional. Compound irreversibly takes up CO to give the bridging-carbonyl-dimetallaborane complex [(PMe2Ph)4(CO)Pt2B10H10] which has a CO vector radial to the cluster, with Pt-Pt 2.7488(3), Pt-C 2.104(6) and 2.113(6), and C-O 1.163(6)A; CO readily displaces O2 from to give 3. SO2 similarly reacts with either or to give [(PMe2Ph)4(SO2)Pt2B10H10], which has tetrahedral sulfur, with Pt-Pt 2.8194(4), Pt-S 2.350(2) and 2.381(3), and S-O 1.470(8)A and 1.477(9)A.     

Reversible capture of small molecules on bimetallaborane clusters: synthesis, structural characterization, and photophysical aspects

Metallaborane compounds containing two adjacent metal atoms, [(PMe(2)Ph)(4)MM'B(10)H(10)] (where MM' = Pt(2), 1; PtPd, 7; Pd(2), 8), have been synthesized, and their propensity to sequester O(2), CO, and SO(2) and to then release them under pulsed and continuous irradiation are described. Only [(PMe(2)Ph)(4)Pt(2)B(10)H(10)], 1, undergoes reversible binding of O(2) to form [(PMe(2)Ph)(4)(O(2))Pt(2)B(10)H(10)] 3, but solutions of 1, 7, and 8 all quantitatively take up CO across their metal-metal vectors to form [(PMe(2)Ph)(4)(CO)Pt(2)B(10)H(10)] 4, [(PMe(2)Ph)(4)(CO)PtPdB(10)H(10)] 10, and [(PMe(2)Ph)(4)(CO)Pd(2)B(10)H(10)] 11, respectively. Crystallographically determined interatomic M-M distances and infrared CO stretching frequencies show that the CO molecule is bound progressively more weakly in the sequence {PtPt} > {PtPd} > {PdPd}. Similarly, SO(2) forms [(PMe(2)Ph)(4)(SO(2))Pt(2)B(10)H(10)] 5, [(PMe(2)Ph)(4)(SO(2))PtPdB(10)H(10)] 12, and [(PMe(2)Ph)(4)(SO(2))Pd(2)B(10)H(10)] 13 with progressively weaker binding of the SO(2) molecule. The uptake and release of gas molecules are accompanied by changes in their absorption spectra. Nanosecond transient absorption spectroscopy clearly shows that the O(2) and CO molecules are liberated from the bimetallic binding site with high quantum yields of about 0.6. For 3, in addition to dioxygen release in the triplet ground state, singlet oxygen O(2)((1)Δ(g)) was also detected with a quantum yield <0.01. In most cases, the release and rebinding of the gas molecules can be cycled with little photodegradation of the compounds. Femtosecond transient absorption spectroscopy further reveals that the photorelease of the O(2) and CO molecules, from 3 and 4 respectively, is an ultrafast process taking place on a time scale of tens of picoseconds. For SO(2), the release is even faster (<1 ps), but only in the case of mixed metal PtPd adducts, most probably because of the metal-metal bonding asymmetry in the mixed metal clusters; for the corresponding symmetric Pt(2) and Pd(2) adducts, 5 and 13, the release of SO(2) is significantly slower (>1 ns). All these compounds may have potential to serve as light-triggered local and instantaneous sources of the studied gases.     

Catalytic P--H activation by Ti and Zr catalysts

Catalytic dehydrocoupling of phosphines was investigated using the anionic zirconocene trihydride salts [Cp*2Zr(mu-H)3Li]3 (1 a) or [Cp*2Zr(mu-H)3K(thf)4] (1 b), and the metallocycles [CpTi(NPtBu3)(CH2)4] (6) and [Cp*M(NPtBu3)(CH2)4] (M=Ti 20, Zr 21) as catalyst precursors. Dehydrocoupling of primary phosphines RPH2 (R=Ph, C6H2Me3, Cy, C10H7) gave both dehydrocoupled dimers RP(H)P(H)R or cyclic oligophosphines (RP)n (n=4, 5) while reaction of tBu3C6H2PH2 gave the phosphaindoline tBu2(Me2CCH2)C6H2PH 9. Stoichiometric reactions of these catalyst precursors with primary phosphines afforded [Cp*2Zr((PR)2)H][K(thf)4] (R=Ph 2, Cy 3, C6H2Me3 4), [Cp*2Zr((PPh)3)H][K(thf)4] (5), [CpTi(NPtBu3)(PPh)3] (7) and [CpTi(NPtBu3)(mu-PHPh)]2 (8), while reaction of 6 with (C6H2tBu3)PH2 in the presence of PMe3 afforded [CpTi(NPtBu3)(PMe3)(P(C6H2tBu3)] (10). The secondary phosphines Ph2PH and (PhHPCH2)2CH2 also undergo dehydrocoupling affording (Ph2P)2 and (PhPCH2)2CH2. The bisphosphines (CH2PH2)2 and C6H4(PH2)2 are dehydrocoupled to give (PCH2CH2PH)2)(12) and (C6H4P(PH))2 (13) while prolonged reaction of 13 gave (C6H4P2)(8) (14). The analogous bisphosphine Me2C6H4(PH)2 (17) was prepared and dehydrocoupling catalysis afforded (Me2C6H2P(PH))2 (18) and subsequently [(Me2C6H2P2)2(mu-Me2C6H2P2)]2 (19). Stoichiometric reactions with these bisphosphines gave [Cp*2Zr(H)(PH)2C6-H4][Li(thf)4] (22), [CpTi(NPtBu3)(PH)2C6H4]2 (23) and [Cp*Ti(NPtBu3)(PH)2C6H4] (24). Mechanistic implications are discussed.     

Uncommon coordination behaviour of P(S) and P(Se) units when bonded to carboranyl clusters: experimental and computational studies on the oxidation of carboranyl phosphine ligands

Oxidation of closo-carboranyl diphosphines 1,2-(PR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr) and closo-carboranyl monophosphines 1-PR(2)-2-R'-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr, Cy; R'=Me, Ph) with hydrogen peroxide, sulfur and elemental black selenium evidences the unique capacity of the closo-carborane cluster to produce uncommon or unprecedented P/P(E) (E=S, Se) and P=O/P=S chelating ligands. When H(2)O(2) reacts with 1,2-(PR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr), they are oxidized to 1,2-(OPR(2))(2)-1,2-closo-C(2)B(10)H(10) (R=Ph, iPr). However, when S and Se are used, different reactivity is found for 1,2-(PPh(2))(2)-1,2-closo-C(2)B(10)H(10) and 1,2-(PiPr(2))(2)-1,2-closo-C(2)B(10)H(10). The reaction with sulfur produces mono- and dioxidation products for R=Ph, whereas Se produces the mono-oxidation product only. For R=iPr, only monooxidation takes place with S, and the second C(c)-PiPr(2) bond breaks to yield 1-SPiPr(2)-1,2-closo-C(2)B(10)H(11). When Se is used, only 1-SePiPr(2)-1,2-closo-C(2)B(10)H(11) is formed. The potential of the mono-chalcogenide carboranyl diphosphines 1-EPPh(2)-2-PPh(2)-1,2-closo-C(2)B(10)H(10) (E=S, 9; Se, 15) to behave as unsymmetric chelating bidentate ligands was studied for different metal complexes, different solvents and in the solid state. Dechalcogenation takes place in each case. Computational studies provided information on the P=E (E=S, Se) bonds. Steric effects block the bonding ability of the P=E group due to interactions between the chalcogen and the neighbouring hydrogen atoms (three from the phenyl rings and one from the carborane cluster). The electronic effects originate from the strongly electron-withdrawing character of the closo carborane cluster, which polarizes the P=E (E=S, Se) bond towards the phosphorus atom. As a consequence, the E atom is the electron-poor site and the P atom the electron-rich site in the P=E bond.     

Synthesis and reactivity of cobalt boryl complexes

The reaction between [Co(PMe3)4] and B2(4-Mecat)2 (4-Mecat = 1,2-O2-4-MeC6H3) or between [Co(PMe2Ph)4] and B2(cat)2 (cat = 1,2-O2C6H4) affords the paramagnetic Co(II) bisboryl complexes [Co(PMe3)3[B(4-Mecat)]2] and [Co(PMe2Ph)3{B(cat)]2] respectively, both of which have been structurally characterised. ESR data and preliminary diboration and boryl transfer reactivity studies are also presented. The reaction between [CoMe(PMe3)4] and B2(cat)2 affords the Co(I) monoboryl complex [Co(PMe3)4[B(cat)]].     

Polyhedral metallaheteroborane chemistry. Synthesis, spectroscopy, structure and dynamics of eleven-vertex {RhNB(9)} and {PtCB(9)} metallaheteroboranes

Reaction between [RhCl(PPh(3))(3)] and the [nido-6-NB(9)H(11)](-) anion in CH(2)Cl(2) yields orange eleven-vertex [8,8-(PPh(3))(2)-nido-8,7-RhNB(9)H(11)]. Reaction of the [nido-6-CB(9)H(12)](-) anion with [cis-PtCl(2)(PMe(2)Ph)(2)] in methanol affords yellow eleven-vertex [9-(OMe)-8,8-(PMe(2)Ph)(2)-nido-8,7-PtCB(9)H(10)], which is also formed from the reaction of MeOH with [8,8-(PPh(3))(2)-nido-8,7-PtCB(9)H(10)]. Both compounds have been characterised by single-crystal X-ray diffraction analysis and examined by NMR spectroscopy and have structures based on eleven-vertex nido-type geometries, with the metal centre and the heteroatoms in the adjacent (8)- and (7)-positions on the pentagonal open face. The metal-to-heteroborane bonding sphere of is fluxional, with a DeltaG(double dagger) value of 48.4 kJ mol(-1). DFT calculations on the model compounds [8,8-(PH(3))(2)-nido-8,7-RhNB(9)H(11)] and [8,8-(PH(3))(2)-nido-8,7-RhSB(9)H(10)] have been carried out to define the fluxional process and the intermediates involved.     

Macropolyhedral boron-containing cluster chemistry. The reaction of B16H20 and B14H18 with [PtMe2(PMe2Ph)2] to give [(PMe2Ph)2PtB16H17Me] and [(PMe2Ph)2PtB14H16

Structurally characterised 17-vertex [(PMe2Ph)2PtB16H17Me] 3 is obtained, albeit in low yield, by platination of 16-vertex B16H20 1 using [PtMe2(PMe2Ph)2] under mild conditions. Platination has occurred on the {B10} subcluster of 1, interesting in that B16H20 itself deprotonates on the {B8} subcluster: the reference 16-vertex [B16H19]- anion 1a, prepared by deprotonation of 1 with 1,8-bis(dimethylamino)naphthalene, is also structurally characterised. [PtMe2(PMe2Ph)2] with 14-vertex B14H18 2 similarly gives a low yield of 15-vertex [(PMe2Ph)2PtB14H16] 5, of formulation and structure substantiated by DFT calculations.     

Coordination-driven self-assembly, structures, and dynamic properties of diplatinum hexatriynediyl and butadiynediyl complexes in which the sp carbon chains are shielded by sp3 carbon chains: towards endgroup-endgroup interactions

Sequential reactions of trans-(C6F5)(p-tol3P)2Pt(C[triple chemical bond]C)3SiEt3 (PtC6SiEt3) with nBu4N+ F(-) (THF/methanol), PtCl, KPF6/tBuOK, and CuCl give trans,trans-[(C6F5){(p-tol3P)2}Pt(C[triple chemical bond]C)3Pt{(Pp-tol3)2}(C6F5)] (PtC6Pt) in 95 % yield on multigram scales. Reactions of PtC6Pt and Ar2P(CH2)mPAr2 afford substitution products trans,trans-[(C6F5){(Ar2P(CH2)mPAr2)}Pt(C[triple chemical bond]C)3Pt{(Ar2P(CH2)mPAr2)}(C6F5)] (PtC6Pt-m/Ar; m/Ar=8/p-tol, 78 %; 10/Ph, 82 %; 11/Ph, 69 %; 12/Ph, 57 %; 14/p-tol, 57 %; 14/p-C6H4-tBu, 71 %), in which the diphosphines span the square planar platinum endgroups. An analogous reaction with PEt3 gives a tetrakis PEt3 complex Pt'C6Pt' (72 %). The crystal structures of PtC6Pt, Pt'C6Pt', PtC6Pt-10/Ph, PtC6Pt-11/Ph, and PtC6Pt-14/p-tol or solvates thereof are compared. In PtC6Pt, the endgroups can avoid van der Waals contact, and define angles of 0 degrees . In PtC6Pt-14/p-tol, the sp3 chains twist around the sp chain in a chiral double-helical motif, with an endgroup/endgroup angle of 189 degrees . The sp3 chains are too short to adopt analogous conformations in the other complexes, but laterally shield the sp chain. NMR spectroscopy shows that the helical enantiomers of PtC6Pt-14/p-tol rapidly interconvert in solution at low temperature. A crystal structure of PtC4Pt shows endgroups that are in van der Waals contact and define an angle of 41 degrees . Reactions with Ar2P(CH2)8PAr2 give PtC4Pt-8/Ar (Ar=Ph, 53 %; p-tol, 87 %). Low-temperature NMR spectroscopy establish non-helical chiral conformations. Electrochemical oxidations of the diplatinum complexes are analyzed, the reversibilities of which decrease with increasing sp chain length.     

Metallaborane reaction chemistry. A facile and reversible dioxygen capture by a B-frame-supported bimetallic: structure of [(PMe2Ph)4(O2)Pt2B10H10

[(PMe2Ph)4Pt2B10H10] reversibly takes up atmospheric dioxygen to give the fluxional dioxygen-dimetallaborane complex [(PMe2Ph)4(O2)Pt2B10H10], which has Pt-Pt 2.7143(3), Pt-O 2.141(4) and 2.151(4) and O-O 1.434(6)A.     

Metallaborane reaction chemistry. A predicted and found tailored facile and reversible capture of SO2 by a B-frame-supported bimetallic: structures of [(PMe2Ph)2PtPd(phen)B10H10] and [(PMe2Ph)2Pt(SO2)Pd(phen)B10H10

The formally closo twelve-vertex {ortho-M2B10} dimetallaborane system has been predictively tailored for reversible uptake of SO2 across the metal-metal bond, as exemplified by the formation of [(PMe2Ph)2Pt(SO2)Pd(phen)B10H10] from [(PMe2Ph)2PtPd(phen)B10H10].