Adhesive properties of ethylene and vinyl acetate copolymers

Surface properties of ethylene and vinyl acetate copolymers (EVAs) are considered depending on their composition and history of surface formation. The kinetics of structural transformations in the near-surface layers of copolymers is investigated. Relaxation times and the equilibrium state of the EVA surface are determined. The orrelation dependence between the surface energy of copolymers and their adhesive properties for substrates of different natures is constructed.     

Thermal degradation of some cross-linked copolymers of vinyl acetate

Pyrolysis in combination with gas chromatography and thermogravimetry were used to study the thermal degradation of some cross-linked copolymers of vinyl acetate with divinylbenzene and ethylstyrene. The temperature was varied in the range 200° and 800°. The thermal decomposition products of the analyzed copolymers vary greatly, both with the temperature and with the composition of the samples. The experimental data obtained led to the assumption of a complex degradation mechanism, evidenced by the overlapping processes and the unexpected contents of certain evolved compounds as a function of composition.

---

Zusammenfassung Pyrolyse in Kombination mit Gaschromatographie und Thermogravimetrie wurde zu Untersuchung des thermischen Abbaus einiger vernetzter Kopolymere von Vinylacetat mit Divinylbenzol und Äthylstyrol herangezogen. Die Temperatur wurde im Bereich von 200–800° variiert. Die thermischen Zersetzungsprodukte sind sehr unterschiedlich, abhängig von der Temperatur und der Zusammensetzung der Probe. Aus den experimentellen Daten wird auf einen komplexen Zersetzungsmechanismus geschlossen, der durch die Überlappung der Prozesse und durch das auftreten bestimmter unerwarteter Verbindungen in Abhängigkeit von der Zusammensetzung bestätigt wird.

---

. 200–800°. , . , .

     

Thermal degradation of copolymers from vinyl acetate and vinyl alcohol

The thermal degradation of poly(vinyl acetate) (PVA), poly(vinyl alcohol) (PVAL), vinyl acetate-vinyl alcohol (VAVAL), vinyl acetate-vinyl-3,5-dinitrobenzoate (VAVDNB) and vinyl alcohol-3,5-dinitrobenzoate (VALVDNB) copolymers have been studied using differential thermal analysis (DTA) and thermogravimetry (TG) under isothermal and dynamic conditions in nitrogen. Thermal analysis indicates that PVA and PVAL are thermally more stable than VAVAL copolymers, being PVAL the most stable polymer. The presence of small amounts of vinyl-3,5-dinitrobenzoate (VDNB) in PVA or PVAL produces a marked decrease in the thermal stability of both homopolymers, being VALVDNB copolymers the less stable materials. The apparent activation energy of the degradative process was determined by the Kissinger and Flynn-Wall methods which agree well.     

Sequence distributions of vinyl chloride-vinyl acetate and vinyl chloride-vinyl propionate copolymers

¹³C-NMR spectroscopy was used in a detailed study of vinyl chloride-vinyl acetate and vinyl chloride-vinyl propionate copolymers. The NMR spectra of the methylene carbon region showed three split peaks whose intensities changed with composition of the copolymers. These peaks were assigned to diad sequences and the observed diad concentrations were in good agreement with the calculated concentrations in terms of the random copolymerization theory. For the methine carbon spectra of vinyl acetate or vinyl propionate units in the copolymers the degree of splitting of the signal was improved by the addition of tris(1,1,1,2,2,3,3-heptafluro-7,7-diemthyl-1,4,6-octanedinata)-praseodymium as a shift reagent. Four peaks assigned to the methine carbon were interpreted in terms of triad sequence distribution and tacticity.     

Thermoxidative degradation of vinyl alcohol/vinyl acetate copolymers. IV. Statistical copolymers

The thermoxidative degradation of vinyl acetate/vinyl alcohol statistical copolymers was studied under dynamic thermal conditions and compared with that of block copolymers. The dependence of thermal characteristics or kinetic parameters on the content of ? OH groups of copolymers was established.     

Thermal stability of copolymers of vinyl acetate and methyl acrylate

The thermal degradation of a series of copolymers of vinyl acetate and methyl acrylate and the two homopolymers poly(vinyl acetate) and poly(methyl acrylate) obtained using Ce(IV) as initiator has been investigated using differential thermal analysis (DTA) and thermogravimetry (TGA) in dynamic nitrogen. The kinetic parameters E, n, and A have been obtained following several methods of thermogravimetric analyses. The stability increases as the methyl acrylate content in the copolymer composition increases. The incorporation of 5 mol % of vinyl acetate in the copolymer produces a marked decrease in stability compared to the homopolymer poly(methyl acrylate). There is evidence for an intramolecular lactonization process in vinyl acetate—methyl acrylate copolymers.     

Reactivity differences between isolated and vicinal vinyl acetate functions in high pressure ethylene/vinyl acetate copolymers

Three ethylene/vinyl acetate copolymers (3.5, 12.0 and 18.8 mol% VA; average melt index 8.5 g/10 min) were transformed into ethylene/vinyl alcohol copolymers and ethylene/vinyl alcohol/vinyl acetate terpolymers by homogeneous saponification. The reaction rate increased with mol% VA. This feature originated in the reactivity differences beteen vicinal and isolated VA functions. Simultaneous steric and polarity effects caused the reaction rate differences. ¹H-NMR, i.r., dielectric measurements and additional saponification reactions confirmed the difference of reactivity.     

Preparation of block copolymers from occluded vinyl acetate macroradicals

Stable vinyl acetate macroradicals were produced by polymerization in a nonviscous poor solvent, a viscous good solvent and a viscous poor solvent. These macroradicals were then allowed to react with a second vinyl monomer to produce block copolymers. The formation of block copolymers was monitored for rate and yield data. The block copolymers produced were poly(vinyl acetate-b-methyl methacrylate), poly(vinyl acetate-b-acrylic acid), poly(vinyl acetate-b-vinylpyrrolidone), poly(vinyl acetate-b-acrylonitrile), poly(vinyl acetate-b-styrene), and poly(vinyl acetate-b-methyl acrylate). The block copolymers were characterized by yield, precipitation in selected solvents, pyrolysis gas chromatography, and differential scanning calorimetry.     

The examination of some vinyl acetate/olefin copolymers by pyrolysis gas chromatography mass spectrometry.

A study of the thermal degradation of some vinyl acetate/olefin copolymers reveals that side chain scissions at the backbone and scissions within the side chains themselves yield fragments which are apparently characteristic of the parent olefin.     

Synthesis and properties of amphiphilic vinyl acetate triblock copolymers prepared by copper mediated living radical polymerisation

Polymerisation of vinyl acetate by conventional free radical polymerisation using a diazo initiator followed by copper mediated living radical polymerisation with a range of monomers was studied. This method led to the synthesis of triblock copolymers. We have thus successfully prepared several new ABA triblock copolymers where B is poly(vinyl acetate) and A is (dimethylamino)ethyl methacrylate (DMAEMA), (polyethylene glycol) methyl ether methacrylate (MeO(PEG)MA) or solketal methacrylate (SMA). The sequential conventional/living radical polymerisation approach provided an efficient route to synthesis of new block copolymers. The properties of these amphiphilic polymers have been subsequently investigated by ¹H NMR, fluorescence spectroscopy, tensiometry and dynamic light scattering to investigate their behaviour as potential surfactants.     

Factors influencing the aqueous solution behaviour of vinyl alcohol with vinyl acetate copolymers

Variations, as a function of temperature, are reported in the magnitude of values for the partial molal volume, partial molal expansibility, flowing volume and surface pressure for dilute solutions of a series of poly(vinyl alcohol-co-vinyl acetate) copolymers of various vinyl acetate contents and acetate sequence length. The temperature range investigated, from 5° to 30°, showed that, for all the examples examined, a general behaviour pattern was observed, indicating the predominance of hydrophilic interactions at temperatures below approximately 10°, with hydrophobic interactions predominating between 10° and 20°. The variations can be related to the detailed microstructure of the polymer backbone.     

Solution properties of ethylene-vinyl acetate copolymers

High-pressure ethylene–vinyl acetate copolymers of four different chemical compositions(9%, 15%, 45%, and 70% VA) were characterized to determine molecular weight and distribution. The four samples were fractionated by solvent–nonsolvent precipitation methods. Light-scattering, osmometry, and viscosity measurements were made on these fractionated copolymers to determine weight-average molecular weight \documentclass{article}\pagestyle{empty}\begin{document}$ \overline {M_w } $\end{document}, number-average molecular weight \documentclass{article}\pagestyle{empty}\begin{document}$ \overline {M_n } $\end{document}, molecular size in solution, and interaction constants. Dilute solution viscosity was measured on the fractions to determine intrinsic viscosity and Huggins' constant k′. Viscosity–molecular weight equations were established for the four copolymer compositions. The log intrinsic viscosity versus log molecular weight diagrams were analyzed and the average length of branches calculated. The composition of the polymer fractions, determined by C and H combustion analysis, was found not to vary significantly with molecular weight. The uniformly random character of the E/VA copolymers was thereby confirmed. The density of the fractions was determined by density-gradient column method. Chain sequence distribution of monomer units for the four copolymers was calculated by using IBM 704 computations involving the actual monomer reactivity ratios. Long sequences of either ethylene or vinyl acetate are improbable, except at the extremes of copolymer composition.     

Thermal degradation of vinyl alcohol/vinyl acetate copolymers V. Study of the reaction products of statistical copolymers

By coupling the evolved gas detection method with various analysis methods, the thermal decomposition products of the statistical vinyl alcohol/vinyl acetate copolymers were analysed. The data are presented comparatively with those obtained for the corresponding block copolymers of the same composition. The differences in the nature and amounts of the reaction products are explained by the structural characteristics of the copolymers.     

Structure and property relationships in ethylene–vinyl acetate copolymers

The effects of vinyl acetate content on crystallinity of ethylene–vinyl acetate (E/VA) copolymers were investigated by x-ray diffraction and differential thermal analysis (DTA). The values of these parameters obtained from DTA were found to agree quantitatively with data calculated from x-ray, probability equations, and copolymer theory. The melting points of the crystalline copolymers, and the molar amounts of vinyl acetate to produce a completely amorphous rubber corresponds exactly to that predicted by the Flory theory. The random character expected in E/VA copolymers is thereby confirmed. The physical properties of E/VA copolymers of all ranges of compositions and crystallinity were determined. Depending directly upon vinyl acetate content, the copolymers changed progressively from highly crystalline polyethylene to semicrystalline polyethylene, a completely amorphous rubber, a soft plastic with a glass transition near room temperature. Properties which were correlated with copolymer composition include: crystallinity, melting point, density, modulus, tensile strength, glass transition, and solubility. Finally, the effect on crystallinity and physical properties of replacing the acetoxy group in E/VA with the smaller, highly polar hydroxyl group (ethylene—vinyl alcohol copolymer) was also investigated.     

Analytical characterization of some pyrazolones and their copolymers with some vinyl compounds

Some new pyrazolones have been synthesized and their copolymers with styrene, methylmethacrylate and methacrylic acid prepared. The pyrazolones and their styrene and methylmethacrylate copolymers are insoluble in water but form chelate complexes with some alkaline-earth and transition metal ions. The water-soluble methacrylic acid copolymers do not form complexes with these elements, however, probably because of hydrogen-bonding of the chelating groups to the methacrylic acid carboxyl groups. Special attention was paid to the complexation of Au(III), which was assumed to proceed mainly through the nitrogen atoms of the pyrazolone ring.     

Copolymerization and copolymers of brominated phenylmaleimides with some vinyl monomers

The kinetics of the free radical copolymerization in solution of N-(4-bromophenyl)maleimide (MBPMI), N-(2, 4-dibromophenyl)maleimide (DBPMI) and N-(2, 4, 6-tribromophenyl)maleimide (TBPMI) with styrene (St), methyl acrylate (MA), methyl methacrylate (MMA) and acrylonitrile (AN) at low and high conversions were described. Some characteristic properties of the copolymers obtained, particularly their thermal behaviour were also presented.     

The effect of residual acetate groups on the structure and properties of vinyl alcohol–ethylene copolymers

Vinyl alcohol–ethylene (VAE) copolymers, commercially manufactured by hydrolysis of the corresponding vinyl acetate–ethylene copolymers, can contain small amounts of unhydrolyzed vinyl acetate. This article shows the influence of these residual groups on the structure of the resulting copolymers, studied by nuclear magnetic resonance and wide‐angle X‐ray scattering. Thermal and mechanical properties of these materials were investigated by differential scanning calorimetry, thermogravimetry, drawing behavior, birefringence measurements, and dynamic mechanical analysis. The structure of the copolymers is considerably affected by the volume of the residual acetate groups, bigger than that of the hydroxyl ones, which hinders the crystallization process. In relation to the thermal and mechanical properties, the temperature and enthalpy of melting as well as the Young's modulus and yield stress, decrease as vinyl acetate molar fraction increases. Moreover, the α and β relaxations are shifted to lower temperatures as residual content in the copolymer is raised. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 573–583, 2000     

13C-NMR study of chlorinated ethylene–vinyl acetate copolymers

¹³C-NMR has been used to analyze the microstructures of a series of experimental chlorinated ethylene–vinyl acetate copolymers (15–56% CI). Previously established line assignments for EVA copolymers and substituent effect parameters for chlorine have enabled us to tentatively assign partial structures up to five carbon atoms in length. The ¹³C-NMR analyses of a commercial vinyl chloride–vinyl acetate copolymer, a commercial vinyl chloride–vinyl acetate–ethylene terpolymer, and a commercial chlorinated polyethylene support the structural assignments. Data obtained for the experimental resins indicate that the acetate groups influence the way in which chlorine is added to the polymer chain. furthermore, the data indicate the acetate groups undergo little, if any, chlorination.