Solution of two-dimensional boundary-value problems of the theory of thin composite shells

Discrete analogues of the boundary-value problems of a two-dimensional refined theory of anisotropic shells taking into account the transverse shear deformation are presented. The systems of resolving equations in the general form are obtained for arbitrary nonshallow shells of variable curvature whose coordinate lines of the reduction surface may not coincide with the lines of principal curvatures. The algebraic problems of determining the stress-strain state in shells made of composite materials with stress concentrators under various kinds of loads are obtained as particular cases of the schemes presented. The results of calculating the stress concentration near a nonsmall circular hole in a transversely isotropic nonshallow spherical shell under internal pressure are presented. The dependences of stress concentration factors on the hole dimension and on a change in the shear stiffness of the shells are studied. A comparison between the calculation results obtained within the framework of the theories of shallow and nonshallow shells is given.Presented at the 11th International Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000).Timoshenko Institute of Mechanics, Ukranian National Academy of Sciences, Kiev, Ukraine. Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 4, pp. 465–472, July–August, 2000.     

Modeling of transverse shears of piecewise homogeneous composite bars using an iterative process with account of tangential loads

A nonclassical model for the stress-strain state of a piecewise homogeneous composite bar is proposed. The model is based on an iterative process and takes into account the deplanation of cross sections of the bar caused by transverse shears. Based on the shear strains of some particular approximation, higher approximation models are constructed. The model accounts for both the normal and tangential loads.Presented at the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000).Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 4, pp. 487–500, July–August, 2000.     

Optimal material orientation of nonlinear orthotropic materials

The problems of optimal material orientation are studied in the case of orthotropic elastic materials. It is assumed that the stress-strain relation (material behavior) is nonlinear and can be described by a transcendental relation including a logarithmic function. The orientation of the material is established from the condition that the elastic energy density attains its maximal (or minimal) value.Tartu University, Estonia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 3, pp. 335–346, May–June, 1999.     

Normal Forms of Maps: Formal and Algebraic Aspects

We survey and discuss Poincaré–Dulac normal forms of maps near a fixed point. The presentation is accessible with no particular prerequisites. After some introductory material and general results (mostly known facts) we turn to further normalization in the simple resonance case and to formal and analytic infinitesimal symmetries.Mathematics Subject Classifications (2000) 37G05, 39A11.Todor Gramchev: The author is supported by a NATO grant PST.CLG.979347 and GNAMPA–INDAM, Italy.     

Methods of finite element analysis of arbitrary buckling forms of sandwich plates and shells

Two statements of the problem of arbitrary buckling forms (BFs) (including synphasic, antiphasic, mixed flexural, flexural-shear, and shear forms in the tangential directions) of general-form sandwich shells and two schemes of its solution by the FEM are given. The first of the schemes is based on the use of refined linear equations for determination of the precritical stress-strain state and linearized equations of neutral equilibrium with all parametric addends necessary to determine the critical loads and reveal the possible BFs. The second one uses the general geometrically nonlinear relations of elasticity theory for investigation of the whole deformation process up to buckling in terms of a modified incremental (stepwise) statement of the problem. Examples of solution of particular problems are given.Center for Study of Dynamics and Stability, Tupolev Kazan' State Technical University, Kazan', Tatarstan, Russia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 4, pp. 473–486, July–August, 2000.     

Three-dimensional model of the deformation of twisted multilayered rods of composite materials

Conclusion An analytical approach based on certain assumptions regarding the character of the kinematic relations and equilibrium conditions was developed to calculate the stress-strain state of naturally twisted rods of composite materials. A computer program for calculating the stress and strain parameters in each layer was also developed. The results of calculations performed in accordance with the linearized variant (Eq. (5)) of general relations (4) agree satisfactorily with experimental data within a broad range of acting longitudinal loads. The method that was developed has been widely used in the design and optimization of several types of structures.Translated from Mekhanika Kompozitnykh Materialov, No. 4, pp. 610–614, July–August, 1990.     

Stress state of a composite shell with a sizable opening

The stress-strain state of a nonshallow cylindrical shell of a composite material is investigated. The shell is weakened by a circular hole and loaded with internal pressure. For solving the problem, the variational-difference method is used. The calculations are carried out for an orthotropic shell with a sizable hole, with account of the reduced shear stiffness of the material.Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 1, pp. 49–56, January–February, 2005.     

Theory of the elastic stability of compressible and incompressible composite media

The present article considers general problems of the theory of the elastic stability of composite media in the presence of finite and small precritical deformations with an arbitrary elastic-potential form. Our investigation was conducted for homogeneous and piecewise-homogeneous anisotropic media. Numerical results were obtained for laminar media. We have elucidated the case in which there is internal loss of stability (in the material structure) for compressible materials with small deformations (plane problem) and for incompressible materials with highly elastic deformations (plane and three-dimensional problems) for the Treloar and Mooney potentials.Institute of Mechanics, Academy of Sciences of the Ukrainian SSR, Kiev. Translated from Mekhanika Polimerov, No. 2, pp. 267–275, March–April, 1972.     

Stress-strain state in anisotropic multilayer shells with zones of nonideal contact between layers

Conclusions The theorem formulated here corresponds to the most general variational principle in the theory of elasticity. The equations and conditions derived from it constitute a complete system of relations necessary for defining and solving the problems which involve determining the stress-strain state in anisotropic multilayer shell structures. Assuming that some of the relations (2.2)–(2.9) are satisfied a priori, one can formulate other partial variational principles (Lagrange's, Reissner's, et al.).The result obtained here can be utilized for a correct derivation of two-dimensional equations for anisotropic multilayer shells of discrete structure, also as the starting point for devising approximate methods of solution of problems which involve determining the state of stress and strain in anisotropic multilayer shells.Translated from Mekhanika Kompozitnykh Materialov, No. 5, pp. 832–836, September–October, 1981.     

Asymptotic modeling of thin asymmetric laminates. Boundary-value problems and solution methods

We have investigated the internal dynamic stress-strain state of elastic laminates with perfectly joined anisotropic layers in the long-wave approximation. In contrast to familiar cases, in this treatment we allow an asymmetric arrangement of plies across the thickness and the most general anisotropy. We derive the generalized governing equations for plates by an asymptotic method based on three-dimensional dynamic elasticity. We discuss the similarities and differences between the derived two-dimensional theory and earlier models of S. A. Ambarisumyan and R. M. Christensen. We show that the asymptotic accuracy of the equations depends on the type of anisotropy: (i) general anisotropy; (ii) monodinic anisotropy or orthotropy of the layers.Report presented at the Ninth International Conference on the Mechanics of Composite Materials (Riga, October 1995).Translated from Mekhanika Kompositnykh Materialov, Vol. 31, No. 3, pp. 319–325, May–June, 1995.     

Basic equations of the theory of reinforced media

The author derives the basic equations of the theory of composite elastic media obtained by reinforcing some elastic medium with a large number of linear or planar elastic elements with high strength and deformation resistance. The argument is based on macrostructural considerations. The stress-strain state of each of the reinforcing elements is considered with allowance for interaction with the matrix material. In addition, the "smoothing" principle introduced in [1–3] is applied. This corresponds to approximating the reinforced medium with some equivalent quasi-homogeneous anisotropic medium.The case of a fibrous medium in which the reinforcing elements are rods or filaments [4] is discussed in detail. Allowance for moment effects leads to equations analogous to the equations of the Voight-Cosserat moment theory and its later generalizations. Similar equations are obtained for the case of laminated media, where the reinforcing elements are membranes or plates. On the basis of the viscoelastic analogy [7], the equations of the theory of reinforced media are extended to include the case in which the matrix and/or reinforcing materials are linear viscoelastic.Mekhanika Polimerov, Vol 1, No. 2, pp. 27–37, 1965     

Effect of temperature and moisture on the creep of polymeric materials 1. One-dimensional extension under stationary temperature-moisture conditions

Creep tests have been carried out on PN-3 polyester resin for one-dimensional tension in the linear region of the stress-strain relation at various fixed values of the temperature and moisture content of the material. The temperature and moisture dependence of the instantaneous elasticity and creep characteristics of the material have been determined. It is shown that time-temperature-moisture superposition can apply in creep under various fixed temperature-moisture conditions.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 3, pp. 393–399, May–June, 1975.     

Calculation of the rupture life of mechanical rubber goods

The stress-strain relation for an aging material is obtained from an analysis of a four-element model of a viscoelastic body with variable coefficients. In this formulation the problem of calculating the rupture life is divided into four steps: a) solution of the boundary-value problem of the theory of elasticity of an incompressible material; b) calculation of the stationary thermal field; c) solution of the rheological equation at the danger point; d) solution of the criterial equation for the local fracture time. An example of the calculation of the high-temperature rupture life of a rubber cord under constant load is given. The agreement with experiment is satisfactory.Riga Polytechnic Institute. Translated from Mekhanika Polimerov, No. 1, pp. 91–95, January–February, 1976.     

Transverse compression of PPTA fibers

Results of single transverse compression testing of PPTA and PIPD fibers, using a novel test device, are presented and discussed. In the tests, short lengths of single fibers are compressed between two parallel, stiff platens. The fiber elastic deformation is analyzed as a Hertzian contact problem. The inelastic deformation is analyzed by elastic-plastic FE simulation and by laser-scanning confocal microscopy of the compressed fibers ex post facto. The results obtained are compared to those in the literature and to the theoretical predictions of PPTA fiber transverse elasticity based on PPTA crystal elasticity.Presented at the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000).3TEX, Inc. 109, MacKenan Drive, Cary, North Carolina 27511, USA. Published in Mekhanika Kompozitnykh Materialov, Vol. 36, No. 4, pp. 533–544, March–April, 2000.     

Estimation of the error of approximation of the analytic solution of problems for nonlinear viscoelastic materials

Estimates are given for the error of approximation of the solution of problems of nonlinear viscoelastic media, for which the nonlinear elastic solution depends analytically on the material characteristics, the body and surface forces, and on the boundary displacements. From the integral estimates particular estimates are derived for viscoelastic materials in cases when the nonlinear elastic solution is majorized by a geometric progression or the sum of products of geometric progressions.Moscow Institute of Electronic Engineering. Translated from Mekhanika Polimerov, No. 5, pp. 827–834, September–October, 1971.     

Use of plastics in photoelastic stress determination

The use of plastics in photoelastic analysis is described; some special and general requirements relating to plastics used as optically sensitive materials for model-making are formulated. The theoretical premises for obtaining large blocks of epoxy-based optically sensitive material with given opticomechanical properties are developed.Mekhanika Polimerov, Vol. 3, No. 2, pp. 348–356, 1967Paper read at a seminar on polymer mechanics at the Institute of Mechanics, Moscow State University.     

Fundamentals of the theory of non-fabric glass-reinforced plastics

Starting from the known mechanical properties of the components (glass reinforcement and resin) the stress-strain relations for an anisotropic viscoelastic material (glass-reinforced plastic) are determined. Using Volterra's principle [2] of replacing the elastic constants in the solution of the problem of the theory of elasticity [5] by integral operators, relations for the given material are obtained and found to be in fairly good agreement with the experimental data. In a separate study the high-temperature behavior of GRP is investigated by calculating the integral operators, which are functions of the viscous properties of the resin and the temperature.Mekhanika polimerov, Vol. 1, No. 1, pp. 151–158, 1965     

Comparative micromechanical analysis of nonelastic behavior of unidirectional plastics with tetragonal and hexagonal structures

A mathematical model for determining the effective elastic properties and describing the processes of inelastic deformation and damage accumulation of unidirectional fiber-reinforced composites with tetragonal and hexagonal structures is developed. A comparative analysis of the effective elastic moduli of glass, boron, organic, and carbon unidirectional plastics shows that, if the fiber volume fraction does not exceed 0.5, the effective elastic properties calculated by the models presented give closely related results. The calculation results for nonlinear fields of deformation and failure are presented and the limiting strength surfaces of fibrous glass plastics with hexagonal and tetragonal structures are obtained for different transverse loading paths. It is found that the structure of a composite affects significantly its strength properties.Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000).Perm' State Technical University, Perm', Russia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 4, pp. 455–464, July–August, 2000.     

Quantum -modules and generalized mirror transformations

In the previous paper [Hiroshi Iritani, Quantum D-modules and equivariant Floer theory for free loop spaces, Math. Z. 252 (3) (2006) 577–622], the author defined equivariant Floer cohomology for a complete intersection in a toric variety and showed that it is isomorphic to the small quantum D-module after a mirror transformation when the first Chern class c₁(M) of the tangent bundle is nef. In this paper, even when c₁(M) is not nef, we show that the equivariant Floer cohomology reconstructs the big quantum D-module under certain conditions on the ambient toric variety. The proof is based on a mirror theorem of Coates and Givental [T. Coates, A.B. Givental, Quantum Riemann — Roch, Lefschetz and Serre, Ann. of Math. (2) 165 (1) (2007) 15–53]. The reconstruction procedure here gives a generalized mirror transformation first observed by Jinzenji in low degrees [Masao Jinzenji, On the quantum cohomology rings of general type projective hypersurfaces and generalized mirror transformation, Internat. J. Modern Phys. A 15 (11) (2000) 1557–1595; Masao Jinzenji, Co-ordinate change of Gauss–Manin system and generalized mirror transformation, Internat. J. Modern Phys. A 20 (10) (2005) 2131–2156].     

Effect of random irregularities of the creep of reinforced layered plastics

The authors investigate the creep of inhomogeneous materials consisting of a large number of stiff orthotropic elastic layers alternating with layers of linear isotropic viscoelastic material. The elastic layers are assumed to be almost plane; the functions describing the irregularities (curvature) form a random field. The averaged characteristics of the medium are found together with the variation of the averaged displacements and strains in time. An analogous problem was previously considered in [1, 6] on the assumption that the binder layers are elastic. The present paper is based on the equations of [1] and the elastic-viscoelastic correspondence principle [4]. When the correlation scales of the irregularities are small as compared with the dimensions of the body and the characteristic distances over which the averaged parameters of the stress-strain state vary appreciably is considered in detail. A relation is established between the creep functions for simple cases of the state of stress and the parameters characterizing the properties of the components, the properties of the random field of initial irregularities, etc. The development of perturbations with different wave numbers is investigated. The theory is used to describe the creep of reinforced layered plastics.Mekhanika Polimerov, Vol. 2, No. 5, pp. 755–762, 1966