The α-β inversion in submilligram particles of natural quartz

The bacground to the supposed development of the ‘Beilby layer’ on fine-grinding quartz is briefly reviewed. It is shown, using single crucible thermal analysis and sub-milligram DTA, that grinding quartz can cause a dispersion of the α-β inversion over a temperature range of several degrees; this is a crystallographic effect rather than an impurity effect. The sub-milligram DTA apparatus used is described and some thermal effects, such as impurity zoning, are illustrated.     

The determination of authigenic quartz in porous sedimentary rocks by means of differential scanning calorimetry

The DSC method is used to characterize diagenetic transformations of porous sedimentary rocks by measuring the reversible high-low inversion of quartz crystals. For this, ten specimens of authigenic quartz from cavities in sand-and limestones have been studied, avoiding any influence of mechanical treatment on the inversion behaviour. The method shows to be very sensitive in determining disordered parts of quartz crystals, using the interrelationship between the degree of structural disorder and the decrease of the inversion temperature. The application of the method for the purpose of prospection for hydrocarbons, sulfides or phosphates is shortly discussed. Dedicated to Professor Lisa Heller-Kallai on the occasion of her 65^th birthday     

热分析技术在药物研究中的应用

本文简要介绍了热分析技术在药学领域中的重要性及其应用。由于热分析技术具有试样微量化、快速简便、不用分离试样、不用溶剂、适用范围广、曲线易于解析等优点,在药学研究和药品质量检验等方面,热分析技术将发挥更重要的作用。     

The adsorption of alkylpyridinium chlorides and their effect on the interfacial behavior of quartz

This research was directed at understanding cationic surfactant adsorption phenomena on wet-ground natural quartz, mainly with dodecylpyridinium chloride as the model surfactant. How these surfactant ions adsorb at the interface was delineated through measurements of adsorption isotherms, zeta potentials, suspension stability, contact angles, induction times, and flotation response. Hydrocarbon chain association of adsorbed surfactant ions (or self-association) leads to four distinct adsorption regions as the concentration of surfactant is increased in solution. The same four regions manifest themselves in the behavior of all of the interfacial processes studied. At low concentrations, adsorption is controlled primarily by electrostatic interactions, but when the adsorbed surfactant ions begin to associate into hemimicelles at the surface, hydrophobic chain interactions control the adsorption process. The results of experiments with alkylpyridinium chlorides of 12, 14 and 16 carbon atoms can be normalized in terms of their CMCs, which clearly show that surface aggregation phenomena are driven by the same hydrophobic interactions that lead to micelle formation in bulk solution.     

New reference materials for the calibration (temperature and energy) of differential thermal analysers and scanning calorimeters

Several organic compounds like phenanthrene, benzanilide, anisic acid, triphenylene, 2-chloroanthraquinone, hexachlorobenzene, carbazole, 4-iodobenzoic acid, perylene, anthraquinone, as new reference materials for temperature and energy calibration of DTA and DSC apparatuses were studied in the range 300—600 K.

---

Zusammenfassung Als neue Referenzsubstanzen für Temperatur- und Energiekalibrierung von DTA- und DSC-Geräten wurden im Temperaturbereich 300–600 K einige organische Verbindungen, wie z.B. Phenanthren, Benzanilid, Anissäure, Triphenylen, 2-Chloranthrachinon, Hexachlorbenzol, Karbazol, 4-Jodbenzoesäure, Perylen und Anthrachinon untersucht.

     

石英晶体微天平的新进展

石英晶体微天平（quartz crystal microbalance,QCM）是一种对界面变化敏感的仪器,它已经在物理、化学、生物学、药物学、临床医学、环境科学等学科的界面问题研究中得到了一定的应用.然而,QCM在液相下的应用和推广一直受限于QCM数据定量解释的困难.为此,科研工作者发展了多种高级的QCM,比如带阻抗分析功能的QCM（impedance QCM,i-QCM）或带能量耗散监测功能的QCM（QCM with dissipation,QCM-D）,同时还发展了许多相应的理论模型.但是,对于多数生物、化学工作者来说,这些理论过于复杂.这极大地限制了QCM的推广和潜力发挥.本文以我们小组在QCM方面的研究工作为线索,对已报道的分析方法、模型和方程按5类应用条件进行了整理,给出了明确的界定标准：它们是：1,固-气界面;2,牛顿流体;3,固-液界面的薄膜;4,固-液界面厚膜;5,固-液界面超厚膜.对于每一类情况,我们将用通俗易懂的语言描述如何对QCM数据进行简化却又保证研究精度需要的定量分析.对于液态环境下的QCM数据的分析,我们着重介绍了＂固化水层＂模型,该模型允许QCM在一定的条件下成为一把＂分子尺＂,工作范围从几个纳米到数百纳米.该分子尺在多个创新界面问题研究中得到很好的应用.最后,我们从理论上分析了QCM作为生物传感器的先天缺陷--因基于面均质量检测的原理,QCM技术对溶液中蛋白的检测下限仅在1μg mL-1数量级.进一步,我们探索了QCM的发展方向和潜在应用领域,希望籍此能进一步推广QCM在各个学科界面问题中的研究应用.     

ZnAc2·2H2O在空气中的热分解动力学研究

用TG/DTA,DSC和XRD技术研究了固态物质ZnAc2.2H2O在空气中的热分解过程.结果表明,ZnAc2.2H2O在空气中发生两步分解,其失重率与理论计算失重率相符.XRD结果表明,ZnAc2.2H2O分解的最终产物为ZnO.用Friedman法和Flynn-Wall-Ozawa(FWO)法求得分解过程的活化能E,并通过多元线性回归方法给出了可能的机理函数.ZnAc2.2H2O在空气中两步分解的活化能分别为119.82和66.82kJ/mol.     

Calorimetric study of blends of poly(butylene terephthalate) and liquid crystalline copolyester

A calorimetric study of blends of poly(ethylene terephthalate-co-p-oxybenzoate), PET/PHB, with poly(butylene terephthalate), PBT has been carried out in the form of as-spun and drawn fibres. DSC melting and crystallization results show that PBT is compatible with LCP and the crystallization of PBT decreases by the addition of LCP in the matrix. The crystallization behaviour of blend fibres is investigated as a function of temperature of crystallization. A detailed analysis of the crystallization course has been made utilizing the Avrami expression. The isothermal calorimetric measurements provide evidence of decrease of rate of crystallization of PBT on addition of the liquid crystalline component up to about 50% by weight. The values of the Avrami exponents change in the temperature range from 200° to 215°C. Dimensionality changes in crystallization could be due to LCP mesophase-transition.     

Transformation-Governed Heating Techniques in Thermal Analysis II.

The described instrumental method makes it possible that the quasi-static heating technique, well applicable to thermogravimetric measurements, (see Part I of this paper) can be used in the case of DTA and DSC examinations, too. Based on the new type of curves the characteristic transformation temperatures, the whole course of the transformation in dependence of sample temperature, the extent of the enthalpy change caused by the transformation or by its partial processes can accurately be determined. The essentially greater accuracy of the measurements — in comparison to the conventional ones — is due to the quasi-static heating technique which ensures that the transformations should take place under quasi-equilibrium conditions.This revised version was published online in November 2005 with corrections to the Cover Date.     

Reference materials for energy and temperature calibrations of DTA and DSC instrumentation in the range 100–300 K

Fourteen organic compounds, 1-pentene, 2-methylbutane, 2-methyl-1,3-butadiene (isoprene),n-pentane, 2-chloropropane, ethyl alcohol, 2,2,4-trimethylpentane,n-hexane,n-hepatane, 1,3-difluorobenzene, 1,2-dichloroethane, hexafluorobenzene, cyclohexane and diphenyl ether, as new reference materials for energy and temperature calibrations of differential thermal analysers (DTA) and differential scanning calorimeters (DSC) in the temperature range 100–300 K, were investigated. The purities, triple point and transition temperatures, fusion and transition enthalpies of these compounds were measured using a low-temperature DTA apparatus developed by the CTM of the CNRS in Marseille. The results obtained were compared with those produced by adiabatic precision calorimetry. Our data are in good agreement with literature values. Enthalpies of fusion and transition, triple point and transition temperatures are reproduced within ±1% and ±0.1K, respectively. during the period 1991–2.     

Electrodeless piezoelectric quartz crystal and its behaviour in solutions

An electrodeless piezoelectric quartz crystal system was constructed with a quartz crystal plate, electrolyte solutions and platinum plates or rods immersed in the solutions for connecting to an oscillator, instead of the electrodes. The crystal without electrodes oscillates in the solutions. The frequency varies with temperature, specific conductance of the solutions and the mass change of the plate caused by the adsorption of material from the solution in, the same way as a normal piezoelectric quartz crystal with electrodes.     

电化学石英晶体微天平的近期应用进展

本文对近几年来电化学石英晶体微天平（EQCM）在吸附，膜的形成，腐蚀和电沉积等方面的应用进行了概述，并对其应用现状和前景进行了分析。     

The study of electrochemical palladium behavior using the quartz crystal microbalance

The electrochemical quartz crystal microbalance (EQCMB) method has been used to evaluate the processes which occur in/on the palladium electrode in basic solutions. Hydrogen electrosorption in palladium is accompanied by an additional frequency shift that can be attributed to the stresses generated inside the Pd metal. A non-linear dependence between the mass change and the charge consumed during hydrogen oxidation in the Pd electrode has been found for hydrogen absorbed in the α- and β-phases. This effect precludes the objective estimation of the amount of hydrogen absorbed inside the Pd electrode. The EQCMB method has been used, however, for studying the surface electrode processes on the Pd electrode, i.e. specific anion adsorption, surface oxidation and dissolution. Also, the structure of the palladium oxide formed on the Pd surface during electrochemical oxidation is discussed in this paper and the effect of the anodic limiting potential on the oxide structure is reported. Received: 10 August 1999 / Accepted: 24 September 1999     

Fusion temperatures and enthalpies of high-temperature materials determined by differential thermal methods

The temperature and enthalpy of fusion of silver were measured in a differential thermal analyzer with gold and aluminum as reference materials. The measurement procedures and the data calibration (or correction) procedures used successfully in our laboratory for differential scanning calorimetry were applied. The experimental fusion temperature, (1233.9±1.0)K, and enthalpy, (108.4±3.3) J·g⁻¹, are compared with the assigned value of temperature for the IPTS-68 scale, 1235.08 K, and with a value for enthalpy, 110.75 J·g⁻¹. Work done at the National Institute of Standards and Technology. Not subject to copyright.     

Thermal,XRD and spectrophotometric study on artificially degraded woods

Thermogravimetry, differential thermal analysis, differential scanning calorimetry in oxygen flux were used to characterize two wood types: fir and chestnut woods. They were characterized by the peak temperatures of DTA, DTG and DSC curves and by the different mass losses evaluated on the basis of the measured thermal data. The samples were woods in powder obtained during sawing. Complementary characterization of the woods was performed by estimating the crystallinity of cellulose by means of X-ray powder diffraction. In order to simulate the degradation of wet woods, fir and chestnut woods were put into deionised water and into artificial sea water for several weeks; some samples of woods contained Cu and Fe nails to ascertain the effect of these metals on the degradation process. The thermal and X-ray diffraction measurements were then performed on the wet woods, following the same previous procedure. X-ray fluorescence was used to investigate the penetration of metals into wood samples.     

Thermal study of the influence of chemical bond ionicity on the glass transformation in (Na2O, CaO, MgO)-Al2O3-SiO2 glasses

The relation between change of the specific heat (ΔC _p) accompanying the glass transformation and the chemical composition of glasses (Na₂O, CaO, MgO)-Al₂O₃-SiO₂ system has been studied. The exchange of modifiers in the glass structure causes the ΔC _p increase in the sequence Na>Ca>Mg. Change the glass network composition by introducing Al into it makes smaller increase of the ΔC _p values. It has been shown that degree of ΔC _p value changes is dependent on the iconicity/covalence of chemical bonds of cations with oxygen of glass structure network. This revised version was published online in July 2006 with corrections to the Cover Date.     

Adsorption of metal ions from solution onto a piezoelectric quartz crystal

Many metal ions are spontaneously adsorbed onto a piezoelectric quartz crystal and change the oscillation frequency. The pH ranges in which the metal ions adsorbed were just below that of precipitate formation as the ‘hydroxides’; frequency changes caused by adsorption were not observed in these pH ranges where the ‘hydroxides’ formed. Cationic organic reagents, such as crystal violet and methylene blue, were also adsorbed on the piezoelectric quartz crystal but non-ionic and anionic organic compounds were not. These results showed that the crystal was negatively charged on the surface.     

Thermodynamic transition properties of highly ordered smectic phases

A series of polyethers have been synthesized from 1-(4-hydroxy-4-biphenyl)-2-(4-hydroxyphenyl)propane and , -dibromoalkanes having different numbers of methylene units [TPPs]. Both odd- and even-numbered TPPs [TPP(n=odd)s and TPP(n=even)s) exhibit multiple transitions during cooling and heating and they show little supercooling dependence, indicating close-to-equilibrium nature of these transitions. Combining the structural characterization obtainedvia wide angle X-ray diffraction powder and fiber patterns at different temperatures and the morphological observations from microscopy techniques, not only the nematic liquid crystalline phase but also highly ordered smecticF, smectic crystalG andH phases have been identified. The phase diagrams for both TPP(n=odd)s and TPP(n=even)s have been constructed [1–3]. Thermodynamic properties (enthalpy and entropy changes) during these transitions are studied based on differential scanning calorimetry experiments. The contributions of the mesogenic groups and methylene units to each ordering process can be separated and they indicate the characteristics of these processes thereby providing estimations of the transition types.This work was supported by the SZDC's Presidential Young Investigator Award from the National Science Foundation (DMR-9175538). The generous donation of a DSC-7 from Perkin Elmer Inc. is also greatly appreciated.     

Thermal decomposition of silver cyano complex and characterization its decomposition products by ETA,DSC, DTA and TG

It was found by DTA and TG that [Phenyl₂I][Ag(CN)₂] in the solid state is chemically stable on heating in argon up to 160°C. During heating to higher temperatures it decomposes, forming volatile products such as [Phenyl]I, [Phenyl]NC and (CN)₂ [1]. After heating the sample to 500°C metallic silver resulted. The volatile and intermediate solid products were analysed by IR-spectroscopy.It was found by means of DTA and ETA that an isophase reversible transition takes place when the sample is heated and cooled, not higher than 100°C. At heating higher than 100°C the sample melts (melting pointT _m=135°C). The enthalpy melting was determined by means of DSC (H=–28 kJ·mol^–1).By means of ETA the disorder degree of the final decomposition product was estimated. The value of the activation energy of radon diffusion in the temperature range 720°–500°C equals 32.6 kJ·mol^–1.Dedicated to Prof. I. N. Bekman Moscow State University at the occasion of his 50th birthday     

High sensitive piezoelectric quartz crystal liquid density sensor

<正>We report for the first time a cleavage phenomenon in the resonant peak of a piezoelectric quartz crystal(PQC) in liquid phase.In the presence of a strong longitudinal wave effect,an additional resonant peak appears in the conductance-frequency curve.With gradually increasing liquid density,the additional peak moves from low to high frequency region then disappears.The frequency of the additional resonant peak is sensitive to the change in liquid density.The frequency shift of the additional peak is linear with the liquid density in a given range.For a 5 MHz PQC with a reflection distance of 16 mm for longitudinal wave,the sensitivity to liquid density is 2.61×10~6 Hz g~(-1) cm~3.The overlap between the primary resonant peak and the additional resonant peak causes a decrease in the intensity of the former and an increase in the intensity of the latter.In a combined impedance analysis method,the changes in surface mass loading,density and viscosity of the liquid were monitored simultaneously by a PQC sensor.