利用强度调制消除零频的傅里叶变换轮廓测量

采用双色正弦条纹投影的傅里叶变换轮廓术中零频分量的扩展对有用基频分量有影响,为此提出一种新型的基于强度调制的零频消除方法提高测量准确度和范围.通过采集一帧变形彩色条纹图并分离颜色通道获得两幅相位差为π的条纹图,对变形条纹做强度调制校正,进而消除零频分量,实现高度解析.理论模拟和实验测试均验证了此方法的有效性.相比传统的...     

傅里叶变换轮廓术中基于经验模态分解抑制零频的方法

为了消除傅里叶变换轮廓术中零频成分的扩展对测量范围和精度的影响,将经验模态分解方法引入到傅里叶变换轮廓术中,对变形条纹图进行经验模态分解,将条纹图分解为一系列的从高频到低频排列的固有模态函数,达到将高频成分和低频成分相分离的目的,用以消除零频成分,提高测量范围.同采用相移消除零频成分的技术相比,此方法只需要一帧条纹图,测量装置简单、实时性强、计算速度快.文中给出了理论分析和实验验证.     

基于复合光栅投影的快速傅里叶变换轮廓术

在实际傅里叶变换轮廓术测量中,获取条纹图的零频分量对傅里叶变换轮廓术的测量精度和测量范围有很大影响,甚至妨碍三维面形的正确重建。π相移技术常被用来消除零频分量对傅里叶变换轮廓术测量的影响,但它需要采集两帧具有π相位差的条纹图。这影响了傅里叶变换轮廓术测量方法的实时性。提出采用复合光栅投影来实现从一帧条纹图中消除零频对傅里叶变换轮廓术测量的影响,该复合光栅是由两个不同频率的载频分别调制与其方向垂直的两帧具有π相位差的条纹并叠加形成的。实验表明,同传统的π相移方法相比,提出的新方法没有明显降低π相移傅里叶变换轮廓术的的测量精度,因此能真正实现实时高速测量。     

基于双色条纹投影的快速傅里叶变换轮廓术

在实际傅里叶变换轮廓术测量中，获取的条纹图扩展的零频分量对傅里叶变换轮廓术的测量精度和测量范围有很大影响，甚至妨碍正确三维面形的恢复。π相移技术常被用来消除零频分量对测量的影响，但需要在测量系统中安装精密相移装置，并需要采集两帧具有π相位差的条纹图。传统傅里叶变换轮廓术中，完成精密相移需要较长的时间，影响了傅里叶变换轮廓术测量方法的实时性。提出了采用双色正弦光栅投影来实现从一帧条纹图中消除零频对傅里叶变换轮廓术测量的影响。该方法同传统的π相移方法相比，不需要相移装置，测量系统简单，并且能真正实现高速测量。     

基于优化电子散斑光谱的三维物体测量研究

用激光光束直接照射到测试表面,再用CCD采其变形前后表面散斑颗粒干涉形成的条纹,条纹图解析为测量点的位移量和变形量,进而得到其离面位移,在优化算法的时候采用π位相技术获取另一个π相移的变形条纹图像,将面内位移与离面位移分离,为了消除零级分量,让投影光栅移动1/2个周期.通过Matlab和四步位相算法给出了三维空间模型,得出变形后物体的离面位移数据.实验仿真数据表明其能够稳定地测量物体变形场三维分量,误差较低.     

基于双色条纹投影的薄膜振动模式分析

结构光投影和条纹时间平均分析技术已被用于振动模式分析中,但由于投影单色正弦条纹时振动薄膜变形条纹傅里叶谱中零频涵盖范围较大,会限制滤波窗的选取范围,从而影响模式的最终重建结果。为提高振动模式重建的准确性,提出了一种利用π相移正弦条纹投影进行薄膜振动模式分析和振幅重建的方法,通过处理两个通道的条纹分量达到消除零频的目的。给出了该方法的理论分析,完成了相应的计算机模拟,分析了影响测量精度的因素。通过与投影单色正弦条纹的振动模式重建结果对比,表明该方法有较高的重建精度。不同激励频率下的实际薄膜振动实验结果也证明了该方法正确可行。     

基于条纹对比度和背景光校准的正交复合光三维测量方法

提出了一种对条纹对比度和背景光进行校准的正交复合光三维测量方法。从参考平面的复合光栅像中解调获得各帧相移正弦条纹,通过频域滤波的方法获取条纹的零频和基频分量,计算出各帧相移正弦条纹相对第一帧正弦条纹的对比度和背景光比例系数,并以此系数对实物测量时解调出来的各帧变形条纹对比度和背景光进行校准,建立了新的三维测量数学模型。实验证明该方法能降低传统正交复合光三维测量方法中的解相误差,提高系统的测量精度。     

基于彩色光栅投影的快速三维测量方法

 针对条纹投影术提取物体高度信息的问题,提出了一种新的基于彩色光栅投影的三维测量方法。对选取G分量为255,R,B分量各取0或255而组成的青、白、黄、绿四色遵循格雷码原理进行编码,然后将G分量作正弦调制形成投影光栅投向被测物体。提取采集到的光栅变形图中G分量,利用傅里叶变换方法得到其初始相位;同时对采集到图像中的R,B分量作阈值迭代分割而G分量自动赋值为255,综合三分量信息得到条纹颜色信息进而获取条纹的周期信息,从而展开相位。全过程仅需投影一幅彩色光栅图就能完成三维测量,实验结果表明该算法易于实现,在测量实时性和精确性上表现良好。     

基于结构光的光线追迹与波前重建方法

提出一种基于结构光条纹成像的光线追迹和波前重建方法.以结构光条纹相位为信息载体,采用相移技术精确地测量结构光条纹成像过程中相位的变化,实现高分辨的光线追迹,得到点列图.由于光线传播方向与波前垂直,凶此可以实现波前重建.将一个液晶显示器(LCD)置于点光源后,显示正弦灰度调制光栅图样以产生标准条纹光束.条纹光束通过被测光学元件后,发生变形.CCD记录下变形条纹图样,根据相移技术进行处理,计算后完成测量.由于调制光栅图样是由计算机产生的,所以光栅的周期和方向可以灵活设置,并可以实现精确的相移.实验验证了该方法的可行性.     

减模式下数字散斑干涉光强不均匀性对检测的影响和校正方法

在数字散斑干涉测量中,照明光的不均匀或被测试物反射光的不均匀,会导致条纹图像不均匀,严重时甚至会引起条纹的丢失.在分析剪切型散斑干涉原理的基础上,基于散斑相位差的主值在(-π,π]均匀分布的假设,提出了减模式下光强不均匀的校正方法,即通过构建一个新的强度分布函数,分区域消除背景光强,从而消去光强调制项,使干涉条纹图的显示强度变得均匀.将该方法应用于受到强烈冲撞的航空复合材料的剪切散板干涉测量中,将原来隐藏在光强较弱区域的条纹清晰地显示了出来.表明本文的方法能有效地降低光强不均匀性对散斑干涉条纹图的影响.     

Fourier transform profilometry based on composite structured light pattern

In Fourier transform profilometry (FTP), the zero frequency of the imaged patterns will influence the measurement range and precision. The π phase shifting technique is usually used to eliminate the zero order component, but this method requires the capture of two fringe patterns with a π phase difference between them, which will impede the real time application of the method. In this paper, a novel method is proposed, in which a composite structured light pattern is projected onto the object. The composite structured light pattern is formed by modulating two separate fringe patterns with a π phase difference along the orthogonal direction of the two distinct carrier frequencies. This method can eliminate the zero frequency by using only one fringe pattern. Experiments show that there is no decrease in the precision of this novel method compared with the traditional π phase shifting technique.     

Method for eliminating zero spectrum in Fourier transform profilometry

Windowed Fourier transform (FT) is introduced into Fourier transform profilometry (FTP) to extract zero component included in deformed fringe pattern without capturing two fringe patterns with π phase difference. First, we extract zero component of deformed fringe image using windowed FT and normalize it, then calculate the normalized Fourier spectra of deformed fringe image, finally subtract the zero component from Fourier spectra of deformed fringe image. We give the theoretical analysis of the proposed method. The experiment is carried out to demonstrate that the method can eliminate zero component and extend the measurable slope of height variation to nearly three times of the conventional FTP.     

A novel color fringe projection based Fourier transform 3D shape measurement method

A novel Fourier transform 3D shape measurement method based on color fringe projection is proposed in order to solve the spectrum overlapping and phase unwrapping problems existed in Fourier transform profilometry (FTP). The R and G components of the color fringe are set to two sinusoidal patterns with different frequencies and the B component is set to the average value of R or G component. Then this pattern is projected to the object and the deformed fringe image is captured. Three gray patterns are separated from the color fringe, the background and high frequency noise can be eliminated using our method and the accurate unwrapped phase can be got. Only one shot color pattern is projected to get the 3D information of the object. Experiment results show that the 3D information of an object can be obtained rapidly and accurately.     

基于希尔伯特变换的干涉条纹相位解调新算法

提出了一种新的应用希尔伯特变换解调干涉条纹相位的算法,可以从单幅干涉条纹图中解调出全场相位分布.在实际应用中,常借助傅里叶变换实现希尔伯特变换算法,但是会忽略负频率成分,造成相位信息的丢失.对于相位分布非单调变化的干涉条纹,提出了一种判断函数,用来计算相位信息零频率点的分布.利用相位的零频率点分布构造了一个二元模板,使用该模板对本文提出的两次希尔伯特变换法产生的包裹相位图进行修正.对修正后的包裹相位图进行解包裹处理,可以得到连续的全场相位分布.对该方法用计算机模拟进行了验证.     

An improved stair phase encoding method for absolute phase retrieval

An improved phase unwrapping method is proposed to reduce the projection fringes in three-dimensional (3D) surface measurement. Color fringe patterns are generated by encoding with sinusoidal fringe and stair phase fringe patterns in red and blue channels. These color fringe patterns are projected onto the tested objects and then captured by a color CCD camera. The recorded fringe patterns are separated into their RGB components. Two groups of four-step phase-shifting fringe patterns are obtained. One group of the stripes are four sinusoidal patterns, which are used to determine the wrapped phase. The other group of stripes are four sinusoidal patterns with the codeword embedded into stair phase, whose stair changes are perfectly aligned with the 2π discontinuities of sinusoidal fringe phase, which are used to determine the fringe order for the phase unwrapping. The experimental results are analyzed and compared with those of the method in Zheng and Da (2012. Opt Express 20(22):24139–24150). The results show that the proposed method needs only four fringe patterns while having less error. It can effectively reduce the number of projection fringes and improve the measuring speed.     

Orthogonal projection technique for resolution enhancement of the Fourier transform fringe analysis method

The spatial resolution of the phase map in the Fourier transform fringe analysis method is determined by the size of the filter’s window in frequency domain. This article reports a straightforward technique to improve the method’s resolution by a factor of nearly two. The technique requires capturing a second image with a fringe pattern orthogonal to the first one, therefore using the information from both patterns to eliminate the central component in frequency space. The resulting spectrum supports double sized filter windows for removal of the carrier frequency without leaking into adjacent orders. The overall spatial resolution of the method is thus increased. In the following, the Fourier fringe analysis method is briefly reviewed, the new technique is described and analyzed and the experimental results are shown and discussed.     

用于三维测量的快速相位解包裹算法

减少条纹投影轮廓术的条纹图数量一直是本领域的研究热点。传统的时间相位解包裹算法,一般需要额外的条纹信息来确定条纹级次,导致条纹图数量过多。提出一种用于三维测量的快速相位解包裹算法,只需要N步标准相移正弦条纹图,就可以完成绝对相位的计算。首先,利用标准相移算法计算包裹相位和消除背景的掩膜;然后,直接利用包裹相位和掩膜,根据连通域标记算法计算条纹级次,进而求得绝对相位。该方法最少只需3幅条纹图,就可以完成三维测量,数据处理速度快。计算机仿真和实验结果验证了该方法的有效性和鲁棒性。     

一种针对彩色物体的光栅投影三维测量方法

针对传统彩色编码光栅三维轮廓术中光栅易受到物体表面彩色纹理的干扰,从而造成编码条纹颜色误判和相位误差增大这一问题,提出一种基于互补彩色光栅的三维测量方法,给出了理论分析、光栅设计原理、补偿算法与实验分析。对图像进行初步的解耦校正后,通过预先设计的光栅互补特性,依据彩色响应模型求取物体表面逐点的反射率,并对红绿蓝(RGB)三通道反射率的不平衡进行补偿,消除物体表面彩色纹理的干扰,改善光栅的正弦性。以补偿后的图像来指导彩色编码条纹的分割解码并用傅里叶变换法提取出包裹相位,依据解码结果指导相位展开,继而完成整个三维测量过程。实验证明该方法对彩色纹理的补偿准确有效,降低了彩色纹理对测量的影响。