The heat of dissolution of uranyl nitrate in aqueous nitrate solutions

Conclusions A model has been suggested to explain the observed relationship between the measured heats of dissolution of uranyl nitrate in aqueous nitrate solutions and the concentration of the salting-out agent. The model describes the change in the structure of water in the solution with change in its concentration. On the one hand, a destruction of the water structure by ions occurs, which is weakened with increase in the distance from the ion, and leads to such irregularity in the distribution of water molecules in the solution that the mean number of molecules of water in unit volume is increased with increase in the distance from the ions. In experiments on the heat of dissolution this increase leads to increased hydration of the uranyl cation and reduction in the endothermicity of the dissolution with increase in the concentration of the solution. On the other hand, an interaction occurs between the ions of the salting-out agent and the water molecules in the solution, leading to the opposite result: There is an increase in the mean number of water molecules of the solution in unit volume in the direction of these ions. In experiments on the heat of dissolution this is revealed in the dehydration of the uranyl cation, and correspondingly in an increase in the endothermicity of the dissolution with increase in the concentration of the solution. The proposed model is in harmony with data on vapor pressure above the solutions (the relationship between the activity coefficient of the water and the concentration of the solution).Translated from Zhurnal Strukturnoi Khimii. Vol. 3, No. 2, pp. 143–150, March–April. 1962     

Grand canonical ensemble molecular dynamics simulation of water solubility in polyamide-6,6

Grand canonical ensemble molecular dynamics simulation is employed to calculate the solubility of water in polyamide-6,6. It is shown that performing two separate simulations, one in the polymeric phase and one in the gaseous phase, is sufficient to find the phase coexistence point. In this method, the chemical potential of water in the polymer phase is expanded as a first-order Taylor series in terms of pressure. Knowing the chemical potential of water in the polymer phase in terms of pressure, another simulation for water in the gaseous phase, in the grand canonical ensemble, is done in which the target chemical potential is set in terms of pressure in the gas phase. The phase coexistence point can easily be calculated from the results of these two independent simulations. Our calculated sorption isotherms and solubility coefficients of water in polyamide-6,6, over a wide range of temperatures and pressures, agree with experimental data.     

Analytical strategies to determine antibiotic residues in fish

The accelerated growth of aquaculture has resulted in a series of harmful effects to human health. The widespread and unrestricted use of antibiotics in this industry, to prevent bacterial infections, leads to remaining amounts in the aquatic environment. This has resulted in the emergence of antibiotic-resistant bacteria in aquaculture environments, in the increase in antibiotic resistance in fish pathogens as well as in the transfer of these resistance determinants to human pathogens. Moreover, the use of large amounts of antibiotics may lead to the presence of residual antibiotics in fish tissue and fish products. Fluoroquinolones, tetracyclines, penicillins, sulphonamides and other antibiotics, exhibiting activity against both Gram-positive and Gram-negative bacteria, are widely used for the treatment and prevention of diseases in fish. An extended and comprehensive review on the recent analytical methodologies concerning antibiotic residues in fish reported in the literature is provided in the present article. Emphasis is given on sample preparation regarding isolation and purification, chromatographic conditions and method validation according to legislation. Results of published assays are comparatively presented and criticised.     

Polymerization of α-amino acid N-carboxy anhydride. IX. Copolymerization of α-amino acid N-carboxy anhydride in heterogeneous system

Copolymerization of NCA's was undertaken in a heterogeneous system in acetonitrile, which is not a solvent of the polypeptides. The reactivity ratio was calculated by using the Lewis-Mayo equation. Further, the conversion rate in the copolymerization and the configuration of the copolymer produced were compared with those of the copolymerization in the homogeneous system in nitrobenzene, in which the copolypeptides are swollen. The rate of copolymerization in acetonitrile was between the rates of polymerization of the individual monomers. It has been reported that the configuration of the copolymer obtained in dimethylformamide, in which the copolypeptides are swollen, is of the block type. On the other hand, many polypeptides obtained in acetonitrile, which is not a solvent of the copolypeptides, had a random configuration near to an alternating configuration.     

Interactions between carbonic anhydrase and its inhibitors revealed by gel electrophoresis and circular dichroism

Structural properties, and especially the differential stability, of complexes between carbonic anhydrase (CA) and three sulfonamide inhibitors, acetazolamide, dorzolamide and methazolamide, were investigated by spectroscopic and electrophoretic techniques. These included denaturant gradient gel electrophoresis either across a urea or a steady-state transverse sodium dodecyl sulfate (SDS) gradient. Acetazolamide, the smallest and most hydrophilic of the sulfonamides, forms the most stable complex in the presence of urea, whereas dorzolamide, with a bulky and hydrophobic structure, is most stable against the effects of SDS. At pH 7.4, complexes with dorzolamide show minimal changes in mobility across the SDS gradient, as if unaffected by the detergent, both in the presence and in the absence of excess ligand in the gel. When bound to both acetazolamide and methazolamide, on the other hand, CA displays an increase in mobility above 0.05% SDS, lower in the presence than in the absence of excess ligand. The finding of a distinct pattern for the unliganded enzyme, however, suggests the complexes can still retain the ligand, although binding of the surfactant changes their charge density. Under saturating conditions and in the presence of SDS, the surface charge of all complexes is much lower than for unliganded, denatured CA. Circular dichroism (CD) spectra clearly indicate that the increase in secondary structure and the decrease in tertiary structure brought about in CA by the presence of low concentrations of SDS are largely prevented by complexing with the inhibitors. These observations point out peculiar properties of each CA inhibitor, of potential value in the definition of their biological activities and also in the potential development of novel antagonist molecules.     

UNDERSTANDING THE HYDROPHOBIC EFFECT

The hydrophobic effect is the common expression for processes where nonpolar groups in molecules are spontaneously removed from water. Thermodynamic analysis of hydrocarbon solubility in water, micellization and adsorption of surfactants show that the hydrophobic effect can be understood in terms of two contributions. The first contribution is attributed to the structuring, or rearrangement, of water molecules in the vicinity of a hydrophobe. This contribution is favorable, and hence increases the solubility of hydrocarbons in water, increases the cmc, and decreases the adsorption of surfactants. The second contribution is attributed to the formation of a cavity in the water in order to accomodate the hydrophobe. This contribution dominates over the first one and is unfavorable, i.e. it decreases the solubility of hydrocarbons in water, decreases the cmc, and increases the adsorption of surfactants. Thus, the cause of the hydrophobic effect is to be found in the large energy required to form a cavity in the water. On the other hand the temperature dependence of the hydrophobic effect is entirely determined by the water structuring, or rearrangement, in the vicinity of a hydrophobe.     

Formation of benzenediols upon electron-beam distillation of lignin mixtures with alkanes

In the process of the electron-beam distillation of lignin, its conversion into benzenediols increases in the presence of alkanes in the irradiated sample. An increase in the yield of benzenediols is accompanied by a decrease in the fractions of guaiacol, creosol, ethylguaiacol, and vinylguaiacol in the tar distilled off. It has been noted that alkanes serve as an additional source of atomic hydrogen and alkyl radicals, which, in turn, play a key role in the formation of benzenediols. In the presence of alkanes in the irradiated sample, guaiacol can be the main precursor of catechols; the proportion of guaiacol in the tar is almost three times below that in the case of distillation of individual lignin. It has been hypothesized that the chain decomposition of lignin can occur with the participation of ?H and ?CH₃ radicals.     

基于MALDI质谱成像技术分析莲子中代谢物的组织分布

该文建立了一种可对莲子中多种代谢物进行高覆盖分析的基质辅助激光解吸附质谱成像(MALDI-MSI)方法,实现了莲子中生物碱类、黄酮类、氨基酸类、脂肪酸类、有机酸类、胆碱类、磷脂类等多种代谢物的组织原位可视化表征。结果表明,生物碱类代谢物主要分布在莲子胚芽中;黄酮类代谢物主要分布在莲子胚芽和种皮中;氨基酸类代谢物在莲子子叶中的含量显著高于莲子胚中;脂肪酸类代谢物在莲子不同组织中的分布差异很小;胆碱类代谢物在莲子胚芽和莲子子叶底部的含量更高,甘油磷酸胆碱在莲子子叶顶部的含量更高;有机酸类代谢物以及绝大多数磷脂类化合物在莲子子叶中的含量高于莲子胚。该研究为评价莲子药物质量、探究莲子中化合物的时-空代谢网络提供了新的技术支持。     

Membrane lipids are both the substrates and a mechanistically responsive environment of TMEM16 scramblase proteins

Recent discoveries about functional mechanisms of proteins in the TMEM16 family of phospholipid scramblases have illuminated the dual role of the membrane as both the substrate and a mechanistically responsive environment in the wide range of physiological processes and genetic disorders in which they are implicated. This is highlighted in the review of recent findings from our collaborative investigations of molecular mechanisms of TMEM16 scramblases that emerged from iterative functional, structural, and computational experimentation. In the context of this review, we present new MD simulations and trajectory analyses motivated by the fact that new structural information about the TMEM16 scramblases is emerging from cryo-EM determinations in lipid nanodiscs. Because the functional environment of these proteins in in vivo and in in vitro is closer to flat membranes, we studied comparatively the responses of the membrane to the TMEM16 proteins in flat membranes and nanodiscs. We find that bilayer shapes in the nanodiscs are very different from those observed in the flat membrane systems, but the function-related slanting of the membrane observed at the nhTMEM16 boundary with the protein is similar in the nanodiscs and in the flat bilayers. This changes, however, in the bilayer composed of longer-tail lipids, which is thicker near the phospholipid translocation pathway, which may reflect an enhanced tendency of the long tails to penetrate the pathway and create, as shown previously, a nonconductive environment. These findings support the correspondence between the mechanistic involvement of the lipid environment in the flat membranes, and the nanodiscs. © 2019 Wiley Periodicals, Inc.     

Electrophoretic mobility does not always reflect the charge on an oil droplet

Electrophoresis is widely used to determine the electrostatic potential of colloidal particles. Oil droplets in pure water show negative or positive electrophoretic mobilities depending on the pH. This is commonly attributed to the adsorption of hydroxyl or hydronium ions, resulting in a negative or positive surface charge, respectively. This explanation, however, is not in agreement with the difference in isoelectric point and point of zero charge observed in experiment. Here we present molecular dynamics simulations of oil droplets in water in the presence of an external electric field but in the absence of any ions. The simulations reproduce the negative sign and the order of magnitude of the oil droplet mobilities at the point of zero charge in experiment. The electrostatic potential in the oil with respect to the water phase, induced by anisotropic dipole orientation in the interface, is positive. Our results suggest that electrophoretic mobility does not always reflect the net charge or electrostatic potential of a suspended liquid droplet and, thus, the interpretation of electrophoresis in terms of purely continuum effects may need to be reevaluated.     

Mössbauer Investigation of Characteristic Distribution of Iron Oxides in Sediments from the Antarctica

Sediments from the Admiralty Bay, King George Island, Antarctica, were investigated by ⁵⁷Fe Mössbauer spectroscopy, X-ray diffractometry, and radiometry. Quartz, feldspar, chlorite, calcite, dolomite, mica, kaolinite, hematite and magnetite were identified as constituent minerals in the sediment samples. The phase composition and the iron distribution among the crystallographic sites of iron-bearing minerals (silicates, magnetite and hematite) of samples from different location have been derived from the complex Mössbauer spectra. At different locations sediments had significant characteristic differences in the mineral composition, in the iron distribution among the crystallographic site of silicates, and in the specific radioactivity of Cs radionuclides. These results indicate differences in the rock formation and alteration by the sediments in this maritime part of Antarctica. There is a much higher amount of iron oxides in the sediments from south part of the geological fault across the Admiralty Bay than in the north part. This can be associated with much more alteration in the rocks in the south part compared to the northern one. This finding can contribute to the question of the history of the formation and alteration of volcanic rocks in the border of Antarctica.     

External electric field effects on absorption, fluorescence, and phosphorescence spectra of diphenylpolyynes in a polymer film

External electric field effects on absorption, fluorescence, and phosphorescence spectra of a series of unsubstituted diphenylpolyynes have been examined in a PMMA film. The analysis of the electroabsorption spectra indicates that the shorter diphenylpolyynes exhibit only the change in molecular polarizability, whereas the longer ones exhibit the change both in dipole moment and in molecular polarizability following absorption. The finding of the change in dipole moment following absorption of centrosymmetric diphenylpolyynes is interpreted in terms of the symmetry distortion upon doping a polymer film. When the external electric field is applied, the fluorescence yield is reduced and enhanced, respectively, in diphenylacetylene and diphenyloctatetrayne, indicating that the rate of the nonradiative process from the fluorescence state is accelerated in diphenylacetylene and decelerated in diphenyloctatetrayne by an external electric field. All of the diphenylpolyynes used in the present study exhibit the change in molecular polarizability following the phosphorescence process.     

Kinetic study in water-ethylene glycol cationic, zwitterionic, nonionic, and anionic micellar solutions

The spontaneous hydrolysis of phenyl chloroformate was studied in water-ethylene glycol, EG, cationic, zwitterionic, nonionic, and anionic micellar solutions, the surfactants being tetradecyltrimethylammonium bromide, tetradecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate, tricosaoxyethylene glycol ether, and sodium dodecyl sulfate. The dependence of the observed rate constant on surfactant concentration as well as on the percentage by weight of EG, varying from 0 to 50 wt %, was investigated. Information about changes in the critical micelle concentrations, in the micellar ionization degrees (for ionic surfactants), in the aggregation numbers, and in the polarity of the interfacial region of the micelles upon changing the weight percent of EG was obtained through conductivity, surface tension, spectroscopic, and fluorescence measurements. A simple pseudophase model was adequate to rationalize the kinetic data. Micellar medium effects were explained by considering charge-charge interactions and polarity, ionic strength, and water content in the micellar interfacial region. The acceleration of the reaction produced by an increase in the amount of EG present in the mixture was explained on the basis of the substantial decrease in the equilibrium binding constant of phenyl chloroformate molecules to the micelles, resulting in the contribution of the reaction taking place in the bulk water-EG phase being more important. The weight percent of EG did not substantially influence the rate constant in the micellar pseudophase.     

γ-irradiation of polypropylene in vacuum and in air

Polypropylene films were irradiated with ⁶⁰Co γ-rays in vacuum or in air and stored in air. Just after irradiation, the concentration of carbonyl group of the sample irradiated in air only increased with dose. The concentrations of both samples increased with storage time. The more the absorbed doses, the higher the increasing rates. The increasing rate of the concentration of carbonyl group during irradiation in air was higher than those during storage in air. Just after irradiation, the tensile strengths and the elongations of the both samples somewhat increased with dose at the doses less than 5 Mrad, but decreased at doses more than 13 Mrad. The tensile strength and the elongation of the sample irradiated in air decreased with storage time. Those of the sample irradiated in vacuum also decreased with storage time but the decreasing rates were much smaller than those in the sample irradiated in air. The gel fractions of the samples irradiated in vacuum and annealed in vacuum were somewhat higher than those irradiated in vacuum and not annealed. To elucidate high oxidation rate in the sample irradiated in air during and after irradiation, reaction mechanisms were discussed. To clarify the difference of mechanical properties between the samples irradiated in vacuum and in air, the effect of crosslink was considered, together with the oxidation.     

Histological study of some Echium vulgare, Pulmonaria officinalis and Symphytum officinale populations

Plants living in different ecological habitats can show significant variability in their histological and phytochemical characters. The main histological features of various populations of three medicinal plants from the Boraginaceae family were studied. Stems, petioles and leaves were investigated by light microscopy in vertical and transverse sections. The outline of the epidermal cells, as well as the shape and cell number of trichomes was studied in leaf surface casts. Differences were measured among the populations of Echium vulgare in the width and height of epidermis cells in the stem, petiole and leaf, as well as in the size of palisade cells in the leaves. Among the populations of Pulmonaria officinalis significant differences were found in the length of trichomes and in the slightly or strongly wavy outline of epidermal radial cell walls. Populations of Symphytum officinale showed variance in the height of epidermal cells in leaves and stems, length of palisade cells and number of intercellular spaces in leaves, and the size of the central cavity in the stem. Boraginaceae bristles were found to be longer in plants in windy/shady habitats as opposed to sunny habitats, both in the leaves and stems ofP. officinalis and S. officinale, which might be connected to varying levels of exposure to wind. Longer epidermal cells were detected in the leaves and stems of both E. vulgare and S. officinale plants living in shady habitats, compared with shorter cells in sunny habitats. Leaf mesophyll cells were shorter in shady habitats as opposed to longer cells in sunny habitats, both in E. vulgare and S. officinale. This combination of histological characters may contribute to the plant's adaptation to various amounts of sunshine. The reported data prove the polymorphism of the studied taxa, as well as their ability to adapt to various ecological circumstances.     

Sol-gel Transition of Methylcellulose Solution in the Coexistence of Hexadecyltrimethylammonium Bromide and Sodium Chloride

The sol-gel transition of methylcellulose (MC) solution in the presence of NaCl and hexade-cyltrimethylammonium bromide (HTAB), together with MC/NaCl solution in the presence of HTAB and MC/HATB solution in the presence of NaCl, was investigated by the rheolog-ical measurements. It has been found that the sol-gel transition temperature of MC solution decreases linearly with the concentration of NaCl in solution but increases linearly with the concentration of HTAB in solution, respectively. However, the sol-gel transition temperature of MC/NaCl solution in the presence of HTAB keeps the same value, independent of theconcentration of HTAB in solution. On the other hand, the sol-gel transition temperature of MC/HTAB solution decreases linearly with the concentration of NaCl in solution. The experimental results suggest that, for MC/NaCl solution in the presence of HTAB, the salt-induced spherical micelles of HTAB should have formed in bulk solution. For MC solution in the absence of NaCl, no spherical micelles have been formed in bulk solution, though the concentration of HTAB in our experiment is almost one order of magnitude higher than the critical micelle concentration of HTAB in polymer-free solution. In fact, due to adsorption of HTAB on MC chains, the realconcentration of HTAB in bulk solution, is much less than the apparent concentration of HTAB dissolved in MC solution.     

Changes in energy of three types of hydrogen bonds upon excitation of aminocoumarins determined from absorption solvatochromic experiments

Absorption spectra of 6-aminocoumarin (6AC) and 7-aminocoumarins (C120 and C151) were studied in polyfluorinated alcohols: (1,1,1,3,3,3-hexafluoroisopropanol (HFIP), 2,2,2-trifluoroethanol (TFE)), in water and in methanol, and compared to those taken in 1-chloro-n-alkanes. According to our results, the observed unusual blue-shift of a long-wavelength band in absorption spectra in strong protic solvents is direct evidence of significant weakening of a NH-O hydrogen bond. The results obtained for the aminocoumarins in HFIP, which in contrast to aliphatic alcohols does not form hydrogen bonds of the acceptor type, prove that the decrease in the energy of the NH-O hydrogen bond upon excitation to the lowest S(1)-LE state is significantly greater than the increase in the energy of hydrogen bonds made by the oxygen atom of carbonyl group OH-O. It is in contrast to theoretical calculations for C151 [Y. Liu, J. Ding, R. Liu, D. Shi and J. Sun, J. Photochem. Photobiol. A, 2009, 201, 203-207]. A comparison of the absorption spectra measured in DMSO and in 1-chloro-n-alkanes shows that the energy of two N-HO hydrogen bonds considerably increases as a result of excitation. These results are consistent with those of the theoretical calculations [Y. Liu, J. Ding, R. Liu, D. Shi and J. Sun, J. Photochem. Photobiol. A, 2009, 201, 203-207; P. Zhou, P. Song, J. Liu, K. Han and G. He, Phys. Chem. Chem. Phys., 2009, 11, 9440-9449]. In this study we applied the procedure proposed by us in J. Photochem. Photobiol. A, 2006, 184, 250-264 for the determination of changes in hydrogen bond energy as a result of electronic excitation based on analysis of the absorption spectra of the probe studied in the solvents interacting with it exclusively nonspecifically and in those forming hydrogen bonds with it.     

Separation characteristics of air by polysulfone hollow fiber membranes in series

Characteristics of air separation are determined in a serial configuration of hollow fiber polysulfone membranes. One, two, and three separation cells in series are used in the measurements. All systems are operated in the counter-current flow mode and effects of the reject flow rate and feed pressure are considered in the measurements. The plug flow model is used to simulate and analyze the system. Results include variations in species permeance, stage cut, permeate enrichment, reject depletion, and recovery of oxygen and nitrogen gases. Most of the plug flow model predictions are found to closely match the measured data, with deviations less than 10%. However, deviations in N₂ recoveries are found to be larger than other system parameters, with deviations close to 30%. Increase of the number of separation cells results in higher stage cuts and in turn to higher species recovery in the permeate stream. Simultaneously, the purity of the reject is increased and that of the permeate stream is decreased. At constant reject flow rate, the highest permeate enrichment is found in the permeate stream of the first cell in the two- and three-cell systems. This is caused by the increase in the feed flow rate, which results in reduction of the gas residence time and in turn the gas permeation is highly selective and is dominated by the fast permeating species O₂.     

中性溶质在反相毛细管电色谱中的保留行为

分别在以甲醇、乙腈、异丙醇和四氢呋喃为有机改性剂的４种二元流动相体系中对中性溶质在反相毛细管电色谱中的保留行为进行了研究。不仅考察了有机改性剂的种类和浓度对电渗淌度的影响,而且建立了溶质容量因子与有机改性剂在流动相中体积分数间的定量关系,此外还对样品在反相毛细管电色谱和反相毛细管高效液相色谱中的保留行为进行了比较,发现中性溶质在这两种分离模式中的容量因子基本相同。     

Simultaneous liquid chromatographic determination of 39 polycyclic aromatic hydrocarbons in indoor and outdoor air and application to a survey on indoor air pollution in Fuji, Japan

An analytical method was established for the simultaneous determination of 39 polycyclic aromatic hydrocarbons (PAHs) in air. The method was applied to a survey of gaseous and particulate PAHs in household indoor air. The survey was performed in 21 houses in the summer of 1999 and in 20 houses in the winter of 1999-2000 in Fuji, Japan. Thirty-eight PAHs were determined in indoor and outdoor air in the summer, and 39 PAHs were determined in indoor and outdoor air in the winter. The concentrations of gaseous PAHs in indoor air tended to be higher than those in outdoor air in the summer and winter. The concentrations of particulate PAHs in indoor air were the same as or lower than those in outdoor air in the summer and winter. PAH profiles, correlations between PAH concentrations, and multiple regression analysis were used to determine the factors affecting the indoor PAH concentrations. These results showed that gaseous PAHs in indoor air were primarily from indoor emission sources, especially during the summer, and that indoor particulate PAH concentrations were significantly influenced by outdoor air pollution.