Theoretical study of the two-photon absorption properties of octupolar complexes with Cu(I), Zn(II) and Al(III) as centers and bis-cinnamaldimine as ligands

The equilibrium geometries, electronic structures, one- and two-photon absorption (TPA) properties of a series of octupolar complexes with the Cu(I), Zn(II) and Al(III) as coordinate centers and the bis-cinnamaldimine as ligands have been studied using the B3LYP/6-31G(d) and ZINDO-SOS methods. Compared with the dipolar metal complexes, all the octupolar metal complexes (including tetrahedral and octahedral complexes) have relatively large TPA cross-sections, indicating that building octupolar metal complex is an effective route to design of promising TPA material. Lewis acidity of metal center and molecular symmetry are two important factors for enhancement of TPA cross-section of metal complex. Due to the stronger Lewis acidity of Zn(II) than Cu(I) as well as Al(III) than Zn(II), the tetrahedral Zn(II) complex exhibits a TPA cross-section larger than that of the tetrahedral Cu(I) complex, the maximum TPA position of the octahedral Al(III) complex is red-shifted relative to the octahedral Zn(II) complex, and at the same time, the octahedral Al(III) complex has a large TPA cross-section. Compared with the tetrahedral complexes, the TPA cross-sections of the octahedral complexes are enhanced due to the increased number of ligands.     

Solvent extraction of copper(II), nickel(II), cobalt(II), zinc(II), and iron(Ill) by high molecular weight hydroxyoximes

The effects of pH have been examined on the extraction of the title ions by complexing with LIX-64N in kerosene. The extent of metal extraction as a function of pH is: Cu(II) < Fe(III) < Ni(II) < Zn(II) < Co(II). Stripping of all metal ions but cobalt with sulphuric acid from loaded kerosene complexing solutions is easily accomplished. Oxidation of Co(II) to Co(III) in the organic phase prevents stripping of this metal ion.     

Molecular structure of cyanidin metal complexes: Al(III) versus Mg(II)

Metal complexation by anthocyanins is a very efficient mechanism for protecting plants. While Mg is an essential metal for life, typically found bound to anthocyanins, Al interferes with the metabolism of the former. Density functional theory and the polarizable continuum model are used to study cyanin (the simplest anthocyanin bearing a catechol unit) complexes with Mg(II) and Al(III), considering different metal ligand stoichiometries. Results obtained for metal-binding energies indicate that Al(III) complexes are always more stable than those of Mg(II). Furthermore, reaction energies for the metal exchange process show that free Al(III) (hexaaquo complex) is always able to displace Mg(II). This displacement is more favored when the metal ligand ratio decreases. Thus, anthocyanins are implied in suppressing Al(III) toxicity by enabling its accumulation and reducing its migration to ecosystems. The characteristics of Al(III)?Ccyanidin and Mg(II)?Ccyanidin bonds are investigated using the quantum theory of atoms in molecules. We find these complexes are more stabilized by ion?Cdipole electrostatic interactions than by electron pair sharing, as predicted by the Hard and Soft Acids Theory. Globally, two factors increase the covalent character: replacement of Mg(II) by Al(III) and replacement of water by cyanidin ligands.     

Solvent extraction of Zn(II), Cu(II) and Sb(III) with N-m-tolyl-p-methoxybenzohydroxamic acid (TMBHA) into chloroform

Rapid methods have been described for the quantitative extraction of milligram amounts of Zn(II), Cu(II) and Sb(III) with TMBHA into chloroform. The separation factor for many elements was found to be at least greater than 10⁴. The metal: reagent stoichiometry determined by methods like slope ratio, mole ratio and substoichiometric extraction were found to be 12 for Zn(II) and Cu(II), and 23 for Sb(III).     

Chemically modified silica gel with p-dimethylaminobenzaldehyde for selective solid-phase extraction and preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) by ICP-OES

Silica gel-bound amines phase modified with p-dimethylaminobenzaldehyde (p-DMABD) was prepared based on chemical immobilization technique. The product (SG-p-DMABD) was used as an adsorbent for the solid-phase extraction (SPE) Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) prior to their determination by inductively coupled plasma optical emission spectrometry (ICP-OES). The uptake behaviors of SG-p-DMABD for extracting these metal ions were studied using batch and column procedures. For the batch method, the optimum pH range for Cr(III) and Ni(II) extraction was ≥ 3, for Cu(II), Pb(II) and Zn(II) extraction it was ≥ 4. For simultaneous enrichment and determination of all the metals on the newly designed adsorbent, the pH value if 4.0 was selected. All the metal ions can be desorbed with 2.0 mL of 0.5 mol L^− 1 of HCl. The results indicate that SG-p-DMABD has rapid adsorption kinetics using the batch method. The adsorption capacity for these metal ions is in the range of 0.40-1.15 mmol g^− 1, with a high enrichment factor of 125. The presence of commonly coexisting ions does not affect the sorption capacities. The detection limits of the method were found to be 1.10, 0.69, 0.99, 1.10 and 6.50 μg L^− 1 for Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 5.0% (n = 8) for all metal ions. The method was applied to the preconcentration of Cr(III), Cu(II), Ni(II), Pb(II) and Zn(II) from the certified reference material (GBW 08301, river sediment) and water samples with satisfactory results.     

Mixed metal hydroxycarboxylic acid complexes. Spectrophotometric study of complexes of U(VI) with In(III), Cu(II), Zn(II) and Cd(II)

The formation of mixed metal complexes between uranium (VI), as the central metal ion, and aluminium (III), indium (III), copper (II), zinc (II) and cadmium (II), as the additional metal ions, with a hydroxycarboxylic acid chosen between citric, tartaric or malic, has been studied using spectrophotometric methods.The effect of pH has been examined, and the results show that at pH=4 stable complexes are formed for most of the systems. At this pH the method of mole ratio and Job's method of continuous variations, were employed to determine the stoichiometry of the mixed metal complexes. Al(III), In(III) and Cu(II) showed a high tendency to form mixed metal complexes with U(VI), while the formation of complexes is uncertain for Cd(II) and Zn(II). The ratio of the ligand to the total metal ion has been found to be 21 and metal:metal ratios of 11 and 12 have been observed.Represents part of the Ph.D. thesis submitted by Emanuel Manzurola to Ben Gurion University of the Negev.     

Radiation effects on the extraction of americium(III) with di(2-ethylhexyl) phosphoric acid

Radiation effects on the extraction of Am(III) with di (2-ethylhexyl) phosphoric acid (DEHPA) was studied by exposing DEHPA to gamma rays under various conditions. Gamma irradiation of undiluted DEHPA causes an enhancement of extraction of Am(III) due to the formation of mono (2-ethylhexyl) phosphoric acid (MEHPA) similarly to that of Nd(III). The presence of diluent during irradiation brought about a slight difference from the results in the absence of a diluent. The marked change occurred in Df when the organic solvent was exposed to γ-ray while being mixed with nitric acid solution. An initial slight increase of Df for Am(III) and Nd(III) was followed by a subsequent decrease beyond an absorbed dose of approximately 200 Wh·1⁻¹. This phenomenon was explained by the enhanced decomposition of DEHPA and the subsequent strong hydrolytic and radiolytic decomposition of MEHPA to H₃PO₄ in the aqueous phase, and the complex forming nature of H₃PO₄ with Am(III) and Nd(III).     

Extraction of lutetium(III) from aqueous solutions by employing a single fibre‐supported liquid membrane

Transport behaviour of Lu(III) across a polypropylene hollow fibre‐supported liquid membrane containing di(2‐ethylhexyl)phosphoric acid (DEHPA) in dihexyl ether as a carrier has been studied. The donor phase was LuCl₃ in the buffer solution consisting of 0.2 M sodium acetate at pH 2.5–5.0. A miniaturised system with a single hollow fibre has been operated in a batch mode. The concentration of Lu(III) was determined by indirect voltammetric method using Zn–EDTA complex. The effect of pH and volume of the donor phase, DEHPA concentration in the organic (liquid membrane) phase, the time of extraction and the content of the acceptor phase on the Lu(III) extraction and stripping behaviour was investigated. The results were discussed in terms of the pertraction and removal efficiency, the memory effect and the mean flux of Lu(III). The optimal conditions for the removal of ¹⁷⁷Lu(III) from labelled ¹⁷⁷Lu‐radiopharmaceuticals were discussed and identified. The removal efficiency of Lu(III) greater than 99% was achieved at pH of the donor phase between 3.5 and 5.0 using DEHPA concentration in the organic phase of 0.47 M and the ratio of the donor to the acceptor phase of 182.     

Extraction of cadmium(II) by organophosphorus compounds

The extraction of cadmium(II) by di-(2-ethylhexyl) phosphoric acid dissolved in tetradecane from aqueous chloride and perchlorate solutions has been studied at 25°C. The distribution of the metal has been determined as a function of metal and DEHPA concentrations. Distribution data have been treated both graphically and numerically using the program LETAGROP-DISTR (Acta Chem. Scand. 1971, 25, 1521) and the composition of the extracted species into the organic phase has been determined. The extraction constants for these species are given in Table 1.     

Salisaldehyde-2-aminobenzimidazole schiff base complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II)

New metal complexes of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) with salicylidine-2-aminobenzimidazole (SABI) are synthesized and their physicochemical properties are investigated using elemental and thermal analyses, IR, conductometric, solid reflectance and magnetic susceptibility measurements. The base reacts with these metal ions to give 1:1 (Metal:SABI) complexes; in cases of Fe(III), Co(II), Cu(II), Zn(II) and Cd(II) ions; and 1:2 (Metal:SABI) complexes; in case of Ni(II) ion. The conductance data reveal that Fe(III) complex is 2:1 electrolyte, Co(II) is 1:2 electrolyte, Cu(II), Zn(II) and Cd(II) complexes are 1:1 electrolytes while Ni(II) is non-electrolyte. IR spectra showed that the ligand is coordinated to the metal ions in a terdentate mannar with O, N, N donor sites of the phenloic -OH, azomethine -N and benzimidazole -N3. Magnetic and solid reflectance spectra are used to infer the coordinating capacity of the ligand and the geometrical structure of these complexes. The thermal decomposition of the complexes is studied and indicates that not only the coordinated and/or crystallization water is lost but also that the decomposition of the ligand from the complexes is necessary to interpret the successive mass loss. Different thermodynamic activation parameters are also reported, using Coats-Redfern method. This revised version was published online in July 2006 with corrections to the Cover Date.     

Solvent extraction of Ni(II) from sulfate solutions with LIX 84I: flow-sheet for the separation of Cu(II), Ni(II) and Zn(II).

This paper reports on solvent-extraction studies of Ni(II) from sulfate solutions with LIX 84I (2-hydroxy-5-nonylacetophenoneoxime) as the extractant. The extraction of metal depends on the equilibrium pH of the aqueous phase and the extractant concentration. The transfer of metal follows a cation exchange-type mechanism: Ni2+ + 2HA --> NiA2 + 2H+. Extraction varies with the nature of the diluents. Temperature has no effect on the extraction of metal. The extraction behavior of associated metals clearly demonstrates the application of LIX 84I as the extractant for the separation of Cu(II), Ni(II) and Zn(II). Based on the results, a flow sheet of the process was developed.     

A new chelating resin for preconcentration and determination of Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) by flame atomic absorption spectrometry

A new polychelatogen, AXAD-16-1,2-diphenylethanolamine, was developed by chemically modifying Amberlite XAD-16 with 1,2-diphenylethanolamine to produce an effective metal-chelating functionality for the preconcentration of Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II) and their determination by flame atomic absorption spectrometry. Various physiochemical parameters that influence the quantitative preconcentration and recovery of metal were optimized by both static and dynamic techniques. The resin showed superior extraction efficiency with high-metal loading capacity values of 0.73, 0.80, 0.77, 0.87, 0.74, and 0.81 mmol/g for Mn(II), Ni(II), Cu(II), Zn(II), Cd(II), and Pb(II), respectively. The system also showed rapid metal-ion extraction and stripping, with complete saturation in the sorbent phase within 15 min for all the metal ions. The optimum condition for effective metal-ion extraction was found to be a neutral pH, which is a great advantage in the preconcentration of trace metal ions from natural water samples without any chemical pretreatment of the sample. The resin also demonstrated exclusive ion selectivity toward targeted metal ions by showing greater resistivity to various complexing species and more common metal ions during analyte concentration, which ultimately led to high preconcentration factors of 700 for Cu(II); 600 for Mn(II), Ni(II), and Zn(II); and 500 for Cd(II) and Pb(II), arising from a larger sample breakthrough volume. The lower limits of metal-ion detection were 7 ng/mL for Mn(II) and Ni(II); 5 ng/mL for Cu(II), Zn(II), and Cd(II), and 10 ng/mL for Pb(II). The developed resin was successful in preconcentrating metal ions from synthetic and real water samples, multivitamin-multimineral tablets, and curry leaves (Murraya koenigii) with relative standard deviations of < or = 3.0% for all analytical measurements, which demonstrated its practical utility.     

A modern approach for the sensing of aqueous Al(III) ion by Ni(II) Salen‐type Schiff base complexes

In this work, we explore a modern concept of transmetalation (metal exchange) for the effective recognition of aqueous Al(III) ion. Three different Ni(II) salen‐type Schiff base complexes with different spacer diimine groups were prepared for the metal exchange reaction. These probes recognize Al(III) both colorimetically as well as fluorimetrically. The efficiency in sensing is mainly due to the low emission characteristics of the respective Ni(II) complexes which results in enhanced emission on the formation of Al(III) complex. The geometry of the central Ni(II) metal ion in the probe plays a pivotal role in the sensing action with the highest sensitivity being shown by the Ni(II) metal center with distorted square pyramidal geometry. Further DFT calculations and the energetics involved in the sensing mechanism via the formation of Al(III) complexes substantiates the experimental results.     

A fluorescent sensor for aluminum(III), magnesium(II), zinc(II) and cadmium(II) based on electrostatically immobilized quinolin-8-ol sulfonate

An optical sensor responding to Al(III), Mg(II), Zn(II) and Cd(II) is prepared by immobilizing quinolin-8-ol-5-sulfonate (QS) on an ion-exchange resin and attaching the resin to the end of a trifurcated fiber-optic bundle. Immobilization leads to weak fluorescence from QS and causes shifts in the fluorescence spectra of the QS/metal complexes. Detection limits for the metal ions studied are all below 1 × 10^?6 M. Response to metal ion concentration is nonlinear. The shape of the response fits a model that assumes a 1:1 metal/QS chelate is formed. Forrnation constants for immobilized QS complexes calculated from the model are similar to those observed for dissolved QS. Immobilized and dissolved QS behave similarly with respect to pH and interferences.     

Tetrakis(thiadiazole)porphyrazines. 8. Singlet oxygen production, fluorescence response and liposomal incorporation of tetrakis(thiadiazole)porphyrazine macrocycles [TTDPzM] (M = Mg(II)(H2O), Zn(II), Al(III)Cl, Ga(III)Cl, Cd(II), Cu(II), 2H(I))

The photoactivity for the generation of singlet oxygen, (1)O(2), the key cytotoxic agent in the anticancer treatment known as photodynamic therapy (PDT), and the fluorescence response of the highly electron-deficient tetrakis(thiadiazole)porphyrazines of formula [TTDPzM] (M = Mg(II)(H(2)O), Zn(II), Al(III)Cl, Ga(III)Cl, Cd(II), Cu(II), 2H(I)) were examined (c ? 10(-5) M) in dimethylformamide (DMF) and/or in DMF preacidified with HCl (DMF/HCl; [HCl] = 1-4 × 10(-4) M). The singlet oxygen quantum yield (Φ(Δ)) of all the compounds was determined by using a widely employed procedure based on the selective oxidation of the 1,3-diphenylisobenzofuran (DPBF), modified in part as reported. The list of the Φ(Δ) values indicates excellent photosensitizing properties for the series of compounds carrying "closed shell" metal ions, with values measured in DMF/HCl respectful of the "heavy atom effect" for the first four lighter centers, increasing in the order Mg(II) < Al(III) < Zn(II) < Ga(III). Data of Φ(Δ) concerning the unmetalated species [TTDPzH(2)], present in solution in the form of the corresponding anion [TTDPz](2-), and the Cd(II) and Cu(II) complexes are also presented and discussed. Extensive discussion is also developed on the fluorescence quantum yield values Φ(F), with data on the Mg(II) and Al(III) compounds in DMF/HCl (0.44 and 0.53, respectively) indicative of promising perspectives for applications in fluorescence imaging techniques. The Φ(F) data of the studied porphyrazine series, Φ(F)(Pz), correlate linearly with those of the homologous phthalocyaninato complexes, Φ(F)(Pc), suggesting a closely similar behaviour between the two classes of compounds. The incorporation of [TTDPzZn] into liposomes was successfully achieved following the detergent depletion method (DDM) from a mixed micellar solution by means of gel-filtration. Retention of [TTDPzZn] (~40%) in its photoactive monomeric form into liposomes is proved by absorption and fluorescence spectra, this proposing the Zn(II) complex as a promising candidate for use in PDT.     

Interactions of pyridinecarboxylic acid chelators with brain metal ions: Cu(II), Zn(II), and Al(III)

Abstract  

The interactions of Cu(II), Zn(II), and Al(III) with 1,6-dimethyl-4-hydroxy-3-pyridinecarboxylic acid (DQ716) and 2,6-dimethyl-3-hydroxy-4-pyridinecarboxylic acid (DT726), possible chelating agents in Alzheimer’s disease, were investigated in aqueous solution. The proton dissociation constants of the ligands, the stability constants, and the coordination modes of the metal complexes formed were determined by pH-potentiometric, UV–vis spectrophotometric, and ¹H NMR methods. The nitrogen of the pyridine ring changes the proton affinity of the carboxylate and phenolate moieties and these pyridine derivatives form stronger complexes with Cu(II), Zn(II), and Al(III) than salicylic acid. Interactions of the ligands with human serum albumin as their potential transporter in blood were investigated at physiological pH through ultrafiltration by UV–vis and fluorescence spectroscopy.     

4-Hydroxy-3,5-pyridinedicarboxylic Acids: Synthesis,Complexation Properties Towards Fe(III), Al(III), Cu(II), Zn(II), Human Serum Albumin,and Cellular Toxicity

4-hydroxy-3,5-pyridinedicarboxylic acid (DQ58) and 4-hydroxy-1-methyl-3,5-pyridinedicarboxylic acid (DQ71508) have been synthesized, and their Fe(III), Al(III), Cu(II), and Zn(II) coordination properties have been studied by potentiometry, UV–Vis spectroscopy (in the case of Fe(III), Al(III), Cu(II)), ¹H-NMR (for Al(III)) and EPR (for Cu(II)). The thermodynamic results were used to model the extent of the toxic metal ions decorporation (Fe(III) or Al(III)) in the presence of the essential metal ions (Cu(II) or Zn(II)). DQ58 and DQ71508 were demonstrated to interact with human serum albumin (HSA), which is assumed to be the main serum transporter of the chelators, and binding constants have been obtained by ultrafiltration. IC₅₀ values of 5.185 × 10^?3 and 1.033 × 10^?3 mol·L^?1 were collected after 24 and 48 h of treatment with DQ71508 towards human embryonic kidney HEK-293 cells, demonstrating the relatively low cytotoxicity of this compound. According to these results, both DQ58 and DQ71508 seem to be potential candidates for Fe chelation therapy, and DQ58 is a better Fe(III) chelator than DQ71508.     

Effect of radiolysis products of di-(2-ethylhexyl)phosphoric acid upon the extraction of lanthanides

In order to clarify the influence of radiation degradation of DEHPA upon the extraction of lanthanides, the extraction of neodymium(III) was studied using DEHPA, MEHPA, 2-ethylhexanol and γ-ray irradiated DEHPA. The most significant effect of DEHPA radiolysis on the extraction was found to be the enhacement of extraction capability mainly due to the primary radiolysis product MEHPA. 2-Ethylhexanol, another radiolysis product, showed a depressant effect on DEHPA-Nd(III) extraction. However, the mixture of MEHPA and 2-ethylhexanol improved the extraction. The mixed solvent DEHPA-MEHPA was found to be more effective than the individual components for lanthanide extraction.     

Simultaneous spectrophotometric determination of Fe(III), Al(III) and Cu(II) by partial least-squares calibration method

A spectrophotometric method for simultaneous determination of Fe(III), Al(III) and Cu(II) using Alizarin Red S as a chelating agent was developed. The parameters controlling behavior of the system were investigated and optimum conditions were selected. A partial least-squares multivariate calibration method was used for the analysis of ternary mixtures of Fe(III), Al(III) and Cu(II) over the range of 450-6000, 140-4000 and 450-15000 ng ml(-1), respectively. Absorbance data were taken between 400 and 800 nm. Applying this method to simultaneous determination of these metal ions in several synthetic alloy solutions with total relative standard error of less than 5% validated the proposed method.     

Synthesis, spectral and electrochemical properties of Al(III) and Zn(II) complexes with flavonoids

The synthesis, electrochemical and spectral (UV-vis, 1H NMR, IR, fluorescence) properties as well as thermal behaviors of Al(III) and Zn(II) complexes with the flavonoids quercetin (H2L(1)), rutin (H2L(2)) and galangin (HL(3)) are presented. The complexes may be formulated as [Al2(L(1))(H2O)8]Cl4, [Al3(L(2))2(H2O)12]Cl5, [Al(L(3))(H2O)4]Cl2, [Zn2(L(1))(H2O)4]Cl2, [Zn3(L(2))2(H2O)6]Cl2 and [Zn(L(3))(H2O)2]Cl. The higher fluorescence intensities of the complexes related to the free flavonoids, are attributed to the coordination of the ligands to the small, highly charged Al(III) and Zn(II) ions. The coordination effectively increases the rigidity of the ligand structure and increases the fluorescence quantum yield by reducing the probability of non-radiative energy dissipation process. Antioxidant activities of the compounds were also investigated under an electrochemical point of view. The cyclic voltammetric data show a considerable decrease of the oxidation potentials of the complexes related to that of the free flavonoids. Thus, the flavonoid-metal complexes are more effective antioxidants than the free flavonoids.