Supported catalysts based on Pd–In nanoparticles for the liquid- phase hydrogenation of terminal and internal alkynes: 2. catalytic properties

Pd–In/Al₂O₃ and Pd–In/MgAl₂O₄ catalysts prepared from dinuclear Pd–In acetate complexes were studied in the hydrogenation of alkyne compounds with different structures. The Pd–In catalysts demonstrate high selectivity in the hydrogenation of internal alkynes comparable with that of the Lindlar catalyst. Similar activity/selectivity characteristics are reached at a significantly lower Pd content. For terminal alkynes, the favorable effect of Indium introduction is considerably less pronounced. An analysis of the In effect on the selectivity and the ratio between the rates of the first and second hydrogenation steps suggests that the reaction selectivity is determined to a large extent by a thermodynamic factor (adsorption–desorption equilibrium between the reactants and the reaction products).     

An Alkene‐Promoted Borane‐Catalyzed Highly Stereoselective Hydrogenation of Alkynes to Give Z‐ and E‐Alkenes

The stereoselective hydrogenation of alkynes to alkenes is an extremely useful transformation in synthetic chemistry. Despite numerous reports for the synthesis of Z‐alkenes, the hydrogenation of alkynes to give E‐alkenes is still not well resolved. In particular, selective preparation of both Z‐ and E‐alkenes by the same catalytic hydrogenation system using molecular H₂ has rarely been reported. In this paper, a novel strategy of using simple alkenes as promoters for the HB(C₆F₅)₂‐catalyzed metal‐free hydrogenation of alkynes was adopted. Significantly, both Z‐ and E‐alkenes can be furnished by hydrogenation with molecular H₂ in high yields with excellent stereoselectivities. Further experimental and theoretical mechanistic studies suggest that interactions between H and F atoms of the alkene promoter, borane intermediate, and H₂ play an essential role in promoting the hydrogenolysis reaction.     

Colloid and nanosized catalysts in organic synthesis: XI. Hydrogenation of alkynes catalyzed by nickel nanoparticles

The reaction of alkynes with hydrogen under atmospheric pressure in the presence of nickel nanoparticles as a catalyst led to the exhaustive hydrogenation of the triple bond.     

Palladium-Catalyzed Carbo-Oxygenation of Propargylic Amines using in Situ Tether Formation

1,2-Amino alcohols and α-aminocarbonyls are frequently found in natural products, drugs, chiral auxiliaries, and catalysts. This work reports a new method for the palladium-catalyzed oxyalkynylation and oxyarylation of propargylic amines. The reaction is perfectly regioselective based on the in situ introduction of a hemiacetal tether derived from trifluoroacetaldehyde. cis-Selective carbo-oxygenation was achieved for terminal alkynes, whereas internal alkynes gave trans-carbo-oxygenation products. The obtained enol ethers could be easily transformed into 1,2-amino alcohols or α-amino ketones using hydrogenation or hydrolysis, respectively.     

Encapsulation of Palladium Carbide Subnanometric Species in Zeolite Boosts Highly Selective Semihydrogenation of Alkynes

The selective hydrogenation of alkynes to alkenes is a crucial step in the synthesis of fine chemicals. However, the widely utilized palladium (Pd)-based catalysts often suffer from poor selectivity. In this work, we demonstrate a carbonization-reduction method to create palladium carbide subnanometric species within pure silicate MFI zeolite. The carbon species can modify the electronic and steric characteristics of Pd species by forming the predominant Pd−C₄ structure and, meanwhile, facilitate the desorption of alkenes by forming the Si−O−C structure with zeolite framework, as validated by the state-of-the-art characterizations and theoretical calculations. The developed catalyst shows superior performance in the selective hydrogenation of alkynes over mild conditions (298 K, 2 bar H₂), with 99 % selectivity to styrene at a complete conversion of phenylacetylene. In contrast, the zeolite-encapsulated carbon-free Pd catalyst and the commercial Lindlar catalyst show only 15 % and 14 % selectivity to styrene, respectively, under identical reaction conditions. The zeolite-confined Pd-carbide subnanoclusters promise their superior properties in semihydrogenation of alkynes.     

3 d Transition Metal‐Catalyzed Hydrogenation of Nitriles and Alkynes

Selective hydrogenation of nitriles and alkynes is crucial considering the vast applications of reduced products in industries and in the synthesis of bioactive compounds. Particularly, the late 3d transition metal catalysts (manganese, iron, cobalt, nickel and copper) have shown promising activity for the hydrogenation of nitriles to primary amines, secondary amines and imines. Similarly, semihydrogenation of alkynes to E‐ and Z‐alkenes by 3d metals is adequately successful both via the transfer hydrogenation and by using molecular hydrogen. The emergence of 3d transition metals in the selective synthesis of industrially relevant amines, imines and alkenes makes this protocol more attractive. Herein, we provide a concise overview on the late 3d transition metal‐catalyzed hydrogenation of nitriles to amines and imines as well as semihydrogenation of alkynes to alkenes.     

A General One-Pot Methodology for the Preparation of Mono- and Bimetallic Nanoparticles Supported on Carbon Nanotubes: Application in the Semi-hydrogenation of Alkynes and Acetylene

A facile and straightforward methodology for the preparation of monometallic (copper and palladium) and bimetallic nanocatalysts (NiCu and PdCu) stabilized by a N-heterocyclic carbene ligand is reported. Both colloidal and supported nanoparticles (NPs) on carbon nanotubes (CNTs) were prepared in a one-pot synthesis with outstanding control on their size, morphology and composition. These catalysts were evaluated in the selective hydrogenation of alkynes and alkynols. PdCu/CNTs revealed an efficient catalytic system providing high selectivity in the hydrogenation of terminal and internal alkynes. Moreover, this catalyst was tested in the semi-hydrogenation of acetylene in industrially relevant acetylene/ethylene-rich model gas feeds and showed excellent stability even after 40 h of reaction.     

Preparation of monoalkylpiperidines via the mild hydrogenation of monoalkynylpyridines

Monoalkynylpyridines were prepared via a Sonogashira cross-coupling reaction between monoiodopyridines and alkynes. Mild hydrogenation of the obtained monoalkynylpyridines was then conducted to produce the corresponding monoalkylpiperidines in moderate to excellent yields. The hydrogenation reaction was carried out under H₂ (1 atm) in the presence of 10 wt% Pd/C (5 eq) in either AcOH or MeOH at room temperature. The present mild method is therefore useful for the quick and easy preparation of monoalkylpiperidines.     

含茂基稀土金属有机络合物催化剂在有机合成中的应用

综述了含茂基稀土金属有机络合物催化下的不饱和烃（或其取取衍生物）转化反应及其在有机合成中的作用。重点阐述了含茂基稀土金属有机络合物催化的烯烃氧化，氢化环化；烯烃和炔烃的氢化硅化，1，5－或1，6－二烯或烯炔的氢化硅化／环化，氨基取代烯烃，炔烃，丙二烯等的氢化胺化／环化等反应在有机合成中的主要用途，这些反应在形成碳－杂原子键，碳－碳键，碳环和杂环等方面具有广泛的应用前景。讨论了这些反应的催化循环机制，区域稳定性，对映选择性，非对映选择性及其影响因素。     

Characterization of a Polymer-Bound Palladium Acetate Catalyst and Studies on the Selective Hydrogenation of Dienes and Alkynes

Abstract

Palladium(II) acetate has been anchored onto a copolymer support containing pyridyl and carboxyl groups. XPS studies showed the Pd 3d binding energies for the recovered catalyst to be less by 1 eV after being used in hydrogenation studies. However, x-ray studies and a chemical test based on KCN treatment failed to reveal any palladium oxide or palladium metal formation in the recovered catalyst. It is presumed that an acetate ligand is lost during hydrogenation, which could be the reason for the lowering of the palladium 3d binding energies in the recovered catalyst. Results of investigations of the hydrogenation of olefins and selectivity of the catalyst toward the hydrogenation of dienes and alkynes are presented. The loss of palladium due to leaching under the reaction conditions employed was found to be very low (<1%/cycle).     

聚合物负载贵金属催化剂的合成及其在氢化反应中的应用进展

聚合物负载贵金属催化剂大多具有良好的光学催化活性,并且反应后容易从反应物中分离,重复实用性高,成为近年来人们研究的热点。常见的聚合物载体主要为有机聚合物及多种无机-有机杂化材料。本文主要按聚合物载体种类的不同,综述了聚合物负载Pt、Pd、Rh等贵金属催化剂的制备方法及其在烯烃、二烯烃、炔烃和硝基芳香化合物等物质的催化氢化中的应用情况。同时,对以树形分子为载体的催化剂、负载多元金属催化剂以及负载金型催化剂的研究及应用情况也进行了总结和评述。     

Catalytic Transfer Hydrogenation of Arenes and Heteroarenes

Transfer hydrogenation reactions are of great interest to reduce diverse molecules under mild reaction conditions. To date, this type of reaction has only been successfully applied to alkenes, alkynes and polarized unsaturated compounds such as ketones, imines, pyridines, etc. The reduction of benzene derivatives by transfer hydrogenation has never been described, which is likely due to the high energy barrier required to dearomatize these compounds. In this context, we have developed a catalytic transfer hydrogenation reaction for the reduction of benzene derivatives and heteroarenes to form complex 3-dimensional scaffolds bearing various functional groups at room temperature without needing compressed hydrogen gas.     

Ethanol as a Hydrogenating Agent: Palladium-Catalyzed Stereoselective Hydrogenation of Ynamides To Give Enamides

Ethanol is shown to act as a hydrogenating agent for ynamides under palladium catalysis. This behavior is different from the normally expected reaction of ethanol addition to alkynes. The reaction shows stereoselectivity for E enamides, which is in contrast to reports using other hydrogenating sources. The method was also extended to ynamines. Alternatively, the use of ethanol and ammonium formate as the hydrogenating source gives Z enamides. The role of ethanol in hydrogenation was demonstrated by means deuterium labeling experiment.     

Hydrogenation of alkenes and alkynes on Pd-polyheteroarylene catalysts treated with sodium borohydride

As a result of treatment with sodium borohydride, Pd(0)-polyheteroarylene catalysts for the hydrogenation of unsaturated compounds acquire the capability for selective hydrogenation of alkynes as a result of suppressing processes of hydrogen addition to the double bond of the olefins and dienes that are obtained by reduction of the alkynes.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 9, pp. 1961–1967, September, 1989.     

Highly efficient and diastereoselective gold(I)-catalyzed synthesis of tertiary amines from secondary amines and alkynes: substrate scope and mechanistic insights

An efficient method for the synthesis of tertiary amines through a gold(I)‐catalyzed tandem reaction of alkynes with secondary amines has been developed. In the presence of ethyl Hantzsch ester and [{(tBu)₂(o‐biphenyl)P}AuCl]/AgBF₄ (2 mol %), a variety of secondary amines bearing electron‐deficient and electron‐rich substituents and a wide range of alkynes, including terminal and internal aryl alkynes, aliphatic alkynes, and electron‐deficient alkynes, underwent a tandem reaction to afford the corresponding tertiary amines in up to 99 % yield. For indolines bearing a preexisting chiral center, their reactions with alkynes in the presence of ethyl Hantzsch ester catalyzed by [{(tBu)₂(o‐biphenyl)P}AuCl]/AgBF₄ (2 mol %) afforded tertiary amines in excellent yields and with good to excellent diastereoselectivity. All of these organic transformations can be conducted as a one‐pot reaction from simple and readily available starting materials without the need of isolation of air/moisture‐sensitive enamine intermediates, and under mild reaction conditions (mostly room temperature and mild reducing agents). Mechanistic studies by NMR spectroscopy, ESI‐MS, isotope labeling studies, and DFT calculations on this gold(I)‐catalyzed tandem reaction reveal that the first step involving a monomeric cationic gold(I)–alkyne intermediate is more likely than a gold(I)–amine intermediate, a three‐coordinate gold(I) intermediate, or a dinuclear gold(I)–alkyne intermediate. These studies also support the proposed reaction pathway, which involves a gold(I)‐coordinated enamine complex as a key intermediate for the subsequent transfer hydrogenation with a hydride source, and reveal the intrinsic stereospecific nature of these transformations observed in the experiments.     

Selective iron-catalyzed transfer hydrogenation of terminal alkynes

A novel iron-catalyzed transfer hydrogenation of alkynes to the corresponding alkenes applying formic acid as a hydrogen donor is reported. An in situ combination of Fe(BF(4))(2)·6H(2)O and tetraphos allows for highly selective hydrogenation of a broad range of aromatic and aliphatic alkynes tolerating different functional groups.     

选择加氢催化剂结构与性能的研究进展

选择加氢催化剂是石油化工领域一类重要的催化剂,广泛应用于各类乙烯装置中C2、C3、C4等组分以及裂解汽油中炔烃和二烯烃的脱除等领域.本文从制备与处理方法、助剂、载体、活性中心结构形态、反应机理、非Pd催化剂6个方面,对近5年来选择加氢催化剂,特别是炔烃和二烯烃选择加氢催化剂结构与性能的研究进行了评述.     

Migratory Hydrogenation of Terminal Alkynes by Base/Cobalt Relay Catalysis

Migratory functionalization of alkenes has emerged as a powerful strategy to achieve functionalization at a distal position to the original reactive site on a hydrocarbon chain. However, an analogous protocol for alkyne substrates is yet to be developed. Herein, a base and cobalt relay catalytic process for the selective synthesis of (Z)‐2‐alkenes and conjugated E alkenes by migratory hydrogenation of terminal alkynes is disclosed. Mechanistic studies support a relay catalytic process involving a sequential base‐catalyzed isomerization of terminal alkynes and cobalt‐catalyzed hydrogenation of either 2‐alkynes or conjugated diene intermediates. Notably, this practical non‐noble metal catalytic system enables efficient control of the chemo‐, regio‐, and stereoselectivity of this transformation.     

Ethanol as a Hydrogenating Agent: Palladium‐Catalyzed Stereoselective Hydrogenation of Ynamides To Give Enamides

Ethanol is shown to act as a hydrogenating agent for ynamides under palladium catalysis. This behavior is different from the normally expected reaction of ethanol addition to alkynes. The reaction shows stereoselectivity for E enamides, which is in contrast to reports using other hydrogenating sources. The method was also extended to ynamines. Alternatively, the use of ethanol and ammonium formate as the hydrogenating source gives Z enamides. The role of ethanol in hydrogenation was demonstrated by means deuterium labeling experiment.     

Ligand-Free Synthesis of 1,4-Disubstituted-1,3-diynes by Iron/Copper Cocatalyzed Homocoupling of Terminal Alkynes

A simple and efficient protocol for Fe/Cu cocatalyzed oxidative homocoupling reaction of terminal alkynes to symmetrical 1,4‐disubstituted‐1,3‐diynes was presented. The results showed that both CuBr and FeCl₃ played crucial roles in the reaction. It is noteworthy that this protocol employs mild, efficient, aerobic and ligand free conditions. The alkynes, including aromatic, heteroaromatic and aliphatic alkynes, were transformed into the corresponding 1,3‐diynes in good to excellent yields.