Ordered Mesoporous Organosilica with Ionic‐Liquid Framework: An Efficient and Reusable Support for the Palladium‐Catalyzed Suzuki–Miyaura Coupling Reaction in Water

The preparation of a novel palladium‐supported periodic mesoporous organosilica based on alkylimidazolium ionic liquid (Pd@PMO‐IL) in which imidazoilium ionic liquid is uniformly distributed in the silica mesoporous framework is described. Both Pd@PMO‐IL and the parent PMO‐IL were characterized by N₂‐adsorption–desorption, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), TEM, and solid‐state NMR spectroscopy. We have demonstrated that Pd@PMO‐IL is an efficient and reusable catalyst for the Suzuki–Miyaura coupling reaction of various types of iodo‐, bromo‐, and even deactivated aryl chlorides in water. It was also found that although the PMO‐IL nanostructure acts as reservoir for soluble Pd species, it can also operate as a nanoscaffold to recapture the Pd nanoparticles into the mesochannels thus preventing extensive agglomeration of Pd. This observation might be attributed to the isolated ionic liquid units that effectively control the reaction mechanism by preventing Pd agglomeration and releasing and recapturing Pd nanoparticles during the reaction process. The catalyst can be recovered and reused for at least four reaction cycles without significant loss of activity.     

Organorhodium‐Functionalized Periodic Mesoporous Organosilica: High Hydrophobicity Promotes Asymmetric Transfer Hydrogenation in Aqueous Medium

Three organosilica‐bridged periodic mesoporous organosilicas were prepared by the immobilization of a chiral N‐sulfonylated diamine‐based organorhodium complex within their silicate network. Structural analysis and characterization confirmed their well‐defined single‐site active rhodium centers, whilst electron microscopy revealed their highly ordered hexagonal mesostructures. Among these three different organosilica‐bridged periodic mesoporous organosilicas, the ethylene‐bridged periodic mesoporous organosilica catalyst exhibited excellent heterogeneous catalytic activity and high enantioselectivity in the aqueous asymmetric transfer hydrogenation of aromatic ketones. This superior catalytic performance was attributed to its salient hydrophobicity, whilst its comparable enantioselectivity relative to the homogeneous catalyst was derived from the confined nature of the chiral organorhodium catalytic sites. Furthermore, this ethylene‐bridged periodic mesoporous organosilica could be conveniently recovered and reused at least 12 times without the loss of its catalytic activity. This feature makes this catalyst attractive for practical organic synthesis in an environmentally friendly manner. This study offers a general way of optimizing the bridged organosilica moiety in periodic mesoporous organosilicas, thereby enhancing its catalytic activity in heterogeneous catalysis.     

Functionalized Periodic Mesoporous Organosilica: A Highly Enantioselective Catalyst for the Michael Addition of 1,3‐Dicarbonyl Compounds to Nitroalkenes

A functionalized periodic mesoporous organosilica with incorporated chiral bis(cyclohexyldiamine)‐based Ni^II complexes within the silica framework was developed by the co‐condensation of (1R,2R)‐cyclohexyldiamine‐derived silane and ethylene‐bridge silane, followed by the complexation of NiBr₂ in the presence of (1R,2R)‐N,N′‐dibenzylcyclohexyldiamine. Structural characterization by XRD, nitrogen sorption, and TEM disclosed its orderly mesostructure, and FTIR and solid‐state NMR spectroscopy demonstrated the incorporation of well‐defined single‐site bis(cyclohexyldiamine)‐based Ni^II active centers within periodic mesoporous organosilica. As a chiral heterogeneous catalyst, this functionalized periodic mesoporous organosilica showed high catalytic activity and excellent enantioselectivity in the asymmetric Michael addition of 1,3‐dicarbonyl compounds to nitroalkenes, comparable to those with homogeneous catalysts. In particular, this heterogeneous catalyst could be recovered easily and reused repeatedly up to nine times without obviously affecting its enantioselectivity, thus showing good potential for industrial applications.     

Ionic Liquids as Precursors for Efficient Mesoporous Iron‐Nitrogen‐Doped Oxygen Reduction Electrocatalysts

A ferrocene‐based ionic liquid (Fe‐IL) is used as a metal‐containing feedstock with a nitrogen‐enriched ionic liquid (N‐IL) as a compatible nitrogen content modulator to prepare a novel type of non‐precious‐metal–nitrogen–carbon (M‐N‐C) catalysts, which feature ordered mesoporous structure consisting of uniform iron oxide nanoparticles embedded into N‐enriched carbons. The catalyst Fe¹⁰@NOMC exhibits comparable catalytic activity but superior long‐term stability to 20 wt % Pt/C for ORR with four‐electron transfer pathway under alkaline conditions. Such outstanding catalytic performance is ascribed to the populated Fe (Fe₃O₄) and N (N2) active sites with synergetic chemical coupling as well as the ordered mesoporous structure and high surface area endowed by both the versatile precursors and the synthetic strategy, which also open new avenues for the development of M‐N‐C catalytic materials.     

Ionic‐Liquid‐Mediated Active‐Site Control of MoS2 for the Electrocatalytic Hydrogen Evolution Reaction

The layered crystal MoS₂ has been proposed as an alternative to noble metals as the electrocatalyst for the hydrogen evolution reaction (HER). However, the activity of this catalyst is limited by the number of available edge sites. It was previously shown that, by using an imidazolium ionic liquid as synthesis medium, nanometre‐size crystal layers of MoS₂ can be prepared which exhibit a very high number of active edge sites as well as a de‐layered morphology, both of which contribute to HER electrocatalytic activity. Herein, it is examined how to control these features synthetically by using a range of ionic liquids as synthesis media. Non‐coordinating ILs with a planar heterocyclic cation produced MoS₂ with the de‐layered morphology, which was subsequently shown to be highly advantageous for HER electrocatalytic activity. The results furthermore suggest that the crystallinity, and in turn the catalytic activity, of the MoS₂ layers can be improved by employing an IL with specific solvation properties. These results provide the basis for a synthetic strategy for increasing the HER electrocatalytic activity of MoS₂ by tuning its crystal properties, and thus improving its potential for use in hydrogen production technologies.     

Ionic‐Liquid‐Grafted Rigid Poly(p‐Phenylene) Microspheres: Efficient Heterogeneous Media for Metal Scavenging and Catalysis

Novel guanidinium ionic liquid‐grafted rigid poly(p‐phenylene) (PPPIL) microspheres have been developed for metal scavenging and catalysis. The noble‐metal nanoparticles supported on the microspheres surface can be used as efficient heterogeneous catalysts. The combination of nanoparticles and ionic liquid fragments on the microsphere surfaces enhance the activity and durability of the catalyst. The PPPIL ? Pd⁰ catalyst has been tested in the Suzuki cross‐coupling reaction, and exhibits much higher catalytic activity than Pd catalysts supported on porous polymer matrices. The PPPIL ? Pd⁰ catalyst can be recycled at least for nine runs without any significant loss of activity. The present approach may, therefore, have potential applications in transition‐metal‐nanocatalyzed reactions.     

Synthesis and Characterization of Alkyl‐Imidazolium‐Based Periodic Mesoporous Organosilicas: A Versatile Host for the Immobilization of Perruthenate (RuO4−) in the Aerobic Oxidation of Alcohols

The preparation and characterization of a set of periodic mesoporous organosilicas (PMOs) that contain different fractions of 1,3‐bis(3‐trimethoxysilylpropyl)imidazolium chloride (BTMSPI) groups uniformly distributed in the silica mesoporous framework is described. The mesoporous structure of the materials was characterized by powder X‐ray diffraction, transmission electron microscopy, and N₂ adsorption–desorption analysis. The presence of propyl imidazolium groups in the silica framework of the materials was also characterized by solid‐state NMR spectroscopy and diffuse‐reflectance Fourier‐transform infrared spectroscopy. The effect of the BTMSPI concentration in the initial solutions on the structural properties (including morphology) of the final materials was also examined. The total organic content of the PMOs was measured by elemental analysis, whereas their thermal stability was determined by thermogravimetric analysis. Among the described materials, it was found that PMO with 10 % imidazolium content is an effective host for the immobilization of perruthenate through an ion‐exchange protocol. The resulting Ru@PI‐10 was then employed as a recyclable catalyst in the highly efficient aerobic oxidation of various types of alcohols.     

Assembly of Mesoporous Metal–Organic Framework Templated by an Ionic Liquid/Ethylene Glycol Interface

We propose a facile room‐temperature synthesis of a metal–organic framework (MOF) with a bimodal mesoporous structure (3.9 and 17‐28 nm) in an ionic liquid (IL)/ethylene glycol (EG) mixture. The X‐ray diffraction analysis reveals that MOF formation can be efficiently promoted by the presence of the EG/IL interface at room temperature. The MOFs with mesoporous networks are characterized by SEM and TEM. The formation mechanism of the mesoporous MOF in EG/IL mixture is investigated. It is proposed that the EG nanodroplets in the IL work as templates for the formation of the large mesopores. The as‐synthesized mesoporous metal–organic framework is an effective and reusable heterogeneous catalyst to catalyze the aerobic oxidation of benzylic alcohols.     

磺化碳催化Biginelli反应一锅法合成3,4-二氢-2(1H)-酮和硫酮(英文)

A sulfonated carbon material was shown to be a highly efficient,eco-friendly,and recyclable solid acid catalyst for the Biginelli reaction of β-ketoester,aldehyde,and urea or thiourea under solvent-free conditions.It gave 3,4-dihydropyrimidin-2(1H)-ones and-thiones in good to excellent yields.This method has the advantages of a simple procedure with easy work-up,short reaction time,and high yields.The catalyst can be recycled after a simple work-up and was reused four times without substantial reduction in activity.     

Microwave Irradiation for the Facile Synthesis of Transition‐Metal Nanoparticles (NPs) in Ionic Liquids (ILs) from Metal–Carbonyl Precursors and Ru‐, Rh‐, and Ir‐NP/IL Dispersions as Biphasic Liquid–Liquid Hydrogenation Nanocatalysts for Cyclohexene

Stable chromium, molybdenum, tungsten, manganese, rhenium, ruthenium, osmium, cobalt, rhodium, and iridium metal nanoparticles (M‐NPs) have been reproducibly obtained by facile, rapid (3 min), and energy‐saving 10 W microwave irradiation (MWI) under an argon atmosphere from their metal–carbonyl precursors [M_x(CO)_y] in the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium tetrafluoroborate ([BMIm][BF₄]). This MWI synthesis is compared to UV‐photolytic (1000 W, 15 min) or conventional thermal decomposition (180–250 °C, 6–12 h) of [M_x(CO)_y] in ILs. The MWI‐obtained nanoparticles have a very small (<5 nm) and uniform size and are prepared without any additional stabilizers or capping molecules as long‐term stable M‐NP/IL dispersions (characterization by transmission electron microscopy (TEM), transmission electron diffraction (TED), and dynamic light scattering (DLS)). The ruthenium, rhodium, or iridium nanoparticle/IL dispersions are highly active and easily recyclable catalysts for the biphasic liquid–liquid hydrogenation of cyclohexene to cyclohexane with activities of up to 522 (mol product) (mol Ru)^?1 h^?1 and 884 (mol product) (mol Rh)^?1 h^?1 and give almost quantitative conversion within 2 h at 10 bar H₂ and 90 °C. Catalyst poisoning experiments with CS₂ (0.05 equiv per Ru) suggest a heterogeneous surface catalysis of Ru‐NPs.     

Mesoporous Core–Shell Fenton Nanocatalyst: A Mild,Operationally Simple Approach to the Synthesis of Adipic Acid

Mesoporous nanoparticles composed of γ‐Al₂O₃ cores and α‐Fe₂O₃ shells were synthesized in aqueous medium. The surface charge of γ‐Al₂O₃ helps to form the core–shell nanocrystals. The core–shell structure and formation mechanism have been investigated by wide‐angle XRD, energy‐dispersive X‐ray spectroscopy, and elemental mapping by ultrahigh‐resolution (UHR) TEM and X‐ray photoelectron spectroscopy. The N₂ adsorption–desorption isotherm of this core–shell materials, which is of type IV, is characteristic of a mesoporous material having a BET surface area of 385 m² g^?1 and an average pore size of about 3.2 nm. The SEM images revealed that the mesoporosity in this core–shell material is due to self‐aggregation of tiny spherical nanocrystals with sizes of about 15–20 nm. Diffuse‐reflectance UV/Vis spectra, elemental mapping by UHRTEM, and wide‐angle XRD patterns indicate that the materials are composed of aluminum oxide cores and iron oxide shells. These Al₂O₃@Fe₂O₃ core–shell nanoparticles act as a heterogeneous Fenton nanocatalyst in the presence of hydrogen peroxide, and show high catalytic efficiency for the one‐pot conversion of cyclohexanone to adipic acid in water. The heterogeneous nature of the catalyst was confirmed by a hot filtration test and analysis of the reaction mixture by atomic absorption spectroscopy. The kinetics of the reaction was monitored by gas chromatography and ¹H NMR spectroscopy. The new core–shell catalyst remained in a separate solid phase, which could easily be removed from the reaction mixture by simple filtration and the catalyst reused efficiently.     

Ionic‐Liquid‐Supported (ILS) Catalysts for Asymmetric Organic Synthesis

The asymmetric synthesis of compounds that contain new C? C and C? O bonds remains one of the most important types of synthesis in organic chemistry. Over the years, many different types of catalysts have been designed and used effectively to carry out such transformations. Ionic‐liquid‐supported (ILS) catalysts represent a new and very effective class of catalysts that are used to facilitate the asymmetric synthesis of such compounds. There are many advantages to using ILS catalysts; they are nontoxic, environmentally benign, and, most important, recyclable. An overview of the design, synthesis, mode of action, and effectiveness of this class of catalysts is reported.     

Manganese‐Doped Highly Ordered Mesoporous Silicate with High Efficiency for Oxidation Suppression

Herein, we demonstrate a facile approach to manganese‐doped highly ordered mesoporous silicate with oxidation‐suppression function. As biocompatible supports of guest ions, the ordered mesoporous silicate was synthesized by evaporation‐induced self‐assembly. The phase‐transition from disordered to lamellar structures in the highly ordered mesoporous structure of these porosity‐tuned materials was controlled by adjusting the concentration of a lab‐made polystyrene‐b‐polyethylene oxide copolymer. Manganese was successfully incorporated as a guest in the hexagonally packed mesoporous silicate by using an ultrasound‐assisted technique. The incorporation of manganese ions into the pores of a mesoporous silicate support could be induced for host–guest functional applications. Manganese‐doped mesoporous silicate structures have been examined for their use as antioxidizing agents by electron spin resonance (ESR) measurements and radical‐scavenging tests. The manganese atoms in the mesoporous structures could act in a free‐radical‐scavenging capacity, much like manganese nanoparticles. The high efficiency of their oxidation‐suppression function is extended for application to catalytic products.     

Synthesis of Superacid‐Functionalized Mesoporous Nanocages with Tunable Pore Diameters and Their Application in the Synthesis of Coumarins

Here we demonstrate for the first time the preparation of a triflic acid (TFA)‐functionalized mesoporous nanocage with tunable pore diameters by the wet impregnation method. The obtained materials have been unambiguously characterized by XRD, N₂ adsorption, FTIR spectroscopy, and NH₃ temperature‐programmed desorption (TPD). From the characterization results, it has been found that the TFA molecules are firmly anchored on the surface of the mesoporous supports without affecting their acidity. We also demonstrate the effect of the pore and cage diameter of the KIT‐5 supports on the loading of TFA molecules inside the pore channels. It has been found that the total acidity of the materials increases with an increase in the TFA loading on the support, whereas the acidity of the materials decreases with an increase in the pore diameter of the support. The acidity of the TFA‐functionalized mesoporous nanocages is much higher than that of the zeolites and metal‐substituted mesoporous acidic catalysts. The TFA‐functionalized materials have also been employed as the catalysts for the synthesis of 7‐hydroxy‐4‐methylcoumarin by means of the Pechmann reaction under solvent‐free conditions. It has been found that the catalytic activity of the TFA‐functionalized KIT‐5 is much higher than that of zeolites and metal‐substituted mesoporous catalytic materials in the synthesis of coumarin derivatives. The stability of the catalyst is extremely good and can be reused several times without much loss of activity in the above reaction.