Methyl‐Selective α‐Oxygenation of Tertiary Amines to Formamides by Employing Copper/Moderately Hindered Nitroxyl Radical (DMN‐AZADO or 1‐Me‐AZADO)

Methyl‐selective α‐oxygenation of tertiary amines is a highly attractive approach for synthesizing formamides while preserving the amine substrate skeletons. Therefore, the development of efficient catalysts that can advance regioselective α‐oxygenation at the N‐methyl positions using molecular oxygen (O₂) as the terminal oxidant is an important subject. In this study, we successfully developed a highly regioselective and efficient aerobic methyl‐selective α‐oxygenation of tertiary amines by employing a Cu/nitroxyl radical catalyst system. The use of moderately hindered nitroxyl radicals, such as 1,5‐dimethyl‐9‐azanoradamantane N‐oxyl (DMN‐AZADO) and 1‐methyl‐2‐azaadamanane N‐oxyl (1‐Me‐AZADO), was very important to promote the oxygenation effectively mainly because these N‐oxyls have longer life‐times than less hindered N‐oxyls. Various types of tertiary N‐methylamines were selectively converted to the corresponding formamides. A plausible reaction mechanism is also discussed on the basis of experimental evidence, together with DFT calculations. The high regioselectivity of this catalyst system stems from steric restriction of the amine‐N‐oxyl interactions.     

Long‐Lived Excited States of Zwitterionic Copper(I) Complexes for Photoinduced Cross‐Dehydrogenative Coupling Reactions

Four heteroleptic copper(I) complexes containing phenanthroline and monoanionic nido‐carborane‐diphosphine ligands have been prepared and structurally characterized by various spectroscopic techniques and X‐ray diffraction. These complexes exhibit intense absorptions in the visible range and excited‐state lifetimes on the microsecond scale. Their application in visible‐light‐induced cross‐dehydrogenative coupling reactions was investigated. Preliminary studies showed that one of the four copper(I) complexes is an efficient catalyst for photoinduced oxidative C?H functionalization using oxygen as oxidant. Furthermore, α‐functionalized tertiary amines were obtained in good‐to‐excellent yields by light irradiation (λ>420 nm) of a mixture of our Cu^I complex, tertiary amines, and a variety of nucleophiles (nitroalkane, acetone, or indoles) under aerobic conditions. Electron paramagnetic resonance measurements provided evidence for the formation of superoxide radical anions (O₂^??) rather than singlet oxygen (¹O₂) during these photocatalytic reactions.     

Regio‐ and Enantioselective Synthesis of Trifluoromethyl‐Substituted Homoallylic α‐Tertiary NH2‐Amines by Reactions Facilitated by a Threonine‐Based Boron‐Containing Catalyst

A method for catalytic regio‐ and enantioselective synthesis of trifluoromethyl‐substituted and aryl‐, heteroaryl‐, alkenyl‐, and alkynyl‐substituted homoallylic α‐tertiary NH₂‐amines is introduced. Easy‐to‐synthesize and robust N‐silyl ketimines are converted to NH‐ketimines in situ, which then react with a Z‐allyl boronate. Transformations are promoted by a readily accessible l ‐threonine‐derived aminophenol‐based boryl catalyst, affording the desired products in up to 91 % yield, >98:2 α:γ selectivity, >98:2 Z:E selectivity, and >99:1 enantiomeric ratio. A commercially available aminophenol may be used, and allyl boronates, which may contain an alkyl‐, a chloro‐, or a bromo‐substituted Z‐alkene, can either be purchased or prepared by catalytic stereoretentive cross‐metathesis. What is more, Z‐trisubstituted allyl boronates may be used. Various chemo‐, regio‐, and diastereoselective transformations of the α‐tertiary homoallylic NH₂‐amine products highlight the utility of the approach; this includes diastereo‐ and regioselective epoxide formation/trichloroacetic acid cleavage to generate differentiated diol derivatives.     

PhI(OAc)2‐Mediated Radical Trifluoromethylation of Vinyl Azides with Me3SiCF3

The fluorine‐containing organic motif is becoming privileged in pharmaceuticals, agrochemicals, and functional materials, owing to its unique properties such as electron‐withdrawing character, metabolic stability, and lipophilicity. Described herein is the PhI(OAc)₂‐mediated radical trifluoromethylation of vinyl azides with Me₃SiCF₃ to efficiently generate α‐trifluoromethyl azines. The resulting α‐trifluoromethyl azines were successfully transformed to valuable fluorine‐containing molecules such as α‐trifluoromethyl ketones, β‐trifluoromethyl amines, 5‐fluoropyrazoles, and trifluoroethyl isoquinolines.     

CuBr2/N,N,N′,N′‐Tetra[(2‐pyridal)methyl]ethylenediamine/Tertiary Amine as a Highly Active and Versatile Catalyst for Atom‐Transfer Radical Polymerization via Activator Generated by Electron Transfer

Summary: A highly active and versatile CuBr₂/N,N,N′,N′‐tetra[(2‐pyridal)methyl]ethylenediamine (CuBr₂/TPEN)‐tertiary amine catalyst system has been developed for atom transfer radical polymerization via activator‐generated‐by‐electron‐transfer (AGET ATRP). The catalyst mediates good control of the AGET ATRPs of methyl acrylate, methyl methacrylate, and styrene at 1 mol‐% catalyst relative to initiator. A mechanism study shows that tertiary amines such as triethylamine reduces the CuBr₂/TPEN complex to CuBr/TPEN.

The GPC traces of PSt, PMA, and PMMA prepared by AGET ATRP at 1 mol‐% of catalyst relative to initiator are monomodal and have low polydispersities.     

A Convenient Method for the Preparation of 1,5‐Diaryl‐3‐(arylamino)‐1H‐pyrrol‐2(5H)‐ones

A simple and eco‐friendly method for the preparation of 1,5‐diaryl‐3‐(arylamino)‐1H‐pyrrol‐2(5H)‐ones via the cyclo‐condensation reaction of aldehydes, amines and ethyl pyruvate in the presence of silica supported ferric chloride (SiO₂‐FeCl₃) as reusable heterogeneous catalyst is described. The present methodology offers several advantages such as excellent yields, simple procedure and short reaction times.     

Bifunctional Heterogeneous Catalysis of Silica–Alumina‐Supported Tertiary Amines with Controlled Acid–Base Interactions for Efficient 1,4‐Addition Reactions

We report the first tunable bifunctional surface of silica–alumina‐supported tertiary amines (SA–NEt₂) active for catalytic 1,4‐addition reactions of nitroalkanes and thiols to electron‐deficient alkenes. The 1,4‐addition reaction of nitroalkanes to electron‐deficient alkenes is one of the most useful carbon–carbon bond‐forming reactions and applicable toward a wide range of organic syntheses. The reaction between nitroethane and methyl vinyl ketone scarcely proceeded with either SA or homogeneous amines, and a mixture of SA and amines showed very low catalytic activity. In addition, undesirable side reactions occurred in the case of a strong base like sodium ethoxide employed as a catalytic reagent. Only the present SA‐supported amine (SA–NEt₂) catalyst enabled selective formation of a double‐alkylated product without promotions of side reactions such as an intramolecular cyclization reaction. The heterogeneous SA–NEt₂ catalyst was easily recovered from the reaction mixture by simple filtration and reusable with retention of its catalytic activity and selectivity. Furthermore, the SA–NEt₂ catalyst system was applicable to the addition reaction of other nitroalkanes and thiols to various electron‐deficient alkenes. The solid‐state magic‐angle spinning (MAS) NMR spectroscopic analyses, including variable‐contact‐time ¹³C cross‐polarization (CP)/MAS NMR spectroscopy, revealed that acid–base interactions between surface acid sites and immobilized amines can be controlled by pretreatment of SA at different temperatures. The catalytic activities for these addition reactions were strongly affected by the surface acid–base interactions.     

Phosphine‐ and Hydrogen‐Free: Highly Regioselective Ruthenium‐Catalyzed Hydroaminomethylation of Olefins

A highly regioselective ruthenium‐catalyzed hydroaminomethylation of olefins is reported. Using easily available trirutheniumdodecacarbonyl an efficient sequence consisting of a water‐gas shift reaction, hydroformylation of olefins, with subsequent imine or enamine formation and final reduction is realized. This novel procedure is highly practical (ligand‐free, one pot) and economic (low catalyst loading and inexpensive metal). Bulk industrial as well as functionalized olefins react with various amines to give the corresponding tertiary amines generally in high yields (up to 92 %), excellent regioselectivities (n/iso>99:1), and full chemoselectivity in favor of terminal olefins.     

Eco‐friendly and Efficient Synthesis of 2,3‐Dihydroquinazolin‐4(1H)‐ones

A simple and facile method for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones through the direct cyclocondensation of one‐pot three‐component cyclocondensation of isatoic anhydride, ammonium acetate (or primary amines) and aldehydes; and anthranilamide and aldehydes using silica supported ferric chloride (SiO₂‐FeCl₃) as catalyst under solvent‐free conditions is described.     

Development of a General Non‐Noble Metal Catalyst for the Benign Amination of Alcohols with Amines and Ammonia

The N‐alkylation of amines or ammonia with alcohols is a valuable route for the synthesis of N‐alkyl amines. However, as a potentially clean and economic choice for N‐alkyl amine synthesis, non‐noble metal catalysts with high activity and good selectivity are rarely reported. Normally, they are severely limited due to low activity and poor generality. Herein, a simple NiCuFeO_x catalyst was designed and prepared for the N‐alkylation of ammonia or amines with alcohol or primary amines. N‐alkyl amines with various structures were successfully synthesized in moderate to excellent yields in the absence of organic ligands and bases. Typically, primary amines could be efficiently transformed into secondary amines and N‐heterocyclic compounds, and secondary amines could be N‐alkylated to synthesize tertiary amines. Note that primary and secondary amines could be produced through a one‐pot reaction of ammonia and alcohols. In addition to excellent catalytic performance, the catalyst itself possesses outstanding superiority, that is, it is air and moisture stable. Moreover, the magnetic property of this catalyst makes it easily separable from the reaction mixture and it could be recovered and reused for several runs without obvious deactivation.     

Tertiary Carbinamine Synthesis by Rhodium‐Catalyzed [3+2] Annulation of N‐Unsubstituted Aromatic Ketimines and Alkynes

A convenient and waste‐free synthesis of indene‐based tertiary carbinamines by rhodium‐catalyzed imine/alkyne [3+2] annulation is described. Under the optimized conditions of 0.5–2.5 mol % [{(cod)Rh(OH)}₂] (cod=1,5‐cyclooctadiene) catalyst, 1,3‐bis(diphenylphosphanyl)propane (DPPP) ligand, in toluene at 120 °C, N‐unsubstituted aromatic ketimines and internal alkynes were coupled in a 1:1 ratio to form tertiary 1H‐inden‐1‐amines in good yields and with high selectivities over isoquinoline products. A plausible catalytic cycle involves sequential imine‐directed aromatic C? H bond activation, alkyne insertion, and a rare example of intramolecular ketimine insertion into a Rh^I–alkenyl linkage.     

Cobalt‐Catalyzed Electrophilic Amination of Aryl‐ and Heteroarylzinc Pivalates with N‐Hydroxylamine Benzoates

Aryl‐ and heteroarylzinc pivalates can be aminated with O‐benzoylhydroxylamines at 25 °C within 2–4 h in the presence of 2.5–5.0 % CoCl₂?2 LiCl to furnish the corresponding tertiary arylated or heteroarylated amines in good yields. This electrophilic amination also provides access to diarylamines and aryl(heteroaryl)amines. A new tuberculosis drug candidate (Q203) was prepared in six steps and 56 % overall yield by using this cobalt‐catalyzed amination as the key step.     

新型联吡啶配体P-Phos在钯催化胺偶联反应中的应用

P-Phos [2,2′6,6′-四甲氧基吡啶-4,4′-二(二苯基膦)-3,3′-联吡啶]是一类对空气稳定的杂环磷配体。本文以较简单的方法合成了rac-P-Phos配体,并用IR、1H NMR、13C NMR和元素分析等方法进行了表征。首次将P-Phos配体用于催化卤代芳烃和胺的偶联反应中。通过对碱、溶剂和催化剂用量等的筛选,确立了最优化的反应条件。配体对溴代芳烃的催化效果很好,对具有吸电子存在的氯代芳烃,特别是氯代吡啶同样得到了令人满意的结果,分离产率高达97％。催化剂对水和空气的稳定性很好,对胺偶联反应的催化效果很理想,因此是一种有应用前景的催化剂。     

Ruthenium‐Immobilized Periodic Mesoporous Organosilica: Synthesis,Characterization, and Catalytic Application for Selective Oxidation of Alkanes

Periodic mesoporous organosilica (PMO) is a unique material that has a crystal‐like wall structure with coordination sites for metal complexes. A Ru complex, [RuCl₂(CO)₃]₂, is successfully immobilized onto 2,2’‐bipyridine (BPy) units of PMO to form a single‐site catalyst, which has been confirmed by various physicochemical analyses. Using NaClO as an oxidant, the Ru‐immobilized PMO oxidizes the tertiary C?H bonds of adamantane to the corresponding alcohols at 57 times faster than the secondary C?H bonds, thereby exhibiting remarkably high regioselectivity. Moreover, the catalyst converts cis‐decalin to cis‐9‐decalol in a 63 % yield with complete retention of the substrate stereochemistry. The Ru catalyst can be separated by simple filtration and reused without loss of the original activity and selectivity for the oxidation reactions.     

The “Borrowing Hydrogen Strategy” by Supported Ruthenium Hydroxide Catalysts: Synthetic Scope of Symmetrically and Unsymmetrically Substituted Amines

The N‐alkylation of ammonia (or its surrogates, such as urea, NH₄HCO₃, and (NH₄)₂CO₃) and amines with alcohols, including primary and secondary alcohols, was efficiently promoted under anaerobic conditions by the easily prepared and inexpensive supported ruthenium hydroxide catalyst Ru(OH)_x/TiO₂. Various types of symmetrically and unsymmetrically substituted “tertiary” amines could be synthesized by the N‐alkylation of ammonia (or its surrogates) and amines with “primary” alcohols. On the other hand, the N‐alkylation of ammonia surrogates (i.e., urea and NH₄HCO₃) with “secondary” alcohols selectively produced the corresponding symmetrically substituted “secondary” amines, even in the presence of excess amounts of alcohols, which is likely due to the steric hindrance of the secondary alcohols and/or secondary amines produced. Under aerobic conditions, nitriles could be synthesized directly from alcohols and ammonia surrogates. The observed catalysis for the present N‐alkylation reactions was intrinsically heterogeneous, and the retrieved catalyst could be reused without any significant loss of catalytic performance. The present catalytic transformation would proceed through consecutive N‐alkylation reactions, in which alcohols act as alkylating reagents. On the basis of deuterium‐labeling experiments, the formation of the ruthenium dihydride species is suggested during the N‐alkylation reactions.     

Supported Gold Nanoparticles for Efficient α‐Oxygenation of Secondary and Tertiary Amines into Amides

Although the α‐oxygenation of amines is a highly attractive method for the synthesis of amides, efficient catalysts suited to a wide range of secondary and tertiary alkyl amines using O₂ as the terminal oxidant have no precedent. This report describes a novel, green α‐oxygenation of a wide range of linear and cyclic secondary and tertiary amines mediated by gold nanoparticles supported on alumina (Au/Al₂O₃). The observed catalysis was truly heterogeneous, and the catalyst could be reused. The present α‐oxygenation utilizes O₂ as the terminal oxidant and water as the oxygen atom source of amides. The method generates water as the only theoretical by‐product, which highlights the environmentally benign nature of the present reaction. Additionally, the present α‐oxygenation provides a convenient method for the synthesis of ¹⁸O‐labeled amides using H₂¹⁸O as the oxygen source.     

Synthesis of New Pyrano[2′,3′: 5,6]chromeno[4,3‐b]quinolin‐4‐ones via Aza‐DielsAlder Reaction

New pyrano[2′,3′: 5,6]chromeno[4,3‐b]quinolin‐4‐ones have been synthesized by intramolecular aza‐Diels? Alder reaction of the azadienes generated in situ from aryl amines and 8‐formyl‐7‐(prop‐2‐ynyl)2,3‐disubstituted chromones using CuFe₂O₄ nanoparticles as a catalyst in DMSO at 80–90° in good‐to‐excellent yields. Particularly valuable features of this methodology include simple implementation, inexpensive and reusable catalyst, and good yields. The structures were established by spectroscopic data and further confirmed by X‐ray diffraction analysis of one of the products.     

Visible‐Light‐Induced Photoredox Catalysis with a Tetracerium‐Containing Silicotungstate

The development of visible‐light‐induced photocatalysts for chemoselective functional group transformations has received considerable attention. Polyoxometalates (POMs) are potential materials for efficient photocatalysts because their properties can be precisely tuned by changing their constituent elements and structures and by the introduction of additional metal cations. Furthermore, they are thermally and oxidatively more stable than the frequently utilized organometallic complexes. The visible‐light‐responsive tetranuclear cerium(III)‐containing silicotungstate TBA₆[{Ce(H₂O)}₂{Ce(CH₃CN)}₂(μ₄‐O)(γ‐SiW₁₀O₃₆)₂] (CePOM; TBA=tetra‐n‐butylammonium) has now been synthesized; when CePOM was irradiated with visible light (λ>400 nm), a unique intramolecular Ce^III‐to‐POM(W^VI) charge transfer was observed. With CePOM, the photocatalytic oxidative dehydrogenation of primary and secondary amines as well as the α‐cyanation of tertiary amines smoothly proceeded in the presence of O₂ (1 atm) as the sole oxidant.     

Facile One‐pot Synthesis of Substituted Dihydropyrrol‐2‐ones via Four‐component Domino Reaction of Amines,Dialkyl Acetylenedicarboxylates and Formaldehyde

A mild and efficient method for the one‐pot synthesis of substituted dihydropyrrol‐2‐one derivatives is described via four‐component domino reaction of amines, dialkyl acetylenedicarboxyaltes and formaldehyde in the presence of 1‐methyl‐2‐oxopyrrolidinium hydrogen sulfate ([Hpyro][HSO₄]) as ionic liquid catalyst. This facile approach proceeded smoothly in good to high yields and pure products are separated from the reaction mixture by simple filtration.     

Asymmetric Radical–Radical Cross‐Coupling through Visible‐Light‐Activated Iridium Catalysis

Combining single electron transfer between a donor substrate and a catalyst‐activated acceptor substrate with a stereocontrolled radical–radical recombination enables the visible‐light‐driven catalytic enantio‐ and diastereoselective synthesis of 1,2‐amino alcohols from trifluoromethyl ketones and tertiary amines. With a chiral iridium complex acting as both a Lewis acid and a photoredox catalyst, enantioselectivities of up to 99 % ee were achieved. A quantum yield of <1 supports the proposed catalytic cycle in which at least one photon is needed for each asymmetric C? C bond formation mediated by single electron transfer.