Synthesis of 3,8‐Dichloro‐6‐ethyl‐1,2,5,7‐tetramethyl–BODIPY from an Asymmetric Dipyrroketone and Reactivity Studies at the 3,5,8‐Positions

The asymmetric BODIPY 1 a (BODIPY=4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene), containing two chloro substituents at the 3,8‐positions and a reactive 5‐methyl group, was synthesized from the asymmetric dipyrroketone 3 , which was readily obtained from available pyrrole 2 a . The reactivity of 3,8‐dichloro‐6‐ethyl‐1,2,5,7‐tetramethyl‐BODIPY 1 a was investigated by using four types of reactions. This versatile BODIPY undergoes regioselective Pd⁰‐catalyzed Stille coupling reactions and/or regioselective nucleophilic addition/elimination reactions, first at the 8‐chloro and then at the 3‐chloro group, using a variety of organostannanes and N‐, O‐, and S‐centered nucleophiles. On the other hand, the more reactive 5‐methyl group undergoes regioselective Knoevenagel condensation with an aryl aldehyde to produce a monostyryl‐BODIPY, and oxidation with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ) gives the corresponding 5‐formyl‐BODIPY. Investigation of the reactivity of asymmetric BODIPY 1 a led to the preparation of a variety of functionalized BODIPYs with λ_max of absorption and emission in the ranges 487–587 and 521–617 nm, respectively. The longest absorbing/emitting compound was the monostyryl‐BODIPY 16 , and the largest Stokes shift (49 nm) and fluorescence quantum yield (0.94) were measured for 5‐thienyl‐8‐phenoxy‐BODIPY 15 . The structural properties (including 16 X‐ray structures) of the new series of BODIPYs were investigated.     

meso‐Ester and Carboxylic Acid Substituted BODIPYs with Far‐Red and Near‐Infrared Emission for Bioimaging Applications

A series of meso‐ester‐substituted BODIPY derivatives 1–6 are synthesized and characterized. In particular, dyes functionalized with oligo(ethylene glycol) ether styryl or naphthalene vinylene groups at the α positions of the BODIPY core ( 3 – 6 ) become partially soluble in water, and their absorptions and emissions are located in the far‐red or near‐infrared region. Three synthetic approaches are attempted to access the meso‐carboxylic acid (COOH)‐substituted BODIPYs 7 and 8 from the meso‐ester‐substituted BODIPYs. Two feasible synthetic routes are developed successfully, including one short route with only three steps. The meso‐COOH‐substituted BODIPY 7 is completely soluble in pure water, and its fluorescence maximum reaches around 650 nm with a fluorescence quantum yield of up to 15 %. Time‐dependent density functional theory calculations are conducted to understand the structure–optical properties relationship, and it is revealed that the Stokes shift is dependent mainly on the geometric change from the ground state to the first excited singlet state. Furthermore, cell staining tests demonstrate that the meso‐ester‐substituted BODIPYs ( 1 and 3 – 6 ) and one of the meso‐COOH‐substituted BODIPYs ( 8 ) are very membrane‐permeable. These features make these meso‐ester‐ and meso‐COOH‐substituted BODIPY dyes attractive for bioimaging and biolabeling applications in living cells.     

Highly Fluorescent and Water‐Soluble Diketopyrrolopyrrole Dyes for Bioconjugation

The preparation of highly water‐soluble and strongly fluorescent diketopyrrolopyrrole (DPP) dyes using an unusual taurine‐like sulfonated linker has been achieved. Exchanging a phenyl for a thienyl substituent shifts the emission wavelength to near λ=600 nm. The free carboxylic acid group present in these new derivatives was readily activated and the dyes were subsequently covalently linked to a model protein (bovine serum albumin; BSA). The bioconjugates were characterized by electronic absorption, fluorescence spectroscopy and MALDI‐TOF mass spectrometry, thus enabling precise determination of the labeling density (ratio DPP/BSA about 3 to 8). Outstanding values of fluorescence quantum yield (30 % to 59 %) for these bioconjugates are obtained. The photostability of these DPP dyes is considerably greater than that of fluorescein under the same irradiation conditions. Remarkably low detection limits between 80 and 300 molecules/μm² were found for the BSA bioconjugates by fluorescence imaging with a epifluorescence microscope.     

Synthesis,Structure, and Optical Studies of Donor–Acceptor‐Type Near‐Infrared (NIR) Aza–Boron‐Dipyrromethene (BODIPY) Dyes

Six donor–acceptor‐type near‐infrared (NIR) aza–boron‐dipyrromethene (BODIPY) dyes and their corresponding aza–dipyrrins were designed and synthesized. The donor moieties at the 1,7‐positions of the aza–BODIPY core were varied from naphthyl to N‐phenylcarbazole to N‐butylcarbazole. The 3,5‐positions were also substituted with phenyl or thienyl groups in the aza–BODIPYs. Photophysical, electrochemical, and computational studies were carried out. The absorption and emission spectra of aza–BODIPYs were significantly redshifted (≈100 nm) relative to the parent tetraphenylaza–BODIPY. Fluorescence studies suggested effective energy transfer (up to 93 %) from donor groups to the aza–BODIPY core in all of the compounds under study. Time‐dependent (TD)‐DFT studies indicated effective electronic interactions between energy donor groups and aza–dipyrrin unit in all the aza–BODIPYs studied. The HOMO–LUMO gap (ΔE) calculated from cyclic voltammetry data was found to be lower for six aza–BODIPYs relative to their corresponding aza–dipyrrins.     

Silyl‐ and Disilanyl‐BODIPYs: Synthesis via Catalytic Dehalosilylation and Spectroscopic Properties

We describe herein the first synthesis of silyl‐ and disilanyl‐BODIPYs through transition‐metal‐catalyzed dehalosilylation of iodo‐BODIPYs using a Pd(P(t Bu)₃)₂/Et₃N/toluene system. Various mono‐ and bis‐silyl‐BODIPYs, mono‐ and bis‐disilanyl‐BODIPYs and bis‐BODIPYs linked by silylene and SiOSi groups were synthesized by using this straightforward method. Silyl‐ and disilanyl‐substitution significantly modifies the spectroscopic properties of the BODIPY, in which the fluorescence quantum yields of the silyl‐BODIPYs are remarkably increased, whereas the emission spectra of disilanyl‐BODIPYs are red‐shifted due to effective σ(SiSi)–π(BODIPY) conjugation.     

Synthesis,Computational Modeling,and Properties of Benzo‐Appended BODIPYs

A series of new functionalized mono‐ and dibenzo‐appended BODIPY dyes were synthesized from a common tetrahydroisoindole precursor following two different synthetic routes. Route A involved the assembly of the BODIPY core prior to aromatization, while in Route B the aromatization step was performed first. In general, Route A gave higher yields of the target dibenzo‐BODIPYs, due to the ease of aromatization of the BODIPYs compared with the corresponding dipyrromethenes, probably due to their higher stability under the oxidative conditions (2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone in refluxing toluene). However, due to the slow oxidation of highly electron‐deficient BODIPY 3 c bearing a meso‐C₆F₅ group, dibenzo‐BODIPY 4 c was obtained, in 35 % overall from dipyrromethane, only by Route B. Computational calculations performed at the 6‐31G(d,p) level are in agreement with the experimental results, showing similar relative energies for all reaction intermediates in both routes. In addition, BODIPY 3 c had the highest molecular electrostatic potential (MEPN), confirming its high electron deficiency and consequent resistance toward oxidation. X‐ray analyses of eight BODIPYs and several intermediates show that benzannulation further enhances the planarity of these systems. The π‐extended BODIPYs show strong red‐shifted absorptions and emissions, about 50–60 nm per benzoannulated ring, at 589–658 and 596–680 nm, respectively. In particular, db‐BODIPY 4 c bearing a meso‐C₆F₅ group showed the longest λ_max of absorption and emission, along with the lowest fluorescence quantum yield (0.31 in CH₂Cl₂); on the other hand monobenzo‐BODIPY 8 showed the highest quantum yield (0.99) of this series. Cellular investigations using human carcinoma HEp2 cells revealed high plasma membrane permeability for all dibenzo‐BODIPYs, low dark‐ and photo‐cytotoxicities and intracellular localization in the cell endoplasmic reticulum, in addition to other organelles. Our studies indicate that benzo‐appended BODIPYs, in particular the highly stable meso‐substituted BODIPYs, are promising fluorophores for bioimaging applications.     

Water‐Soluble Red‐Emitting Distyryl‐Borondipyrromethene (BODIPY) Dyes for Biolabeling

A series of water‐soluble red‐emitting distyryl‐borondipyrromethene (BODIPY) dyes were designed and synthesized by using three complementary approaches aimed at introducing water‐solubilizing groups on opposite faces of the fluorescent core to reduce or completely suppress self‐aggregation. An additional carboxylic acid functional group was introduced at the pseudo‐meso position of the BODIPY scaffold for conjugation to amine‐containing biomolecules/biopolymers. The optical properties of these dyes were evaluated under simulated physiological conditions (i.e., phosphate‐buffered saline (PBS), pH 7.5) or in pure water. The emission wavelength (λ_max) of these labels was found in the 640–660 nm range with quantum yields from modest to unprecedentedly high values (4 to 38 %). The bioconjugation of these distyryl‐BODIPY dyes with bovine serum albumin (BSA) and the monoclonal antibody (mAb) 12A5 was successfully performed under mild aqueous conditions.     

Conformationally Restricted Aza‐Dipyrromethene Boron Difluorides (Aza‐BODIPYs) with High Fluorescent Quantum Yields

A simple approach to the highly fluorescent near‐infrared aza‐BODIPY dyes with higher fluorescence quantum yields (up to 0.81 in toluene) in comparison with their known analogues is presented. Our approach is based on the restricted rotations of the 1,7‐phenyl groups to the mean plane of the aza‐BODIPYs, which is achieved through the installation of bulky substituents on the 1,7‐phenyl groups of aza‐BODIPYs and results in a reduced nonradiative relaxation process in solution. The large torsion angles between the 1,7‐phenyl groups and the aza‐BODIPY core (?₁ and ?₂ in these novel conformationally restricted aza‐BODIPYs) were confirmed by X‐ray diffraction studies.     

Synthesis and Transformations of 5‐Chloro‐2,2′‐Dipyrrins and Their Boron Complexes, 8‐Chloro‐BODIPYs

Symmetric dipyrrylketones 1 a , b were synthesized in two steps from the corresponding α‐free pyrroles, by reaction with thiophosgene followed by oxidative hydrolysis under basic conditions. The dipyrrylketones produced the corresponding 5‐chloro‐dipyrrinium salts or 5‐ethoxy‐dipyrrins on reaction with phosgene or Meerwein’s salt, respectively. Boron complexation of the dipyrrins afforded the corresponding 8‐functionalized BODIPYs (borondipyrromethenes) in high yields. The 5‐chloro‐dipyrrinium salts reacted with methoxide or ethoxide ions to produce monopyrrole esters, presumably via a 5,5‐dialkoxy‐dipyrromethane intermediate. In contrast, 8‐chloro‐BODIPYs underwent a variety of nucleophilic substitutions of the chloro group in the presence of alkoxide ions, Grignard reagents, and thiols. In the presence of excess alkoxide or Grignard reagent, at room temperature or above, substitution at the boron center also occurred. The 8‐chloro‐BODIPY was a particularly useful reagent for the preparation of 8‐aryl‐, 8‐alkyl‐, and 8‐vinyl‐substituted BODIPYs in very high yields, using Pd⁰‐catalyzed Stille cross‐coupling reactions. The X‐ray structures of eleven BODIPYs and two pyrroles are presented, and the spectroscopic properties of the synthesized BODIPYs are discussed.     

New 2,6‐Distyryl‐Substituted BODIPY Isomers: Synthesis,Photophysical Properties,and Theoretical Calculations

A 2,6‐distyryl‐substituted boradiazaindacene (BODIPY) dye and a new series of 2,6‐p‐dimethylaminostyrene isomers containing both α‐ and β‐position styryl substituents were synthesized by reacting styrene and p‐dimethylaminostyrene with an electron‐rich diiodo‐BODIPY. The dyes were characterized by X‐ray crystallography and NMR spectroscopy and their photophysical properties were investigated and analyzed by carrying out a series of theoretical calculations. The absorption spectra contain markedly redshifted absorbance bands due to conjugation between the styryl moieties and the main BODIPY fluorophore. Very low fluorescence quantum yields and significant Stokes shifts are observed for 2,6‐distyryl‐substituted BODIPYs, relative to analogous 3,5‐distyryl‐ and 1,7‐distyryl‐substituted BODIPYs. Although the fluorescence of the compound with β‐position styryl substituents on both pyrrole moieties and one with both β‐ and α‐position substituents was completely quenched, the compound with only α‐position substituents exhibits weak emission in polar solvents, but moderately intense emission with a quantum yield of 0.49 in hexane. Protonation studies have demonstrated that these 2,6‐p‐dimethylaminostyrene isomers can be used as sensors for changes in pH. Theoretical calculations provide strong evidence that styryl rotation and the formation of non‐emissive charge‐separated S₁ states play a pivotal role in shaping the fluorescence properties of these dyes. Molecular orbital theory is used as a conceptual framework to describe the electronic structures of the BODIPY core and an analysis of the angular nodal patterns provides a reasonable explanation for why the introduction of substituents at different positions on the BODIPY core has markedly differing effects.     

Acidic Condensation of BODIPYs with Aldehydes: A Quick and Versatile Route to Alkenyl‐BODIPYs and C(sp3)‐Connected DYEmers

The condensation of aldehydes with BODIPY (boron dipyrrin) luminophores was investigated. Formaldehyde can be used to connect two BODIPYs at each of the three pyrrolic C positions (α‐, β‐, and β′‐positions) in a quick and highly selective manner, yielding new DYEmers (di‐ and oligomeric BODIPY derivatives) with varied photophysical properties. Benzaldehydes form DYEmers only at the β‐ and the β′‐positions. For aliphatic aldehydes the DYEmer formation competes with the elimination of water from a proposed alcohol intermediate, leading to the formation of α‐ and β‐alkenyl‐BODIPYs. 2‐Phenylacetaldehyde and similar precursors exclusively yield elimination products. These acid‐mediated transformations are valuable alternatives to the well‐established, base‐promoted Knoevenagel condensation protocol that is typically employed in the preparation of BODIPYs with near infrared (NIR)‐shifted absorptions.     

Dihydronaphthalene‐Fused Boron–Dipyrromethene (BODIPY) Dyes: Insight into the Electronic and Conformational Tuning Modes of BODIPY Fluorophores

A new series of boron–dipyrromethene (BDP, BODIPY) dyes with dihydronaphthalene units fused to the β‐pyrrole positions ( 1 a – d , 2 ) has been synthesised and spectroscopically investigated. All the dyes, except pH‐responsive 1 d in polar solvents, display intense emission between 550–700 nm. Compounds 1 a and 1 b with a hydrogen atom and a methyl group in the meso position of the BODIPY core show spectroscopic properties that are similar to those of rhodamine 101, thus rendering them potent alternatives to the positively charged rhodamine dyes as stains and labels for less polar environments or for the dyeing of latex beads. Compound 1 d , which carries an electron‐donating 4‐(dimethylamino)phenyl group in the meso position, shows dual fluorescence in solvents more polar than dibutyl ether and can act as a pH‐responsive “light‐up” probe for acidic pH. Correlation of the pK_a data of 1 d and several other meso‐(4‐dimethylanilino)‐substituted BODIPY derivatives allowed us to draw conclusions on the influence of steric crowding at the meso position on the acidity of the aniline nitrogen atom. Preparation and investigation of 2 , which carries a nitrogen instead of a carbon as the meso‐bridgehead atom, suggests that the rules of colour tuning of BODIPYs as established so far have to be reassessed; for all the reported couples of meso‐C‐ and meso‐N‐substituted BODIPYs, the exchange leads to pronounced redshifts of the spectra and reduced fluorescence quantum yields. For 2 , when compared with 1 a , the opposite is found: negligible spectral shifts and enhanced fluorescence. Additional X‐ray crystallographic analysis of 1 a and quantum chemical modelling of the title and related compounds employing density functional theory granted further insight into the features of such sterically crowded chromophores.     

Photoinduced Electron Transfer‐based Halogen‐free Photosensitizers: Covalent meso‐Aryl (Phenyl,Naphthyl, Anthryl,and Pyrenyl) as Electron Donors to Effectively Induce the Formation of the Excited Triplet State and Singlet Oxygen for BODIPY Compounds

Pristine BODIPY compounds have negligible efficiency to generate the excited triplet state and singlet oxygen. In this report, we show that attaching a good electron donor to the BODIPY core can lead to singlet oxygen formation with up to 58 % quantum efficiency. For this purpose, BODIPYs with meso ‐aryl groups (phenyl, naphthyl, anthryl, and pyrenyl) were synthesized and characterized. The fluorescence, excited triplet state, and singlet oxygen formation properties for these compounds were measured in various solvents by UV/Vis absorption, steady‐state and time‐resolved fluorescence methods, as well as laser flash photolysis technique. In particular, the presence of anthryl and pyrenyl showed substantial enhancement on the singlet oxygen formation ability of BODIPY with up to 58 % and 34 % quantum efficiency, respectively, owing to their stronger electron‐donating ability. Upon the increase in singlet oxygen formation, the fluorescence quantum yield and lifetime values of the aryl‐BODIPY showed a concomitant decrease. The increase in solvent polarity enhances the singlet oxygen generation but decreases the fluorescence quantum yield. The results are explained by the presence of intramolecular photoinduced electron transfer from the aryl moiety to BODIPY core. This method of promoting T₁ formation is very different from the traditional heavy atom effect by I, Br, or transition metal atoms. This type of novel photosensitizers may find important applications in organic oxygenation reactions and photodynamic therapy of tumors.     

Tuning the Solid‐State Luminescence of BODIPY Derivatives with Bulky Arylsilyl Groups: Synthesis and Spectroscopic Properties

Boron dipyrromethenes (BODIPYs) with bulky triphenylsilylphenyl(ethynyl) and triphenylsilylphenyl substituents on pyrrole sites were prepared via Hagihara–Sonogashira and Suzuki–Miyaura cross‐coupling with ethynyl‐terminated tetraphenylsilane and boronic acid‐terminated tetraphenylsilane. The chromophores are designed to prevent intermolecular π–π stacking interaction and enhance fluorescence in the solid state. Single crystals of 1 a and 2 b for X‐ray structural analysis were obtained, and weak π–π stacking interactions of the neighboring BODIPY molecules were observed. Spectroscopic properties of all of the dyes in various solvents and in films were investigated. Triphenylsilylphenyl‐substituted BODIPYs generally show more pronounced increases in solid‐state emission than triphenylsilylphenyl(ethynyl)‐substituted BODIPYs. Although the simple BODIPYs do not exhibit any fluorescence in the solid state (Φ=0), arylsilyl‐substituted BODIPYs exhibit weak to moderate solid‐state fluorescence with quantum yields of 0.03, 0.07, 0.10, and 0.25. The structure–property relationships were analyzed on the basis of X‐ray crystallography, optical spectroscopy, cyclic voltammetry, and theoretical calculations.     

Thermally stable red electroluminescent hybrid polymers derived from functionalized silsesquioxane and 4,7‐bis(3‐ethylhexyl‐2‐thienyl)‐2,1,3‐benzothiadiazole

Hyperbranched organic–inorganic hybrid conjugated polymers P1 and P2 were prepared via FeCl₃‐oxiditive polymerization of 4,7‐bis(3‐ethylhexyl‐2‐thienyl)‐2,1,3‐benzothiadiazole ( A ) and octa(3‐ethylhexyl‐2‐thienyl‐phenyl)polyhedral oligomeric silsesquioxane (POSS) ( B ) at different POSS concentrations. Compared to linear polymer PM derived from A , P1 , and P2 exhibit much higher PL quantum efficiency (?_PL‐f) in condensed state with improved thermal stability. ?_PL‐f of P1 and P2 increased by 80% and 400%, and the thermal degradation temperatures of P1 and P2 are increased by 35 °C and 46 °C, respectively. Light‐emitting diodes were fabricated using P1 , P2 , and PM . While the electroluminescent spectra of both P1 and PM show λ_max at 660 nm, P1 exhibits a much narrower EL spectrum and higher electroluminescence (～500%) compared with PM at a same voltage and film thickness. The maximum current efficiency of P1 is more than seven times of that of PM . The turn‐on voltages of the LEDs are in the order of P2 > PM > P1 . LED prepared by blending P1 with MEH‐PPV shows a maximum luminescence of 2.6 × 10³ cd/m² and a current efficiency of 1.40 cd/A, which are more than twice (1.1 × 10³ cd/m²) and five times (0.27 cd/A) of LED of PM /MEH‐PPV blend, respectively. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5661–5670, 2009     

Ru catalyzed cyclodimerization of bis(2‐thienyl)acetylene and bis(3‐thienyl)acetylene. Synthesis properties of 4,5,6‐tris(2‐thienyl)benzo(b)thiophene and 5,6,7‐tris(3‐thienyl)benzo[b]thiophene

Activated dihydridocarbonyltris(triphenylphosphine)ruthenium catalyzes the cyclodimerization of both bis(2‐thienyl)acetylene and bis(3‐thienyl)acetylene to yield, respectively, 4,5,6‐tris(2′‐thienyl)‐benzo[b]thiophene and 5,6,7‐tris(3′‐thienyl)benzo[b]thiophene. These fluoresce in the blue. Both undergo irreversible one electron oxidation at & sim1.1 mV versus Ag/Ag⁺ electrode, consistent with oxidation of the benzo[b]thiophene nuclei rather than the substituent thiophene rings.     

Visible‐Light Photoactive,Highly Efficient Triplet Sensitizers Based on Iodinated Aza‐BODIPYs: Synthesis,Photophysics and Redox Properties

A series of novel iodinated NO₂‐substituted aza‐BODIPYs have been synthesized and characterized. Highly desirable photophysical and photochemical properties were induced in NO₂‐substituted aza‐BODIPYs by iodination of the pyrrole rings. In particular, high values of singlet oxygen quantum yields (Φ_Δ) ranging from 0.79 to 0.85 were measured. The photooxygenation process proceeds via a Type II mechanism under the experimental conditions applied. The compounds studied exhibited an absorption band within the so‐called “therapeutic window”, with λ_max located between 645 nm to 672 nm. They were non‐fluorescent at room temperature with excited singlet‐state lifetimes within the picosecond range as measured by femtosecond transient absorption. Nanosecond laser flash photolysis experiments revealed T₁→T_n absorption spanning from ca. 400 nm to ca. 500 nm and allowed determination of the triplet‐state lifetimes. The estimated triplet lifetimes (τ_T) in deaerated acetonitrile ranged between 2.74 μs and 3.50 μs. As estimated by CV/DPV measurements, all iodinated aza‐BODIPYs studied exhibited one irreversible oxidation and two quasi‐reversible reductions processes. Estimation of the E_HOMO gave the value of ?6.06 to ?6.26 eV while the E_LUMO was found to be located at ca. ?4.6 eV. Thermogravimetric (TGA) analysis revealed that iodinated aza‐BODIPYs were stable up to approximately 300 °C. All compounds studied exhibit high photostability in toluene solution.     

Different hydrogen‐bonded structures in three 2‐thienyl‐substituted tetrahydro‐1,4‐epoxy‐1‐benzazepines

The molecules of (2RS,4SR)‐2‐exo‐(5‐bromo‐2‐thienyl)‐7‐chloro‐2,3,4,5‐tetrahydro‐1H‐1,4‐epoxy‐1‐benzazepine, C₁₄H₁₁BrClNOS, (I), are linked into cyclic centrosymmetric dimers by C—H...π(thienyl) hydrogen bonds. Each such dimer makes rather short Br...Br contacts with two other dimers. In (2RS,4SR)‐2‐exo‐(5‐methyl‐2‐thienyl)‐2,3,4,5‐tetrahydro‐1H‐1,4‐epoxy‐1‐benzazepine, C₁₅H₁₅NOS, (II), a combination of C—H...O and C—H...π(thienyl) hydrogen bonds links the molecules into chains of rings. A more complex chain of rings is formed in (2RS,4SR)‐7‐chloro‐2‐exo‐(5‐methyl‐2‐thienyl)‐2,3,4,5‐tetrahydro‐1H‐1,4‐epoxy‐1‐benzazepine, C₁₅H₁₄ClNOS, (III), built from a combination of two independent C—H...O hydrogen bonds, one C—H...π(arene) hydrogen bond and one C—H...π(thienyl) hydrogen bond.     

Light Harvesting and White‐Light Generation in a Composite of Carbon Dots and Dye‐Encapsulated BSA‐Protein‐Capped Gold Nanoclusters

Several strategies have been adopted to design an artificial light‐harvesting system in which light energy is captured by peripheral chromophores and it is subsequently transferred to the core via energy transfer. A composite of carbon dots and dye‐encapsulated BSA‐protein‐capped gold nanoclusters (AuNCs) has been developed for efficient light harvesting and white light generation. Carbon dots (C‐dots) act as donor and AuNCs capped with BSA protein act as acceptor. Analysis reveals that energy transfer increases from 63 % to 83 % in presence of coumarin dye (C153), which enhances the cascade energy transfer from carbon dots to AuNCs. Bright white light emission with a quantum yield of 19 % under the 375 nm excitation wavelength is achieved by changing the ratio of components. Interesting findings reveal that the efficient energy transfer in carbon‐dot–metal‐cluster nanocomposites may open up new possibilities in designing artificial light harvesting systems for future applications.     

Thieno–Pyrrole‐Fused BODIPY Intermediate as a Platform to Multifunctional NIR Agents

We report the synthesis, photophysical and electrochemical properties, and in vivo fluorescence imaging of a series of new thieno–pyrrole‐fused near‐infrared (NIR) BODIPY agents by using a versatile intermediate as a building block. The versatile thieno–pyrrole‐fused BODIPY intermediate was rationally designed to bear bromo‐substituents and absorb in the mid‐red region (635 nm) to act as an organic electrophile for the development of NIR multifunctional agents. The use of subsequent palladium‐catalyzed and nucleophilic substitution reactions afforded highly conjugated NIR BODIPYs. The novel BODIPYs exhibit long‐wavelength absorptions in the NIR region (650–840 nm). The agents produce sharp fluorescence bands, and most of them display respectable quantum yields of fluorescence (0.05–0.87) useful for biomedical imaging, as demonstrated by in vivo imaging with SBDPiR740 . Interestingly, a number of agents in the series that are non‐halogenated were reactive to O₂ at the triplet photo‐excited state coupled with a favorable redox potential and decent fluorescence, and hence could be potential candidates for use as photosensitizers in fluorescence‐guided photodynamic therapy. Furthermore, the synthetic approach allows further functionalization of the highly conjugated NIR BODIPYs to tune the excited states (PET, ICT) and to conjugate targeting moieties for enhanced biological applications.