Solid‐State Interconversions: Unique 100 % Reversible Transformations between the Ground and Metastable States in Single‐Crystals of a Series of Nickel(II) Nitro Complexes

The solid‐state, low‐temperature linkage isomerism in a series of five square planar group 10 phosphino nitro complexes have been investigated by a combination of photocrystallographic experiments, Raman spectroscopy and computer modelling. The factors influencing the reversible solid‐state interconversion between the nitro and nitrito structural isomers have also been investigated, providing insight into the dynamics of this process. The cis‐[Ni(dcpe)(NO₂)₂] ( 1 ) and cis‐[Ni(dppe)(NO₂)₂] ( 2 ) complexes show reversible 100 % interconversion between the η¹‐NO₂ nitro isomer and the η¹‐ONO nitrito form when single‐crystals are irradiated with 400 nm light at 100 K. Variable temperature photocrystallographic studies for these complexes established that the metastable nitrito isomer reverted to the ground‐state nitro isomer at temperatures above 180 K. By comparison, the related trans complex [Ni(PCy₃)₂(NO₂)₂] ( 3 ) showed 82 % conversion under the same experimental conditions at 100 K. The level of conversion to the metastable nitrito isomers is further reduced when the nickel centre is replaced by palladium or platinum. Prolonged irradiation of the trans‐[Pd(PCy₃)₂(NO₂)₂] ( 4 ) and trans‐[Pt(PCy₃)₂(NO₂)₂] ( 5 ) with 400 nm light gives reversible conversions of 44 and 27 %, respectively, consistent with the slower kinetics associated with the heavier members of group 10. The mechanism of the interconversion has been investigated by theoretical calculations based on the model complex [Ni(dmpe)Cl(NO₂)].     

Reactions of mer(exo)‐ and mer(endo)‐[Co(dien)(dapo)X]2+ Isomers (X=OH,Cl, ONO2, N3)

Properties indirectly determined, or alluded to, in previous publications on the titled isomers have been measured, and the results generally support the earlier conclusions. Thus, the common five‐coordinate intermediate generated in the OH^?‐catalyzed hydrolysis of exo‐ and endo‐[Co(dien)(dapo)X]²⁺ (X=Cl, ONO₂) has the same properties as that generated in the rapid spontaneous loss of OH^? from exo‐ and endo‐[Co(dien)(dapo)OH]²⁺ (40±2% endo‐OH, 60±2% exo‐OH) and an unusually large capacity for capturing (R=[CoN₃]/[CoOH][]=1.3; exo‐[CoN₃]/endo‐[CoN₃]=2.1±0.1). Solvent exchange for spontaneous loss of OH^? from exo‐[Co(dien)(dapo)OH]²⁺ has been measured at 0.04 s^?1 (k₁, 0.50M NaClO₄, 25°) from which similar loss from the endo‐OH isomer may be calculated as 0.24 s^?1 (k₂). The OH^?‐catalyzed reactions of exo‐ and endo‐[Co(dien)(dapo)N₃]²⁺ result in both hydrolysis of coordinated via an OH^?‐limiting process =153 M ^?1 s^?1; =295 M ^?1 s^?1; K_H=1.3±0.1 M ^?1; 0.50M NaClO₄, 25.0°) and direct epimerization between the two reactants =33 M ^?1 s^?1; =110 M ^?1 s^?1; 1.0M NaClO₄, 25.0°). Comparisons are made with other rapidly reacting Co^III‐acido systems.     

Stereoselectivity in Diphos Addition to Molybdenum Complex with Pyridine‐2‐thionate (pyS) and η3‐Methallyl Coordinated Ligands

The conformational isomers endo‐ and exo‐[Mo{η³‐C₃H₄(CH₃)}(η²‐pyS)(CO)(η²‐diphos)] (diphos: dppm = {bis(diphenylphosphino)methane}, 2 ; dppe = {1,2‐bis(diphenylphosphino)ethane}, 3 ) are prepared by reacting the double‐bridged pyridine‐2‐thionate (pyS) complex [Mo{η³‐C₃H₄(CH₃)}(CO)₂]₂(η¹:η²:μ‐pyS)₂, 1 with diphos in refluxing acetonitrile. Stereoselectivity of the methallyl, C₃H₄(CH₃), ligand improves the formation of the exo‐conformation of 2 and 3 . Orientations and spectroscopy of these complexes are discussed.     

Regioisomeric 4‐nitroindazole N1‐ and N2‐(β‐d‐ribonucleosides)

The structures of the isomeric nucleosides 4‐nitro‐1‐(β‐d ‐ribo­furan­osyl)‐1H‐indazole, C₁₂H₁₃N₃O₆, (I), and 4‐nitro‐2‐(β‐d ‐ribo­furan­osyl)‐2H‐indazole, C₁₂H₁₃N₃O₆, (II), have been determined. For compound (I), the conformation of the gly­cosylic bond is anti [χ = −93.6 (6)°] and the sugar puckering is C2′‐exo–C3′‐endo. Compound (II) shows two conformations in the crystalline state which differ mainly in the sugar pucker; type 1 adopts the C2′‐endo–C3′‐exo sugar puckering associated with a syn base orientation [χ = 43.7 (6)°] and type 2 shows C2′‐exo–C3′‐endo sugar puckering accompanied by a somewhat different syn base orientation [χ = 13.8 (6)°].     

Synthesis,X‐Ray Crystal‐Structure Analysis,and NMR Studies of (η3‐Allyl)palladium(II) Complexes Containing a Novel Dihydro(phosphinoaryl)oxazine Ligand: Application in Palladium‐Catalyzed Asymmetric Synthesis

The novel chiral P,N‐ligand 2‐[2‐(diphenylphosphino)phenyl]‐5,6‐dihydro‐4‐phenyl‐4H‐1,3‐oxazine ( 4 ) was synthesized. The corresponding {dihydro[(phosphino‐ϰP)aryl]oxazine‐ϰN} (η³‐diphenylallyl)palladium(II) hexafluorophosphate 5 and the analogous [Pd(η³‐1,3‐dimethylallyl)] complex 6 were investigated by X‐ray analysis and 1D‐ and 2D‐NMR spectroscopy. The complex 5 exists as `exo'‐syn‐syn isomer in the solid state (Fig. 1). In solution, the same isomer exceeds with 90%. The X‐ray crystal structure of 6 reveals that the dihydro(phosphinoaryl)oxazine ligand coordinates in a pseudo‐enantiomeric conformation compared with that of 5 (Fig. 3). A syn‐anti arrangement of the allyl substituents of 6 is favored in the solid state. <sup>1</sup>H‐NMR Spectroscopic investigations suggest that the auxiliary 6 adopts two conformations. This conformational instability together with `exo'/`endo' and syn/anti isomerization leads to the formation of 6 isomers (Fig. 4). The asymmetric allylic substitution reaction of 1,3‐diphenylallyl acetate with dimethyl malonate in the presence of 4 proceeds with a selectivity of 99% ee. The ee induced by 4 in the catalytic allylic substitution of 1‐methylbut‐2‐enyl acetate is moderate (54%).     

Polymerization of carboxylic ester functionalized norbornenes catalyzed by (η3‐allyl)palladium complexes bearing N‐heterocyclic carbene ligands

An in situ generated cationic allylpalladium complex bearing N‐heterocyclic carbene (NHC) ligands, derived from the reaction of [(η³‐C₃H₅)Pd(NHC)Cl] with AgX (X = BF₄ or SbF₆), is an active catalyst for the addition polymerization of norbornene and norbornene derivatives [5‐norbornene‐2‐carboxylic acid methyl ester ( b ) and 5‐norbornene‐2‐carboxylic acid n‐butyl ester ( c )] with an ester group containing a large portion of endo‐isomers. The catalytic activities, polymer yields, molecular weights, and molecular weight distributions of polynorbornenes were investigated under various reaction conditions: the catalytic activity was highly dependent on the counteranion, the reaction solvent, and the reaction temperature. For b , as the portion of an endo‐isomer increased, the activity of 13 (SbF) was much higher than those of 14 and 15 , and for c (exo/endo = 95:5), the maximum turn over number (TON) was observed with 15 (SbF). © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3042–3052, 2007     

The exo and endo isomers of [N,N′‐bis­(salicyl­idene)‐1,2‐di­phenyl‐(RS,SR)‐1,2‐ethane­diyl­diamin­ato]­oxo­vanadium(IV)

The title complexes, exo‐ and endo‐[VO(C₂₈H₂₂N₂O₂)], show monomeric structures with a distorted square‐pyramidal coordination. The two phenyl groups on the five‐membered N,N′‐chelate ring are both on the same side as the oxo ligand for the exo isomer and on opposite sides for the endo isomer.     

Synthesis,Reactivity, and Crystal Structure of the η2‐Thiocarbamoyl Palladium Complex [Pd(PPh3)2(η2‐SCNMe2)][PF6]

The η¹‐thiocarbamoyl palladium complexes [Pd(PPh₃)(η¹‐SCNMe₂)(η²‐S₂R)] (R = P(OEt)₂, 2 ; CNEt₂, 3 ) and trans‐[Pd(PPh₃)₂(η¹‐SCNMe₂)(η¹‐Spy)], 4 , (pyS: pyridine‐2‐thionate) are prepared by reacting the η²‐thiocarbamoyl palladium complex [Pd(PPh₃)₂(η²‐SCNMe₂)][PF₆], 1 with (EtO)₂PS₂NH₄, Et₂NCS₂Na, and pySK in methanol at room temperature, respectively. Treatment of 1 with dppm (dppm: bis(diphenylphosphino)methane) in dichloromethane at room temperature gives complex [Pd(PPh₃)(η¹‐SCNMe₂)(η²‐dppm)] [PF₆], 5 . All of the complexes are identified by spectroscopic methods and complex 1 is determined by single‐crystal X‐ray diffraction.     

μ3‐η2:η2:η2‐Coordination of Primary Silane on a Triruthenium Plane

A μ₃‐η²:η²:η²‐silane complex, [(Cp*Ru)₃(μ₃‐η²:η²:η²‐H₃SitBu)(μ‐H)₃] ( 2 a ; Cp*=η⁵‐C₅Me₅), was synthesized from the reaction of [{Cp*Ru(μ‐H)}₃(μ₃‐H)₂] ( 1 ) with tBuSiH₃. Complex 2 a is the first example of a silane ligand adopting a μ₃‐η²:η²:η² coordination mode. This unprecedented coordination mode was established by NMR and IR spectroscopy as well as X‐ray diffraction analysis and supported by a density functional study. Variable‐temperature NMR analysis implied that 2 a equilibrates with a tautomeric μ₃‐silyl complex ( 3 a ). Although 3 a was not isolated, the corresponding μ₃‐silyl complex, [(Cp*Ru)₃(μ₃‐η²:η²‐H₂SiPh)(H)(μ‐H)₃] ( 3 b ), was obtained from the reaction of 1 with PhSiH₃. Treatment of 2 a with PhSiH₃ resulted in a silane exchange reaction, leading to the formation of 3 b accompanied by the elimination of tBuSiH₃. This result indicates that the μ₃‐silane complex can be regarded as an “arrested” intermediate for the oxidative addition/reductive elimination of a primary silane to a trinuclear site.     

Synthesis and Crystal Structures of the Molybdenum(II) Complexes with the N,N‐dimethylthiocarbamoyl Containing Ligand: Crystal Structures of [Mo(CO)2(η2‐S2COEt)(η2‐SCNMe2)(PPh3)] and [Mo(CO)2(η2‐S2CNC4H8)(η2‐SCNMe2)(PPh3)]

The reaction of the thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐SCNMe₂)(PPh₃)₂Cl] 1 , with EtOCS2K and C4H8NCS2NH4 in dichloromethane at room temperature yielded the seven coordinated ethyldithiocarbonate thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐S₂COEt)(η²‐SCNMe₂)(PPh₃)] 2 , and the dithiocarbamate thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐S₂CNC₄H₈)(η²‐SCNMe₂)(PPh₃)] 3 . The geometry around the metal atom of compounds 2 and 3 are capped octahedrons as revealed by X‐ray diffraction analyses. The thiocarbamoyl and ethyldithiocarbonate or pyrrolidinyldithiocarbamate ligands coordinate to the molybdenum metal center through the carbon and sulfur and two sulfur atoms, respectively. Structure parameters, NMR, IR and Mass spectra are in agreement with the crystal chemistry of the two compounds.     

Variable Bonding Modes of Pyrimidine‐2‐thione in PdII/PtII Complexes [M(η2‐N,S‐pymS)(η1‐S‐pymS)(PPh3)] and [M(η1‐S‐pymS)2(L‐L)] (L‐L = dppm,dppe)

Reactions of pyrimidine‐2‐thione (HpymS) with Pd^II/Pt^IV salts in the presence of triphenyl phosphine and bis(diphenylphosphino)alkanes, Ph₂P‐(CH₂)_m‐PPh₂ (m = 1, 2) have yielded two types of complexes, viz. a) [M(η²‐N, S‐ pymS)(η¹‐S‐ pymS)(PPh₃)] (M = Pd, 1 ; Pt, 2 ), and (b) [M(η¹‐S‐pymS)₂(L‐L)] {L‐L, M = dppm (m = 1) Pd, 3 ; Pt, 4 ; dppe (m = 2), Pd, 5 ; Pt, 6 }. Complexes have been characterized by elemental analysis (C, H, N), NMR spectroscopy (¹H, ¹³C, ³¹P), and single crystal X‐ray crystallography ( 1 , 2 , 4 , and 5 ). Complexes 1 and 2 have terminal η¹‐S and chelating η²‐N, S‐modes of pymS⁻, while other Pd/Pt complexes have only terminal η¹‐S modes. The solution state ³¹P NMR spectral data reveal dynamic equilibrium for the complexes 3 , 5 and 6 , whereas the complexes 1 , 2 and 4 are static in solution state.     

Dimeric Structure of [(η2‐NO3)2(tpy)Bi(μ‐OH)2Bi(tpy)(η2‐NO3)2]

The synthesis and single crystal X‐ray structure determination are reported for the 2,2′ : 6′,2″‐terpyridine (= tpy) adduct of bismuth(III) nitrate. The hydroxide‐bridged dimer [(η²‐NO₃)₂(tpy)Bi(μ‐OH)₂Bi(tpy)(η²‐NO₃)₂] with nine‐coordinate geometry about Bi was the only isolable product from all crystallization attempts in varying ratios of Bi(NO₃) : terpy.; [(η²‐NO₃)₂(tpy)Bi(μ‐OH)₂Bi(tpy) · (η²‐NO₃)₂] is triclinic, P 1, a = 7.941(8), b = 10.732(9), c = 11.235(9) Å; α = 63.05(1), β = 85.01(1), γ = 79.26(1)°, Z = 1, dimer, R = 0.058 for N₀ = 2319.     

Mononuclear Complexes of Platinum Group Metals Containing η6‐ and η5‐Cyclic Π‐Perimeter Hydrocarbon and Pyridylpyrazolyl Derivatives: Syntheses and Structural Studies

Piano‐stool‐shaped platinum group metal compounds, stable in the solid state and in solution, which are based on 2‐(5‐phenyl‐1H‐pyrazol‐3‐yl)pyridine ( L ) with the formulas [(η⁶‐arene)Ru( L )Cl]PF₆ {arene = C₆H₆ ( 1 ), p‐cymene ( 2 ), and C₆Me₆, ( 3 )}, [(η⁶‐C₅Me₅)M( L )Cl]PF₆ {M = Rh ( 4 ), Ir ( 5 )}, and [(η⁵‐C₅H₅)Ru(PPh₃)( L )]PF₆ ( 6 ), [(η⁵‐C₅H₅)Os(PPh₃)( L )]PF₆ ( 7 ), [(η⁵‐C₅Me₅)Ru(PPh₃)( L )]PF₆ ( 8 ), and [(η⁵‐C₉H₇)Ru(PPh₃)( L )]PF₆ ( 9 ) were prepared by a general method and characterized by NMR and IR spectroscopy and mass spectrometry. The molecular structures of compounds 4 and 5 were established by single‐crystal X‐ray diffraction. In each compound the metal is connected to N1 and N11 in a k² manner.     

Ansa‐Complexes of [Mn(η5‐C5H5)(η6‐C6H6)]: Preparation,Characterization, and Reactivity of [n]Manganoarenophanes (n=1, 2, 3)

We report the synthesis of [n]manganoarenophanes (n=1, 2) featuring boron, silicon, germanium, and tin as ansa‐bridging elements. Their preparation was achieved by salt‐elimination reactions of the dilithiated precursor [Mn(η⁵‐C₅H₄Li)(η⁶‐C₆H₅Li)]?pmdta (pmdta=N,N,N′,N′,N′′‐pentamethyldiethylenetriamine) with corresponding element dichlorides. Besides characterization by multinuclear NMR spectroscopy and elemental analysis, the identity of two single‐atom‐bridged derivatives, [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] and [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SiPh₂], could also be determined by X‐ray structural analysis. We investigated for the first time the reactivity of these ansa‐cyclopentadienyl–benzene manganese compounds. The reaction of the distannyl‐bridged complex [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)Sn₂tBu₄] with elemental sulfur was shown to proceed through the expected oxidative addition of the Sn?Sn bond to give a triatomic ansa‐bridge. The investigation of the ring‐opening polymerization (ROP) capability of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] with [Pt(PEt₃)₃] showed that an unexpected, unselective insertion into the C_ipso?Sn bonds of [Mn(η⁵‐C₅H₄)(η⁶‐C₆H₅)SntBu₂] had occurred.     

Dinuclear Rare‐Earth Metal Alkyl Complexes Supported by Indolyl Ligands in μ‐η2:η1:η1 Hapticities and their High Catalytic Activity for Isoprene 1,4‐cis‐Polymerization

Two series of new dinuclear rare‐earth metal alkyl complexes supported by indolyl ligands in novel μ‐η²:η¹:η¹ hapticities are synthesized and characterized. Treatment of [RE(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of 3‐(tBuN?CH)C₈H₅NH ( L₁ ) in THF gives the dinuclear rare‐earth metal alkyl complexes trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH(CH₂SiMe₃)}Ind)RE(thf)(CH₂SiMe₃)]₂ (Ind=indolyl, RE=Y, Dy, or Yb) in good yields. In the process, the indole unit of L₁ is deprotonated by the metal alkyl species and the imino C?N group is transferred to the amido group by alkyl CH₂SiMe₃ insertion, affording a new dianionic ligand that bridges two metal alkyl units in μ‐η²:η¹:η¹ bonding modes, forming the dinuclear rare‐earth metal alkyl complexes. When L₁ is reduced to 3‐(tBuNHCH₂)C₈H₅NH ( L₂ ), the reaction of [Yb(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of L₂ in THF, interestingly, generated the trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (major) and cis‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (minor) complexes. The catalytic activities of these dinuclear rare‐earth metal alkyl complexes for isoprene polymerization were investigated; the yttrium and dysprosium complexes exhibited high catalytic activities and high regio‐ and stereoselectivities for isoprene 1,4‐cis‐polymerization.     

(η3-allyl)palladium(II) catalysts for the addition polymerization of norbornene derivatives with functional groups

Cycloaliphatic polyolefins with functional groups were prepared by the Pd(II)-catalyzed addition polymerization of norbornene derivatives. Homo- and copolymers containing repeating units based on bicyclo[2.2.1] hept-5-en-2-ylmethyl decanoate (endo/exo-ratio = 80/20), bicyclo[2.2.1]hept-5-ene-2-carboxylic acid methyl ester (exo/endo = 80/20), bicyclo[2.2.1]hept-5-ene-2-methanol (endo/exo = 80/20), and bicyclo[2.2.1]hept-5-ene-2-carboxylic acid (100% endo) were prepared in 49–99% yields with {(η³-allyl)Pd(BF₄)} and {(η³-allyl)Pd(SbF₆)} as catalysts. The catalyst containing the hexafluoroantimonate ion was slightly more active than the tetrafluoroborate based Pd-complex.     

Chloro(η6‐p‐cymene)(phosphoramidite)ruthenium(II), a 16‐Electron Fragment Stabilized by an η2‐Aryl–Metal Interaction,and Its Use in Asymmetric Cyclopropanation

Chloride abstraction from the half‐sandwich complexes [RuCl₂(η⁶‐p‐cymene)(P*‐κP)] ( 2a : P* = (S_a,R,R)‐ 1a = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐1‐phenylethyl)]phosphoramidite; 2b : P* = (S_a,R,R)‐ 1b = (1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl bis[(1R)‐(1‐(1‐naphthalen‐1‐yl)ethyl]phosphoramidite) with (Et₃O)[PF₆] or Tl[PF₆] gives the cationic, 18‐electron complexes dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐phenyl]ethyl}[(1R)‐1‐phenylethyl]phosphoramidite‐κP}ruthenium(II) hexafluorophosphate ( 3a ) and [Ru(S)]‐dichloro(η⁶‐p‐cymene){(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl {(1R)‐1‐[(1,2‐η)‐naphthalen‐1‐yl]ethyl}[(1R)‐1‐(naphthalen‐1‐yl)ethyl]phosphoramidite‐κP)ruthenium(II) hexafluorophosphate ( 3b ), which feature the η²‐coordination of one aryl substituent of the phosphoramidite ligand, as indicated by ¹H‐, ¹³C‐, and ³¹P‐NMR spectroscopy and confirmed by an X‐ray study of 3b . Additionally, the dissociation of p‐cymene from 2a and 3a gives dichloro{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐(1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP)ruthenium(II) ( 4a ) and di‐μ‐chlorobis{(1S_a)‐[1,1′‐binaphthalene]‐2,2′‐diyl [(1R)‐1‐(η⁶‐phenyl)ethyl][(1R)‐1‐phenylethyl]phosphoramidite‐κP}diruthenium(II) bis(hexafluorophosphate) ( 5a ), respectively, in which one phenyl group of the N‐substituents is η⁶‐coordinated to the Ru‐center. Complexes 3a and 3b catalyze the asymmetric cyclopropanation of α‐methylstyrene with ethyl diazoacetate with up to 86 and 87% ee for the cis‐ and the trans‐isomers, respectively.     

2‐Amino‐8‐(2‐deoxy‐2‐fluoro‐β‐d‐arabinofuranosyl)imidazo[1,2‐a][1,3,5]triazin‐4(8H)‐one monohydrate,a 2′‐deoxyguanosine analogue with an altered Watson–Crick recognition site

The title compound, C₁₀H₁₂FN₅O₄·H₂O, shows an anti glycosyl orientation [χ = −123.1 (2)°]. The 2‐deoxy‐2‐fluoroarabinofuranosyl moiety exhibits a major C2′‐endo sugar puckering (S‐type, C2′‐endo–C1′‐exo, ²T₁), with P = 156.9 (2)° and τ_m = 36.8 (1)°, while in solution a predominantly N conformation of the sugar moiety is observed. The conformation around the exocyclic C4′—C5′ bond is −sc (trans, gauche), with γ = −78.3 (2)°. Both nucleoside and solvent molecules participate in the formation of a three‐dimensional hydrogen‐bonding pattern via intermolecular N—H...O and O—H...O hydrogen bonds; the N atoms of the heterocyclic moiety and the F substituent do not take part in hydrogen bonding.     

7‐Amino‐1‐(2‐deoxy‐β‐erythro‐pentofuranosyl)‐1H‐1,2,3‐triazolo[4,5‐d]pyrimidine: an 8‐azaadenine nucleoside with the nucleobase in a syn conformation

The title compound, C₉H₁₂N₆O₃, shows a syn‐glycosylic bond orientation [χ = 64.17 (16)°]. The 2′‐deoxyfuranosyl moiety exhibits an unusual C1′‐exo–O4′‐endo (₁T⁰; S‐type) sugar pucker, with P = 111.5 (1)° and τ_m = 40.3 (1)°. The conformation at the exocyclic C4′—C5′ bond is +sc (gauche), with γ = 64.4 (1)°. The two‐dimensional hydrogen‐bonded network is built from intermolecular N—H...O and O—H...N hydrogen bonds. An intramolecular bifurcated hydrogen bond, with an amino N—H group as hydrogen‐bond donor and the ring and hydroxymethyl O atoms of the sugar moiety as acceptors, constrains the overall conformation of the nucleoside.     

Preparation and Reactivity of Mo(NCMe)(η2‐C2Ph2)2(η4‐C4Ph4)

Reaction of Mo(CO)(η²‐C₂Ph₂)₂(η⁴‐C₄Ph₄) and Me₃NO in acetonitrile solvent affords Mo(NCMe)(η²‐C₂Ph₂)₂(η⁴‐C₄Ph₄) 1 . Compound 1 reacts with trimethylphosphine to produce Mo(PMe₃)(η²‐C₂Ph₂)₂(η⁴‐C₄Ph₄) 2 , or reacts with diphenylacetylene to produce (η⁵‐C₅Ph₅)₂Mo 3 and Mo(η²‐O₂CPh)(η⁴‐C₄Ph₄H)(η⁴‐C₄Ph₄) 4 . The molecular structures of 1, 2 and 4 have been determined by an X‐ray diffraction study.